HH3C-SRV6POLICY-MIB
AI MIB Summary
The HH3C-SRV6POLICY-MIB module enables monitoring and management of Segment Routing over IPv6 Traffic Engineering (SRv6-TE) policies on H3C network devices, specifically tracking policy instantiation, endpoint definitions, and operational state metrics.
This MIB file provides information about SRv6-TE policies.
Main OID:
hh3cSrv6Policy.1.3.6.1.4.1.25506.2.189
53
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
hh3cSrv6PolicyThis MIB file provides information about SRv6-TE policies. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.189 |
hh3cSrv6PolicyNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.189.0 |
hh3cSrv6PolicyStatusChangeAn hh3cSrv6PolicyStatusChange trap signifies that there has been a change in the state of a policy. This trap should be generated when the policy state regresses (e.g., goes from active to Down) or progresses to a terminal state (i.e., down). NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.1 |
hh3cSrv6PolicyBsidConflictBSID conflicts. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.2 |
hh3cSrv6PolicyBsidConflictClearBSID conflicts resolved NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.3 |
hh3cSrv6PolicyDownPolicy down NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.4 |
hh3cSrv6PolicyDownClearPolicy down cleared NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.5 |
hh3cSrv6PolicyResExdUppLimitThe number of used SRv6-TE policy resources exceeded the upper threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.6 |
hh3cSrv6PolicyResExceedClearThe number of used SRv6-TE policy resources fell below the lower threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.7 |
hh3cSrv6PathDownAn hh3cSrv6PathDown trap signifies that there has been a change in the state of a policy primary or backup path. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.8 |
hh3cSrv6PolicySeglistDownAn hh3cSrv6PolicySeglistDown trap signifies that there has been a change in the state of a segment list. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.9 |
hh3cSrv6SeglistDownClearAn hh3cSrv6SeglistDownClear trap signifies that there has been a change in the state of a segment list. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.189.0.10 |
hh3cSrv6PolicyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.189.1 |
hh3cSrv6PolicyResourceTableThis table provides information about SRv6-TE policy resources. SEQUENCE OF Hh3cSrv6PolicyResourceEntry .1.3.6.1.4.1.25506.2.189.1.1 |
hh3cSrv6PolicyResourceEntryInformation of the SRv6-TE policy resource. Hh3cSrv6PolicyResourceEntry .1.3.6.1.4.1.25506.2.189.1.1.1 |
hh3cSrv6PolicyResourceTypeSRv6-TE policy resource type.ro Enumeration .1.3.6.1.4.1.25506.2.189.1.1.1.1 |
hh3cSrv6PolicyResCurrentCntNumber of used SRv6-TE policy resources.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.1.1.2 |
hh3cSrv6PolicyResUpperLimitThe upper threshold of SRv6-TE policy resources.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.1.1.3 |
hh3cSrv6PolicyResLowerLimitThe lower threshold of SRv6-TE policy resources.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.1.1.4 |
hh3cSrv6PolicyResourceTotalCntThe maximum number of SRv6-TE policy resources that can be used.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.1.1.5 |
hh3cSrv6PolicyTableThis table provides information about SRv6-TE policies. SEQUENCE OF Hh3cSrv6PolicyEntry .1.3.6.1.4.1.25506.2.189.1.2 |
hh3cSrv6PolicyEntryEach entry contains information about a policy. Hh3cSrv6PolicyEntry .1.3.6.1.4.1.25506.2.189.1.2.1 |
hh3cSrv6PolicyColorThe color associates the SRv6-TE policy with certain intent.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.2.1.1 |
hh3cSrv6PolicyEndPointThe endpoint is the destination of the SRv6-TE policy.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.189.1.2.1.2 |
hh3cSrv6PolicyNameName of the SRv6-TE policy.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.2.1.3 |
hh3cSrv6PolicyBsidBinding segment ID value of the SRv6-TE policy.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.189.1.2.1.4 |
hh3cSrv6PolicyStatusStatus of the SRv6-TE policy.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.2.1.5 |
hh3cSrv6PolicyDownReasonBase identity for the reasons why SRv6-TE policy is operationally down.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.2.1.6 |
hh3cSrv6PolicyBsidFailReasonReason why the binding SID is unavailable.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.2.1.7 |
hh3cSrv6PolicyBsidConflictStateThe conflict state of the binding SID.ro Enumeration .1.3.6.1.4.1.25506.2.189.1.2.1.8 |
hh3cSrv6PolicyPathTableThis table provides information about SRv6-TE policy candidate paths. SEQUENCE OF Hh3cSrv6PolicyPathEntry .1.3.6.1.4.1.25506.2.189.1.3 |
hh3cSrv6PolicyPathEntryEach entry contains information about candidate paths of a policy. Hh3cSrv6PolicyPathEntry .1.3.6.1.4.1.25506.2.189.1.3.1 |
hh3cSrv6PolicyPathColorThe color associates the SRv6-TE policy with certain intent.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.3.1.1 |
hh3cSrv6PolicyPathEndPointThe endpoint is the destination of the SRv6-TE policy.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.189.1.3.1.2 |
hh3cSrv6PolicyPathProtoProtocol-Origin of a candidate path identifies the protocol that originates or signals the candidate path.ro Enumeration .1.3.6.1.4.1.25506.2.189.1.3.1.3 |
hh3cSrv6PolicyPathInstThe instance is a value of BGP instance number, when the candidate path is originated by BGP.ro Integer32 .1.3.6.1.4.1.25506.2.189.1.3.1.4 |
hh3cSrv6PolicyPathOriOriginator is the identifier of the node that instantiated or signalled the candidate path on the headend.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.3.1.5 |
hh3cSrv6PolicyPathDisThe discriminator uniquely identifies a candidate path from a specific Protocol-Origin.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.3.1.6 |
hh3cSrv6PolicyPathPrefThe preference of the SRv6-TE policy candidate path.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.3.1.7 |
hh3cSrv6PolicyPathPreviousRoleThe previous role of an SRv6-TE policy candidate path. The value may be primary or backup.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.3.1.8 |
hh3cSrv6PolicyPathDownReasonBase identity for the reasons why SRv6-TE policy candidate path is operationally down.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.3.1.9 |
hh3cSrv6PolicySeglistTableThis table provides information about the segment lists for the SRv6-TE policy. SEQUENCE OF Hh3cSrv6PolicySeglistEntry .1.3.6.1.4.1.25506.2.189.1.4 |
hh3cSrv6PolicySeglistEntryEach entry contains information about segment lists. Hh3cSrv6PolicySeglistEntry .1.3.6.1.4.1.25506.2.189.1.4.1 |
hh3cSrv6PolicySeglistColorThe color associates the SRv6-TE policy with certain intent.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.4.1.1 |
hh3cSrv6PolicySeglistEndPointThe endpoint is the destination of the SRv6-TE policy.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.189.1.4.1.2 |
hh3cSrv6PolicySeglistPathProtoProtocol-Origin of a candidate path identifies the protocol that originates or signals the candidate path.ro Enumeration .1.3.6.1.4.1.25506.2.189.1.4.1.3 |
hh3cSrv6PolicySeglistPathInstThe instance is a BGP instance number when the candidate path is originated by BGP.ro Integer32 .1.3.6.1.4.1.25506.2.189.1.4.1.4 |
hh3cSrv6PolicySeglistPathOriOriginator is the identifier of the node that instantiated or signalled the candidate path on the headend.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.4.1.5 |
hh3cSrv6PolicySeglistPathDisThe discriminator uniquely identifies a candidate path from a specific Protocol-Origin.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.4.1.6 |
hh3cSrv6PolicySeglistIdThe ID uniquely identifies the segment list.ro Unsigned32 .1.3.6.1.4.1.25506.2.189.1.4.1.7 |
hh3cSrv6PolicySeglistNameThe name of the segment list.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.4.1.8 |
hh3cSrv6PolicySeglistStatusThe status of segment list.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.4.1.9 |
hh3cSrv6PolicySeglistDownReasonBase identity for the reasons why segment list is down.ro OCTET STRING .1.3.6.1.4.1.25506.2.189.1.4.1.10 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →HH3C-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HH3C-PRODUCT-ID-MIB
SNMP MIB module
1720 objects→
HH3C-DOT11-APMT-MIB
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
643 objects→
HH3C-ACL-MIB
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
538 objects→
HH3C-CBQOS2-MIB
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
472 objects→
HH3C-WIPS-MIB
SNMP MIB module
454 objects→