HH3C-WLAN-FLEXAPP-CFG-MIB
AI MIB Summary
The HH3C-WLAN-FLEXAPP-CFG-MIB module enables the remote monitoring and configuration of application-specific parameters and operational settings within H3C WLAN controller environments. It facilitates the retrieval and modification of flexible application profiles, including service policies, traffic handling rules, and user access configurations required for dynamic wireless network management.
This MIB provides information about WLAN application configuration.
Main OID:
hh3cWlanFlexAppCFG.1.3.6.1.4.1.25506.2.75.19
132
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
132 total| Object Name |
|---|
hh3cWlanFlexAppCFGThis MIB provides information about WLAN application configuration. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.75.19 |
hh3cWlanModuleConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.1 |
hh3cWlanModuleConfigTableAdministrators must configure module parameters for a module to operate. SEQUENCE OF Hh3cWlanModuleConfigEntry .1.3.6.1.4.1.25506.2.75.19.1.1 |
hh3cWlanModuleConfigEntryEach entry contains module configuration information. Hh3cWlanModuleConfigEntry .1.3.6.1.4.1.25506.2.75.19.1.1.1 |
hh3cWlanAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.1.1.1.1 |
hh3cWlanModuleIDThis object represents the module ID of a module. Integer32 .1.3.6.1.4.1.25506.2.75.19.1.1.1.2 |
hh3cWlanModuleTypeThis object represents the type of a module.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.1.1.1.3 |
hh3cWlanModuleStatusThis object represents the enabled or disabled status of a module.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.1.1.1.4 |
hh3cWlanModuleResetWhen read the value from the node none: Represents the module has been rebooted and the status of the module is normal. When write the value to the node reboot: Represents module rebooting. Other values are not supported.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.1.1.1.5 |
hh3cWlanModuleRstFacWhen read the value from the node none: Represents the module has been restored and the status of the module is normal. When write the value to the node restore: Represents module restoring. Other values are not supported.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.1.1.1.6 |
hh3cWlanModuleUpWareStatusThis object represents the enabled or disabled status of module auto update.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.1.1.1.7 |
hh3cWlanModuleTxPowerThis object represents the packet transmit power.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.1.1.1.8 |
hh3cWlanModuleManualUpdateThis object represents the file path for module firmware updating.rw OCTET STRING .1.3.6.1.4.1.25506.2.75.19.1.1.1.9 |
hh3cWlanModuleInfoTableThe table contains information about each module of an AP. SEQUENCE OF Hh3cWlanModuleInfoEntry .1.3.6.1.4.1.25506.2.75.19.1.2 |
hh3cWlanModuleInfoEntryEach entry contains IOT module information. Hh3cWlanModuleInfoEntry .1.3.6.1.4.1.25506.2.75.19.1.2.1 |
hh3cDot11IOTAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.1.2.1.1 |
hh3cDot11IOTModuleIDThis object represents a module. Integer32 .1.3.6.1.4.1.25506.2.75.19.1.2.1.2 |
hh3cDot11IOTModuleTypeThis object represents the type of a module.ro Enumeration .1.3.6.1.4.1.25506.2.75.19.1.2.1.3 |
hh3cDot11IOTModuleModelThis object represents the model of a module.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.19.1.2.1.4 |
hh3cDot11IOTModuleHwVersionThis object represents the hardware version of a module.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.19.1.2.1.5 |
hh3cDot11IOTModuleSwVersionThis object represents the software version of a module.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.19.1.2.1.6 |
hh3cDot11IOTModuleSerialIdThis object represents the sequence ID of a module.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.19.1.2.1.7 |
hh3cWlanIOTConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.2 |
hh3cWlanIOTConfigTableAdministrators must configure IOT parameters. SEQUENCE OF Hh3cWlanIOTConfigEntry .1.3.6.1.4.1.25506.2.75.19.2.1 |
hh3cWlanIOTConfigEntryEach entry contains module configuration information. Hh3cWlanIOTConfigEntry .1.3.6.1.4.1.25506.2.75.19.2.1.1 |
hh3cWlanIOTAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.2.1.1.1 |
hh3cWlanIOTEngineAddThis object represents the IPv4 address of the location server.rw IpAddress .1.3.6.1.4.1.25506.2.75.19.2.1.1.2 |
hh3cWlanIOTEnginePortThis object represents the UDP port to listen for IOT messages from the server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.2.1.1.3 |
hh3cWlanModuleNotifyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.3 |
hh3cWlanModuleTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.3.0 |
hh3cWlanModuleInsertTrapThis notification will be generated when an IOT module is inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.19.3.0.1 |
hh3cWlanModuleRomveTrapThis notification will be generated when an IOT module is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.19.3.0.2 |
hh3cWlanModuleMissMatchThis notification will be generated when the configured type doesn't match the module type. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.19.3.0.3 |
hh3cWlanModuleTrapVarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.3.1 |
hh3cWlanTrapAPMacAddressThis object represents the MAC address of an AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.3.1.1 |
hh3cWlanTrapModuleIDThis object represents the ID of a module.ro Integer32 .1.3.6.1.4.1.25506.2.75.19.3.1.2 |
hh3cWlanTrapModuleCfgTypeThis object represents the configuration type of a module.ro Enumeration .1.3.6.1.4.1.25506.2.75.19.3.1.3 |
hh3cWlanTrapModulePhyTypeThis object represents the physical type of a module.ro Enumeration .1.3.6.1.4.1.25506.2.75.19.3.1.4 |
hh3cWlanTrapModuleModelThis object represents the model of a module.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.19.3.1.5 |
hh3cWlanTrapModuleHwVersionThis object represents the hardware version of a module.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.19.3.1.6 |
hh3cWlanTrapModuleSwVersionThis object represents the software version of a module.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.19.3.1.7 |
hh3cWlanTrapModuleSequenceIdThis object represents the sequence ID of a module.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.19.3.1.8 |
hh3cWlanBLEConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.4 |
hh3cWlanBLEConfigTableAdministrators must configure Bluetooth Low Energy (BLE) parameters. SEQUENCE OF Hh3cWlanBLEConfigEntry .1.3.6.1.4.1.25506.2.75.19.4.1 |
hh3cWlanBLEConfigEntryEach entry contains BLE location configuration information. Hh3cWlanBLEConfigEntry .1.3.6.1.4.1.25506.2.75.19.4.1.1 |
hh3cWlanBLEAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.4.1.1.1 |
hh3cWlanBLEStatusThis object represents the enabled or disabled status of BLE location.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.4.1.1.2 |
hh3cWlanBLEEngineAddThis object represents the server's IPv4 address to which BLE messages are sent.rw IpAddress .1.3.6.1.4.1.25506.2.75.19.4.1.1.3 |
hh3cWlanBLEEnginePortThis object represents the UDP port of the location server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.4.1.1.4 |
hh3cWlanBLEVendorPortThis object represents the UDP port to listen for BLE messages from the server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.4.1.1.5 |
hh3cWlanBLERssiStatusThis object represents the enabled or disabled status of BLE RSSI-based packet filtering.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.4.1.1.6 |
hh3cWlanBLERssiThresholdThis object represents the max RSSI value of clients' packets.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.4.1.1.7 |
hh3cWlanBLEConnectPasswordThis object represents the BLE module connection password.rw OCTET STRING .1.3.6.1.4.1.25506.2.75.19.4.1.1.8 |
hh3cWlanBLECommandPasswordThis object represents the BLE module command password.rw OCTET STRING .1.3.6.1.4.1.25506.2.75.19.4.1.1.9 |
hh3cWlanBLEReportStatusThis object represents the enabled or disabled status of BLE location reporting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.4.1.1.10 |
hh3cWlanBLEReportIntervalThis object represents the interval at which an AP sends BLE messages to the server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.4.1.1.11 |
hh3cWlanBLEAgingTimeThis object represents the aging time for iBeacon devices.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.4.1.1.12 |
hh3cWlanBLERealTimeReportStatusThis object represents the enabled or disabled status of BLE realtime reporting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.4.1.1.13 |
hh3cWlanBLERealTimePrefixThis object represents the manufacturer prefix of BLE devices to be located. The prefix must be an even number.rw OCTET STRING .1.3.6.1.4.1.25506.2.75.19.4.1.1.14 |
hh3cWlanBLEModuleConfigTableAdministrators must configure BLE module parameters. SEQUENCE OF Hh3cWlanBLEModuleConfigEntry .1.3.6.1.4.1.25506.2.75.19.4.2 |
hh3cWlanBLEModuleConfigEntryEach entry contains BLE module configuration information. Hh3cWlanBLEModuleConfigEntry .1.3.6.1.4.1.25506.2.75.19.4.2.1 |
hh3cWlanBLEModuleAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.4.2.1.1 |
hh3cWlanBLEModuleIDThis object represents the ID of a module. Integer32 .1.3.6.1.4.1.25506.2.75.19.4.2.1.2 |
hh3cWlanBLEAdvReportStatusThis object represents the enabled or disabled status of BLE advertisement reporting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.4.2.1.3 |
hh3cWlanBLEAdvReportIntervalThis object represents the interval at which a BLE module sends advertisement packets.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.4.2.1.4 |
hh3cWlanBLEAdvUUIDThis object represents the UUID of BLE advertisement packets.rw OCTET STRING .1.3.6.1.4.1.25506.2.75.19.4.2.1.5 |
hh3cWlanBLEAdvMajorIDThis object represents the major ID of BLE advertisement packets.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.4.2.1.6 |
hh3cWlanBLEAdvMinorIDThis object represents the minor ID of BLE advertisement packets.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.4.2.1.7 |
hh3cWlanAEConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.5 |
hh3cWlanAEConfigTableAdministrators must configure AeroScout (AE) parameters. SEQUENCE OF Hh3cWlanAEConfigEntry .1.3.6.1.4.1.25506.2.75.19.5.1 |
hh3cWlanAEConfigEntryEach entry contains AE location configuration information. Hh3cWlanAEConfigEntry .1.3.6.1.4.1.25506.2.75.19.5.1.1 |
hh3cWlanAEAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.5.1.1.1 |
hh3cWlanAEStatusThis object represents the enabled or disabled status of AE location.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.5.1.1.2 |
hh3cWlanAEEngineAddrThis object represents the server's IPv4 address to which AE messages are sent.rw IpAddress .1.3.6.1.4.1.25506.2.75.19.5.1.1.3 |
hh3cWlanAEEnginePortThis object represents the UDP port of the location server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.5.1.1.4 |
hh3cWlanAEVendorPortThis object represents the UDP port to listen for AE messages from the server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.5.1.1.5 |
hh3cWlanAETimeStampThis object represents the enabled or disabled status of timestamp.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.5.1.1.6 |
hh3cWlanAEVersionThis object represents the version of the AE protocol.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.5.1.1.7 |
hh3cWlanAETagMultiAddrThis object represents Tag's multicast MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.5.1.1.8 |
hh3cWlanAEEngineDetectionThis object represents the location mode.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.5.1.1.9 |
hh3cWlanAEReportModeThis object represents the report mode.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.5.1.1.10 |
hh3cWlanAERadioConfigTableAdministrators must configure AE parameters. SEQUENCE OF Hh3cWlanAERadioConfigEntry .1.3.6.1.4.1.25506.2.75.19.5.2 |
hh3cWlanAERadioConfigEntryEach entry contains AE location configuration information. Hh3cWlanAERadioConfigEntry .1.3.6.1.4.1.25506.2.75.19.5.2.1 |
hh3cWlanAERadioAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.5.2.1.1 |
hh3cWlanAEAPRadioIDThis object represents the ID of a radio. Integer32 .1.3.6.1.4.1.25506.2.75.19.5.2.1.2 |
hh3cWlanAERadioStatusThis object represents the enabled or disabled status of radio-based location.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.5.2.1.3 |
hh3cWlanAEMUStatusThis object represents the status of MU message reporting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.5.2.1.4 |
hh3cWlanAETagStatusThis object represents the status of Tag message reporting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.5.2.1.5 |
hh3cWlanCommonConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.6 |
hh3cWlanCommonConfigTableAdministrators must configure common parameters. SEQUENCE OF Hh3cWlanCommonConfigEntry .1.3.6.1.4.1.25506.2.75.19.6.1 |
hh3cWlanCommonConfigEntryEach entry contains common configuration information. Hh3cWlanCommonConfigEntry .1.3.6.1.4.1.25506.2.75.19.6.1.1 |
hh3cWlanCommonAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.6.1.1.1 |
hh3cWlanDilutionStatusThis object represents the enabled or disabled status of packet dilution.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.6.1.1.2 |
hh3cWlanDilutionFactorThis object represents the packet dilution factor.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.6.1.1.3 |
hh3cWlanDilutionTimeoutThis object represents the packet dilution timeout.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.6.1.1.4 |
hh3cWlanIgnoreBeaconThis object represents the enabled or disabled status of beacon ignoring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.6.1.1.5 |
hh3cWlanRateLimitStatusThis object represents the enabled or disabled status of location packet rate limiting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.6.1.1.6 |
hh3cWlanRateLimitCirThis object represents the CIR for sending location packets.rw Integer32(0|8..1300000) UNITS "Kbps" .1.3.6.1.4.1.25506.2.75.19.6.1.1.7 |
hh3cWlanRateLimitCbsThis object represents the CBS for sending location packets.rw Integer32(0|500..130000000) UNITS "Bytes" .1.3.6.1.4.1.25506.2.75.19.6.1.1.8 |
hh3cWlanClientRateLimitStatusThis object represents the enabled or disabled status of client packet rate limiting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.6.1.1.9 |
hh3cWlanClientRateLimitCirThis object represents the CIR for receiving client packets.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.6.1.1.10 |
hh3cWlanClientRateLimitCbsThis object represents the CBS for receiving client packets.rw Integer32(0|80..130000000) UNITS "Bytes" .1.3.6.1.4.1.25506.2.75.19.6.1.1.11 |
hh3cWlanRssiStatusThis object represents the enabled or disabled status of RSSI-based packet filtering.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.6.1.1.12 |
hh3cWlanRssiThresholdThis object represents the max RSSI value of clients' packets.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.6.1.1.13 |
hh3cWlanIgnoreApFrameThis object represents the enabled or disabled status of AP packet ignoring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.6.1.1.14 |
hh3cWlanCUPIDConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.7 |
hh3cWlanCUPIDConfigTableAdministrators must configure CUPID parameters. SEQUENCE OF Hh3cWlanCUPIDConfigEntry .1.3.6.1.4.1.25506.2.75.19.7.1 |
hh3cWlanCUPIDConfigEntryEach entry contains CUPID location configuration information. Hh3cWlanCUPIDConfigEntry .1.3.6.1.4.1.25506.2.75.19.7.1.1 |
hh3cWlanCupidAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.7.1.1.1 |
hh3cWlanCupidStatusThis object represents the status of CUPID location.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.7.1.1.2 |
hh3cWlanCupidEngineAddrThis object represents the IPv4 address of the CUPID location server.rw IpAddress .1.3.6.1.4.1.25506.2.75.19.7.1.1.3 |
hh3cWlanCupidEnginePortThis object represents the UDP port of the CUPID location server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.7.1.1.4 |
hh3cWlanCupidVendorPortThis object represents the UDP port to listen for CUPID messages from the server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.7.1.1.5 |
hh3cWlanCupidReportStatusThis object represents the status of CUPID location reporting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.7.1.1.6 |
hh3cWlanCupidReportIntervalThis object represents the interval for sending CUPID location packets.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.7.1.1.7 |
hh3cWlanCupidUnassStaThis object represents the status of unassociated client information reporting for CUPID location.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.7.1.1.8 |
hh3cWlanCupidUnassMeasureStaThis object represents the status of CUPID location for unassociated clients.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.7.1.1.9 |
hh3cWlanCupidReportModeThis object represents the report mode.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.7.1.1.10 |
hh3cWlanCUPIDReportFormatThis object represents the report format.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.7.1.1.11 |
hh3cWlanFPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.19.8 |
hh3cWlanFPConfigTableAdministrators must configure RF fingerprinting parameters. SEQUENCE OF Hh3cWlanFPConfigEntry .1.3.6.1.4.1.25506.2.75.19.8.1 |
hh3cWlanFPConfigEntryEach entry contains RF fingerprinting configuration information. Hh3cWlanFPConfigEntry .1.3.6.1.4.1.25506.2.75.19.8.1.1 |
hh3cWlanFPAPSerialIDThis object represents the serial ID of an AP. OCTET STRING .1.3.6.1.4.1.25506.2.75.19.8.1.1.1 |
hh3cWlanFPStatusThis object represents the enabled or disabled status of RF fingerprinting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.8.1.1.2 |
hh3cWlanFPEngineAddrThis object represents the IPv4 address of the RF fingerprinting server.rw IpAddress .1.3.6.1.4.1.25506.2.75.19.8.1.1.3 |
hh3cWlanFPEnginePortThis object represents the UDP port of the RF fingerprinting server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.8.1.1.4 |
hh3cWlanFPVendorPortThis object represents the UDP port to listen for RF fingerprinting packets from the server.rw Integer32 .1.3.6.1.4.1.25506.2.75.19.8.1.1.5 |
hh3cWlanFPRawFrameReportThis object represents the status of raw frame reporting for RF fingerprinting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.8.1.1.6 |
hh3cWlanFPMUReportThis object represents the status of MU information reporting for RF fingerprinting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.8.1.1.7 |
hh3cWlanFPReportModeThis object represents the report mode.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.8.1.1.8 |
hh3cWlanFPReportFormatThis object represents the report format.rw Enumeration .1.3.6.1.4.1.25506.2.75.19.8.1.1.9 |
hh3cWlanFPTagMultiAddrThis object represents Tag's multicast MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.19.8.1.1.10 |