HH3C-LOGIC-VOLUME-MIB
This MIB describes the general information of disk device.
Main OID:
hh3cLogicVolume.1.3.6.1.4.1.25506.10.5
82
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
hh3cLogicVolumeThis MIB describes the general information of disk device. MODULE-IDENTITY .1.3.6.1.4.1.25506.10.5 |
hh3cLvMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.5.1 |
hh3cLogicResourceCapacityObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.5.1.1 |
hh3cLvCountThis object identifies the maximal number of logic volumes supported.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.1.1 |
hh3cLvMaxSizeThis object identifies the maximal size of logic volumes supported.ro Integer32 UNITS "TB" .1.3.6.1.4.1.25506.10.5.1.1.2 |
hh3cTargetCountThis object identifies the maximal number of targets supported.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.1.3 |
hh3cInitiatorCountThis object identifies the maximal number of initiators supported.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.1.4 |
hh3cSanClientCountThis object identifies the maximal number of SAN client supported.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.1.5 |
hh3cLogicVolumeResource OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.5.1.2 |
hh3cLvCreateIndexThis object supplys an valid index which uses to create a new entry for the hh3cLvTable object. Reference to hh3cLvRowStatus object for more information. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.ro Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.2.1 |
hh3cLvTableThis table describes the logic resource information of a logic volume. SEQUENCE OF Hh3cLvEntry .1.3.6.1.4.1.25506.10.5.1.2.2 |
hh3cLvEntryAn entry containing management information applicable to a particular logic resource. Hh3cLvEntry .1.3.6.1.4.1.25506.10.5.1.2.2.1 |
hh3cLvIndexThis object describes the symbol of a logic volume. Hh3cLvIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.2.2.1.1 |
hh3cLvNameThis object identifies the name of a logic volume.rw OCTET STRING .1.3.6.1.4.1.25506.10.5.1.2.2.1.2 |
hh3cLvTotalSizeThis object describes the total size of a logic volume. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.5.1.2.2.1.3 |
hh3cLvCreateRaidUuidThis object describes the ID of array where a logic volume build on.rw Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.2.2.1.4 |
hh3cLvCreateRaidSizeThis object describes the size of a logic volume when create it. The units is million bytes.rw Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.5.1.2.2.1.5 |
hh3cLvSedInquiryStringKeepThis object identifies if the inquiry string of the logic volume should be reserved. This value of this object is valid only when the associated hh3cLvType is equal to 'serviceEnabled'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.2.2.1.6 |
hh3cLvSedRaidUuidThis object describes the location where the SED infomation is build on.ro Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.2.2.1.7 |
hh3cLvStateThis object identifies the state of a logic volume. The value 'conflict' means the names of two or more logic volume are reduplicate.ro Enumeration .1.3.6.1.4.1.25506.10.5.1.2.2.1.8 |
hh3cLvAssignedThis object identifies if the logic volume has be designated for target or SAN client.ro Enumeration .1.3.6.1.4.1.25506.10.5.1.2.2.1.9 |
hh3cLvTypeThis object describes the type of a logic volume. The value 'virtual' means virtual devices are defined as sets of storage blocks from one or more physical array. This allows the creation of virtual devices that can be a portion of a larger physical array, or an aggregation of multiple physical array. The value 'direct' means direct devices are directly mapped SCSI devices. Because they are not virtualized, direct devices cannot take advantage of advanced storage options, such as mirroring, failover, replication, or snapshot copy. The value 'serviceEnabled' means service enabled devices are all maintained in a one-to-one mapping relationship(one physical array equals one logical device).ro Enumeration .1.3.6.1.4.1.25506.10.5.1.2.2.1.10 |
hh3cLvExtendTimesThis object describes the times the logic volume has been extended.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.2.2.1.11 |
hh3cLvRowStatusThis object describes the actions to create or delete a logic volume.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.2.2.1.12 |
hh3cLvExtTableThis table contains the extend resource information of the logic volume. SEQUENCE OF Hh3cLvExtEntry .1.3.6.1.4.1.25506.10.5.1.3 |
hh3cLvExtEntryAn entry containing management information applicable to extend resource of logic volume. Hh3cLvExtEntry .1.3.6.1.4.1.25506.10.5.1.3.1 |
hh3cLvRaidUuidThis index is identical to hh3cRaidUuid in HH3C-RAID-MIB. Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.3.1.1 |
hh3cLvExtSizeThis object describes the extend size of the logic volume in a specific raid. The units is million bytes. This object will always return zero when read.rw Integer32 .1.3.6.1.4.1.25506.10.5.1.3.1.2 |
hh3cLvRaidSizeThis object describes the size of logic volume on the specific raid. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.5.1.3.1.3 |
hh3cLvExtRowStatusThis object describes the action to extend the logic volume.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.3.1.4 |
hh3cTargetResource OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.5.1.4 |
hh3cTargetCreateIndexThis object supplys an valid index which uses to create a new entry for the hh3cTargetTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.4.1 |
hh3cTargetTableThis table describes some information when creating a target. SEQUENCE OF Hh3cTargetEntry .1.3.6.1.4.1.25506.10.5.1.4.2 |
hh3cTargetEntryAn entry containing management information applicable to a target when create it. Hh3cTargetEntry .1.3.6.1.4.1.25506.10.5.1.4.2.1 |
hh3cTargetIdThis object identifies the ID of a target. Integer32 .1.3.6.1.4.1.25506.10.5.1.4.2.1.1 |
hh3cTargetNameThis object describes the name of a target.rw OCTET STRING .1.3.6.1.4.1.25506.10.5.1.4.2.1.2 |
hh3cTargetMinLunThis object describes the mini LUN(logical unit number) number of a target.rw Integer32 .1.3.6.1.4.1.25506.10.5.1.4.2.1.3 |
hh3cTargetRowStatusThis object describes the actions to add or delete the target.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.4.2.1.4 |
hh3cTargetAddressTableThis table described some address information of a target. SEQUENCE OF Hh3cTargetAddressEntry .1.3.6.1.4.1.25506.10.5.1.5 |
hh3cTargetAddressEntryAn entry containing management information applicable to the address of a target. Hh3cTargetAddressEntry .1.3.6.1.4.1.25506.10.5.1.5.1 |
hh3cTargetIpAddressThis object describes the IP address of a target. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.10.5.1.5.1.1 |
hh3cTargetIpAddrTypeThis object describes the type of IP address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.10.5.1.5.1.2 |
hh3cTargetIpRowStatusThis object describes the actions to add or delete a IP address of a target.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.5.1.3 |
hh3cTargetLvAssignTableThis table describes logic resource information of a target. SEQUENCE OF Hh3cTargetLvAssignEntry .1.3.6.1.4.1.25506.10.5.1.6 |
hh3cTargetLvAssignEntryAn entry containing management information applicable to the logic resource of a target. Hh3cTargetLvAssignEntry .1.3.6.1.4.1.25506.10.5.1.6.1 |
hh3cTargetLvLunThis object identifies the init LUN number of a target.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.6.1.1 |
hh3cTargetLvRowStatusThis object describes the actions to add or delete the logic resource of a target.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.6.1.2 |
hh3cInitiatorResource OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.5.1.7 |
hh3cInitiatorCreateIndexThis object supplys an valid index which uses to create a new entry for the hh3cInitiatorTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.7.1 |
hh3cInitiatorTableThis table describes the creation information of initiators. SEQUENCE OF Hh3cInitiatorEntry .1.3.6.1.4.1.25506.10.5.1.7.2 |
hh3cInitiatorEntryAn entry containing management information applicable to the creation of initiator. Hh3cInitiatorEntry .1.3.6.1.4.1.25506.10.5.1.7.2.1 |
hh3cInitiatorIdThis object identifies the ID of the initiator. Integer32 .1.3.6.1.4.1.25506.10.5.1.7.2.1.1 |
hh3cInitiatorNameThis object describes the name of the initiator.rw OCTET STRING .1.3.6.1.4.1.25506.10.5.1.7.2.1.2 |
hh3cInitiatorRowStatusThis object describes the actions to add or delete initiators.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.7.2.1.3 |
hh3cTargetInitiatorAssociateTableThis table describes the associate information between the target and initiator. SEQUENCE OF Hh3cTargetInitiatorAssociateEntry .1.3.6.1.4.1.25506.10.5.1.8 |
hh3cTargetInitiatorAssociateEntryAn entry containing management information applicable to association between the target and initiator. Hh3cTargetInitiatorAssociateEntry .1.3.6.1.4.1.25506.10.5.1.8.1 |
hh3cTIAccessModeThis object identifies the mode of accessing between the target and initiator. The value 'read' means read available. The value 'write' means read/write available, and write available only for one association. The value 'nonexclusive' means read/write available for multi-association.rw Enumeration .1.3.6.1.4.1.25506.10.5.1.8.1.1 |
hh3cTIChapThis object identifies the state of the chap attestation.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.8.1.2 |
hh3cTIUserNameThis object identifies the user name for the chap attestation.rw OCTET STRING .1.3.6.1.4.1.25506.10.5.1.8.1.3 |
hh3cTIPasswordThis object identifies the password for the chap attestation. It is proclaimed and can be modified.rw OCTET STRING .1.3.6.1.4.1.25506.10.5.1.8.1.4 |
hh3cTIRowStatusThis object describes the actions to add or delete the association.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.8.1.5 |
hh3cTISessionTableThis table described the information of the sessions. SEQUENCE OF Hh3cTISessionEntry .1.3.6.1.4.1.25506.10.5.1.9 |
hh3cTISessionEntryAn entry containing management information applicable to the sessions. Hh3cTISessionEntry .1.3.6.1.4.1.25506.10.5.1.9.1 |
hh3cTISessionIdThis object identifies the ID of a session. Hh3cSessionIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.9.1.1 |
hh3cTISessionConnectionCountThis object describes the number of connections between the targets and initiators.ro Counter32 .1.3.6.1.4.1.25506.10.5.1.9.1.2 |
hh3cTISessionInitiatorNameThis object identifies the initiator's name of a session.ro OCTET STRING .1.3.6.1.4.1.25506.10.5.1.9.1.3 |
hh3cSanClientResource OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.5.1.10 |
hh3cSanClientCreateIndexThis object supplys an valid index which uses to create a new entry for the hh3cSanClientTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.10.1 |
hh3cSanClientTableThis table described the information of SAN(Storage Area Network) clients. SEQUENCE OF Hh3cSanClientEntry .1.3.6.1.4.1.25506.10.5.1.10.2 |
hh3cSanClientEntryAn entry containing management information applicable to the SAN clients. Hh3cSanClientEntry .1.3.6.1.4.1.25506.10.5.1.10.2.1 |
hh3cSanClientIdThis object identifies the index of a SAN client. Integer32 .1.3.6.1.4.1.25506.10.5.1.10.2.1.1 |
hh3cSanClientNameThis object identifies the name of a SAN client.rw OCTET STRING .1.3.6.1.4.1.25506.10.5.1.10.2.1.2 |
hh3cSanClientTypeThis object identifies the type of a SAN client.rw Enumeration .1.3.6.1.4.1.25506.10.5.1.10.2.1.3 |
hh3cFcInitiatorWwpnListThis object identifies the name list of FC Initiator WWPN(World Wide Port Name). The value of this object is invalid and should be ignored when the value of associated hh3cSanClientType object is not equal to 'fc'.rw Hh3cWwpnListType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.10.2.1.4 |
hh3cFcAccessModeThis object identifies the mode of access. The value of this object is invalid and should be ignored when the value of associated hh3cSanClientType object is not equal to 'fc'. The value 'read' means read available. The value 'write' means read/write available, and write available only for one association. The value 'nonexclusive' means read/write available for multi-association.rw Enumeration .1.3.6.1.4.1.25506.10.5.1.10.2.1.6 |
hh3cSanClientRowStatusThis object describes the action to create or delete a SAN client.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.10.2.1.7 |
hh3cFcLogicResourceTableThis table describes logic resource information of a FC. SEQUENCE OF Hh3cFcLogicResourceEntry .1.3.6.1.4.1.25506.10.5.1.11 |
hh3cFcLogicResourceEntryAn entry containing management information applicable to the logic resource of a FC. Hh3cFcLogicResourceEntry .1.3.6.1.4.1.25506.10.5.1.11.1 |
hh3cFcLvLunThis object identifies the init LUN number of a FC.ro Integer32 .1.3.6.1.4.1.25506.10.5.1.11.1.1 |
hh3cFcTargetWwpnNameThis object identifies the name list of FC Target WWPN(World Wide Port Name).rw Hh3cWwpnListType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.11.1.2 |
hh3cFcInitiatorWwpnNameThis object identifies the name list of FC Initiator WWPN(World Wide Port Name).rw Hh3cWwpnListType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.5.1.11.1.3 |
hh3cFcLvRowStatusThis object describes the actions to add or delete the logic resource of a FC.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.5.1.11.1.4 |