HH3C-SNA-DLSW-MIB
AI MIB Summary
The HH3C-SNA-DLSW-MIB enables monitoring and management of Data Link Switching (DLSW) sessions and SNA over IP tunneling parameters on H3C network devices. It provides visibility into critical DLSW operational metrics, including active session counts, connection states, and error counters for SNA traffic encapsulation.
private MIB for dlsw
Main OID:
hh3cdlsw.1.3.6.1.4.1.25506.8.37
123
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
123 total| Object Name |
|---|
hh3cdlswprivate MIB for dlsw MODULE-IDENTITY .1.3.6.1.4.1.25506.8.37 |
hh3cdlswNode OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.1 |
hh3cdlswNodeVersionThis value identifies the particular version of the DLSw
standard supported by this DLSw. The first octet is a
hexadecimal value representing the DLSw standard Version
number of this DLSw, and the second is a hexadecimal value
representing the DLSw standard Release number. This
information is reported in DLSw Capabilities Exchange.ro OCTET STRING .1.3.6.1.4.1.25506.8.37.1.1 |
hh3cdlswNodeVendorIDThe value identifies the manufacturer's IEEE-assigned
organizationally Unique Identifier (OUI) of this DLSw.
This information is reported in DLSw Capabilities
Exchange.ro OCTET STRING .1.3.6.1.4.1.25506.8.37.1.2 |
hh3cdlswNodeVersionStringThis string gives product-specific information about
this DLSw (e.g., product name, code release and fix level).
This flows in Capabilities Exchange messages.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.37.1.3 |
hh3cdlswNodeStdPacingSupportCircuit pacing, as defined in the DLSw Standard, allows each
of the two DLSw nodes on a circuit to control the amount
of data the other is permitted to send to them. This object
reflects the level of support the DLSw node has for this
protocol. (1) means the node has no support for the standard
circuit pacing flows; it may use RFC 1434+ methods only, or
a proprietary flow control scheme. (2) means the node supports
the standard scheme and can vary the window sizes it grants as
a data receiver. (3) means the node supports the standard
scheme but never varies its receive window size.ro Enumeration .1.3.6.1.4.1.25506.8.37.1.4 |
hh3cdlswNodeStatusThe status of the DLSw part of the system.rw Enumeration .1.3.6.1.4.1.25506.8.37.1.5 |
hh3cdlswNodeVirtualSegmentLFSizeThe largest frame size (including DLC header and info field
but not any MAC-level or framing octets) this DLSw can forward
on any path through itself. This object can represent any box-
level frame size forwarding restriction (e.g., from the use
of fixed-size buffers). Some DLSw implementations will have
no such restriction.
This value will affect the LF size of circuits during circuit
creation. The LF size of an existing circuit can be found in
the RIF (Routing Information Field).rw LFSize .1.3.6.1.4.1.25506.8.37.1.6 |
hh3cdlswNodeLocalAddrLocal peer ip address.rw IpAddress .1.3.6.1.4.1.25506.8.37.1.7 |
hh3cdlswNodePriorityThe priority value of local peer. 65535 expresses the value is unknownrw INTEGER (1..5|65535) .1.3.6.1.4.1.25506.8.37.1.8 |
hh3cdlswNodeInitWindowThe vlaue of init-window. 65535 expresses the value is unknownrw INTEGER (1..2000|65535) .1.3.6.1.4.1.25506.8.37.1.9 |
hh3cdlswNodeKeepAliveThe vlaue of keepalive interval. 65535 expresses the value is unknownrw INTEGER (1..2000|65535) .1.3.6.1.4.1.25506.8.37.1.10 |
hh3cdlswNodeMaxWindowThe value of max-window. 65535 expresses the value is unknownrw INTEGER (1..2000|65535) .1.3.6.1.4.1.25506.8.37.1.11 |
hh3cdlswNodePermitDynamicTo accept connections from non-configured remote peers when
permit-dynamic is setted.rw Enumeration .1.3.6.1.4.1.25506.8.37.1.12 |
hh3cdlswNodeConnTimeoutDefine connected state timer(The unit is a thousandth of a
second).rw INTEGER .1.3.6.1.4.1.25506.8.37.1.13 |
hh3cdlswNodeLocalPendTimeoutDefine connected state timer(The unit is a thousandth of a
second).rw INTEGER .1.3.6.1.4.1.25506.8.37.1.14 |
hh3cdlswNodeRemotePendTimeoutDefine connected state timer(The unit is a thousandth of a
second).rw INTEGER .1.3.6.1.4.1.25506.8.37.1.15 |
hh3cdlswNodeSnaCacheTimeoutDefine connected state timer(The unit is a thousandth of a
second).rw INTEGER .1.3.6.1.4.1.25506.8.37.1.16 |
hh3cdlswTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.1.20 |
hh3cdlswTrapCntlStateIt is used to indicate whether the DLSw is permitted to emit traps.rw Enumeration .1.3.6.1.4.1.25506.8.37.1.20.1 |
hh3cdlswTConn OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.2 |
hh3cdlswRemotePeerTableA list of tcp transport connections. SEQUENCE OF Hh3cDlswRemotePeerEntry .1.3.6.1.4.1.25506.8.37.2.1 |
hh3cdlswRemotePeerEntryA list of remote peer information Hh3cDlswRemotePeerEntry .1.3.6.1.4.1.25506.8.37.2.1.1 |
hh3cdlswRemotePeerAddrThe remote peer address for this transport connection.ro IpAddress .1.3.6.1.4.1.25506.8.37.2.1.1.1 |
hh3cdlswRemotePeerVersionThis value identifies which version (first octet) and release
(second octet) of the DLSw standard is supported by this
partner DLSw. This information is obtained from a DLSw
capabilities exchange message received from the partner DLSw.
A string of zero length is returned before a Capabilities
Exchange message is received, or if one is never received.
A conceptual row with a hh3cdlswTConnOperState of `connected' but
a zero length partner version indicates that the partner is
a non-standard DLSw partner.
If an implementation chooses to keep hh3cdlswTConnOperEntrys in
the `disconnected' state, this value should remain unchanged.ro OCTET STRING .1.3.6.1.4.1.25506.8.37.2.1.1.2 |
hh3cdlswRemotePeerVendorIDThis value identifies the IEEE-assigned organizationally
Unique Identifier (OUI) of the maker of this partner
DLSw. This information is obtained from a DLSw
capabilities exchange message received from the partner DLSw.
A string of zero length is returned before a Capabilities
Exchange message is received, or if one is never received.
If an implementation chooses to keep hh3cdlswTConnOperEntrys in
the `disconnected' state, this value should remain unchanged.ro OCTET STRING .1.3.6.1.4.1.25506.8.37.2.1.1.3 |
hh3cdlswRemotePeerPaceWindInitThe value of the partner initial receive pacing window. This
is our initial send pacing window for all new circuits on this
transport connection, as modified and granted by the first flow
control indication the partner sends on each circuit.
This information is obtained from a DLSw capabilities exchange
message received from the partner DLSw.
A value of zero is returned before a Capabilities
Exchange message is received, or if one is never received.
If an implementation chooses to keep hh3cdlswTConnOperEntrys in
the `disconnected' state, this value should remain unchanged.ro INTEGER .1.3.6.1.4.1.25506.8.37.2.1.1.4 |
hh3cdlswRemotePeerVersionStringThis value identifies the particular product version (e.g.,
product name, code level, fix level) of this partner DLSw.
The format of the actual version string is vendor-specific.
This information is obtained from a DLSw capabilities exchange
message received from the partner DLSw.
A string of zero length is returned before a Capabilities
Exchange message is received, if one is never received, or
if one is received but it does not contain a version string.
If an implementation chooses to keep hh3cdlswTConnOperEntrys in
the `disconnected' state, this value should remain unchanged.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.37.2.1.1.5 |
hh3cdlswRemotePeerIsConfigThe current remote peer is configrured when the value is 'yes'.ro Enumeration .1.3.6.1.4.1.25506.8.37.2.1.1.6 |
hh3cdlswRemotePeerCostThe cost for remote peer.rw INTEGER .1.3.6.1.4.1.25506.8.37.2.1.1.7 |
hh3cdlswRemotePeerKeepAliveThe keepalive interval value.rw INTEGER .1.3.6.1.4.1.25506.8.37.2.1.1.8 |
hh3cdlswRemotePeerLfThe the largest frame size.rw LFSize .1.3.6.1.4.1.25506.8.37.2.1.1.9 |
hh3cdlswRemotePeerTcpQueneMaxThe max tcp queue value.rw INTEGER .1.3.6.1.4.1.25506.8.37.2.1.1.10 |
hh3cdlswRemotePeerHaveBackupThere is another remote peer whitch is configrued as the
backup of the current remote peer .ro Enumeration .1.3.6.1.4.1.25506.8.37.2.1.1.11 |
hh3cdlswRemotePeerIsBackupThe current remote peer is configrued as the
backup of another configured remote peer .ro Enumeration .1.3.6.1.4.1.25506.8.37.2.1.1.12 |
hh3cdlswRemotePeerBackupAddrIt is the IP ADDRESS of an configured remote peer of whitch
the current remote peer is configrued as the backupro IpAddress .1.3.6.1.4.1.25506.8.37.2.1.1.13 |
hh3cdlswRemotePeerLingerBuckup Peer lingerrw INTEGER .1.3.6.1.4.1.25506.8.37.2.1.1.14 |
hh3cdlswRemotePeerLinkStateThe state of this tcp transport connection.ro Enumeration .1.3.6.1.4.1.25506.8.37.2.1.1.15 |
hh3cdlswRemotePeerRecvPacksThe number of Switch-to-Switch Protocol (SSP) messages
received on this tcp transport connection.ro Counter32 .1.3.6.1.4.1.25506.8.37.2.1.1.16 |
hh3cdlswRemotePeerSendPacksThe number of Switch-to-Switch Protocol (SSP) messages
sent on this tcp transport connection.ro Counter32 .1.3.6.1.4.1.25506.8.37.2.1.1.17 |
hh3cdlswRemotePeerDropsThe number of Switch-to-Switch Protocol (SSP) messages
dropped on this tcp transport connection.ro Counter32 .1.3.6.1.4.1.25506.8.37.2.1.1.18 |
hh3cdlswRemotePeerUptimeThe amount of time (in seconds ) since this transport
connection last entered the 'connected' state.ro Counter32 .1.3.6.1.4.1.25506.8.37.2.1.1.19 |
hh3cdlswRemotePeerEntryStatusThis object is used by the manager to create
or delete the row entry in the hh3cdlswRemotePeerTable
following the EntryStatus textual convention.rw EntryStatus .1.3.6.1.4.1.25506.8.37.2.1.1.20 |
hh3cdlswBridgeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.3 |
hh3cdlswBridgeTableThe list of bridge group whitch has been created. SEQUENCE OF Hh3cDlswBridgeEntry .1.3.6.1.4.1.25506.8.37.3.1 |
hh3cdlswBridgeEntryThe list of bridge information Hh3cDlswBridgeEntry .1.3.6.1.4.1.25506.8.37.3.1.1 |
hh3cdlswBridgeNumThis value identifies the bridge number .ro INTEGER .1.3.6.1.4.1.25506.8.37.3.1.1.1 |
hh3cdlswBridgeStatusThis value whitch is equal to 'DeleteLine' identifies to
delete a conceptual raw.rw CreateLineFlag .1.3.6.1.4.1.25506.8.37.3.1.1.2 |
hh3cdlswBridgeIfTableThe list of interfaces on which DLSw is active. SEQUENCE OF Hh3cDlswBridgeIfEntry .1.3.6.1.4.1.25506.8.37.3.2 |
hh3cdlswBridgeIfEntryThe list of bridge interface information Hh3cDlswBridgeIfEntry .1.3.6.1.4.1.25506.8.37.3.2.1 |
hh3cdlswBridgeIfBriGruThis value identifies the bridge number attached
to the interface.rw INTEGER .1.3.6.1.4.1.25506.8.37.3.2.1.1 |
hh3cdlswBridgeIfNameThe name of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.37.3.2.1.2 |
hh3cdlswBridgeIfStatusThis value whitch is equal to 'invalid' identifies to
delete a conceptual rawrw EntryStatus .1.3.6.1.4.1.25506.8.37.3.2.1.3 |
hh3cdlswLocDirectory OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.4 |
hh3cdlswLocMacTableThis table contains locations of MAC addresses.
They are local and reachable SEQUENCE OF Hh3cDlswLocMacEntry .1.3.6.1.4.1.25506.8.37.4.1 |
hh3cdlswLocMacEntry Hh3cDlswLocMacEntry .1.3.6.1.4.1.25506.8.37.4.1.1 |
hh3cdlswLocMacHashIndexThe hash value.ro INTEGER .1.3.6.1.4.1.25506.8.37.4.1.1.1 |
hh3cdlswLocMacHashIndexSeqNumThe sequence num with smae hash value.ro INTEGER .1.3.6.1.4.1.25506.8.37.4.1.1.2 |
hh3cdlswLocMacMacThe MAC address.ro MacAddressNC .1.3.6.1.4.1.25506.8.37.4.1.1.3 |
hh3cdlswLocMacLocalInterfaceNameThe value is the interface name when
hh3cdlswLocMacLocationType is 'local'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.37.4.1.1.4 |
hh3cdlswCircuit OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.5 |
hh3cdlswCircuitTableThis table is the circuit representation in the DLSw
entity. Virtual data links are used to represent any internal
end stations. There is a conceptual row associated with
each data link. Thus, for circuits without an intervening
transport connection, there are two conceptual rows
for each circuit.
The table consists of the circuits being established,
established, and as an implementation option, circuits that
have been disconnected. For circuits carried over
transport connections, an entry is created after
the CUR_cs was sent or received. For circuits between
two locally attached devices, or internal virtual MAC
addresses, an entry is created when the equivalent of
CUR_cs sent/received status is reached.
End station 1 (S1) and End station 2 (S2) are used to
represent the two end stations of the circuit.
S1 is always an end station which is locally attached.
S2 may be locally attached or remote. If it is locally
attached, the circuit will be represented by two rows indexed
by (A, B) and (B, A) where A & B are the relevant MACs/SAPs.
The table may be used to store the causes of disconnection of
circuits. It is recommended that the oldest disconnected
circuit entry be removed from this table when the memory
space of disconnected circuits is needed. SEQUENCE OF Hh3cDlswCircuitEntry .1.3.6.1.4.1.25506.8.37.5.1 |
hh3cdlswCircuitEntrythe list of circuit information Hh3cDlswCircuitEntry .1.3.6.1.4.1.25506.8.37.5.1.1 |
hh3cdlswCircuitS1CircuitIdThe Circuit ID assigned by this DLSw node to this circuit.
The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw SSP was not used to establish this circuit,
the value will be a string of zero length.ro INTEGER .1.3.6.1.4.1.25506.8.37.5.1.1.1 |
hh3cdlswCircuitS1MacThe MAC Address of End Station 1 (S1) used for this circuit.ro MacAddressNC .1.3.6.1.4.1.25506.8.37.5.1.1.2 |
hh3cdlswCircuitS1SapThe SAP at End Station 1 (S1) used for this circuit.ro OCTET STRING .1.3.6.1.4.1.25506.8.37.5.1.1.3 |
hh3cdlswCircuitS2MacThe MAC Address of End Station 2 (S2) used for this circuit.ro MacAddressNC .1.3.6.1.4.1.25506.8.37.5.1.1.4 |
hh3cdlswCircuitS2SapThe SAP at End Station 2 (S2) used for this circuit.ro OCTET STRING .1.3.6.1.4.1.25506.8.37.5.1.1.5 |
hh3cdlswCircuitS1IfIndexThe ifEntry index of the local interface through which S1
can be reached.ro INTEGER .1.3.6.1.4.1.25506.8.37.5.1.1.6 |
hh3cdlswCircuitS1IfnameThe name of the interface whose Ifdex is hh3cdlswCircuitS1IfIndex.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.37.5.1.1.7 |
hh3cdlswCircuitS1DlcTypeThe DLC protocol in use between the DLSw node and S1.ro DlcType .1.3.6.1.4.1.25506.8.37.5.1.1.8 |
hh3cdlswCircuitS2TAddressIf the location of End Station 2 is remote,
this object contains the address of the partner
DLSw, else it will be an OCTET STRING of zero length.ro IpAddress .1.3.6.1.4.1.25506.8.37.5.1.1.9 |
hh3cdlswCircuitS2CircuitIdThe Circuit ID assigned to this circuit by the partner
DLSw node. The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw SSP was not used to establish this circuit,
the value will be a string of zero length.ro INTEGER .1.3.6.1.4.1.25506.8.37.5.1.1.10 |
hh3cdlswCircuitOriginThis object specifies which of the two end stations
initiated the establishment of this circuit.ro Enumeration .1.3.6.1.4.1.25506.8.37.5.1.1.11 |
hh3cdlswCircuitEntryTimeThe amount of time (in hundredths of a second) since this
circuit table conceptual row was created.ro TimeTicks UNITS "hundredths of a second" .1.3.6.1.4.1.25506.8.37.5.1.1.12 |
hh3cdlswCircuitStateTimeThe amount of time (in hundredths of a second) since this
circuit entered the current state.ro TimeTicks UNITS "hundredths of a second" .1.3.6.1.4.1.25506.8.37.5.1.1.13 |
hh3cdlswCircuitStateThe current state of this circuit. The agent, implementation
specific, may choose to keep entries for some period of time
after circuit disconnect, so the manager can gather the time
and cause of disconnection.
While all of the specified values may be returned from a GET
operation, the only SETable value is `disconnectPending'.
When this value is set, DLSw should perform the appropriate
action given its previous state (e.g., send HALT_DL if the
state was `connected') to bring the circuit down to the
`disconnected' state. Both the partner DLSw and local end
station(s) should be notified as appropriate.
This MIB provides no facility to re-establish a disconnected
circuit, because in DLSw this should be an end station-driven
function.ro Enumeration .1.3.6.1.4.1.25506.8.37.5.1.1.14 |
hh3cdlswCircuitFCSendGrantedUnitsThe number of paced SSP messages that this DLSw is currently
authorized to send on this circuit before it must stop and
wait for an additional flow control indication from the
partner DLSw.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol.ro INTEGER .1.3.6.1.4.1.25506.8.37.5.1.1.15 |
hh3cdlswCircuitFCSendCurrentWndwThe current window size that this DLSw is using in its role
as a data sender. This is the value by which this DLSw would
increase the number of messages it is authorized to send, if
it were to receive a flow control indication with the bits
specifying `repeat window'.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol.ro INTEGER .1.3.6.1.4.1.25506.8.37.5.1.1.16 |
hh3cdlswCircuitFCRecvGrantedUnitsThe current number of paced SSP messages that this DLSw has
authorized the partner DLSw to send on this circuit before
the partner DLSw must stop and wait for an additional flow
control indication from this DLSw.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol.ro INTEGER .1.3.6.1.4.1.25506.8.37.5.1.1.17 |
hh3cdlswCircuitFCRecvCurrentWndwThe current window size that this DLSw is using in its role
as a data receiver. This is the number of additional paced
SSP messages that this DLSw would be authorizing its DLSw
partner to send, if this DLSw were to send a flow control
indication with the bits specifying `repeat window'.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol.ro INTEGER .1.3.6.1.4.1.25506.8.37.5.1.1.18 |
hh3cdlswSdlc OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.6 |
hh3cdlswSdlcPortTableThe table defines parameters for the interfaces with the
encapunation of SDLC. SEQUENCE OF Hh3cDlswSdlcPortEntry .1.3.6.1.4.1.25506.8.37.6.1 |
hh3cdlswSdlcPortEntry Hh3cDlswSdlcPortEntry .1.3.6.1.4.1.25506.8.37.6.1.1 |
hh3cdlswSdlcPortSerialNameThe name of serial port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.37.6.1.1.1 |
hh3cdlswSdlcPortEncapThe encapunation of the interface.ro Enumeration .1.3.6.1.4.1.25506.8.37.6.1.1.2 |
hh3cdlswSdlcPortRoleThe SDLC role of interface.rw Enumeration .1.3.6.1.4.1.25506.8.37.6.1.1.3 |
hh3cdlswSdlcPortVmacDefine virtual mac address.rw MacAddressNC .1.3.6.1.4.1.25506.8.37.6.1.1.4 |
hh3cdlswSdlcPortHoldqSize of hold queue.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.1.1.5 |
hh3cdlswSdlcPortKSize of local send window.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.1.1.6 |
hh3cdlswSdlcPortModuleSize of modulus.rw Enumeration .1.3.6.1.4.1.25506.8.37.6.1.1.7 |
hh3cdlswSdlcPortN1Max number of bits for incoming frames.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.1.1.8 |
hh3cdlswSdlcPortN2Number of timers to retry an operation.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.1.1.9 |
hh3cdlswSdlcPortPollPauseTimerTime between polls for each secondary SDLC station.
The unit is thousandth of a second.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.1.1.10 |
hh3cdlswSdlcPortSimultaneousEnableActivate SDLC two-way simultaneous mode.rw Enumeration .1.3.6.1.4.1.25506.8.37.6.1.1.11 |
hh3cdlswSdlcPortT1Time to wait for a reply to a frame.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.1.1.12 |
hh3cdlswSdlcPortT2Time to wait for a reply used by secondary station.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.1.1.13 |
hh3cdlswSdlcLsTableThe table defines the virtual MAC addresses for those
SDLC link stations that participate in data link switching. SEQUENCE OF Hh3cDlswSdlcLsEntry .1.3.6.1.4.1.25506.8.37.6.2 |
hh3cdlswSdlcLsEntry Hh3cDlswSdlcLsEntry .1.3.6.1.4.1.25506.8.37.6.2.1 |
hh3cdlswSdlcLsAddressDefine SDLC address.ro INTEGER .1.3.6.1.4.1.25506.8.37.6.2.1.1 |
hh3cdlswSdlcLsLocalIdThe value is XID.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.2.1.2 |
hh3cdlswSdlcLsRemoteMacThe MAC address to which DLSw should attempt to connect
this link station. If this information is not available,
a length of zero for this object should be returnedrw MacAddressNC .1.3.6.1.4.1.25506.8.37.6.2.1.3 |
hh3cdlswSdlcLsSsapSource SAP of partner.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.2.1.4 |
hh3cdlswSdlcLsDsapDestination SAP of partner.rw INTEGER .1.3.6.1.4.1.25506.8.37.6.2.1.5 |
hh3cdlswSdlcLsStatusThis object is used by the manager to create
or delete the row entry in the hh3cdlswSdlcLsTable
following the EntryStatus textual convention.rw EntryStatus .1.3.6.1.4.1.25506.8.37.6.2.1.6 |
hh3cdlswLlc2 OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.7 |
hh3cdlswLlc2PortTableThe table defines parameters for the interfaces with the
encapunation of Llc2. SEQUENCE OF Hh3cDlswLlc2PortEntry .1.3.6.1.4.1.25506.8.37.7.1 |
hh3cdlswLlc2PortEntry Hh3cDlswLlc2PortEntry .1.3.6.1.4.1.25506.8.37.7.1.1 |
hh3cdlswLLC2PortAckDelayTimeMax time allows I-frames incoming without replay ACK.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.1 |
hh3cdlswLLC2PortAckMaxMax number of I-frames received before ACK.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.2 |
hh3cdlswLLC2PortLocalWndMax number of I-frames to send before received ACK.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.3 |
hh3cdlswLLC2PortModulusModulus of LLC2.rw Enumeration .1.3.6.1.4.1.25506.8.37.7.1.1.4 |
hh3cdlswLLC2PortN2Retry times of operations.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.5 |
hh3cdlswLLC2PortT1Waiting for ACK time after sent a I-frame.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.6 |
hh3cdlswLLC2PortTbusyTimeWaiting time while other LLC2 station is in busy state.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.7 |
hh3cdlswLLC2PortTpfTimeWaiting time after a P frame is sent.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.8 |
hh3cdlswLLC2PortTrejTimeWaiting time after a REJ frame is sent.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.9 |
hh3cdlswLLC2PortTxqMaxQueue for sending llc2 I-frames.rw INTEGER .1.3.6.1.4.1.25506.8.37.7.1.1.10 |
hh3cdlswTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.8 |
hh3cdlswTrapsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.37.8.0 |
hh3cdlswTrapTConnPartnerRejectThis trap is sent each time a transport connection
is rejected by a partner DLSw during Capabilities
Exchanges. The emission of this trap is controlled
by hh3cdlswTrapCntlCircuit. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.37.8.0.1 |
hh3cdlswTrapTConnChangeStateThis trap is sent each time a transport connection
changes state. The emission of this trap
is controlled by hh3cdlswTrapCntlTConn. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.37.8.0.2 |
hh3cdlswTrapCircuitChangeStateThis trap is sent each time a circuit change
state. The emission of this trap is controlled by
hh3cdlswTrapCntlCircuit. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.37.8.0.3 |