HH3C-RPR-MIB
This MIB manages RPR(Resilient Packet Ring)interfaces by providing an operational table which controls parameters of each RPR interface and reports alarm conditions. A RPR ring is composed of two fiber rings: Outer and Inner.
Main OID:
hh3cRpr.1.3.6.1.4.1.25506.2.60
130
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
130 total| Object Name |
|---|
hh3cRprThis MIB manages RPR(Resilient Packet Ring)interfaces by providing an operational table which controls parameters of each RPR interface and reports alarm conditions. A RPR ring is composed of two fiber rings: Outer and Inner. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.60 |
hh3cRprObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1 |
hh3cRprMaxmumDefine OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.1 |
hh3cRprMaxmumDefineTableThis table contains the specs of RPR ring. SEQUENCE OF Hh3cRprMaxmumDefineEntry .1.3.6.1.4.1.25506.2.60.1.1.1 |
hh3cRprMaxmumDefineEntryThe entry of RPR Maximum Table. Hh3cRprMaxmumDefineEntry .1.3.6.1.4.1.25506.2.60.1.1.1.1 |
hh3cRprMaxMumIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.1.1.1.1 |
hh3cRprMaxStationNumDefineMax station number supported by RPR ring.ro INTEGER .1.3.6.1.4.1.25506.2.60.1.1.1.1.2 |
hh3cRprMaxReservedRateDefineMax reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.ro Gauge32 .1.3.6.1.4.1.25506.2.60.1.1.1.1.3 |
hh3cRprTopoImage OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.2 |
hh3cRprTopoImageXTableThis table contains additional objects for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB. SEQUENCE OF Hh3cRprTopoImageXEntry .1.3.6.1.4.1.25506.2.60.1.2.1 |
hh3cRprTopoImageXEntryEach entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zero hops on each ringlet. Hh3cRprTopoImageXEntry .1.3.6.1.4.1.25506.2.60.1.2.1.1 |
hh3cRprTopoImageXWestEdgeStatusThe current edge status of the west span. If an edge exists,the hh3cRprTopoImageXWestEdgeStatus is true. Otherwise, the hh3cRprTopoImageXWestEdgeStatus is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.2.1.1.3 |
hh3cRprTopoImageXEastEdgeStatusThe current edge status of the east span. If an edge exists, the hh3cRprTopoImageXEastEdgeStatus is true. Otherwise, the hh3cRprTopoImageXEastEdgeStatus is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.2.1.1.4 |
hh3cRprTopoImageXStationNameThe operator assigned station name. The operator can assigned it by hh3cRprTopoImageXStationName.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.25506.2.60.1.2.1.1.5 |
hh3cRprSpanCounters OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.3 |
hh3cRprSrcMacCountTableThe RPR Source Mac Count Table contains the cumulative sum of frames and octects from the particular source station. SEQUENCE OF Hh3cRprSrcMacCountEntry .1.3.6.1.4.1.25506.2.60.1.3.1 |
hh3cRprSrcMacCountEntryAn entry in the RPR Source Mac Count Table. Hh3cRprSrcMacCountEntry .1.3.6.1.4.1.25506.2.60.1.3.1.1 |
hh3cRprSrcMacCountIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.3.1.1.1 |
hh3cRprSrcMacCountBySrcAddressMAC address of the source station where the frames come from. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.3.1.1.2 |
hh3cRprSrcMacCountReceivedFramesFrames received from a particular MAC address of source station.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.1.1.3 |
hh3cRprSrcMacCountReceivedOctetsOctets received from a particular MAC address of source station.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.1.1.4 |
hh3cRprDestMacCountTableThe RPR Destination MAC Count Table contains the cumulative sum of frames and octects to the particular destination station. SEQUENCE OF Hh3cRprDestMacCountEntry .1.3.6.1.4.1.25506.2.60.1.3.2 |
hh3cRprDestMacCountEntryAn entry in the RPR MAC Destination Count Table. Hh3cRprDestMacCountEntry .1.3.6.1.4.1.25506.2.60.1.3.2.1 |
hh3cRprDestMacCountIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.3.2.1.1 |
hh3cRprDestMacCountByDestAddressMAC address of the destination station where the frames are sent to. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.3.2.1.2 |
hh3cRprDestMacCountReceivedFramesFrames sent to a particular MAC address of destination station.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.2.1.3 |
hh3cRprDestMacCountReceivedOctetsOctets sent to a particular MAC address of destination station.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.2.1.4 |
hh3cRprPktDropCountTableThe RPR Packet Drop Count Table contains the cumulative sum of packets dropped for congestion. SEQUENCE OF Hh3cRprPktDropCountEntry .1.3.6.1.4.1.25506.2.60.1.3.3 |
hh3cRprPktDropCountEntryAn entry in the RPR Packet Drop Count Table. Hh3cRprPktDropCountEntry .1.3.6.1.4.1.25506.2.60.1.3.3.1 |
hh3cRprPktDropCntIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.3.3.1.1 |
hh3cRprPktDropCntRingletIDThe RPR Ringlet of the station through which the packets transmit. Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.3.3.1.2 |
hh3cRprDownFlowClassAPktDropsThe total dropped number of Class A packets which transmit down from the host.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.3.1.3 |
hh3cRprUpFlowClassAPktDropsThe total dropped number of Class A packets which transmit up to the host.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.3.1.4 |
hh3cRprDownFlowClassBPktDropsThe total dropped number of Class B packets which transmit down from the host.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.3.1.5 |
hh3cRprUpFlowClassBPktDropsThe total dropped number of Class B packets which transmit up to the host.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.3.1.6 |
hh3cRprDownFlowClassCPktDropsThe total dropped number of Class C packets which transmit down from the host.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.3.1.7 |
hh3cRprUpFlowClassCPktDropsThe total dropped number of Class C packets which transmit up to the host.ro Counter64 .1.3.6.1.4.1.25506.2.60.1.3.3.1.8 |
hh3cRprRS OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.4 |
hh3cRprStaticRSTableThe RPR Static Ring Selection table contains the static ring selection information by the way of configuration. SEQUENCE OF Hh3cRprStaticRSEntry .1.3.6.1.4.1.25506.2.60.1.4.1 |
hh3cRprStaticRSEntryAn entry in the RPR Static Ring Selection table. Hh3cRprStaticRSEntry .1.3.6.1.4.1.25506.2.60.1.4.1.1 |
hh3cRprStaticRSIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.4.1.1.1 |
hh3cRprStaticRSMacAddressThe MAC address of the station on the ring. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.4.1.1.2 |
hh3cRprStaticRSRingletIDThe identifier of the ring which frames are sent from one station to another. Ringlet0 refers to outer ring, while ringlet1 does inner.rw Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.4.1.1.3 |
hh3cRprStaticRSTtlThe hops from source station to destination station by the selected ringlet.ro INTEGER .1.3.6.1.4.1.25506.2.60.1.4.1.1.4 |
hh3cRprStaticRSValidThe flag identify whether the configed ringlet is valid. If it is true, the configed ringlet is valid, otherwise it's invalid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.4.1.1.5 |
hh3cRprStaticRSRowStatusThe status of this table entry. The status includes createAndGo, active and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.4.1.1.6 |
hh3cRprIpv4DynamicRSTableThe RPR Ipv4Dynamic Ring Selection Table that contains the dynamic ring selection information by shortest path. SEQUENCE OF Hh3cRprIpv4DynamicRSEntry .1.3.6.1.4.1.25506.2.60.1.4.2 |
hh3cRprIpv4DynamicRSEntryAn entry in the RPR Ipv4Dynamic Ring Selection Table. Hh3cRprIpv4DynamicRSEntry .1.3.6.1.4.1.25506.2.60.1.4.2.1 |
hh3cRprIpv4DynamicRSIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.4.2.1.1 |
hh3cRprIpv4DynamicRSMacAddressThe Ipv4 MAC address of destination station on the ring. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.4.2.1.2 |
hh3cRprIpv4DynamicRSRingletIDThe identifier of the ring which frames are sent from the source station to the destination station.ro Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.4.2.1.3 |
hh3cRprIpv4DynamicRSTtlThe hops from source station to destination station by the selected ringlet.ro INTEGER .1.3.6.1.4.1.25506.2.60.1.4.2.1.4 |
hh3cRprIpv6DynamicRSTableThe RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6 ring selection information by dynamic ring selection and static ring selection. SEQUENCE OF Hh3cRprIpv6DynamicRSEntry .1.3.6.1.4.1.25506.2.60.1.4.3 |
hh3cRprIpv6DynamicRSEntryAn entry in the RPR Ipv6 Ring Selection Table. Hh3cRprIpv6DynamicRSEntry .1.3.6.1.4.1.25506.2.60.1.4.3.1 |
hh3cRprIpv6DynamicRSIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.4.3.1.1 |
hh3cRprIpv6DynamicRSMacAddressThe Ipv6 MAC address of the destination station on the ring. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.4.3.1.2 |
hh3cRprIpv6DynamicRSRingletIDThe identifier of the ring which frames are sent from the source station to the destination station.ro Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.4.3.1.3 |
hh3cRprIpv6DynamicRSTtlThe hops from source station to destination station by selected ringlet.ro INTEGER .1.3.6.1.4.1.25506.2.60.1.4.3.1.4 |
hh3cRprIpv4OverallRSTableThe RPR Ipv4 Overall Ring Selection Table that contains the overall and active ring selection infomation by dynamic ring selection and static ring selection. SEQUENCE OF Hh3cRprIpv4OverallRSEntry .1.3.6.1.4.1.25506.2.60.1.4.4 |
hh3cRprIpv4OverallRSEntryAn entry in the RPR Overall Ring Selection Table. Hh3cRprIpv4OverallRSEntry .1.3.6.1.4.1.25506.2.60.1.4.4.1 |
hh3cRprIpv4OverallRSIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.4.4.1.1 |
hh3cRprIpv4OverallRSMacAddressThe MAC address of the destination station on the ring. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.4.4.1.2 |
hh3cRprIpv4OverallRSTypeThe ring selection item type indicates static or dynamic.ro Enumeration .1.3.6.1.4.1.25506.2.60.1.4.4.1.3 |
hh3cRprIpv4OverallRSRingletIDThe identifier of the ring which frames are sent from the source station to the destination station.ro Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.4.4.1.4 |
hh3cRprIpv4OverallRSTtlThe hops from source station to destination station by selected ringlet.ro INTEGER .1.3.6.1.4.1.25506.2.60.1.4.4.1.5 |
hh3cRprVrrpRSTableThe RPR VRRP Ring Selection Table that contains the ring selection information when the vrrp group is configured. SEQUENCE OF Hh3cRprVrrpRSEntry .1.3.6.1.4.1.25506.2.60.1.4.5 |
hh3cRprVrrpRSEntryAn entry in the RPR VRRP Ring Selection Table. Hh3cRprVrrpRSEntry .1.3.6.1.4.1.25506.2.60.1.4.5.1 |
hh3cRprVrrpRSIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.4.5.1.1 |
hh3cRprVrrpRSVirtualMacAddressThe virtual MAC address of the staion in VRRP group. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.4.5.1.2 |
hh3cRprVrrpRSMacAddressThe MAC address of the station that is the master in VRRP group.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.4.5.1.3 |
hh3cRprVrrpRSRingletIDThe identifier of the ring which frames are sent from the source station to the destination station.ro Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.4.5.1.4 |
hh3cRprVrrpRSTtlThe hops from source station to destination station by selected ringlet.ro INTEGER .1.3.6.1.4.1.25506.2.60.1.4.5.1.5 |
hh3cRprDefaultRingIDTableThe RPR Default RingID Table specify the default ringID. SEQUENCE OF Hh3cRprDefaultRingIDEntry .1.3.6.1.4.1.25506.2.60.1.4.6 |
hh3cRprDefaultRingIDEntryAn entry in the RPR Default RingID Table. Hh3cRprDefaultRingIDEntry .1.3.6.1.4.1.25506.2.60.1.4.6.1 |
hh3cRprDefaultRingIDIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.4.6.1.1 |
hh3cRprDefaultConfigRingletIDThe default identifier of the ring configured by user.rw Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.4.6.1.2 |
hh3cRprDefaultActiveRingIDThe identifier of the default ring which is active currently. The default ring configured by user may be inactive.ro Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.4.6.1.3 |
hh3cRprDefect OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.5 |
hh3cRprDefectReportTableThe RPR Defect Report Table that contains the trap information on the ring. SEQUENCE OF Hh3cRprDefectReportEntry .1.3.6.1.4.1.25506.2.60.1.5.1 |
hh3cRprDefectReportEntryAn entry in the RPR Defect Report Table. Hh3cRprDefectReportEntry .1.3.6.1.4.1.25506.2.60.1.5.1.1 |
hh3cRprDefectIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.5.1.1.1 |
hh3cRprDefectCurrentStatusIndicates the current status of RPR ring. This attribute is used to notify the management system that alarms generate or clear about some RPR ring.ro Bits .1.3.6.1.4.1.25506.2.60.1.5.1.1.2 |
hh3cRprPriorityMap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.6 |
hh3cRprPriority2ClassMapTableThe Table is for Class Of Service and RPR Service Class Mapping. SEQUENCE OF Hh3cRprPriority2ClassMapEntry .1.3.6.1.4.1.25506.2.60.1.6.1 |
hh3cRprPriority2ClassMapEntryAn entry in the COS to Service Class Map Table. Hh3cRprPriority2ClassMapEntry .1.3.6.1.4.1.25506.2.60.1.6.1.1 |
hh3cRprPriority2ClassMapIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.6.1.1.1 |
hh3cRprPriority2ClassMapTypeThe type of Priority,include tag, mpls, ip. Enumeration .1.3.6.1.4.1.25506.2.60.1.6.1.1.2 |
hh3cRprPriorityValueThe priority of tag,mpls and ip, the value range is 0~7. Enumeration .1.3.6.1.4.1.25506.2.60.1.6.1.1.3 |
hh3cRprPriority2ClassMapThe RPR service class.rw Hh3cRprServiceClass .1.3.6.1.4.1.25506.2.60.1.6.1.1.4 |
hh3cRprRateLimitConfig OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.7 |
hh3cRprRateLimitConfigTableThe RPR Rate Limit Configuration Table that contains the rate limit infomation of RPR serviec class. SEQUENCE OF Hh3cRprRateLimitConfigEntry .1.3.6.1.4.1.25506.2.60.1.7.1 |
hh3cRprRateLimitConfigEntryAn entry in the RPR Rate Limit Configuration Table. Hh3cRprRateLimitConfigEntry .1.3.6.1.4.1.25506.2.60.1.7.1.1 |
hh3cRprRateLimitConfigIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.7.1.1.1 |
hh3cRprRateLimitConfigRingletIdThe identifier of the ring of RPR ringlet. Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.7.1.1.2 |
hh3cRprRateLimitConfigServiceClassThe RPR service class. Hh3cRprServiceClass .1.3.6.1.4.1.25506.2.60.1.7.1.1.3 |
hh3cRprRateLimitConfigValueThe value of rate-limit that configured for diffrent service class. The unit is permillage.rw Integer32 .1.3.6.1.4.1.25506.2.60.1.7.1.1.4 |
hh3cRprMacAddrLearn OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.8 |
hh3cRprMacLearnCfgTableThe RPR MAC Address Table. SEQUENCE OF Hh3cRprMacLearnCfgEntry .1.3.6.1.4.1.25506.2.60.1.8.1 |
hh3cRprMacLearnCfgEntryThe entry of RPR MAC Address Table. Hh3cRprMacLearnCfgEntry .1.3.6.1.4.1.25506.2.60.1.8.1.1 |
hh3cRprMacLearnIfIndexThe ifIndex of RPR interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.8.1.1.1 |
hh3cRprMacLearnRprMacThe MAC address of the RPR station. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.8.1.1.2 |
hh3cRprMacLearnTypeThe type of MAC address item that the user built. The type includes static and dynamic.rw INTEGER .1.3.6.1.4.1.25506.2.60.1.8.1.1.3 |
hh3cRprMacLearnDestMacThe destination of MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.8.1.1.4 |
hh3cRprMacLearnVlanIdThe vlan ID that the MAC address learned from by RPR staion.rw Integer32 .1.3.6.1.4.1.25506.2.60.1.8.1.1.5 |
hh3cRprMacLearnRingletThe identifier of the ring which frames are sent from the source station to the destination station.rw Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.8.1.1.6 |
hh3cRprMacLearnTtlThe hops from source station to destination station on the selected ringlet.ro INTEGER .1.3.6.1.4.1.25506.2.60.1.8.1.1.7 |
hh3cRprMacLearnIsValidThe flag identify whether the configured mac address is valid. If it is true, the configured mac address is valid, otherwise it's invalid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.8.1.1.8 |
hh3cRprMacLearnRowStatusThe status of this table entry. The status includes createAndGo, active and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.8.1.1.9 |
hh3cRprTrapVar OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.9 |
hh3cRprTrapVarTableThe RPR Defect Report Table that contains varible that used to bind in trap. SEQUENCE OF Hh3cRprTrapVarEntry .1.3.6.1.4.1.25506.2.60.1.9.1 |
hh3cRprTrapVarEntryAn entry in the RPR Trap Var Table. Hh3cRprTrapVarEntry .1.3.6.1.4.1.25506.2.60.1.9.1.1 |
hh3cRprTrapIfIndexThe ifIndex of RPR interface. It is only used for trap to bind.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.2.60.1.9.1.1.1 |
hh3cRprTrapRingletThe span of RPR station. It is only used for trap to bind.ro Hh3cRprRingletID .1.3.6.1.4.1.25506.2.60.1.9.1.1.2 |
hh3cRprTrapTopoMacAddressThe MAC address of RPR station. It is only used for trap to bind.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.60.1.9.1.1.3 |
hh3cRprTrapIpAddressThe IP address of RPR station. It is only used for trap to bind.ro InetAddress .1.3.6.1.4.1.25506.2.60.1.9.1.1.4 |
hh3cRprTrap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.60.1.10 |
hh3cRprTopologyOpenRingThe topology openRing trap indicates that the RPR ring is opened. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.1 |
hh3cRprTopologyCloseRingThe topology openRing trap indicates that the RPR ring is closed. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.2 |
hh3cRprTopologyInconsistentThe topology inconsistent trap indicates that the topology of RPR is inconsistent. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.3 |
hh3cRprTopologyInstabilityThe topology instability trap indicates that the topology of RPR is instability. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.4 |
hh3cRprDuplicateMacAddressThe duplicate MAC address trap indicates that the mac address of the station on the ring is dulplicate. That means there is the same MAC address between two stations on the ring. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.5 |
hh3cRprDulplicateIPAddressThe dulplicate IP address trap indicates that the IP address of the station on the ring is dulplicate. That means there is the same IP address between two stations on the ring. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.6 |
hh3cRprIncompleteLRTTThe incomplete LRTT trap indicates that LRTT is not completed. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.7 |
hh3cRprProtecConfigInconsistentThe protection configuration inconsistent trap indicates that the configuration of protection mode on the ring is inconsistent. That is one station is configured steer mode while the other is configured wrap mode. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.8 |
hh3cRprJumboConfigInconsistentThe jumbo configuration inconsistent trap indicates that the configuration of jumbo mode on the ring is inconsistent. That is one station supports jumbo frame while the other doesn't support jumbo frame. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.9 |
hh3cRprExceedMaxReservRateThe exceeded max reserved rate trap indicates that the rate on the ringlet exceeded the max reserved rate. The operator can configure reserved rate for every station, but the sum of all stations' reserved rate of each RPR ringlet can't exceed maximum. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.10 |
hh3cRprExceedMaxStationNumThe exceeded max station number trap indicates that the number of the stations on the ring exceeded the max station number. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.11 |
hh3cRprMiscablingThe miscabling trap indicates that the miscabling event occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.12 |
hh3cRprBackPressureThe back pressure trap indicates that the backpressure is generated on the ringlet. That is the data flow on the ringlet exceeded the range of rate-limit configured. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.13 |
hh3cRprBackPressureOverThe back pressure over trap indicates that the backpressure is disappeared on the ringlet. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.60.1.10.14 |