HP-ICF-BFD-MIB
This MIB module contains HP proprietary extensions to the OSPF-MIB module.
Main OID:
hpicfBfd.1.3.6.1.4.1.25506.11.1.120
26
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
hpicfBfdSessTableHP extensions to the BfdSessTable (RFC 7331). SEQUENCE OF HpicfBfdSessEntry .1.3.6.1.2.1.999.1.6 |
hpicfBfdSessEntryHP extensions for an entry in the BfdSessTable. HpicfBfdSessEntry .1.3.6.1.2.1.999.1.6.1 |
hpicfBfdSessApplicationIDName of application above BFD session.rw Enumeration .1.3.6.1.2.1.999.1.6.1.1 |
hpicfBfdSessStausNature of application above BFD session.rw Enumeration .1.3.6.1.2.1.999.1.6.1.2 |
hpicfBfdSessClearStatsFlag to clear or not to clear statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.999.1.6.1.3 |
hpicfBfdThis MIB module contains HP proprietary
extensions to the OSPF-MIB module. MODULE-IDENTITY .1.3.6.1.4.1.25506.11.1.120 |
hpicfBfdObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.120.1 |
hpicfBfdSessConfigTableA table of BFD session parameters SEQUENCE OF HpicfBfdSessConfigEntry .1.3.6.1.4.1.25506.11.1.120.1.1 |
hpicfBfdSessConfigEntryA set of objects used to configure BFD session parameters . HpicfBfdSessConfigEntry .1.3.6.1.4.1.25506.11.1.120.1.1.1 |
hpicfBfdSessConfigIfIndexThe VLAN ifIndex value that uniquely
identifies a row in the hpicf bfd session Table
and corresponds to the VLAN on which the BFD
session exist. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.11.1.120.1.1.1.1 |
hpicfBfdSessConfigDesiredMinTxIntervalThis object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved in this case, and should not be
used.rw BfdIntervalTC (BFD-TC-STD-MIB) .1.3.6.1.4.1.25506.11.1.120.1.1.1.2 |
hpicfBfdSessConfigReqMinRxIntervalThis object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not want the remote system to send any periodic BFD
control packets.rw BfdIntervalTC (BFD-TC-STD-MIB) .1.3.6.1.4.1.25506.11.1.120.1.1.1.3 |
hpicfBfdSessConfigReqMinEchoRxIntervalThis object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multihop BFD session.rw BfdIntervalTC (BFD-TC-STD-MIB) .1.3.6.1.4.1.25506.11.1.120.1.1.1.4 |
hpicfBfdSessConfigDetectMultThis object specifies the Detect time multiplier.rw BfdMultiplierTC (BFD-TC-STD-MIB) .1.3.6.1.4.1.25506.11.1.120.1.1.1.5 |
hpicfBfdSessConfigAuthPresFlagThis object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2) if not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.120.1.1.1.6 |
hpicfBfdSessConfigAuthenticationTypeThe Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication related objects are set to
read-create in order to support management of a single
key ID at a time, key rotation is not handled. Key update
in practice must be done by atomic update using a set
containing all affected objects in the same varBindList
or otherwise risk the session dropping.rw IANAbfdSessAuthenticationTypeTC (IANA-BFD-TC-STD-MIB) .1.3.6.1.4.1.25506.11.1.120.1.1.1.7 |
hpicfBfdSessConfigAuthenticationKeyIDThe authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
The value -1 indicates that no Authentication Key ID will
be present in the optional BFD Authentication Section.rw Integer32 (-1 | 0..255) .1.3.6.1.4.1.25506.11.1.120.1.1.1.8 |
hpicfBfdSessConfigAuthenticationKeyThe authentication key. When the
hpicfBfdSessConfigAuthenticationType is simplePassword(1) and when the
encryption is enabled on the switch, the value of this object is the
encrypted password present in the BFD packets.
When the hpicfBfdSessConfigAuthenticationType is one of the keyed
authentication types, this value is used in the
computation of the key present in the BFD authentication
packet.rw IANAbfdSessAuthenticationKeyTC (IANA-BFD-TC-STD-MIB) .1.3.6.1.4.1.25506.11.1.120.1.1.1.9 |
hpicfBfdSessConfigAuthEncPwdThe authentication key. When the
bfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.
When the bfdSessAuthenticationType is one of the keyed
authentication types, this value is used in the
computation of the key present in the BFD authentication
packet.rw IANAbfdSessAuthenticationKeyTC (IANA-BFD-TC-STD-MIB) .1.3.6.1.4.1.25506.11.1.120.1.1.1.10 |
hpicfBfdSessConfigRowStatusThe status of this BFD session config entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.120.1.1.1.11 |
hpicfBfdScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.120.1.2 |
hpicfBfdEchoSrcIpAddTypeThe type of IP address used as source address for BFD echo packetrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.120.1.2.1 |
hpicfBfdEchoSrcIpAddThe IP address which is used as source address for BFD echo packetrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.120.1.2.2 |
hpicfBfdConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.120.2 |
hpicfBfdGroups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.120.2.1 |
hpicfBfdCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.120.2.2 |