HH3C-POS-MIB
AI MIB Summary
The HH3C-POS-MIB module provides management and monitoring capabilities for Huawei/H3C Packet over SONET/SDH (POS) interfaces, exposing critical operational metrics such as interface status, error counters, and throughput statistics to facilitate link performance analysis and fault isolation.
The POS MIB module is used to manage POS-Access.
Main OID:
hh3cpos.1.3.6.1.4.1.25506.8.36.8
80
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
80 total| Object Name |
|---|
hh3cposThe POS MIB module is used to manage POS-Access. MODULE-IDENTITY .1.3.6.1.4.1.25506.8.36.8 |
hh3cposAppTableThe table to get and set the application informatin. SEQUENCE OF Hh3cPOSAppEntry .1.3.6.1.4.1.25506.8.36.8.1 |
hh3cposAppEntryThe content of hh3cposAppTable. Hh3cPOSAppEntry .1.3.6.1.4.1.25506.8.36.8.1.1 |
hh3cposAppIdThe ID of application.ro INTEGER .1.3.6.1.4.1.25506.8.36.8.1.1.1 |
hh3cposAppConnectModeThe connect mode of application. If the router and unix are connected by TCP protocol, the connect mode of application is tcp. If the router and unix are connected by async interface, the connect mode of application is flow. If the router is used as POSPAD device, the connect mode of application is pad.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.1.1.2 |
hh3cposAppStateThe state of application.ro Enumeration .1.3.6.1.4.1.25506.8.36.8.1.1.3 |
hh3cposAppIfIndexThe interface index of the application whose connect mode is flow or pad.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.1.1.4 |
hh3cposAppHostIPThe destination IP Address of application. Used for the application whose connect mode is tcp.rw IpAddress .1.3.6.1.4.1.25506.8.36.8.1.1.5 |
hh3cposAppPortThe destination port of application. Used for the application whose connect mode is tcp.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.1.1.6 |
hh3cposAppSourceIpThe source IP Address of application. Used for the application whose connect mode is tcp.rw IpAddress .1.3.6.1.4.1.25506.8.36.8.1.1.7 |
hh3cposAppRecvPacCounterThe number of packets received by the application.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.1.1.8 |
hh3cposAppErrPacCounterThe number of error packets received by the application.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.1.1.9 |
hh3cposAppDistrErrCounterThe number of packets that could not be sent to POS.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.1.1.10 |
hh3cposAppBuffedCounterThe number of packets stored in the buffer of application.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.1.1.11 |
hh3cposAppDiscardedCounterThe number of packets discarded by the application.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.1.1.12 |
hh3cposAppDebugThe debugging switch of application.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.1.1.13 |
hh3cposAppRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.8.1.1.14 |
hh3cposAppX121AddrThe destination X121 Address of application which is an octet string made up of numeric. Used for the application whose connect mode is pad.rw OCTET STRING .1.3.6.1.4.1.25506.8.36.8.1.1.15 |
hh3cposInterTableThe table to get and set the POS-Interface informatin. SEQUENCE OF Hh3cPOSInterEntry .1.3.6.1.4.1.25506.8.36.8.2 |
hh3cposInterEntryThe content of hh3cposInterTable. Hh3cPOSInterEntry .1.3.6.1.4.1.25506.8.36.8.2.1 |
hh3cposPosIdThe ID of the POS-Interface.ro INTEGER .1.3.6.1.4.1.25506.8.36.8.2.1.1 |
hh3cposPosIfIndexThe interface index of the POS-Interface whose type is fcm, asy or pad-client.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.2.1.2 |
hh3cposPosConnectStateThe state of the POS-Interface.ro Enumeration .1.3.6.1.4.1.25506.8.36.8.2.1.3 |
hh3cposPosRecvPacCounterThe number of packets received by the POS-Interface.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.2.1.4 |
hh3cposPosErrPacCounterThe number of error packets received by the POS-Interface.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.2.1.5 |
hh3cposPosMapErrCounterThe number of packets that could not be sent to application.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.2.1.6 |
hh3cposPosBuffedCounterThe number of packets stored in the buffer of the POS-Interface.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.2.1.7 |
hh3cposPosDiscardedCounterThe number of packets discarded by the POS-Interface.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.2.1.8 |
hh3cposPosInterDebugThe debugging switch of the POS-Interface.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.2.1.9 |
hh3cposPosInterRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.8.2.1.10 |
hh3cposPosInterTypeThe type of interface. The POS-Access mode has four types: FCM-Access, ASYNC-Access, simulating POSPAD device, POSPAD-Access. FCM-Access mode means POS and router are connected through PSTN. In this case, hh3cposPosInterType should be set to fcm. ASYNC-Access mode means POS and router are connected by asynchronous cable. In this case, hh3cposPosInterType should be set to asy. Simulating POSPAD device means router connects POS through asynchronous cable and connects another router whose connect mode is pad-server through X.25 network. In this case, hh3cposPosInterType should be set to pad-client. POSPAD-Access mode means router connects POSPAD device through X.25 network. In this case, hh3cposPosInterType is pad-server. The hh3cposPosInterType can't be set to pad-server. It is autogenerated when POSPAD device initiates a connection to the router.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.2.1.11 |
hh3cposMapTableThe table to get and set the informatin of mapping relation of destination and application. SEQUENCE OF Hh3cPOSMapEntry .1.3.6.1.4.1.25506.8.36.8.3 |
hh3cposMapEntryThe content of hh3cposMapTable. Hh3cPOSMapEntry .1.3.6.1.4.1.25506.8.36.8.3.1 |
hh3cposMapDesThe destination code of the mapping item. If the value is -1, it is the default item of mapping relation.rw INTEGER(-1..65535) .1.3.6.1.4.1.25506.8.36.8.3.1.1 |
hh3cposMapAppNumberThe application index of the mapping item.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.3.1.2 |
hh3cposMapRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.8.3.1.3 |
hh3cposAsyAppTableThe table to get and set the asynchronous-application interface information. SEQUENCE OF Hh3cPOSAsyAppEntry .1.3.6.1.4.1.25506.8.36.8.4 |
hh3cposAsyAppEntryThe content of hh3cposAsyAppTable. Hh3cPOSAsyAppEntry .1.3.6.1.4.1.25506.8.36.8.4.1 |
hh3cposAsyAppIfIndexThe interface index of asynchronous-application.ro INTEGER .1.3.6.1.4.1.25506.8.36.8.4.1.1 |
hh3cposAsyAppRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.8.4.1.2 |
hh3cposFCMTableThe table to get the information of FCM interface. SEQUENCE OF Hh3cPOSFCMEntry .1.3.6.1.4.1.25506.8.36.8.5 |
hh3cposFCMEntryThe content of hh3cposFCMTable. Hh3cPOSFCMEntry .1.3.6.1.4.1.25506.8.36.8.5.1 |
hh3cposFCMIfIndexThe index of FCM interface.ro INTEGER .1.3.6.1.4.1.25506.8.36.8.5.1.1 |
hh3cposFCMTimeoutCounterThe number that modem was hung up for timeout.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.5.1.3 |
hh3cposFCMConnectFailCounterThe number that modem could not handshake successfully.ro Counter32 .1.3.6.1.4.1.25506.8.36.8.5.1.4 |
hh3cposAppSumThe total of configued applications.ro INTEGER .1.3.6.1.4.1.25506.8.36.8.6 |
hh3cposInterSumThe total of configued POS-Interfaces.ro INTEGER .1.3.6.1.4.1.25506.8.36.8.7 |
hh3cposEnableTo enable or diable pos-server.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.8 |
hh3cposAppDebugAllTo open or close the debugging switch of all applications.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.9 |
hh3cposPosDebugAllTo open or close the debugging switch of all POS-Interfaces.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.10 |
hh3cposClearPacCounterTo reset all packet counters of all applicaions and POS-Interfaces.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.11 |
hh3cposClearFCMCounterTo clear all counters of all FCM interfaces.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.12 |
hh3cposEnableTrapTo enable or disable trap switch.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.13 |
hh3cposFCMAnswerTimeFCM answer time, unit:ms.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.14 |
hh3cposFCMTradeTimeFCM trade time, unit:ms.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.15 |
hh3cposFCMPacketIntervalFCM packet interval time, unit:ms.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.16 |
hh3cposTrap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.36.8.17 |
hh3cposAppNotReadyTrapThe agent will send a trap when the application whose state is linked isn't ready to send or receive data. Only used for the application whose connect mode is tcp. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.1 |
hh3cposAppConnectFailTrapThe agent will send a trap if router can not connect to the application. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.2 |
hh3cposAppStateChangeTrapThe agent will send a trap when the state of the application is changed to down or kept. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.3 |
hh3cposAppNotConfigedTrapThe agent will send a trap if the application isn't configured. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.4 |
hh3cposAppBuffOverFlowTrapThe agent will send a trap if the application buffer is overflowed. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.5 |
hh3cposAppDebugOpenTrapThe agent will send a trap if the debugging switch of application is open. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.6 |
hh3cposAppDebugAllOpenTrapThe agent will send a trap if the all debugging switches of application are open. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.7 |
hh3cposInterBuffOverFlowTrapThe agent will send a trap if the distributing buffer is overflowed. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.8 |
hh3cposInterStateChangeTrapThe agent will send a trap if the state of POS-Interface is changed to down. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.9 |
hh3cposInterDebugOpenTrapThe agent will send a trap if the debug of POS-Interface is open. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.10 |
hh3cposInterDebugAllOpenTrapThe agent will send a trap if the all debugs of POS-Interface are open. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.11 |
hh3cposFCMTimeoutTrapThe agent will send a trap if the modem is hung up for timeout. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.12 |
hh3cposFCMConnectFailTrapThe agent will send a trap if the handshaking of modems is not successful. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.13 |
hh3cposClearPacketCounterThe agent will send a trap when the packet counter of the POS application and interface is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.14 |
hh3cposClearFcmCounterThe agent will send a trap when the FCM counter is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.8.17.15 |
hh3cposPadWaitTimeThe time that POS-Interface needs to wait to receive another packet, unit:ms. It may be configured when router is used as POSPAD device. In other cases, It is useless.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.18 |
hh3cposPadIdleTimeoutIf these is no packet transmitting through the time, the connection of POSPAD device and router whose connect mode is pad-server will be cut off. Unit:s.rw INTEGER .1.3.6.1.4.1.25506.8.36.8.19 |
hh3cposPadPacTypeThe type of packet.Between POSPAD device and router whose connect mode is pad-server, there are two types of packet. One is synchronous, the other is asynchronous.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.20 |
hh3cposPadCheckSCharTo enable or disable the checking of 10 04 characters in packet. It is used for the router which is used as POSPAD device. When the value is disable, it will check packet that just includes 10 04 charaters. If there are 10 04 packet, the router which is used as POSPAD device will disconnect from POSPAD-access router. When the value is enable, it will check 10 04 characters in packet. If there are 10 04 characters in packet, the router which is used as POSPAD device will disconnect from POSPAD-access router.rw Enumeration .1.3.6.1.4.1.25506.8.36.8.21 |
hh3cposPadTableThe table to enable or disable POSPAD-Access function under serial interface. SEQUENCE OF Hh3cPOSPadEntry .1.3.6.1.4.1.25506.8.36.8.22 |
hh3cposPadEntryThe content of hh3cposPadTable. Hh3cPOSPadEntry .1.3.6.1.4.1.25506.8.36.8.22.1 |
hh3cposPadIfIndexThe index of serial interface. INTEGER .1.3.6.1.4.1.25506.8.36.8.22.1.1 |
hh3cposPadRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.8.22.1.2 |