HH3C-TRANSCEIVER-INFO-MIB
AI MIB Summary
The HH3C-TRANSCEIVER-INFO-MIB module enables monitoring of optical transceiver parameters, including SFP module status, optical power levels, temperature, and voltage, on H3C network interface cards. This data facilitates the detection of hardware degradation and link failures by exposing physical layer telemetry directly from the device's management information base.
The objects in this MIB module are used to display the information of transceiver on interface.
Main OID:
hh3cTransceiver.1.3.6.1.4.1.25506.2.70
51
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
hh3cTransceiverThe objects in this MIB module are used to display the information of transceiver on interface. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.70 |
hh3cTransceiverInfoAdm OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.70.1 |
hh3cTransceiverInfoTableThis table shows transceiver information on an interface. SEQUENCE OF Hh3cTransceiverInfoEntry .1.3.6.1.4.1.25506.2.70.1.1 |
hh3cTransceiverInfoEntryThe entry of the hh3cTransceiverInfoTable. Hh3cTransceiverInfoEntry .1.3.6.1.4.1.25506.2.70.1.1.1 |
hh3cTransceiverHardwareTypeHardware type of the interface, such as SM(single mode).ro OCTET STRING .1.3.6.1.4.1.25506.2.70.1.1.1.1 |
hh3cTransceiverTypeType of the interface, such as SFP/XFP/GBIC.ro OCTET STRING .1.3.6.1.4.1.25506.2.70.1.1.1.2 |
hh3cTransceiverWaveLengthWave length of the interface, measured in nanometer.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.3 |
hh3cTransceiverVendorNameVendor name of the interface.ro OCTET STRING .1.3.6.1.4.1.25506.2.70.1.1.1.4 |
hh3cTransceiverSerialNumberSerial number of the interface.ro OCTET STRING .1.3.6.1.4.1.25506.2.70.1.1.1.5 |
hh3cTransceiverFiberDiameterTypeThe diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.ro Enumeration .1.3.6.1.4.1.25506.2.70.1.1.1.6 |
hh3cTransceiverTransferDistanceThe maximum distance which the interface can transmit, measured in meter.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.7 |
hh3cTransceiverDiagnosticIndicating the digital diagnostic monitoring function.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.70.1.1.1.8 |
hh3cTransceiverCurTXPowerIndicating the current transmitted power. The unit is in hundredths of dBM.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.9 |
hh3cTransceiverMaxTXPowerIndicating the maximum transmitted power. The unit is in hundredths of dBM.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.10 |
hh3cTransceiverMinTXPowerIndicating the minimum transmitted power. The unit is in hundredths of dBM.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.11 |
hh3cTransceiverCurRXPowerIndicating the current received power. The unit is in hundredths of dBM.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.12 |
hh3cTransceiverMaxRXPowerIndicating the maximum received power. The unit is in hundredths of dBM.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.13 |
hh3cTransceiverMinRXPowerIndicating the minimum received power. The unit is in hundredths of dBM.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.14 |
hh3cTransceiverTemperatureIndicating the current temperature. The unit is Celsius centigrade.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.15 |
hh3cTransceiverVoltageIndicating the current voltage. The unit is in hundredths of Vro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.16 |
hh3cTransceiverBiasCurrentIndicating the current bias electric current. The unit is in hundredths of mAro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.17 |
hh3cTransceiverTempHiAlarmTransceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.18 |
hh3cTransceiverTempLoAlarmTransceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.19 |
hh3cTransceiverTempHiWarnTransceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.20 |
hh3cTransceiverTempLoWarnTransceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.21 |
hh3cTransceiverVccHiAlarmTransceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.22 |
hh3cTransceiverVccLoAlarmTransceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.23 |
hh3cTransceiverVccHiWarnTransceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.24 |
hh3cTransceiverVccLoWarnTransceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.25 |
hh3cTransceiverBiasHiAlarmTransceiver bias high alarm threshold limit in microamps.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.26 |
hh3cTransceiverBiasLoAlarmTransceiver bias low alarm threshold limit in microamps.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.27 |
hh3cTransceiverBiasHiWarnTransceiver bias high warning threshold limit in microamps.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.28 |
hh3cTransceiverBiasLoWarnTransceiver bias low warning threshold limit in microamps.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.29 |
hh3cTransceiverPwrOutHiAlarmTransceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.30 |
hh3cTransceiverPwrOutLoAlarmTransceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.31 |
hh3cTransceiverPwrOutHiWarnTransceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.32 |
hh3cTransceiverPwrOutLoWarnTransceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.33 |
hh3cTransceiverRcvPwrHiAlarmTransceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.34 |
hh3cTransceiverRcvPwrLoAlarmTransceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.35 |
hh3cTransceiverRcvPwrHiWarnTransceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.36 |
hh3cTransceiverRcvPwrLoWarnTransceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.1.1.37 |
hh3cTransceiverErrorsBitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31)ro Bits .1.3.6.1.4.1.25506.2.70.1.1.1.38 |
hh3cTransceiverVendorOUIVendor OUI of the interface.ro OCTET STRING .1.3.6.1.4.1.25506.2.70.1.1.1.39 |
hh3cTransceiverRevisionNumberRevision number of the interface.ro OCTET STRING .1.3.6.1.4.1.25506.2.70.1.1.1.40 |
hh3cTransceiverChannelTableThis table provides statistics about transceiver with multi-channel. SEQUENCE OF Hh3cTransceiverChannelEntry .1.3.6.1.4.1.25506.2.70.1.2 |
hh3cTransceiverChannelEntryThe entry of the hh3cTransceiverChannelTable. Hh3cTransceiverChannelEntry .1.3.6.1.4.1.25506.2.70.1.2.1 |
hh3cTransceiverChannelIndexThe channel index of transceiver. Indicating one channel of the interface. Integer32 .1.3.6.1.4.1.25506.2.70.1.2.1.1 |
hh3cTransceiverChannelCurTXPowerIndicating the current transmission power. The unit is in hundredths of dBM.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.2.1.2 |
hh3cTransceiverChannelCurRXPowerIndicating the current received power. The unit is in hundredths of dBM.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.2.1.3 |
hh3cTransceiverChannelTemperatureIndicating the current temperature. The unit is Celsius centigrade.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.2.1.4 |
hh3cTransceiverChannelBiasCurrentIndicating the current bias electric current. The unit is in hundredths of mA.ro Integer32 .1.3.6.1.4.1.25506.2.70.1.2.1.5 |