HP-ICF-GPPC-MIB
This MIB module is for HP proprietary General Purpose Packet Control (GPPC)
Main OID:
hpicfGppcMIB.1.3.6.1.4.1.25506.11.1.41
35
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
hpicfGppcMIBThis MIB module is for HP proprietary
General Purpose Packet Control (GPPC) MODULE-IDENTITY .1.3.6.1.4.1.25506.11.1.41 |
hpicfGppcConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.41.1 |
hpicfGppcMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.41.1.1 |
hpicfGppcMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.41.1.2 |
hpicfGppcAppControlTableThe application control table. This keeps track
of the applications that use GPPC, the policies
set by these applications, and information on
where/when/how to apply these policies.
This information includes the interfaces and VLANs
where the policy should be applied, whether it
should be applied at ingress or egress, and when it
should expire. SEQUENCE OF HpicfGppcAppControlEntry .1.3.6.1.4.1.25506.11.1.41.2 |
hpicfGppcAppControlEntryAn entry in the application control table. HpicfGppcAppControlEntry .1.3.6.1.4.1.25506.11.1.41.2.1 |
hpicfGppcAcAppNameName of the application that last modified this
row. All applications of the same type should use
the same name and should use different instance
identifiers to identify themselves uniquely.
This is a printable string up to 16 bytes in size. SnmpAdminString .1.3.6.1.4.1.25506.11.1.41.2.1.1 |
hpicfGppcAcAppInstanceInstance identifier of the application. This is
used to distinguish between different instances of
the same application.
This is a printable string up to 16 bytes in size. SnmpAdminString .1.3.6.1.4.1.25506.11.1.41.2.1.2 |
hpicfGppcAcPolicyNameName of the policy. Each policy is uniquely
identified by its name. It is possible to apply the
same policy in different manners to different
interfaces and VLANs.
This is a printable string up to 64 characters in
size. HpicfGppcPolicyName .1.3.6.1.4.1.25506.11.1.41.2.1.3 |
hpicfGppcAcIngressIfListList of interfaces to which this policy applies at
ingress.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.11.1.41.2.1.4 |
hpicfGppcAcIngressVlanMap1kA string of octets containing one bit per VLAN for
VLANS with vlan index values of 0 through 1023.
The first octet corresponds to VLANs with
vlan index values of 0 through 7, the second
octet to VLANs 8 through 15, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at ingress, the corresponding bit is set to '1'.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.5 |
hpicfGppcAcIngressVlanMap2kA string of octets containing one bit per VLAN for
VLANS with vlan index values of 1024 through 2047.
The first octet corresponds to VLANs with
vlan index values of 1024 through 1031, the second
octet to VLANs 1032 through 1039, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at ingress, the corresponding bit is set to '1'.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.6 |
hpicfGppcAcIngressVlanMap3kA string of octets containing one bit per VLAN for
VLANS with vlan index values of 2048 through 3071.
The first octet corresponds to VLANs with
vlan index values of 2048 through 2055, the second
octet to VLANs 2056 through 2063, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at ingress, the corresponding bit is set to '1'.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.7 |
hpicfGppcAcIngressVlanMap4kA string of octets containing one bit per VLAN for
VLANS with vlan index values of 3072 through 4095.
The first octet corresponds to VLANs with
vlan index values of 3072 through 3079, the second
octet to VLANs 3080 through 3087, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at ingress, the corresponding bit is set to '1'.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.8 |
hpicfGppcAcEgressIfListList of interfaces to which this policy applies at
egress.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.11.1.41.2.1.9 |
hpicfGppcAcEgressVlanMap1kA string of octets containing one bit per VLAN for
VLANS with vlan index values of 0 through 1023.
The first octet corresponds to VLANs with
vlan index values of 0 through 7, the second
octet to VLANs 8 through 15, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at egress, the corresponding bit is set to '1'.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.10 |
hpicfGppcAcEgressVlanMap2kA string of octets containing one bit per VLAN for
VLANS with vlan index values of 1024 through 2047.
The first octet corresponds to VLANs with
vlan index values of 1024 through 1031, the second
octet to VLANs 1032 through 1039, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at egress, the corresponding bit is set to '1'.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.11 |
hpicfGppcAcEgressVlanMap3kA string of octets containing one bit per VLAN for
VLANS with vlan index values of 2048 through 3071.
The first octet corresponds to VLANs with
vlan index values of 2048 through 2055, the second
octet to VLANs 2056 through 2063, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at egress, the corresponding bit is set to '1'.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.12 |
hpicfGppcAcEgressVlanMap4kA string of octets containing one bit per VLAN for
VLANS with vlan index values of 3072 through 4095.
The first octet corresponds to VLANs with
vlan index values of 3072 through 3079, the second
octet to VLANs 3080 through 3087, etc. The most
significant bit of each octet corresponds to the
lowest vlan index value in that octet.
For each VLAN that this policy should apply to
at egress, the corresponding bit is set to '1'.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.13 |
hpicfGppcAcExpPolicyExpiration policy. This indicates whether a policy
should expire automatically.
'permanent' means a policy should never expire
automatically.rw Enumeration .1.3.6.1.4.1.25506.11.1.41.2.1.14 |
hpicfGppcAcExpStringExpiration string. This is used in conjuntion with
hpicfGppcAcExpPolicy to indicate when a policy
should expire automatically.
The value stored in this object is interpreted
differently for different expiration policies. When
the expiration policy is 'permanent', this value is
ignored.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.15 |
hpicfGppcAcLastErrorCodeError code of the last error that occurred. A
non-zero value indicates that the last operation
performed by this instance of the application on the
named policy did not succeed. A detailed
description of the error is available in
hpicfGppcAcLastErrorString.ro Enumeration .1.3.6.1.4.1.25506.11.1.41.2.1.16 |
hpicfGppcAcLastErrorStringDescription of the last error that occurred. This
is a printable ASCII string that describes the error
in some detail.ro OCTET STRING .1.3.6.1.4.1.25506.11.1.41.2.1.17 |
hpicfGppcAcRowAdminStatusAdministrative status of this row. The named policy
in this row is applied to the interfaces and/or
VLANs by this instance of the application only when
the administrative status is enabled. This is the
main on/off switch for the row. The row status must
be active for this switch to have an effect.rw Enumeration .1.3.6.1.4.1.25506.11.1.41.2.1.18 |
hpicfGppcAcRowStatusStatus of this row. Row status must be active, and
the admin status (see hpicfGppcAcRowAdminStatus)
must be enabled for this row to be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.41.2.1.19 |
hpicfGppcNamedPolicyTableThe named policy table. This table lists the name
and type of all policies that are applied via GPPC. SEQUENCE OF HpicfGppcNamedPolicyEntry .1.3.6.1.4.1.25506.11.1.41.3 |
hpicfGppcNamedPolicyEntryAn entry in the named policy table. HpicfGppcNamedPolicyEntry .1.3.6.1.4.1.25506.11.1.41.3.1 |
hpicfGppcNpPolicyNameName of the policy. The name of a policy is its
unique identification. It is a printable string
in ASCII characters. It can be up to 64 characters
in length HpicfGppcPolicyName .1.3.6.1.4.1.25506.11.1.41.3.1.1 |
hpicfGppcNpPolicyTypeType of the policy. A policy type of
'mac-based-mirroring' indicates that the policy is
used to mirror traffic based on the MAC address of
the source or destination.rw Enumeration .1.3.6.1.4.1.25506.11.1.41.3.1.2 |
hpicfGppcNpRowStatusStatus of this row. The named policy must be
active before rules can be added to it or removed
from it. A newly created policy will remain in
notReady state until it is given a valid policy type
(see hpicfGppcNpPolicyType).
A row in the named policy table can not be deleted
if the named policy is referenced by a row in the
application control table. The application
control entries that refer to this row must be
deleted before this row can be deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.41.3.1.3 |
hpicfGppcPolicyRulesTableThe policy rules table. A policy can consist of
multiple rules. All of the rules of a policy are
listed in this table. Each rule consists of a
string and a numeric identifier - the rule id. SEQUENCE OF HpicfGppcPolicyRulesEntry .1.3.6.1.4.1.25506.11.1.41.4 |
hpicfGppcPolicyRulesEntryAn entry in the policy rules table. HpicfGppcPolicyRulesEntry .1.3.6.1.4.1.25506.11.1.41.4.1 |
hpicfGppcPrRuleIdNumeric identifier of the rule. The rules in a
policy are processed sequentially in increasing
order of their rule ids. These numeric ids are
generated by the application that creates the
policy. Rules within a policy have unique rule
ids. Integer32 .1.3.6.1.4.1.25506.11.1.41.4.1.1 |
hpicfGppcPrPolicyRuleRule string. This is a string that represents one
rule in the policy. A policy can consist of one or
many rules.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.41.4.1.2 |
hpicfGppcPrRowStatusStatus of this row. A rule must have an active row
status in order to take effect. Only active rules
within the named policy are applied when an
application applies the policy. It is possible to
use this row status as an on/off switch for enabling
or disabling selected rules within a policy.
A newly created rule will remain in notReady state
until it is given a valid rule string (see
hpicfGppcPrPolicyRule).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.41.4.1.3 |