HH3C-ISDN-MIB
AI MIB Summary
The HH3C-ISDN-MIB enables monitoring and management of H3C ISDN interfaces, specifically tracking B-channel status, call setup/teardown states, and traffic counters for Primary Rate Interface (PRI) and Basic Rate Interface (BRI) connections.
This file describes the H3C MIB implementation of ISDN
Main OID:
hh3cIsdnMib.1.3.6.1.4.1.25506.8.36.9
49
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
hh3cIsdnMibThis file describes the H3C MIB implementation of ISDN MODULE-IDENTITY .1.3.6.1.4.1.25506.8.36.9 |
hh3cIsdnMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.36.9.1 |
hh3cisdnChannelB OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.36.9.1.1 |
hh3cChanbIsdnTableThis table is used to describe the router's B Channels infomation SEQUENCE OF HH3CChanbIsdnEntry .1.3.6.1.4.1.25506.8.36.9.1.1.1 |
hh3cChanbIsdnEntryA single B channels HH3CChanbIsdnEntry .1.3.6.1.4.1.25506.8.36.9.1.1.1.1 |
hh3cChanbIsdnIfthis object is used to describe the virtual interface value associated with one neighbor.ro INTEGER .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.1 |
hh3cChanbIsdnPermitthis object is used to describe the call permissions.ro Enumeration .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.2 |
hh3cChanbIsdnAddrthis object is used to descirbe the call address by which we call one nieghbor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.3 |
hh3cChanbIsdnCallerAddrthis object is used to describe the callser address which will be known by B channels.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.4 |
hh3cChanbIsdnCallTypethis object is used to describe that whether it is an incoming call or an outging call.ro Enumeration .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.5 |
hh3cChanbIsdnInfoTypethis object is used to describe the information type on the callro Enumeration .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.6 |
hh3cChanbIsdnStatethis object is used to manage the call by NMSro Enumeration .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.7 |
hh3cChanbIsdnCallFreeReasonthis object is used to describe the reason why last call is cleardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.8 |
hh3cChanbIsdnCallFreeCodethis object is used to describe the reason code for the last call down.ro INTEGER .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.9 |
hh3cChanbIsdnCallAcceptthis object is used to describe the accepted call number from the B channelsro Counter32 .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.10 |
hh3cChanbIsdnCallRejectthis object is used to describe the refused call number from B channels .ro Counter32 .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.11 |
hh3cChanbIsdnCallSuccessthis object is used to describe the successful call number to B channels after system restart.ro Counter32 .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.12 |
hh3cChanbIsdnCallFailurethis object is used to describe the failing call number to B channels after system restartro Counter32 .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.13 |
hh3cChanbIsdnMaxKeepTimeThis object is used to descirbe the maximum duration time in milliseconds.ro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.14 |
hh3cChanbIsdnLastKeepTimethis object is used to describe the last call duration time in millisecondsro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.15 |
hh3cChanbIsdnLastCallTimethis object is used to describe the sysUpTime after last call attempt was made.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.9.1.1.1.1.16 |
hh3cChanbTrapEnableThis object is used to control sending traprw Enumeration .1.3.6.1.4.1.25506.8.36.9.1.1.2 |
hh3cisdnQ931 OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.36.9.1.2 |
hh3cQ931IsdnControl OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.36.9.1.2.1 |
hh3cQ931CallSetupTrapEnableThis object is used to control sending callsetup trap.rw Enumeration .1.3.6.1.4.1.25506.8.36.9.1.2.1.1 |
hh3cQ931CallClearTrapEnableThis object is used to control sending callclear traprw Enumeration .1.3.6.1.4.1.25506.8.36.9.1.2.1.2 |
hh3cQ931IsdnTableThis table describes B channel information for the use of Q931 SEQUENCE OF Hh3cQ931IsdnEntry .1.3.6.1.4.1.25506.8.36.9.1.2.2 |
hh3cQ931IsdnEntryA B channel entry in the Q931. Hh3cQ931IsdnEntry .1.3.6.1.4.1.25506.8.36.9.1.2.2.1 |
hh3cQ931IsdnOpIndexIndex of the B ISDN channel interface managed by Q93ro Integer32 .1.3.6.1.4.1.25506.8.36.9.1.2.2.1.1 |
hh3cQ931IsdnLastCalledThis object describes the called ISDN number. When an outgoing call is established successfully, the value of this node is the call number of this device, otherwise the value is null stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.9.1.2.2.1.2 |
hh3cQ931IsdnLastCallingThis object describes the calling ISDN number. When an incoming call is established successfully, the value of this node is the call number of peer device, otherwise the value is null string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.9.1.2.2.1.3 |
hh3cQ931IsdnLastCauseDiscThis object describes last cause of disconnection. In hh3cQ931IsdnCallClear trap, the value of this node is the reason of disconnection, this node is only valid for hh3cQ931IsdnCallClear trap, the value of this node is unknown in other situation. unknown: unknown error. normCallClr: normal call clearing. noRouteToTransNet: no route to specified transit network. noRouteToDest: no route to destination. switchEquCongest: switching equipment congestion. netOutofOrder: network out of order.ro Enumeration .1.3.6.1.4.1.25506.8.36.9.1.2.2.1.4 |
hh3cQ931IsdnCallDirectionThis object describes the direction of the current call.ro Enumeration .1.3.6.1.4.1.25506.8.36.9.1.2.2.1.5 |
hh3cQ931IsdnCallTimeOpenThis object describes the start time of this call. start time is the time of an existent call that has just been established.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.9.1.2.2.1.6 |
hh3cQ931IsdnCallTimeCloseThis object describes the close time of this call. This node is only vaild for hh3cQ931IsdnCallClear trap. In other situation the value of this node is zero. In hh3cQ931IsdnCallClear trap, this node provides the time of an existent call that the call has just been cleared.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.8.36.9.1.2.2.1.7 |
hh3cIsdnLapd OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.36.9.1.3 |
hh3cLapdIsdnTableThis table is used to describe the config of ISDN D channel. SEQUENCE OF Hh3cLapdIsdnEntry .1.3.6.1.4.1.25506.8.36.9.1.3.1 |
hh3cLapdIsdnEntryISDN D channel config Hh3cLapdIsdnEntry .1.3.6.1.4.1.25506.8.36.9.1.3.1.1 |
hh3cLapdIsdnIfThis object is used to describe the D channel interface value associated with one neighbor.ro Integer32 .1.3.6.1.4.1.25506.8.36.9.1.3.1.1.1 |
hh3cLapdIsdnProtocolThis object is used to describe the protocol D channel applied. For E1, the protocol may be dss1, qsig, etsi. For T1, the protocol may be ess5, ansi, att, dss1, etsi, ni2, ntt, qsig. For BRI, the protocol may be ansi, dss1, etsi, ni, ntt.rw Enumeration .1.3.6.1.4.1.25506.8.36.9.1.3.1.1.2 |
hh3cLapdIsdnIfModeThe physical interface mode. For TE mode, the value of this object is userSide. For NT mode, the value of this object is networkSide.rw Enumeration .1.3.6.1.4.1.25506.8.36.9.1.3.1.1.3 |
hh3cLapdIsdnLinkStatusThe operational status of this interface: inactive all layers are inactive. l1Active layer 1 is activated, layer 2 datalink not established. l2Active layer 1 is activated, layer 2 datalink established.ro Enumeration .1.3.6.1.4.1.25506.8.36.9.1.3.1.1.4 |
hh3cLapdIsdnControl OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.36.9.1.3.2 |
hh3cLapdStatusTrapEnableThis object is used to control sending hh3cLapdIsdnStatusChange trap.rw Enumeration .1.3.6.1.4.1.25506.8.36.9.1.3.2.1 |
hh3cIsdnMibTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.36.9.2 |
hh3cChanbIsdnCallWhen one call is setup ,cleard or determined , the trap is sent to NMS NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.9.2.1 |
hh3cQ931IsdnCallSetupThis trap/inform is sent to the manager whenever a call is established successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.9.2.2 |
hh3cQ931IsdnCallClearThis trap/inform is sent to the manager under the following conditions: - an existent call is normally cleared. - an existent call is determined to have ultimately failed, and has been cleared. - the existent call is cleared when the BRI/PRI port is down. - the existent call is cleared when the dialer rule is down. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.9.2.3 |
hh3cLapdIsdnStatusChangeThis trap/inform is sent to the manager whenever the D-channel of an interface changes state. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.36.9.2.4 |