HH3C-IPSEC-MONITOR-MIB
The MIB is designed to get statistic information of IPSec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.
Main OID:
hh3cIPSecMonitor.1.3.6.1.4.1.25506.2.7
125
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
125 total| Object Name |
|---|
hh3cIPSecMonitorThe MIB is designed to get statistic information of
IPSec tunnels. With this MIB, we can get information of a certain
tunnel or all tunnels. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.7 |
hh3cIPSecObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.1 |
hh3cIPSecTunnelTableThe IPSec Phase-2 Tunnel Table. There is one
entry in this table for each active IPSec Phase-2 Tunnel. SEQUENCE OF Hh3cIPSecTunnelEntry .1.3.6.1.4.1.25506.2.7.1.1 |
hh3cIPSecTunnelEntryInformation about hh3cIPSecTunnelTable. Hh3cIPSecTunnelEntry .1.3.6.1.4.1.25506.2.7.1.1.1 |
hh3cIPSecTunIfIndexThe interface index( the ifIndex of ifTable ). Integer32 .1.3.6.1.4.1.25506.2.7.1.1.1.1 |
hh3cIPSecTunEntryIndexThe index of IPSec policy applied in the interface. Integer32 .1.3.6.1.4.1.25506.2.7.1.1.1.2 |
hh3cIPSecTunIndexThe index of IPSec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2,147,483,647. Integer32 .1.3.6.1.4.1.25506.2.7.1.1.1.3 |
hh3cIPSecTunIKETunnelIndexThe index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.1.1.4 |
hh3cIPSecTunLocalAddrThe IP address of the local peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.ro IpAddress .1.3.6.1.4.1.25506.2.7.1.1.1.5 |
hh3cIPSecTunRemoteAddrThe IP address of the remote peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.ro IpAddress .1.3.6.1.4.1.25506.2.7.1.1.1.6 |
hh3cIPSecTunKeyTypeThe key negotiate mode used by the IPSec Phase-2 Tunnel.ro Hh3cIPSecNegoType .1.3.6.1.4.1.25506.2.7.1.1.1.7 |
hh3cIPSecTunEncapModeThe encapsulation mode used by the IPSec Phase-2 Tunnel.ro Hh3cEncapMode .1.3.6.1.4.1.25506.2.7.1.1.1.8 |
hh3cIPSecTunInitiatorThe initiator of this IPSec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.ro Enumeration .1.3.6.1.4.1.25506.2.7.1.1.1.9 |
hh3cIPSecTunLifeSizeThe negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes.
0 is defined as invalid value.ro Gauge32 .1.3.6.1.4.1.25506.2.7.1.1.1.10 |
hh3cIPSecTunLifeTimeThe negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.1.1.11 |
hh3cIPSecTunRemainTimeThe remain time of SA in seconds. 2147483647 is defined as invalid
value.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.1.1.12 |
hh3cIPSecTunActiveTimeThe duration the IPSec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.1.1.13 |
hh3cIPSecTunRemainSizeThe remain LifeSize of SA in kilobytes. 0 is defined as
invalid value.ro Gauge32 .1.3.6.1.4.1.25506.2.7.1.1.1.14 |
hh3cIPSecTunTotalRefreshesThe total number of security association refreshing performed.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.1.1.15 |
hh3cIPSecTunCurrentSaInstancesThe number of security associations which are currently active
or expiring.ro Gauge32 .1.3.6.1.4.1.25506.2.7.1.1.1.16 |
hh3cIPSecTunInSaEncryptAlgoThe encryption algorithm used by the inbound security association
of the IPSec Phase-2 Tunnel.ro Hh3cEncryptAlgo .1.3.6.1.4.1.25506.2.7.1.1.1.17 |
hh3cIPSecTunInSaAhAuthAlgoThe authentication algorithm used by the inbound authentication
header (AH) security association of the IPSec Phase-2 Tunnel.ro Hh3cAuthAlgo .1.3.6.1.4.1.25506.2.7.1.1.1.18 |
hh3cIPSecTunInSaEspAuthAlgoThe authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.ro Hh3cAuthAlgo .1.3.6.1.4.1.25506.2.7.1.1.1.19 |
hh3cIPSecTunDiffHellmanGrpThe Diffie Hellman Group used by the security association of the
IPSec Phase-2 Tunnel.ro Hh3cDiffHellmanGrp .1.3.6.1.4.1.25506.2.7.1.1.1.20 |
hh3cIPSecTunOutSaEncryptAlgoThe encryption algorithm used by the outbound security
association of the IPSec Phase-2 Tunnel.ro Hh3cEncryptAlgo .1.3.6.1.4.1.25506.2.7.1.1.1.21 |
hh3cIPSecTunOutSaAhAuthAlgoThe authentication algorithm used by the outbound
authentication header (AH) security association of
the IPSec Phase-2 Tunnel.ro Hh3cAuthAlgo .1.3.6.1.4.1.25506.2.7.1.1.1.22 |
hh3cIPSecTunOutSaEspAuthAlgoThe authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.ro Hh3cAuthAlgo .1.3.6.1.4.1.25506.2.7.1.1.1.23 |
hh3cIPSecTunPolicyNameThe policy name used by this IPSec tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.7.1.1.1.24 |
hh3cIPSecTunPolicyNumThe sequence number of policy used by this IPSec tunnel.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.1.1.25 |
hh3cIPSecTunStatusThe status of the IPSec Tunnel.ro Enumeration .1.3.6.1.4.1.25506.2.7.1.1.1.26 |
hh3cIPSecTunnelStatTableThe IPSec Phase-2 Tunnel Statistics Table. SEQUENCE OF Hh3cIPSecTunnelStatEntry .1.3.6.1.4.1.25506.2.7.1.2 |
hh3cIPSecTunnelStatEntryInformation about hh3cIPSecTunnelStatTable. Hh3cIPSecTunnelStatEntry .1.3.6.1.4.1.25506.2.7.1.2.1 |
hh3cIPSecTunInOctetsThe total number of octets received by this IPSec Phase-2 Tunnel.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.2.1.1 |
hh3cIPSecTunInDecompOctetsThe total number of decompressed octets received by this IPSec
Phase-2 Tunnel. This value is accumulated AFTER the packet
is decompressed.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.2.1.2 |
hh3cIPSecTunInPktsThe total number of packets received by this IPSec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.2.1.3 |
hh3cIPSecTunInDropPktsThe total number of packets dropped during receiving process
by this IPSec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.2.1.4 |
hh3cIPSecTunInReplayDropPktsThe total number of packets dropped during
receiving process due to Anti-Replay process
by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.5 |
hh3cIPSecTunInAuthFailsThe total number of inbound authentication's
which ended in failure by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.6 |
hh3cIPSecTunInDecryptFailsThe total number of inbound decryption's
which ended in failure by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.7 |
hh3cIPSecTunOutOctetsThe total number of octets sent by this IPSec Phase-2 Tunnel.
This value is accumulated AFTER determining whether or not
the packet should be compressed.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.2.1.8 |
hh3cIPSecTunOutUncompOctetsThe total number of uncompressed octets sent by this IPSec Phase-2
Tunnel.This value is accumulated BEFORE the packet is compressed.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.2.1.9 |
hh3cIPSecTunOutPktsThe total number of packets sent by this IPSec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.2.1.10 |
hh3cIPSecTunOutDropPktsThe total number of packets dropped during sending process
by this IPSec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.2.1.11 |
hh3cIPSecTunOutEncryptFailsThe total number of outbound encryption's which ended in failure
by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.12 |
hh3cIPSecTunNoMemoryDropPktsThe total number of packets dropped due to no enough memory by this
IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.13 |
hh3cIPSecTunQueueFullDropPktsThe total number of packets dropped due to queue full by this
IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.14 |
hh3cIPSecTunInvalidLenDropPktsThe total number of packets dropped due to invalid length packet
by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.15 |
hh3cIPSecTunTooLongDropPktsThe total number of packets dropped due to too long packet by this
IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.16 |
hh3cIPSecTunInvalidSaDropPktsThe total number of packets dropped due to invalid SA by this
IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.2.1.17 |
hh3cIPSecSaTableThe IPSec Phase-2 Security Protection Index Table. This table
contains an entry for each active and expiring security association. SEQUENCE OF Hh3cIPSecSaEntry .1.3.6.1.4.1.25506.2.7.1.3 |
hh3cIPSecSaEntryInformation about hh3cIPSecSaTable. Hh3cIPSecSaEntry .1.3.6.1.4.1.25506.2.7.1.3.1 |
hh3cIPSecSaIndexThe number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPSec Phase-2 Tunnel. The value of this object will
wrap at 2,147,483,647. Integer32 .1.3.6.1.4.1.25506.2.7.1.3.1.1 |
hh3cIPSecSaDirectionThe direction of the SA.ro Enumeration .1.3.6.1.4.1.25506.2.7.1.3.1.2 |
hh3cIPSecSaValueThe value of the SPI.ro Unsigned32 .1.3.6.1.4.1.25506.2.7.1.3.1.3 |
hh3cIPSecSaProtocolThe security protocol of the SA.ro Hh3cSaProtocol .1.3.6.1.4.1.25506.2.7.1.3.1.4 |
hh3cIPSecSaEncryptAlgoThe encryption algorithm used by the security association
of the IPSec Phase-2 Tunnel.ro Hh3cEncryptAlgo .1.3.6.1.4.1.25506.2.7.1.3.1.5 |
hh3cIPSecSaAuthAlgoThe authentication algorithm used by the SA.ro Hh3cAuthAlgo .1.3.6.1.4.1.25506.2.7.1.3.1.6 |
hh3cIPSecSaStatusThe status of the SA.ro Enumeration .1.3.6.1.4.1.25506.2.7.1.3.1.7 |
hh3cIPSecTrafficTableThe IPSec Phase-2 Tunnel Traffic Table. SEQUENCE OF Hh3cIPSecTrafficEntry .1.3.6.1.4.1.25506.2.7.1.4 |
hh3cIPSecTrafficEntryInformation about hh3cIPSecTrafficTable. Hh3cIPSecTrafficEntry .1.3.6.1.4.1.25506.2.7.1.4.1 |
hh3cIPSecTrafficLocalTypeThe type of local peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.ro Hh3cTrafficType .1.3.6.1.4.1.25506.2.7.1.4.1.1 |
hh3cIPSecTrafficLocalAddr1The first specification of local peer's IP address. If
the local peer type is single IP address, then this is the
value of the IP address. If the local peer type is IP subnet,
then this is the value of the subnet. If the local peer type
is IP address range, then this is the value of beginning IP
address of the range.ro IpAddress .1.3.6.1.4.1.25506.2.7.1.4.1.2 |
hh3cIPSecTrafficLocalAddr2The second specification of local peer's IP address. If the local
peer type is single IP address, then this is the value of the
IP address. If the local peer type is IP subnet, then this is
the value of the subnet mask. If the local peer type is IP
address range, then this is the value of ending IP address of
the range.ro IpAddress .1.3.6.1.4.1.25506.2.7.1.4.1.3 |
hh3cIPSecTrafficLocalProtocolThe protocol number of the local peer's traffic.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.4.1.4 |
hh3cIPSecTrafficLocalPortThe port number of the local peer's traffic.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.4.1.5 |
hh3cIPSecTrafficRemoteTypeThe type of remote peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.ro Hh3cTrafficType .1.3.6.1.4.1.25506.2.7.1.4.1.6 |
hh3cIPSecTrafficRemoteAddr1The first specification of remote peer's IP address.
If the remote peer type is single IP address, then
this is the value of the IP address. If the remote
peer type is IP subnet, then this is the value
of the subnet. If the remote peer type is IP
address range, then this is the value of beginning
IP address of the range.ro IpAddress .1.3.6.1.4.1.25506.2.7.1.4.1.7 |
hh3cIPSecTrafficRemoteAddr2Single IP address, then this is the value of the IP
address. If the remote peer type is IP subnet,
then this is the value of the subnet mask. If the
remote peer type is IP address range, then this
is the value of ending IP address of the range.ro IpAddress .1.3.6.1.4.1.25506.2.7.1.4.1.8 |
hh3cIPSecTrafficRemoteProtocolThe protocol number of the remote peer's traffic.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.4.1.9 |
hh3cIPSecTrafficRemotePortThe port number of the remote peer's traffic.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.4.1.10 |
hh3cIPSecGlobalStats OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.1.5 |
hh3cIPSecGlobalActiveTunnelsThe total number of currently active IPSec Phase-2 Tunnels.ro Gauge32 .1.3.6.1.4.1.25506.2.7.1.5.1 |
hh3cIPSecGlobalActiveSasThe total number of currently active or expiring IPSec Phase-2 SA.ro Gauge32 .1.3.6.1.4.1.25506.2.7.1.5.2 |
hh3cIPSecGlobalInOctetsThe total number of octets received by all current and previous
IPSec Phase-2 Tunnels. This value is accumulated BEFORE determining
whether or not the packet should be decompressed.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.5.3 |
hh3cIPSecGlobalInDecompOctetsThe total number of decompressed octets received by all current
and previous IPSec Phase-2 Tunnels. This value is accumulated
AFTER the packet is decompressed.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.5.4 |
hh3cIPSecGlobalInPktsThe total number of packets received by all current and
previous IPSec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.5.5 |
hh3cIPSecGlobalInDropsThe total number of packets dropped during receiving
process by all current and previous IPSec Phase-2
Tunnels.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.5.6 |
hh3cIPSecGlobalInReplayDropsThe total number of packets dropped during receiving
process due to Anti-Replay process by all
current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.7 |
hh3cIPSecGlobalInAuthFailsThe total number of inbound authentication's which ended
in failure by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.8 |
hh3cIPSecGlobalInDecryptFailsThe total number of inbound decryption's which ended in
failure by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.9 |
hh3cIPSecGlobalOutOctetsThe total number of octets sent by all current and previous
IPSec Phase-2 Tunnels. This value is accumulated AFTER
determining whether or not the packet should be compressed.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.5.10 |
hh3cIPSecGlobalOutUncompOctetsThe total number of uncompressed octets sent by all current
and previous IPSec Phase-2 Tunnels. This value is accumulated
BEFORE the packet is compressed.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.5.11 |
hh3cIPSecGlobalOutPktsThe total number of packets sent by all current and previous
IPSec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.5.12 |
hh3cIPSecGlobalOutDropsThe total number of packets dropped during sending process
by all current and previous IPSec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.25506.2.7.1.5.13 |
hh3cIPSecGlobalOutEncryptFailsThe total number of outbound encryption's which ended in failure
by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.14 |
hh3cIPSecGlobalNoMemoryDropPktsThe total number of packets dropped due to no enough memory
by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.15 |
hh3cIPSecGlobalNoFindSaDropPktsThe total number of packets dropped due to not find SA by
all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.16 |
hh3cIPSecGlobalQueueFullDropPktsThe total number of packets dropped due to queue full by
all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.17 |
hh3cIPSecGlobalInvalidLenDropPktsThe total number of packets dropped due to invalid packet
length by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.18 |
hh3cIPSecGlobalTooLongDropPktsThe total number of packets dropped due to too long packet by
all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.19 |
hh3cIPSecGlobalInvalidSaDropPktsThe total number of packets dropped due to invalid SA by all
current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.25506.2.7.1.5.20 |
hh3cIPSecTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.1.6 |
hh3cIPSecPolicyNameThe IPSec policy name with a trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.7.1.6.1 |
hh3cIPSecPolicySeqNumThe IPSec policy sequence number with a trap.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.6.2 |
hh3cIPSecPolicySizeThe number of IPSec policies with a trap.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.6.3 |
hh3cIPSecSpiValueThe SPI value associated with a trap.ro Integer32 .1.3.6.1.4.1.25506.2.7.1.6.4 |
hh3cIPSecTrapCntl OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.1.7 |
hh3cIPSecTrapGlobalCntlIndicates whether all IPSec traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.1 |
hh3cIPSecTunnelStartTrapCntlIndicates whether hh3cIPSecTunnelStart traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.2 |
hh3cIPSecTunnelStopTrapCntlIndicates whether hh3cIPSecTunnelStop traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.3 |
hh3cIPSecNoSaTrapCntlIndicates whether hh3cIPSecNoSaFailure traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.4 |
hh3cIPSecAuthFailureTrapCntlIndicates whether hh3cIPSecAuthFailFailure traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.5 |
hh3cIPSecEncryFailureTrapCntlIndicates whether hh3cIPSecEncryFailFailure traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.6 |
hh3cIPSecDecryFailureTrapCntlIndicates whether hh3cIPSecDecryFailFailure traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.7 |
hh3cIPSecInvalidSaTrapCntlIndicates whether hh3cIPSec Invalid Sa Failure traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.8 |
hh3cIPSecPolicyAddTrapCntlIndicates whether hh3cIPSecPolicyAdd traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.9 |
hh3cIPSecPolicyDelTrapCntlIndicates whether hh3cIPSecPolicyDel traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.10 |
hh3cIPSecPolicyAttachTrapCntlIndicates whether hh3cIPSecPolicyAttach traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.11 |
hh3cIPSecPolicyDetachTrapCntlIndicates whether hh3cIPSecPolicyDetach traps should be generated.rw Hh3cTrapStatus .1.3.6.1.4.1.25506.2.7.1.7.12 |
hh3cIPSecTrap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.1.8 |
hh3cIPSecNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.1.8.1 |
hh3cIPSecTunnelStartThis notification is generated when an IPSec Phase-2
Tunnel is created. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.1 |
hh3cIPSecTunnelStopThis notification is generated when an IPSec Phase-2
Tunnel is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.2 |
hh3cIPSecNoSaFailureThis notification is generated when an IPSec Phase-2
non-existent SA error occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.3 |
hh3cIPSecAuthFailFailureThis notification is generated when the IPSec phase-2
authentication failure occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.4 |
hh3cIPSecEncryFailFailureThis notification is generated when the IPSec phase-2
tunnel has an encrypting failure. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.5 |
hh3cIPSecDecryFailFailureThis notification is generated when the IPSec phase-2
tunnel has a decrypting failure. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.6 |
hh3cIPSecInvalidSaFailureThis notification is generated when the IPSec phase-2
invalid SA failure occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.7 |
hh3cIPSecPolicyAddThis notification is generated when an IPSec policy is added. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.8 |
hh3cIPSecPolicyDelThis notification is generated when an IPSec policy is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.9 |
hh3cIPSecPolicyAttachThis notification is generated when an IPSec policy is attached
with one interface. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.10 |
hh3cIPSecPolicyDetachThis notification is generated when an IPSec policy is detached
with one interface. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.7.1.8.1.11 |
hh3cIPSecConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.2 |
hh3cIPSecCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.2.1 |
hh3cIPSecGroups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.7.2.2 |