HH3C-PPP-OVER-SONET-MIB
AI MIB Summary
The HH3C-PPP-OVER-SONET-MIB monitors and configures operational parameters and alarm states for Huawei/H3C POS (Packet over SONET) interfaces, specifically managing PPP encapsulation settings over SONET physical links.
This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.
Main OID:
hh3cPos.1.3.6.1.4.1.25506.2.19
51
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
hh3cPosThis MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.19 |
hh3cPosMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.19.1 |
hh3cPosParamTableThe pos parameter table. SEQUENCE OF Hh3cPosParamTableEntry .1.3.6.1.4.1.25506.2.19.1.1 |
hh3cPosParamTableEntryThe entry of pos table. Hh3cPosParamTableEntry .1.3.6.1.4.1.25506.2.19.1.1.1 |
hh3cPosCRCThe length of CRCrw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.1 |
hh3cPosMTUMaximum Transfer Unit (MTU) of POS interfacerw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.2 |
hh3cPosScrambleScrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.19.1.1.1.3 |
hh3cPosClockSourceThe value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remoterw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.4 |
hh3cPosSdhFlagJ0The section trace byte. This node is used when the frame type is sdh.rw DisplayString .1.3.6.1.4.1.25506.2.19.1.1.1.5 |
hh3cPosSdhFlagJ1The path trace byte. This node is used when the frame type is sdh.rw DisplayString .1.3.6.1.4.1.25506.2.19.1.1.1.6 |
hh3cPosSonetFlagJ0The section trace byte. This node is used when the frame type is sonet.rw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.7 |
hh3cPosSonetFlagJ1The path trace byte. This node is used when the frame type is sonet.rw DisplayString .1.3.6.1.4.1.25506.2.19.1.1.1.8 |
hh3cPosFlagC2The parameter for the channel signal value of C2 byterw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.9 |
hh3cPosFrameTypeThe frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network).rw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.10 |
hh3cPosBindVlanIdThe vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos.rw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.11 |
hh3cPosEncapsulationThe type of encapsulationrw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.12 |
hh3cPoskeepaliveTimeoutThe keeplive of ppp, hdlc or fr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link.rw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.13 |
hh3cPosBERthresholdSFThe bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold.rw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.14 |
hh3cPosBERthresholdSDThe bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold.rw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.15 |
hh3cPosB1ErrorCounter for SBIPE(Section Bit Interleave Parity Error)ro Counter64 .1.3.6.1.4.1.25506.2.19.1.1.1.16 |
hh3cPosB2ErrorCounter for LBIPE(Line Bit Interleave Parity Error)ro Counter64 .1.3.6.1.4.1.25506.2.19.1.1.1.17 |
hh3cPosB3ErrorCounter for PBIPE(Path Bit Interleave Parity Error)ro Counter64 .1.3.6.1.4.1.25506.2.19.1.1.1.18 |
hh3cPosM1ErrorHow many times does LREI(Line Remote Error Indication) occurro Counter64 .1.3.6.1.4.1.25506.2.19.1.1.1.19 |
hh3cPosG1ErrorHow many times does PREI(Path Remote Error Indication) occurro Counter64 .1.3.6.1.4.1.25506.2.19.1.1.1.20 |
hh3cPosFlagJ0TypeThe frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.rw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.21 |
hh3cPosFlagJ1TypeThe frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.rw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.22 |
hh3cPosB1TCAThresholdThreshold for B1 TCA.rw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.23 |
hh3cPosB2TCAThresholdThreshold for B2 TCA.rw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.24 |
hh3cPosB3TCAThresholdThreshold for B3 TCA.rw Integer32 .1.3.6.1.4.1.25506.2.19.1.1.1.25 |
hh3cPosB1TCAEnableEnable traps of B1 TCA.rw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.26 |
hh3cPosB2TCAEnableEnable traps of B2 TCA.rw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.27 |
hh3cPosB3TCAEnableEnable traps of B3 TCA.rw Enumeration .1.3.6.1.4.1.25506.2.19.1.1.1.28 |
hh3cPosMIBNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.19.2 |
hh3cPosMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.19.2.0 |
hh3cPosLOSAlarmAlarm indicates loss of signal NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.1 |
hh3cPosLOFAlarmAlarm indicates loss of frame NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.2 |
hh3cPosOOFAlarmAlarm indicates out of frame NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.3 |
hh3cPosLAISAlarmAlarm when LAIS(Line Alarm Indication Signal) arrives NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.4 |
hh3cPosLRDIAlarmAlarm when LRDI(Line Remote Defect Indication) arrives NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.5 |
hh3cPosPRDIAlarmAlarm when PRDI(Path Remote Defect Indication) arrives NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.6 |
hh3cPosPAISAlarmAlarm when PAIS(Path Alarm Indication Signal) arrives NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.7 |
hh3cPosLOPAlarmAlarm indicates loss of pointer NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.8 |
hh3cPosSTIMAlarmAlarm indicates inconsistency between sent and received J0 bytes. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.9 |
hh3cPosPTIMAlarmAlarm indicates inconsistency between sent and received J1 bytes. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.10 |
hh3cPosPSLMAlarmAlarm indicates a mismatched C2 byte. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.11 |
hh3cPosLSDAlarmAlarm indicates that the B2 bit-error rate exceeds SD threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.12 |
hh3cPosLSFAlarmAlarm indicates that the B2 bit-error rate exceeds SF threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.13 |
hh3cPosNormalAlarmAlarm indicates that the Pos interface state returns normal. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.14 |
hh3cPosB1TCAlarmThreshold crossing alarms for B1. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.15 |
hh3cPosB2TCAlarmThreshold crossing alarms for B2. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.16 |
hh3cPosB3TCAlarmThreshold crossing alarms for B3. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.19.2.0.17 |