HH3C-LswMix-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HH3C-LswMix-MIB.
14
Objects
Active
Status
1
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
hh3c OBJECT IDENTIFIER .1.3.6.1.4.1.25506 |
hh3cRhw OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8 |
hh3clswCommon OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35 |
hh3cLswMix OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.17 |
hh3cLswLastSwitchDateThis object indicates the date of the most recent change to the mpu(Main Processing Unit).ro INTEGER .1.3.6.1.4.1.25506.8.35.17.1 |
hh3cLswLastSwitchTimeThis object indicates the time of the most recent change to the mpu.ro INTEGER .1.3.6.1.4.1.25506.8.35.17.2 |
hh3cLswMpuSwitchsNumThis object indicates the total times of the mpu switched since the system start up.ro INTEGER .1.3.6.1.4.1.25506.8.35.17.3 |
hh3cLswMpuSwitchSetting this object will immediately switch the standby mpu to master mpu. Read is not supported.ro Enumeration .1.3.6.1.4.1.25506.8.35.17.4 |
hh3cLswXSlotTableThe source main table.ro SEQUENCE OF Hh3cLswXSlotEntry .1.3.6.1.4.1.25506.8.35.17.5 |
hh3cLswXSlotEntryAn entry in the source main table.ro Hh3cLswXSlotEntry .1.3.6.1.4.1.25506.8.35.17.5.1 |
hh3cLswMainCardBoardStatusThe value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state of lpu(Line Processing Unit)ro Enumeration .1.3.6.1.4.1.25506.8.35.17.5.1.1 |
hh3cLswCrossBarStatusThe value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode.ro Enumeration .1.3.6.1.4.1.25506.8.35.17.5.1.2 |
hh3csMixTrapMib OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.17.10 |
hh3cSlaveSwitchOverAn hh3cSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.17.10.0.1 |