HH3C-IF-EXT-MIB
This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detailed information.
Main OID:
hh3cIfExt.1.3.6.1.4.1.25506.2.40
81
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
81 total| Object Name |
|---|
hh3cIfExtThis MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detailed information. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.40 |
hh3cIfExtScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.1 |
hh3cIfStatGlobalFlowIntervalSampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.25506.2.40.1.1 |
hh3cIfShutDownIntervalSet the port status detection timer. The device starts a port status detection timer when a port is shut down by a protocol. Once the timer expires, the device brings up the port so the port status reflects the port's physical status.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.25506.2.40.1.2 |
hh3cIfExtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.2 |
hh3cIfStat OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.2.1 |
hh3cIfStatScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.2.1.1 |
hh3cIfStatTable OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.2.1.2 |
hh3cIfFlowStatTableThis table contains objects to get statistic information of interfaces on a device. SEQUENCE OF Hh3cIfFlowStatEntry .1.3.6.1.4.1.25506.2.40.2.1.2.1 |
hh3cIfFlowStatEntryEntry items Hh3cIfFlowStatEntry .1.3.6.1.4.1.25506.2.40.2.1.2.1.1 |
hh3cIfStatFlowIntervalSampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.25506.2.40.2.1.2.1.1.1 |
hh3cIfStatFlowInBitsIn bits in the specific interval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.1.1.2 |
hh3cIfStatFlowOutBitsOut bits in specific interval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.1.1.3 |
hh3cIfStatFlowInPktsIn Packets in the specific interval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.1.1.4 |
hh3cIfStatFlowOutPktsOut packets in the specific interval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.1.1.5 |
hh3cIfStatFlowInBytesIn bytes in the specific interval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.1.1.6 |
hh3cIfStatFlowOutBytesOut bytes in the specific interval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.1.1.7 |
hh3cIfSpeedStatTableThis table contains objects to get average speed information in the specific interval of interfaces on a device. SEQUENCE OF Hh3cIfSpeedStatEntry .1.3.6.1.4.1.25506.2.40.2.1.2.2 |
hh3cIfSpeedStatEntryEntry items Hh3cIfSpeedStatEntry .1.3.6.1.4.1.25506.2.40.2.1.2.2.1 |
hh3cIfSpeedStatIntervalSampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.25506.2.40.2.1.2.2.1.1 |
hh3cIfSpeedStatInPktsAverage of input packets per second in the specific interval by hh3cIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.2.1.2 |
hh3cIfSpeedStatOutPktsAverage of output packets per second in the specific interval by hh3cIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.2.1.3 |
hh3cIfSpeedStatInBytesAverage of input bytes per second in the specific interval by hh3cIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.2.1.4 |
hh3cIfSpeedStatOutBytesAverage of output bytes per second in the specific interval by hh3cIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.25506.2.40.2.1.2.2.1.5 |
hh3cIfHCFlowStatTableThis table contains objects to get statistic information of interfaces on a device. SEQUENCE OF Hh3cIfHCFlowStatEntry .1.3.6.1.4.1.25506.2.40.2.1.2.3 |
hh3cIfHCFlowStatEntryEntry items Hh3cIfHCFlowStatEntry .1.3.6.1.4.1.25506.2.40.2.1.2.3.1 |
hh3cIfStatFlowHCInBitsIn bits in the specific interval. This object is a 64-bit version of hh3cIfStatFlowInBits.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.25506.2.40.2.1.2.3.1.1 |
hh3cIfStatFlowHCOutBitsOut bits in specific interval. This object is a 64-bit version of hh3cIfStatFlowOutBits.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.25506.2.40.2.1.2.3.1.2 |
hh3cIfStatFlowHCInPktsIn Packets in the specific interval. This object is a 64-bit version of hh3cIfStatFlowInPkts.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.25506.2.40.2.1.2.3.1.3 |
hh3cIfStatFlowHCOutPktsOut packets in the specific interval. This object is a 64-bit version of hh3cIfStatFlowOutPkts.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.25506.2.40.2.1.2.3.1.4 |
hh3cIfStatFlowHCInBytesIn bytes in the specific interval. This object is a 64-bit version of hh3cIfStatFlowInBytes.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.25506.2.40.2.1.2.3.1.5 |
hh3cIfStatFlowHCOutBytesOut bytes in the specific interval. This object is a 64-bit version of hh3cIfStatFlowOutBytes.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.25506.2.40.2.1.2.3.1.6 |
hh3cIfControl OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.2.2 |
hh3cRTParentIfTableThis table contains all interfaces that can create sub interface. SEQUENCE OF Hh3cRTParentIfEntry .1.3.6.1.4.1.25506.2.40.2.2.1 |
hh3cRTParentIfEntryThis entry describes a interface that can create sub interface. Hh3cRTParentIfEntry .1.3.6.1.4.1.25506.2.40.2.2.1.1 |
hh3cRTParentIfIndexThe index of interface that can creat sub interface. The value is the same as ifIndex value for this interface. Integer32 .1.3.6.1.4.1.25506.2.40.2.2.1.1.1 |
hh3cRTMinSubIfOrdinalThe minimum ordinal of the sub interface can be created.ro Integer32 .1.3.6.1.4.1.25506.2.40.2.2.1.1.2 |
hh3cRTMaxSubIfOrdinalThe max ordinal of the sub interface can be created.ro Integer32 .1.3.6.1.4.1.25506.2.40.2.2.1.1.3 |
hh3cRTSubIfTableThis table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by hh3cRTSubIfParentIfIndex and the hh3cRTSubIfOrdinal must be in the range between hh3cRTMinSubIfOrdinal and hh3cRTMaxSubIfOrdinal of the parent interface from hh3cRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP. SEQUENCE OF Hh3cRTSubIfEntry .1.3.6.1.4.1.25506.2.40.2.2.2 |
hh3cRTSubIfEntryThe hh3cRTSubIfTable entry items Hh3cRTSubIfEntry .1.3.6.1.4.1.25506.2.40.2.2.2.1 |
hh3cRTSubIfParentIfIndexThe parent interface index. The value should be the same as the hh3cRTParentIfIndex. Integer32 .1.3.6.1.4.1.25506.2.40.2.2.2.1.1 |
hh3cRTSubIfOrdinalThe ordinal of sub interface. It should between hh3cRTMinSubIfOrdinal and hh3cRTMaxSubIfOrdinal of the parent interface. Integer32 .1.3.6.1.4.1.25506.2.40.2.2.2.1.2 |
hh3cRTSubIfSubIfIndexThe ifIndex value of the sub interfacero Integer32 .1.3.6.1.4.1.25506.2.40.2.2.2.1.3 |
hh3cRTSubIfSubIfDescThe name of the interfacero DisplayString .1.3.6.1.4.1.25506.2.40.2.2.2.1.4 |
hh3cRTSubIfRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.40.2.2.2.1.5 |
hh3cIfLinkModeTableThis table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode. SEQUENCE OF Hh3cIfLinkModeEntry .1.3.6.1.4.1.25506.2.40.2.2.3 |
hh3cIfLinkModeEntryThe interface link mode table entry Hh3cIfLinkModeEntry .1.3.6.1.4.1.25506.2.40.2.2.3.1 |
hh3cIfLinkModeIndexThe value is same as ifIndex. Integer32 .1.3.6.1.4.1.25506.2.40.2.2.3.1.1 |
hh3cIfLinkModeThe current link mode of the interface If hh3cIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface.rw Enumeration .1.3.6.1.4.1.25506.2.40.2.2.3.1.2 |
hh3cIfLinkModeSwitchSupportWhether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.40.2.2.3.1.3 |
hh3cIfInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.2.3 |
hh3cIfPhysicalNumberRepresents the number of physical interfaces in the device.ro Integer32 .1.3.6.1.4.1.25506.2.40.2.3.1 |
hh3cIfTableA list of interface entries. The number of entries is given by the value of IfNumber. SEQUENCE OF Hh3cIfEntry .1.3.6.1.4.1.25506.2.40.2.3.2 |
hh3cIfEntryAn entry containing management information applicable to a particular interface. Hh3cIfEntry .1.3.6.1.4.1.25506.2.40.2.3.2.1 |
hh3cIfUpDownTimesThe interface's up/down times, since the device was initialized.ro Integer32 .1.3.6.1.4.1.25506.2.40.2.3.2.1.1 |
hh3cIfMtuThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface.rw Integer32 .1.3.6.1.4.1.25506.2.40.2.3.2.1.2 |
hh3cIfBandwidthRateThe rate of the bandwidth for an interface.ro Integer32 .1.3.6.1.4.1.25506.2.40.2.3.2.1.3 |
hh3cIfDiscardPktRateThe rate of the discarded packets for an interface.ro Integer32 .1.3.6.1.4.1.25506.2.40.2.3.2.1.4 |
hh3cIfStatusKeepTimeThe time since the interface entered its current operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.25506.2.40.2.3.2.1.5 |
hh3cIfInNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.25506.2.40.2.3.2.1.6 |
hh3cIfOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address.ro Counter64 .1.3.6.1.4.1.25506.2.40.2.3.2.1.7 |
hh3cIfIsPoeWhether the interface supports poe.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.40.2.3.2.1.8 |
hh3cIfOperStatusCurrent status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hh3cIfOperStatus should be admindown. If ifAdminStatus is changed to up, hh3cIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state.ro Enumeration .1.3.6.1.4.1.25506.2.40.2.3.2.1.9 |
hh3cIfDownTimesNumber of times the interface went down, since the device was initialized.ro Integer32 .1.3.6.1.4.1.25506.2.40.2.3.2.1.10 |
hh3cIfUsingTableA table containing management information applicable to splitting interfaces. To improve port density, reduce costs, and improve network flexibility, a high-bandwidth interface can be split into multiple low-bandwidth breakout interfaces, and the breakout interfaces can be combined into a higher-bandwidth interface. For example, a 40-GE interface can be split into four 10-GE breakout interfaces. After the operation takes effect on a 40-GE interface, the system deletes the 40-GE interface and creates four 10-GE breakout interfaces. SEQUENCE OF Hh3cIfUsingEntry .1.3.6.1.4.1.25506.2.40.2.3.3 |
hh3cIfUsingEntryAn entry of hh3cIfUsingTable. Hh3cIfUsingEntry .1.3.6.1.4.1.25506.2.40.2.3.3.1 |
hh3cIfUsingIndexIndex of an interface which can be split into multiple low-bandwidth breakout interfaces or be restored to a high-bandwidth interface. Integer32 .1.3.6.1.4.1.25506.2.40.2.3.3.1.1 |
hh3cIfUsingSupportTypeThis object specifies the port type which can be split into or restored to. From lowest bit, each bit corresponds to a port type ('10GE', '20GE', '40GE', '100GE'). For example, value 3 means this object can be split into 10GE or 20GE, value 4 means this object can be split into 40GE, or can be restored to 40GE.ro Integer32 .1.3.6.1.4.1.25506.2.40.2.3.3.1.2 |
hh3cIfUsingTypeThis object specifies the port type that can be split into or restored to. After this object is set to a none-zero value, the operation returns success in the following cases: 1. The original instance stills exist and is read as a non-zero value. In this case, object hh3cIfUsingStatus change to needReboot(1), which means that you need to reboot the line card (for distributed devices) or device (for centralized devices) where the port is located to make the operation take effect. Set this object to noUsing(0) for cancelling the operation. 2. The operation takes effect immediately. Original instance is deleted and new instance is created while the operation takes effect.rw Enumeration .1.3.6.1.4.1.25506.2.40.2.3.3.1.3 |
hh3cIfUsingStatusAfter object hh3cIfUsingType is set to a none-zero value, if the operation does not takes effect before reboot the line card (for distributed devices) or device (for centralized devices) where the port is located, the value of this object is needReboot(1).ro Enumeration .1.3.6.1.4.1.25506.2.40.2.3.3.1.4 |
hh3cIfExtTrap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.3 |
hh3cIfExtTrapPrex OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.3.0 |
hh3cIfBandwidthUsageHighThe notification is generated when the rate of the bandwidth for the interface exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.40.3.0.1 |
hh3cIfDiscardPktRateHighThe notification is generated when the rate of the discarded packets for the interface exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.40.3.0.2 |
hh3cIfDampeningSuppressedThe notification is generated when the interface is suppressed via dampening. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.40.3.0.3 |
hh3cIfDampeningNotSuppressedThe notification is generated when the interface is resumed to not suppressed via dampening. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.40.3.0.4 |
hh3cIfExtTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.40.3.1 |
hh3cIfExtTrapCfgTableThe trap configuration table. SEQUENCE OF Hh3cIfExtTrapCfgEntry .1.3.6.1.4.1.25506.2.40.3.1.1 |
hh3cIfExtTrapCfgEntryAn entry for this table. Hh3cIfExtTrapCfgEntry .1.3.6.1.4.1.25506.2.40.3.1.1.1 |
hh3cIfBandwidthUpperLimitThe rate of the bandwidth upper limit for an interface.rw Integer32 .1.3.6.1.4.1.25506.2.40.3.1.1.1.1 |
hh3cIfDiscardPktRateUpperLimitThe rate of the discarded packets upper limit for an interface.rw Integer32 .1.3.6.1.4.1.25506.2.40.3.1.1.1.2 |