HH3C-PROT-PRIORITY-MIB
Imported Objects
Objects
9 total| Object Name |
|---|
hh3cProtocolPriorityThis MIB is used to manage and configure the priority of specified protocol. This MIB is applicable to routers, switches and other products. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.37 |
hh3cProtocolPriorityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.37.1 |
hh3cPPri OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.37.1.1 |
hh3cProtocolPriorityTableA table is used to configure the priority of the protocol. SEQUENCE OF Hh3cProtocolPriorityEntry .1.3.6.1.4.1.25506.2.37.1.1.1 |
hh3cProtocolPriorityEntryAn entry containing information about the priority of the protocol. Hh3cProtocolPriorityEntry .1.3.6.1.4.1.25506.2.37.1.1.1.1 |
hh3cPPriProtocolTypeProtocol type. Enumeration .1.3.6.1.4.1.25506.2.37.1.1.1.1.1 |
hh3cPPriPriorityTypePriority type.rw Enumeration .1.3.6.1.4.1.25506.2.37.1.1.1.1.2 |
hh3cPPriPriorityVlauePriority value. If setting hh3cPPriPriorityType to ip-precedence(1), the range of hh3cPPriPriorityVlaue is from 0 to 7. If setting hh3cPPriPriorityType to dscp(2), the range of hh3cPPriPriorityVlaue is from 0 to 63.rw Integer32 .1.3.6.1.4.1.25506.2.37.1.1.1.1.3 |
hh3cPPriRowStatusRowStatus, Now support createAndGo,active and destroy. To create a new row, hh3cPPriPriorityType and hh3cPPriPriorityValue must be specified. To modify a row,hh3cPPriPriorityType and hh3cPPriPriorityValue must change at the same time and the hh3cPPriRowStatus is active .rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.37.1.1.1.1.4 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →SNMP MIB module
SNMP MIB module
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
SNMP MIB module