HP-SN-IGMP-MIB
Standard SNMP MIB module defining data structures for HP-SN-IGMP-MIB.
Imported Objects
Objects
16 total| Object Name |
|---|
snIgmpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.5.6.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4526.100.5.6.1 |
snIgmpQueryIntervalThis is the time interval at which this entity sends out
IGMP host query packets. For a router, snDvmrpEnable must
have been set to 'enabled' before this object is writen.
For a switch, snSwGroupIpMcastMode must have been set to
'enabled' and snSwIpMcastQuerierMode must have been set
to 'querier' before this object is writen.rw INTEGER .1.3.6.1.4.1.4526.100.5.6.1.1 |
snIgmpGroupMembershipTimeThis is the time interval after which a group is considered
inactive. For a router, snDvmrpEnable must have been set to
'enabled' before this object is writen. For a switch,
snSwGroupIpMcastMode must have been set to 'enabled' before
this object is writen.rw INTEGER .1.3.6.1.4.1.4526.100.5.6.1.2 |
snIgmpIfTableThis table comprises of a list of IGMP interface entries. SEQUENCE OF SnIgmpIfEntry .1.3.6.1.4.1.4526.100.5.6.1.3 |
snIgmpIfEntryAn entry (conceptual row) contains the group
membership information for that port. SnIgmpIfEntry .1.3.6.1.4.1.4526.100.5.6.1.3.1 |
snIgmpIfEntryIndexThe table entry index.ro INTEGER .1.3.6.1.4.1.4526.100.5.6.1.3.1.1 |
snIgmpIfPortNumberThis is the interface on which the group was learnt.ro INTEGER .1.3.6.1.4.1.4526.100.5.6.1.3.1.2 |
snIgmpIfGroupAddressThe group address learnt from the interface.ro IpAddress .1.3.6.1.4.1.4526.100.5.6.1.3.1.3 |
snIgmpIfGroupAgeThis is the interval (seconds) after which the group
information will be aged out.ro INTEGER .1.3.6.1.4.1.4526.100.5.6.1.3.1.4 |
snIgmpStaticGroupTableThis table comprises of a list of IGMP static group entries. SEQUENCE OF SnIgmpStaticGroupEntry .1.3.6.1.4.1.4526.100.5.6.1.4 |
snIgmpStaticGroupEntryAn entry (conceptual row) contains the IGMP static group
membership information. SnIgmpStaticGroupEntry .1.3.6.1.4.1.4526.100.5.6.1.4.1 |
snIgmpStaticGroupIfIndexThe interface of which the static group was configured.ro INTEGER .1.3.6.1.4.1.4526.100.5.6.1.4.1.1 |
snIgmpStaticGroupAddressThe group address of which the static group was configured.ro IpAddress .1.3.6.1.4.1.4526.100.5.6.1.4.1.2 |
snIgmpStaticGroupPortListA list of ports which are the port membership of the
static group. Each port is a 16-bit integer ifIndex.rw OCTET STRING .1.3.6.1.4.1.4526.100.5.6.1.4.1.3 |
snIgmpStaticGroupRowStatusTo create or delete a static group entry.rw Enumeration .1.3.6.1.4.1.4526.100.5.6.1.4.1.4 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.