HH3C-QINQ-MIB
AI MIB Summary
The HH3C-QINQ-MIB enables monitoring and configuration of H3C 802.1Q-in-Q VLAN stacking parameters, including inner and outer VLAN ID mappings, port-based encapsulation states, and associated traffic counters on H3C network switches.
H3C 802.1Q-in-Q MIB
Main OID:
hh3cQINQ.1.3.6.1.4.1.25506.2.69
42
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
42 total| Object Name |
|---|
hh3cQINQH3C 802.1Q-in-Q MIB MODULE-IDENTITY .1.3.6.1.4.1.25506.2.69 |
hh3cQinQMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.69.1 |
hh3cQinQGlobalConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.69.1.1 |
hh3cQinQBpduTunnelSwitchThe global configuration switch of BPDU 802.1q tunnel.
If global configuration is disabled, BPDU tunnel function
will be disabled despite of the corresponding configuration
of interface. BPDU tunnel function of a certain interface
would work only if the global and interface's switch are
both enabled.rw Hh3cQinQSwitchState .1.3.6.1.4.1.25506.2.69.1.1.1 |
hh3cQinQEthernetTypeValueEthernet protocol type configuring for a global value.
The ethernet protocol type is also the TPID(Tag Protocol
Identity) field of a VLAN tag described in 802.1q
document. This value can be also configured for an
individual interface or VLAN. The node that configure
this value for a single interface is hh3cQinQIfEthernetType,
whose priority is higher than hh3cQinQEthernetTypeValue.
That means, if the value configured for a interface is
different from the global value, the switch will select
the configuration of the interface and ignore the global
configuration. The ethernet protocol type of node
hh3cQinQVidEthernetType that configured for a VLAN has
the highest priority.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.1.2 |
hh3cQinQServiceTPIDValueEthernet protocol type configured for service VLAN tags
globally. The ethernet protocol type is also the TPID(Tag
Protocol Identity) field of a VLAN tag described in 802.1q
document. This value can be also configured for an
individual interface. The node that configure this
value for a single interface is hh3cQinQIfServiceTPIDValue,
whose priority is higher than hh3cQinQServiceTPIDValue.
That means, if the value configured for a interface is
different from the global value, the switch will select
the configuration of the interface and ignore the global
configuration.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.1.3 |
hh3cQinQCustomerTPIDValueEthernet protocol type configured for customer VLAN tags
globally. The ethernet protocol type is also the TPID(Tag
Protocol Identity) field of a VLAN tag described in 802.1q
document. This value can be also configured for an
individual interface. The node that configure this
value for a single interface is hh3cQinQIfCustomerTPIDValue,
whose priority is higher than hh3cQinQCustomerTPIDValue.
That means, if the value configured for a interface is
different from the global value, the switch will select
the configuration of the interface and ignore the global
configuration.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.1.4 |
hh3cQinQBpduTunnelTableA table for configuring 802.1q BPDU tunnel function
for interfaces. SEQUENCE OF Hh3cQinQBpduTunnelEntry .1.3.6.1.4.1.25506.2.69.1.2 |
hh3cQinQBpduTunnelEntryAn entry for configuring 802.1q BPDU tunnel function
for interfaces. Hh3cQinQBpduTunnelEntry .1.3.6.1.4.1.25506.2.69.1.2.1 |
hh3cQinQProtocolIndexThe index of protocol on which the BPDU tunnel state
will be set. 'bpdu' represents status of BPDU tunnel.
'stp' represents STP tunnel. 'gmosaic' represents GMOSAIC
tunnel. 'igmp' represents IGMP tunnel. STP/GMOSAIC/IGMP
tunnel will start to work only if BPDU tunnel and
STP/GMOSAIC/IGMP tunnel are both enabled. Enumeration .1.3.6.1.4.1.25506.2.69.1.2.1.1 |
hh3cQinQBpduRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.69.1.2.1.2 |
hh3cQinQPriorityRemarkTableA table for configuring priority field in 802.1Q-in-Q
outer VLAN tag for interfaces. This feature uses the
priority of an inner VLAN tag to remark the priority
of an outer VLAN tag. SEQUENCE OF Hh3cQinQPriorityRemarkEntry .1.3.6.1.4.1.25506.2.69.1.3 |
hh3cQinQPriorityRemarkEntryAn entry for configuring priority remark function for
interfaces. Hh3cQinQPriorityRemarkEntry .1.3.6.1.4.1.25506.2.69.1.3.1 |
hh3cQinQPriorityValueThe priority value in inner VLAN tag. Since the priority
range is from 0 to 7, yet the index range is from 1 to 8.
Thus, the actual priority value equals to the value that
subtracts 1 from corresponding index value. Integer32 .1.3.6.1.4.1.25506.2.69.1.3.1.1 |
hh3cQinQPriorityRemarkValueThe new priority value used to fill outer tag.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.3.1.2 |
hh3cQinQPriorityRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.69.1.3.1.3 |
hh3cQinQVidTableA table for configuring VLAN ID of the 802.1Q-in-Q
interfaces. SEQUENCE OF Hh3cQinQVidEntry .1.3.6.1.4.1.25506.2.69.1.4 |
hh3cQinQVidEntryAn entry for configuring VLAN ID of the 802.1Q-in-Q
interfaces. Hh3cQinQVidEntry .1.3.6.1.4.1.25506.2.69.1.4.1 |
hh3cQinQVlanIDVLAN ID Integer32 .1.3.6.1.4.1.25506.2.69.1.4.1.1 |
hh3cQinQInboundVidListLowThe inbound VLAN IDs which need 802.1Q-in-Q processing.
The VLAN ID range, described by bitmap, is from 1 to
2048. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs, with
the first octet specifying VLANs 1 through 8, the second
octet specifying VLANs 9 through 16, etc. Within each
octet, the most significant bit represents the highest
numbered VLAN, and the least significant bit represents
the lowest numbered VLAN.rw OCTET STRING .1.3.6.1.4.1.25506.2.69.1.4.1.2 |
hh3cQinQInboundVidListHighThe inbound VLAN IDs which need 802.1Q-in-Q processing.
The VLAN ID range, described by bitmap, is from 2049 to
4094. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs, with
the first octet specifying VLANs 2049 through 2056, the
second octet specifying VLANs 2057 through 2064, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN.rw OCTET STRING .1.3.6.1.4.1.25506.2.69.1.4.1.3 |
hh3cQinQVidEthernetTypeEthernet protocol type configuring for a VLAN.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.4.1.4 |
hh3cQinQVidRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.69.1.4.1.5 |
hh3cQinQVidSwapTableA table for configuring 802.1Q-in-Q inner VLAN ID
swapping function for interfaces. SEQUENCE OF Hh3cQinQVidSwapEntry .1.3.6.1.4.1.25506.2.69.1.5 |
hh3cQinQVidSwapEntryAn entry for configuring 802.1Q-in-Q inner VLAN ID
swapping function for interfaces. Hh3cQinQVidSwapEntry .1.3.6.1.4.1.25506.2.69.1.5.1 |
hh3cQinQVidSwapOldThe old VLAN ID of original 802.1Q packets. Integer32 .1.3.6.1.4.1.25506.2.69.1.5.1.1 |
hh3cQinQVidSwapNewThe new VLAN ID of original 802.1Q packets.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.5.1.2 |
hh3cQinQVidSwapRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.69.1.5.1.3 |
hh3cQinQPrioritySwapTableA table for configuring 802.1Q-in-Q inner VLAN priority
swapping function for interfaces. Using this function,
the priority of inner VLAN tag can be modified. SEQUENCE OF Hh3cQinQPrioritySwapEntry .1.3.6.1.4.1.25506.2.69.1.6 |
hh3cQinQPrioritySwapEntryAn entry for configuring 802.1Q-in-Q inner VLAN
priority swapping function for interfaces. Hh3cQinQPrioritySwapEntry .1.3.6.1.4.1.25506.2.69.1.6.1 |
hh3cQinQPrioritySwapOldThe old priority of original 802.1Q packets. It is the
priority of inner VLAN tag. Since the VLAN priority range
is from 0 to 7, yet the index range is from 1 to 8. Thus,
the actual priority value equals to the value that
subtracts 1 from corresponding index value. Integer32 .1.3.6.1.4.1.25506.2.69.1.6.1.1 |
hh3cQinQPrioritySwapNewThe new priority of original 802.1Q packets. It is the
priority of inner VLAN tag after swapped.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.6.1.2 |
hh3cQinQPrioritySwapRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.69.1.6.1.3 |
hh3cQinQIfConfigTableA table for configuring 802.1Q-in-Q functions for
interfaces. SEQUENCE OF Hh3cQinQIfConfigEntry .1.3.6.1.4.1.25506.2.69.1.7 |
hh3cQinQIfConfigEntryAn entry for configuring 802.1Q-in-Q functions for
interfaces. Hh3cQinQIfConfigEntry .1.3.6.1.4.1.25506.2.69.1.7.1 |
hh3cQinQIfEthernetTypeEthernet protocol type configuring for an interface.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.7.1.1 |
hh3cQinQIfSwitchSwitch of 802.1Q-in-Q functions configuring for an
interface.rw Hh3cQinQSwitchState .1.3.6.1.4.1.25506.2.69.1.7.1.2 |
hh3cQinQIfRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.69.1.7.1.3 |
hh3cQinQIfServiceTPIDValueService TPID value configured for an interface.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.7.1.4 |
hh3cQinQIfCustomerTPIDValueCustomer TPID value configured for an interface.rw Integer32 .1.3.6.1.4.1.25506.2.69.1.7.1.5 |
hh3cQinQIfUplinkSwitchSwitch of the uplink 802.1Q-in-Q function
for an interface.rw Hh3cQinQSwitchState .1.3.6.1.4.1.25506.2.69.1.7.1.6 |
hh3cQinQIfDownlinkSwitchSwitch of the downlink 802.1Q-in-Q function
for an interface.rw Hh3cQinQSwitchState .1.3.6.1.4.1.25506.2.69.1.7.1.7 |