HH3C-UPS-MIB
Imported Objects
Objects
9 total| Object Name |
|---|
hh3cUpsThis MIB describes the general information of UPS(Uninterrupted Power Supply) device. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.82 |
hh3cUpsMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.82.1 |
hh3cUpsConfigEnableThis object identifies the operation which will make the UPS(Uninterrupted Power Supply)'s new configure become effective.rw Hh3cActionType .1.3.6.1.4.1.25506.2.82.1.1 |
hh3cUpsConfigTableThis table contains an entry for user to get some information about the UPS device. SEQUENCE OF Hh3cUpsConfigEntry .1.3.6.1.4.1.25506.2.82.1.2 |
hh3cUpsConfigEntryAn entry containing management information applicable to a particular UPS. Hh3cUpsConfigEntry .1.3.6.1.4.1.25506.2.82.1.2.1 |
hh3cUpsIndexThis object identifies the index of hh3cUpsConfigTable. The object identified by this index is the same object as identified by the same value of entPhysicalIndex. Integer32 .1.3.6.1.4.1.25506.2.82.1.2.1.1 |
hh3cUpsTypeThis object identifies the type of UPS. The value 'emersonUart' means an EMERSON UPS support UART interface. The value 'mge' means a MGE UPS support ethernet interface. The value 'common' means a common UPS support standard UPSMIB. The value 'emersonEth' means an EMERSON UPS support ethernet interface. The value 'liebert' means a Liebert UPS support ethernet interface.ro Enumeration .1.3.6.1.4.1.25506.2.82.1.2.1.2 |
hh3cUpsIpAddressThis object describes the address of UPS. The value of this object is invalid if the UPS do not support ethernet interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.82.1.2.1.3 |
hh3cUpsIpAddressTypeThis object describes the address type of UPS. The value of this object is invalid if the UPS do not support ethernet interface.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.82.1.2.1.4 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →SNMP MIB module
SNMP MIB module
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
SNMP MIB module