HH3C-USERLOG-MIB
The HH3C-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature.
Main OID:
hh3cUserLogMIB.1.3.6.1.4.1.25506.8.18
70
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
hh3cUserLogMIBThe HH3C-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature. MODULE-IDENTITY .1.3.6.1.4.1.25506.8.18 |
hh3cUserlogObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.18.1 |
hh3cUserlogNatObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.18.1.1 |
hh3cUserlogNatVersionNAT LOG version. Currently only version 1 is developed.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.1.1 |
hh3cUserlogNatSyslogNAT LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.1.2 |
hh3cUserlogNatSourceIPThe Source IP address of NAT LOG UDP packet.rw IpAddress .1.3.6.1.4.1.25506.8.18.1.1.3 |
hh3cUserlogNatFlowBeginLog the NAT flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.1.4 |
hh3cUserlogNatActiveTimeThe active time for long-time existed NAT flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, NAT flow can be logged after an interval of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.1.5 |
hh3cUserlogNatSlotCfgInfoTableA table of NAT LOG configuration information for the specified slot. SEQUENCE OF Hh3cUserlogNatSlotCfgInfoEntry .1.3.6.1.4.1.25506.8.18.1.1.6 |
hh3cUserlogNatSlotCfgInfoEntryNAT LOG Configuration Information Entry for a slot. Hh3cUserlogNatSlotCfgInfoEntry .1.3.6.1.4.1.25506.8.18.1.1.6.1 |
hh3cUserlogNatCfgSlotNumberSlot number. Specify which slot is configured with NAT LOG.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.1.6.1.1 |
hh3cUserlogNatEnableThe NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.1.6.1.2 |
hh3cUserlogNatAclNumberAccess-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logged.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.1.6.1.3 |
hh3cUserlogNatHostAddressThe IP address of NAT LOG server.rw IpAddress .1.3.6.1.4.1.25506.8.18.1.1.6.1.4 |
hh3cUserlogNatUdpPortThe UDP Port Number of NAT LOG UDP packet.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.1.6.1.5 |
hh3cUserlogNatSlotRunInfoTableA table of NAT LOG running information for the specified slot. SEQUENCE OF Hh3cUserlogNatSlotRunInfoEntry .1.3.6.1.4.1.25506.8.18.1.1.7 |
hh3cUserlogNatSlotRunInfoEntryNAT LOG Running Information Entry for a slot. Hh3cUserlogNatSlotRunInfoEntry .1.3.6.1.4.1.25506.8.18.1.1.7.1 |
hh3cUserlogNatRunSlotNumberSlot number. Specify on which slot the NAT LOG statistics displayed.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.1.7.1.1 |
hh3cUserlogNatTotalEntriesThe total number of NAT flow entries which are logged.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.1.7.1.2 |
hh3cUserlogNatTotalPacketsThe total number of NAT LOG UDP packets generated by the router.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.1.7.1.3 |
hh3cUserlogNatFailedEntriesThe total number of NAT flow entries failed in outputting.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.1.7.1.4 |
hh3cUserlogNatFailedPacketsThe total number of NAT LOG UDP packets failed in outputting.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.1.7.1.5 |
hh3cUserlogNatClearRunStatClear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.1.7.1.6 |
hh3cUserlogFlowObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.18.1.2 |
hh3cUserlogFlowVersionBAS FLOW LOG version. Currently only version 1 is developed.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.2.1 |
hh3cUserlogFlowSyslogBAS FLOW LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.2.2 |
hh3cUserlogFlowSourceIPThe Source IP address of BAS FLOW LOG UDP packet.rw IpAddress .1.3.6.1.4.1.25506.8.18.1.2.3 |
hh3cUserlogFlowFlowBeginLog the BAS flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.2.4 |
hh3cUserlogFlowActiveTimeThe active time for long-time existed BAS flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, BAS flow can be logged after an internal of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.2.5 |
hh3cUserlogFlowSlotCfgInfoTableA table of BAS FLOW LOG configuration information for the specified slot. SEQUENCE OF Hh3cUserlogFlowSlotCfgInfoEntry .1.3.6.1.4.1.25506.8.18.1.2.6 |
hh3cUserlogFlowSlotCfgInfoEntryBAS FLOW LOG Configuration Information Entry for a slot. Hh3cUserlogFlowSlotCfgInfoEntry .1.3.6.1.4.1.25506.8.18.1.2.6.1 |
hh3cUserlogFlowCfgSlotNumberSlot number. Specify which slot is configured with BAS FLOW LOG.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.2.6.1.1 |
hh3cUserlogFlowEnableThe BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.2.6.1.2 |
hh3cUserlogFlowAclNumberAccess-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be logged.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.2.6.1.3 |
hh3cUserlogFlowHostAddressThe IP address of BAS FLOW LOG server.rw IpAddress .1.3.6.1.4.1.25506.8.18.1.2.6.1.4 |
hh3cUserlogFlowUdpPortThe UDP Port Number of BAS FLOW LOG UDP packet.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.2.6.1.5 |
hh3cUserlogFlowSlotRunInfoTableA table of BAS FLOW LOG running information for the specified slot. SEQUENCE OF Hh3cUserlogFlowSlotRunInfoEntry .1.3.6.1.4.1.25506.8.18.1.2.7 |
hh3cUserlogFlowSlotRunInfoEntryRunning Information Entry for a slot. Hh3cUserlogFlowSlotRunInfoEntry .1.3.6.1.4.1.25506.8.18.1.2.7.1 |
hh3cUserlogFlowRunSlotNumberSlot number. Specify on which slot the BAS FLOW LOG statistics displayed.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.2.7.1.1 |
hh3cUserlogFlowTotalEntriesThe total number of BAS FLOW Entries which are logged.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.2.7.1.2 |
hh3cUserlogFlowTotalPacketsThe total number of FLOW LOG UDP packet generated by the router.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.2.7.1.3 |
hh3cUserlogFlowFailedEntriesThe total number of BAS FLOW entries failed in outputting.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.2.7.1.4 |
hh3cUserlogFlowFailedPacketsThe total number of BAS FLOW LOG UDP packet failed in outputting.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.2.7.1.5 |
hh3cUserlogFlowClearRunStatClear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.2.7.1.6 |
hh3cUserlogAccessObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.18.1.3 |
hh3cUserlogAccessVersionBAS ACCESS LOG version. Currently only version 1 is developed.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.3.1 |
hh3cUserlogAccessSyslogBAS ACCESS LOG format. If 1, LOG format is sysLog; If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.3.2 |
hh3cUserlogAccessSourceIPThe Source IP address of BAS ACCESS LOG UDP packet.rw IpAddress .1.3.6.1.4.1.25506.8.18.1.3.3 |
hh3cUserlogAccessSlotCfgInfoTableA table of BAS ACCESS LOG configuration information for the specified slot. SEQUENCE OF Hh3cUserlogAccessSlotCfgInfoEntry .1.3.6.1.4.1.25506.8.18.1.3.4 |
hh3cUserlogAccessSlotCfgInfoEntryBAS ACCESS LOG Configuration Information Entry for a slot. Hh3cUserlogAccessSlotCfgInfoEntry .1.3.6.1.4.1.25506.8.18.1.3.4.1 |
hh3cUserlogAccessCfgSlotNumberSlot number. Specify which slot is configured with BAS ACCESS LOG.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.3.4.1.1 |
hh3cUserlogAccessEnableThe BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.3.4.1.2 |
hh3cUserlogAccessHostAddressThe IP address of BAS ACCESS LOG server.rw IpAddress .1.3.6.1.4.1.25506.8.18.1.3.4.1.3 |
hh3cUserlogAccessUdpPortThe UDP Port Number of BAS ACCESS LOG UDP packet.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.3.4.1.4 |
hh3cUserlogAccessSlotRunInfoTableA table of BAS ACCESS LOG running information for the specified slot. SEQUENCE OF Hh3cUserlogAccessSlotRunInfoEntry .1.3.6.1.4.1.25506.8.18.1.3.5 |
hh3cUserlogAccessSlotRunInfoEntryRunning Information Entry for a slot. Hh3cUserlogAccessSlotRunInfoEntry .1.3.6.1.4.1.25506.8.18.1.3.5.1 |
hh3cUserlogAccessRunSlotNumberSlot number. Specify on which slot the BAS ACCESS LOG statistics displayed.ro Integer32 .1.3.6.1.4.1.25506.8.18.1.3.5.1.1 |
hh3cUserlogAccessTotalEntriesThe total number of BAS ACCESS Records which are logged.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.3.5.1.2 |
hh3cUserlogAccessTotalPacketsThe total number of ACCESS LOG UDP packet generated by the router.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.3.5.1.3 |
hh3cUserlogAccessFailedEntriesThe total number of BAS ACCESS entries failed in outputting.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.3.5.1.4 |
hh3cUserlogAccessFailedPacketsThe total number of BAS ACCESS LOG UDP packet failed in outputting.ro Counter32 .1.3.6.1.4.1.25506.8.18.1.3.5.1.5 |
hh3cUserlogAccessClearRunStatClear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid.rw Integer32 .1.3.6.1.4.1.25506.8.18.1.3.5.1.6 |
hh3cUserlogNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.18.2 |
hh3cUserlogConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.18.3 |
hh3cUserlogCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.18.3.1 |
hh3cUserlogComplianceThe compliance statement for entities which implement the H3C Userlog mib. Unknown .1.3.6.1.4.1.25506.8.18.3.1.1 |
hh3cUserlogGroups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.18.3.2 |
hh3cUserlogMandatoryGroupA collection of objects providing mandatory Userlog information. Unknown .1.3.6.1.4.1.25506.8.18.3.2.1 |
hh3cUserlogConfigGroupAll configurable parameters of Userlog feature. Unknown .1.3.6.1.4.1.25506.8.18.3.2.2 |
hh3cUserlogInfoGroupAll running information of Userlog feature. Unknown .1.3.6.1.4.1.25506.8.18.3.2.3 |