HH3C-STORAGE-SNAP-MIB
AI MIB Summary
The HH3C-STORAGE-SNAP-MIB monitors snapshot management operations and status metrics for H3C storage devices via SNMP. It provides visibility into snapshot creation, deletion, consistency, and capacity utilization to facilitate storage lifecycle management.
This MIB describes the general information about snap of storage device.
Main OID:
hh3cStorageSnap.1.3.6.1.4.1.25506.10.2
157
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
157 total| Object Name |
|---|
hh3cStorageSnapThis MIB describes the general information about snap of storage device. MODULE-IDENTITY .1.3.6.1.4.1.25506.10.2 |
hh3cSnapMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.2.1 |
hh3cGlobalSnapSettingsObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.2.1.1 |
hh3cAddtionalSpaceMaxSizeThis object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource .ro Integer32 UNITS "TB" .1.3.6.1.4.1.25506.10.2.1.1.1 |
hh3cSnapConfigTableThis table contains some entity to config the snapshot resources for special logic volumes. SEQUENCE OF Hh3cSnapConfigEntry .1.3.6.1.4.1.25506.10.2.1.2 |
hh3cSnapConfigEntryAn entry containing configuration about the snapshot resource. Hh3cSnapConfigEntry .1.3.6.1.4.1.25506.10.2.1.2.1 |
hh3cSnapLvIndexThis object identifies the index of hh3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of hh3cLvIndex. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.2.1.1 |
hh3cSnapAreaIdThis object identifies the snapshot resource of the logic volume.ro Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.2.1.2 |
hh3cSnapAreaAutoExpandThis object describes if the space of snapshot resource can be expanded automatically.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.2.1.3 |
hh3cSnapAreaThresholdIf hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaThreshold' means the threshold of the snapshot resource.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.2.1.4 |
hh3cSnapAreaIncSizeIf hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the amount of space to be allocated for each expansion.rw Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.2.1.5 |
hh3cSnapAreaMaxSizeIf hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the max size of snapshot resource.rw Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.2.1.6 |
hh3cSnapAreaFullDeleteTMThis object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.2.1.7 |
hh3cSnapAreaNotifyThis object describes if a snapshot notification should be send to the client when the system create a timemark.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.2.1.8 |
hh3cSnapAreaStatusThis object describes the state of the snapshot resource.ro Hh3cStorageOnlineState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.2.1.9 |
hh3cSnapRaidUuidThis object describes the raid where the snapshot resource is created.rw Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.2.1.10 |
hh3cSnapRaidSizeThis object describes the size designated when the snapshot resource is created.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.2.1.11 |
hh3cSnapRaidSelectPolicyThis object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated hh3cSnapRaidUuid object is equal to null.rw Hh3cExtendSelectPolicy (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.2.1.12 |
hh3cSnapAreaTotalSizeThis object identifies the current total size of the snapshot resource.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.2.1.13 |
hh3cSnapAreaFreeSizeThis object identifies the free size of the snapshot resource.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.2.1.14 |
hh3cSnapExtendTimesThis object identifies the times the snapshot resource extended.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.2.1.15 |
hh3cSnapRowStatusThis object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.2.1.16 |
hh3cSnapExpandTableThis table contains some entity to expand a snapshot resource. SEQUENCE OF Hh3cSnapExpandEntry .1.3.6.1.4.1.25506.10.2.1.3 |
hh3cSnapExpandEntryAn entry containing expand information applicable to the snapshot resource. Hh3cSnapExpandEntry .1.3.6.1.4.1.25506.10.2.1.3.1 |
hh3cSAExpRaidUuidThis index is identical to hh3cRaidUuid in HH3C-RAID-MIB. Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.3.1.1 |
hh3cSAExpSizeThis object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read.rw Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.3.1.2 |
hh3cSAExpRaidSizeThis object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.3.1.3 |
hh3cSnapAreaExpRowStatusThis object describes the actions to expand the size for snap.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.3.1.4 |
hh3cSnapCopyTableThis table contains some entity about snapshot copy. SEQUENCE OF Hh3cSnapCopyEntry .1.3.6.1.4.1.25506.10.2.1.4 |
hh3cSnapCopyEntryAn entry containing snapshot copy information applicable. Hh3cSnapCopyEntry .1.3.6.1.4.1.25506.10.2.1.4.1 |
hh3cSnapCopyLvIndexThis object identifies the index of destination logic volume for snapshot copy.rw Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.4.1.1 |
hh3cSnapCopyPercentageThis object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.4.1.2 |
hh3cSnapCopyStartTimeThis object identifies the time to start the snapshot copy.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.4.1.3 |
hh3cSnapCopySwitchThis object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.4.1.4 |
hh3cTimeMarkConfigTableThis table contains some entity to config a TimeMark on a special logic volume. SEQUENCE OF Hh3cTimeMarkConfigEntry .1.3.6.1.4.1.25506.10.2.1.5 |
hh3cTimeMarkConfigEntryAn entry containing config information applicable to the TimeMark. Hh3cTimeMarkConfigEntry .1.3.6.1.4.1.25506.10.2.1.5.1 |
hh3cTimeMarkCountsThis object identifies the max num of TimeMark which can be configed.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.5.1.1 |
hh3cTimeMarkInitializeTimeThis object identifies the date and time when the first TimeMark is created on the logic volume.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.5.1.2 |
hh3cTimeMarkIntervalThis object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.5.1.3 |
hh3cTimeMarkLastTimeThis object identifies the date and time when the latest TimeMark is created on the logic volume.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.5.1.4 |
hh3cTimeMarkTotalThis object identifies the current num of TimeMark.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.5.1.5 |
hh3cTimeMarkSwitchThis object describes enable or disable TimeMark.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.5.1.6 |
hh3cTimeMarkCreateTableThis table contains some entity to create a TimeMark on a special logic volume. SEQUENCE OF Hh3cTimeMarkCreateEntry .1.3.6.1.4.1.25506.10.2.1.6 |
hh3cTimeMarkCreateEntryAn entry containing create information applicable to the TimeMark. Hh3cTimeMarkCreateEntry .1.3.6.1.4.1.25506.10.2.1.6.1 |
hh3cTimeMarkStampThis object identifies the date and time the TimeMark is created. DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.6.1.1 |
hh3cTimeMarkCommentThis object identifies the comment of the TimeMark.ro OCTET STRING .1.3.6.1.4.1.25506.10.2.1.6.1.2 |
hh3cTimeMarkSizeThis object identifies the current size of the TimeMark.ro Integer32 UNITS "KB" .1.3.6.1.4.1.25506.10.2.1.6.1.3 |
hh3cTimeMarkRowStatusThis object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.6.1.4 |
hh3cTimeMarkCopyTableThis table contains some entity about a TimeMark copy. SEQUENCE OF Hh3cTimeMarkCopyEntry .1.3.6.1.4.1.25506.10.2.1.7 |
hh3cTimeMarkCopyEntryAn entry containing config information applicable to the TimeMark copy. Hh3cTimeMarkCopyEntry .1.3.6.1.4.1.25506.10.2.1.7.1 |
hh3cTMCopyDestLvIdThis object identifies the index of destination logic volume for TimeMark copy.ro Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.7.1.1 |
hh3cTMCopyPercentageThis object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.7.1.2 |
hh3cTMCopyStartTimeThis object identifies the time to start the TimeMark copy.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.7.1.3 |
hh3cTMCopySwitchThis object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.7.1.4 |
hh3cTimeMarkRollbackTableThis table contains some entity to use a TimeMark to rollback the logic volume. SEQUENCE OF Hh3cTimeMarkRollbackEntry .1.3.6.1.4.1.25506.10.2.1.8 |
hh3cTimeMarkRollbackEntryAn entry containing config information applicable to use a TimeMark to rollback the logic volume. Hh3cTimeMarkRollbackEntry .1.3.6.1.4.1.25506.10.2.1.8.1 |
hh3cTMRollbackPercentageThis object identifies the percentage of rollback.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.8.1.1 |
hh3cTMRollbackStartTimeThis object identifies the time to start the rollback.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.8.1.2 |
hh3cTMRollbackSwitchThis object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted.rw Hh3cStorageActionType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.8.1.3 |
hh3cTimeViewTableThis table contains some entity to config a TimeView on a special TimeMark. SEQUENCE OF Hh3cTimeViewEntry .1.3.6.1.4.1.25506.10.2.1.9 |
hh3cTimeViewEntryAn entry containing config information applicable to the TimeView. Hh3cTimeViewEntry .1.3.6.1.4.1.25506.10.2.1.9.1 |
hh3cTimeViewStampThis object identifies the TimeView. The object identified by this index is the same object as identified by the same value of hh3cTimeMarkStamp. DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.9.1.1 |
hh3cTimeViewIDThis object identifies the TimeView.ro Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.9.1.2 |
hh3cTimeViewNameThis object identifies the name of the TimeView.rw OCTET STRING .1.3.6.1.4.1.25506.10.2.1.9.1.3 |
hh3cTimeViewRowStatusThis object describes the actions to create or delete the TimeView.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.9.1.4 |
hh3cReplicaConfigTableThis table contains some entity to config replication for a logic volume. SEQUENCE OF Hh3cReplicaConfigEntry .1.3.6.1.4.1.25506.10.2.1.10 |
hh3cReplicaConfigEntryAn entry containing config information applicable to the replication for a logic volume. Hh3cReplicaConfigEntry .1.3.6.1.4.1.25506.10.2.1.10.1 |
hh3cRepLocalLvIndexThis object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of hh3cSnapLvIndex. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.1 |
hh3cLvRepLocalWayThe value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the hh3cRepLocalLvIndex is the replica logic volume of replication. , and the hh3cRepRemoteLvIndex is the primary logic volume.ro Enumeration .1.3.6.1.4.1.25506.10.2.1.10.1.2 |
hh3cRepLocalServerIPThis object identifies the ip address of local server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.3 |
hh3cRepLocalServerIPTypeThis object identifies the ip address type of local server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.4 |
hh3cRepLocalServerNameThis object identifies the name of local server.ro OCTET STRING .1.3.6.1.4.1.25506.10.2.1.10.1.5 |
hh3cRepLocalServerUsernameThis object identifies the username of local server.rw OCTET STRING .1.3.6.1.4.1.25506.10.2.1.10.1.6 |
hh3cRepLocalServerPasswordThis object identifies the password of local server.rw OCTET STRING .1.3.6.1.4.1.25506.10.2.1.10.1.7 |
hh3cRepRemoteServerIPThis object identifies the ip address of remote server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.8 |
hh3cRepRemoteServerIPTypeThis object identifies the ip address type of remote server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.9 |
hh3cRepRemoteServerNameThis object identifies the name of remote server.ro OCTET STRING .1.3.6.1.4.1.25506.10.2.1.10.1.10 |
hh3cRepRemoteServerUsernameThis object identifies the username of remote server.rw OCTET STRING .1.3.6.1.4.1.25506.10.2.1.10.1.11 |
hh3cRepRemoteServerPasswordThis object identifies the password of remote server.rw OCTET STRING .1.3.6.1.4.1.25506.10.2.1.10.1.12 |
hh3cRepRemoteLvIndexThis object identifies the logic volume of remote server.rw Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.13 |
hh3cReplicaModeThis object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.10.1.14 |
hh3cReplicaWatermarkThis object identifies the size of watermark which means a replication is scheduled.rw Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.10.1.15 |
hh3cReplicaWatermarkRetryIf the 'hh3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.10.1.16 |
hh3cReplicaInitializeTimeThis object identifies the time to start an initial replication.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.10.1.17 |
hh3cReplicaIntervalThis object identifies how often the replication should be repeated after initial replication. The units is minute.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.10.1.18 |
hh3cReplicaEncryptThis object identifies the encrypt option is enable or diable.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.19 |
hh3cReplicaCompressThis object identifies the compress option is enable or diable.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.20 |
hh3cReplicaUseExistTMThis object identifies if using the exist TimeMark to replicate or not.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.10.1.21 |
hh3cReplicaProtocolThis object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.10.1.22 |
hh3cReplicaScanDiffThis object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.10.1.23 |
hh3cReplicaStatSwitchThis object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.10.1.24 |
hh3cReplicaRowStatusThis object identifies the action to enable or disable the replication.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.10.1.25 |
hh3cReplicaStateTableThis table contains some entity to show replication state. SEQUENCE OF Hh3cReplicaStateEntry .1.3.6.1.4.1.25506.10.2.1.11 |
hh3cReplicaStateEntryAn entry containing show information applicable to the replication state. Hh3cReplicaStateEntry .1.3.6.1.4.1.25506.10.2.1.11.1 |
hh3cReplicaDeltaThis object identifies the size of delta data after last sync.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.11.1.1 |
hh3cReplicaLastSyncTimeThis object identifies the date and time when last sync is taken.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.11.1.2 |
hh3cReplicaNextSyncTimeThis object identifies the date and time when next sync will be taken.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.11.1.3 |
hh3cReplicaSyncTotalSizeThis object identifies how much data need to be synchronized to the replica resource for current replication.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.11.1.4 |
hh3cReplicaSyncCurPercentageThis object identifies how much data has been synchronized to the replica resource for current replication.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.11.1.5 |
hh3cReplicaSyncPerformanceThis object identifies the performance of the synchronize. The unit is MB/s.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.11.1.6 |
hh3cReplicaRunStatusThis object identifies the state of the replica.ro Enumeration .1.3.6.1.4.1.25506.10.2.1.11.1.7 |
hh3cCDRConfigTableThis table contains some entity to config Continuous Replication Resource. SEQUENCE OF Hh3cCDRConfigEntry .1.3.6.1.4.1.25506.10.2.1.12 |
hh3cCDRConfigEntryAn entry containing some information applicable to Continuous Replication Resource of the logic volume. Hh3cCDRConfigEntry .1.3.6.1.4.1.25506.10.2.1.12.1 |
hh3cCDRLvIndexThis object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of hh3cRepLocalLvIndex. Note that an entry of hh3cCDRConfigTable can be created only when the associated hh3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cCDRDistributeTable objects should be deleted automatically. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.12.1.1 |
hh3cCDRIDThis object identifies the Continuous Replication Resource.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.12.1.2 |
hh3cCDRStatusThis object identifies the state of the Continuous Replication Resource.ro Hh3cStorageOnlineState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.12.1.3 |
hh3cCDRTotalSizeThis object identifies the total size of the Continuous Replication Resource.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.12.1.4 |
hh3cCDRFreeSizeThis object identifies the free size of the Continuous Replication Resource.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.12.1.5 |
hh3cCDRSelectPolicyThis object describes the policy about allocating the space for Continuous Replication Resource.rw Hh3cExtendSelectPolicy (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.12.1.6 |
hh3cCDRRowStatusThis object identifies the action to create or delete the Continuous Replication Resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.12.1.7 |
hh3cCDRDistributeTableThis table contains some entity to config the distribution of Continuous Replication Resource. SEQUENCE OF Hh3cCDRDistributeEntry .1.3.6.1.4.1.25506.10.2.1.13 |
hh3cCDRDistributeEntryAn entry containing some information applicable to the distribution of Continuous Replication Resource. Hh3cCDRDistributeEntry .1.3.6.1.4.1.25506.10.2.1.13.1 |
hh3cCDRDistLvIndexThis index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.13.1.1 |
hh3cCDRRaidUuidThis index is identical to hh3cRaidUuid in HH3C-RAID-MIB. Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.13.1.2 |
hh3cCDRRaidSizeThis object identifies the size on the special raid distributed for the Continuous Replication Resource.rw Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.13.1.3 |
hh3cCDRExtRowStatusThis object identifies the action to create the distribution for the Continuous Replication Resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.13.1.4 |
hh3cSafeCacheConfigTableThis table contains some entity to config SafeCache. SEQUENCE OF Hh3cSafeCacheConfigEntry .1.3.6.1.4.1.25506.10.2.1.14 |
hh3cSafeCacheConfigEntryAn entry containing some information applicable to SafeCache of the logic volume. Hh3cSafeCacheConfigEntry .1.3.6.1.4.1.25506.10.2.1.14.1 |
hh3cSafeCacheLvIndexThis object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cSafeCacheConfigTable can be created only when the associated hh3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cSafeCacheDistributeTable objects should be deleted automatically. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.14.1.1 |
hh3cSafeCacheIDThis object identifies a SafeCache.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.14.1.2 |
hh3cSafeCacheStatusThis object identifies the state of the SafeCache.ro Hh3cStorageOnlineState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.14.1.3 |
hh3cSafeCacheTotalSizeThis object identifies the total size of the SafeCache. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.14.1.4 |
hh3cSafeCacheFreeSizeThis object identifies the free size of the SafeCache. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.14.1.5 |
hh3cSafeCacheSelectPolicyThis object describes the policy about allocating the space for SafeCache.rw Hh3cExtendSelectPolicy (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.14.1.6 |
hh3cSafeCacheThresholdThis object identifies the maximal percentage of date changed before data flushing.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.14.1.7 |
hh3cSafeCacheFlushTimeThis object identifies the period during which the date can stay in cache before data flushing. The units is second.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.14.1.8 |
hh3cSafeCacheFlushCommandThis object identifies the number of commands when data flushing.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.14.1.9 |
hh3cSafeCacheSkipDupWriteThis object identifies skip duplicate write commands or not.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.14.1.10 |
hh3cSafeCacheRunStatusThis object identifies the run state of the SafeCache.ro Enumeration .1.3.6.1.4.1.25506.10.2.1.14.1.11 |
hh3cSafeCacheSwitchThis object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.14.1.12 |
hh3cSafeCacheRowStatusThis object identifies the action to create or delete the SafeCache.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.14.1.13 |
hh3cSafeCacheDistributeTableThis table contains some entity to config the SafeCache resource. SEQUENCE OF Hh3cSafeCacheDistributeEntry .1.3.6.1.4.1.25506.10.2.1.15 |
hh3cSafeCacheDistributeEntryAn entry containing some information applicable to SafeCache resource of the logic volume. Hh3cSafeCacheDistributeEntry .1.3.6.1.4.1.25506.10.2.1.15.1 |
hh3cSafeCacheDistLvIndexThis index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.15.1.1 |
hh3cSafeCacheRaidUuidThis index is identical to hh3cRaidUuid in HH3C-RAID-MIB. Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.15.1.2 |
hh3cSafeCacheRaidSizeThis object identifies the size on the special raid distributed for the SafeCache resource.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.15.1.3 |
hh3cSafeCacheExtRowStatusThis object identifies the action to create the distribution for the SafeCache resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.15.1.4 |
hh3cMirrorConfigTableThis table contains some entity to config mirror. SEQUENCE OF Hh3cMirrorConfigEntry .1.3.6.1.4.1.25506.10.2.1.16 |
hh3cMirrorConfigEntryAn entry containing some information applicable to mirror for the logic volume. Hh3cMirrorConfigEntry .1.3.6.1.4.1.25506.10.2.1.16.1 |
hh3cMirrorLvIndexThis object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cMirrorConfigTable can be created only when the associated hh3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cMirrorDistributeTable objects should be deleted automatically. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.16.1.1 |
hh3cMirrorTypeThis object identifies the type of the mirror.ro Enumeration .1.3.6.1.4.1.25506.10.2.1.16.1.2 |
hh3cMirrorStatusThis object identifies the state of the mirror resource.ro Hh3cStorageOnlineState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.16.1.3 |
hh3cMirrorNameThis object identifies the name of the mirror resource. it is used when promote mirror resource.rw OCTET STRING .1.3.6.1.4.1.25506.10.2.1.16.1.4 |
hh3cMirrorSyncPercentageThis object identifies the percentage of the mirror sync.ro Integer32 .1.3.6.1.4.1.25506.10.2.1.16.1.5 |
hh3cMirrorSyncPerformanceThis object identifies the performance of the mirror sync. The unit is MB/Sro Integer32 .1.3.6.1.4.1.25506.10.2.1.16.1.6 |
hh3cMirrorDeltaThis object identifies size of delta data after the last mirror sync.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.2.1.16.1.7 |
hh3cMirrorRaidTypeThis object identifies the raid type of the mirror resource.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.16.1.8 |
hh3cMirrorSelectPolicyThis object describes the policy about allocating the space for mirror resource.rw Hh3cExtendSelectPolicy (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.16.1.9 |
hh3cMirrorSwitchThis object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically.rw Enumeration .1.3.6.1.4.1.25506.10.2.1.16.1.10 |
hh3cMirrorExtendRaidUuidThis object identifies the raid of the mirror resource when the primary logic volume resource is extended.rw Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.16.1.11 |
hh3cMirrorRowStatusThis object identifies the action to create or delete the mirror resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.16.1.12 |
hh3cMirrorDistributeTableThis table contains some entity to config the mirror resource. SEQUENCE OF Hh3cMirrorDistributeEntry .1.3.6.1.4.1.25506.10.2.1.17 |
hh3cMirrorDistributeEntryAn entry containing some information applicable to mirror resource for the logic volume. Hh3cMirrorDistributeEntry .1.3.6.1.4.1.25506.10.2.1.17.1 |
hh3cMirrorDistLvIndexThis index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.17.1.1 |
hh3cMirrorRaidUuidThis index is identical to hh3cRaidUuid in HH3C-RAID-MIB. Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.2.1.17.1.2 |
hh3cMirrorRaidSizeThis object identifies the size on the special raid distributed for the mirror resource.rw Integer32 .1.3.6.1.4.1.25506.10.2.1.17.1.3 |
hh3cMirrorExtRowStatusThis object identifies the action to create or delete the distribution for the mirror resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.2.1.17.1.4 |