HH3C-FCOE-MODE-MIB
Imported Objects
Objects
4 total| Object Name |
|---|
hh3cFcoeModeThis MIB module is for configuring and monitoring the working mode of FCoE (Fibre Channel over Ethernet) features. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.135 |
hh3cFcoeModeMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.135.1 |
hh3cFcoeModeCfgModeThis object specifies the FCoE modes the switch supports. The object has four available values: 1: non-FCoE mode. 2: FCF mode. 3: NPV mode. 4: Transit mode. The switch mode can only be converted from non-FCoE mode to one of FCoE modes, or vice versa, but cannot be converted directly among the other three FCoE modes. To convert among the other three FCoE modes, the switch should first be converted to non-FCoE mode. After converting the switch to non-FCoE mode, FCoE-related configurations in the original FCoE mode will be cleared.rw Integer32 .1.3.6.1.4.1.25506.2.135.1.1 |
hh3cFcoeModeCfgLastResultThis object specifies the result of the latest FCoE mode configuration. The object has four values: success - Configured successfully. noLicence - Configured unsuccessfully for lack of licence. needReset - Configured unsuccessfully, because the desired mode is not non-FCoE mode, and the mode should be first set to non-FCoE mode. unknownFault - Configured unsuccessfully for unknown fault.ro Enumeration .1.3.6.1.4.1.25506.2.135.1.2 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →SNMP MIB module
SNMP MIB module
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
SNMP MIB module