HH3C-GRE-MIB

AI MIB Summary

The HH3C-GRE-MIB module provides SNMP access to configure and monitor the operational state of Generic Routing Encapsulation (GRE) tunnels on H3C network devices, exposing metrics such as tunnel interface status, encapsulation parameters, and traffic counters.

This MIB contains objects to Manage configuration and Monitor running state for GRE.

Main OID:

hh3cGre.1.3.6.1.4.1.25506.2.54

Objects

Active

Status

Dependencies

Imported Objects

HH3C-OID-MIB

SNMPv2-SMI

IF-MIB

Objects

7 total

Object Name	Syntax	OID
hh3cGreThis MIB contains objects to Manage configuration and Monitor running state for GRE. MODULE-IDENTITY `.1.3.6.1.4.1.25506.2.54`	MODULE-IDENTITY	`.1.3.6.1.4.1.25506.2.54`
hh3cGreObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.25506.2.54.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.25506.2.54.1`
hh3cGreTableA table of Generic Routing Encapsulation(GRE) configuration. It contains configuration of GRE Key, and enable flags of Key and Checksum. The detail of Key and Checksum is described in RFC2784 and RFC2890. SEQUENCE OF Hh3cGreEntry `.1.3.6.1.4.1.25506.2.54.1.1`	SEQUENCE OF Hh3cGreEntry	`.1.3.6.1.4.1.25506.2.54.1.1`
hh3cGreEntryThe entry of hh3cGreTable Hh3cGreEntry `.1.3.6.1.4.1.25506.2.54.1.1.1`	Hh3cGreEntry	`.1.3.6.1.4.1.25506.2.54.1.1.1`
hh3cGreKeyValueThe value of GRE keyrw Unsigned32 `.1.3.6.1.4.1.25506.2.54.1.1.1.1`	Unsigned32	`.1.3.6.1.4.1.25506.2.54.1.1.1.1`
hh3cGreKeyThe enable flag of GRE keyrw Enumeration `.1.3.6.1.4.1.25506.2.54.1.1.1.2`	Enumeration	`.1.3.6.1.4.1.25506.2.54.1.1.1.2`
hh3cGreChecksumThe enable flag of GRE Checksumrw Enumeration `.1.3.6.1.4.1.25506.2.54.1.1.1.3`	Enumeration	`.1.3.6.1.4.1.25506.2.54.1.1.1.3`

More MIBs from Hangzhou H3C

Browse all Hangzhou H3CMIBs →

HH3C-ENTITY-VENDORTYPE-OID-MIB

SNMP MIB module

SNMP MIB module

The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.

643 objects→

HH3C-ACL-MIB

The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.

538 objects→

HH3C-CBQOS2-MIB

The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.

472 objects→

HH3C-WIPS-MIB

SNMP MIB module

454 objects→