HH3C-EPON-UNI-MIB
AI MIB Summary
The HH3C-EPON-UNI-MIB module provides SNMP management and real-time status monitoring for User Network Interface (UNI) parameters on Huawei-H3C Optical Network Units (ONUs) within an Ethernet Passive Optical Network (EPON) architecture. It enables the retrieval of current UNI configuration states, operational status, and interface statistics to facilitate granular troubleshooting and provisioning of the last-mile optical access layer.
The objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit).
Main OID:
hh3cEponUni.1.3.6.1.4.1.25506.2.42.5
148
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
148 total| Object Name |
|---|
hh3cEponUniThe objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit). MODULE-IDENTITY .1.3.6.1.4.1.25506.2.42.5 |
hh3cEponUniSysMan OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.5.1 |
hh3cEponUniSysManTableThis table defines several UNI system parameters. SEQUENCE OF Hh3cEponUniSysManEntry .1.3.6.1.4.1.25506.2.42.5.1.1 |
hh3cEponUniSysManEntryThe entry of hh3cEponUniSysManTable. Hh3cEponUniSysManEntry .1.3.6.1.4.1.25506.2.42.5.1.1.1 |
hh3cEponUniIndexThe index value which uniquely identifies the FE(fast Ethernet) interface of the ONU.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.1 |
hh3cEponUniDescrA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.ro OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.1.1.2 |
hh3cEponUniAdminStatusThe desired state of the user network interface. When a managed system initializes, all user network interfaces start with down(2) state. The testing(3)state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, hh3cEponUniAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.3 |
hh3cEponUniMdiType of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.4 |
hh3cEponUniPriorityThe priority of user network interface. If the value is larger, the priority will be higher.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.5 |
hh3cEponUniVlanTypeUNI vlan types.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.6 |
hh3cEponUniAccessVlanThe vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.7 |
hh3cEponUniTrunkPvidPVID(port vlan ID), the vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface.rw INTEGER .1.3.6.1.4.1.25506.2.42.5.1.1.1.8 |
hh3cEponUniVLANTrunkAllowListLowEach octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans. the vlan is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.1.1.9 |
hh3cEponUniVLANTrunkAllowListHighEach octet within this value specifies a set of eight vlans, with the first octet specifying vlans 2049 through 2056, the second octet specifying vlans 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered vlan, and the least significant bit represents the lowest numbered vlan. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans; the vlan is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.1.1.10 |
hh3cEponUniInboundLineRateThe value of the inbound line-rate. measured with kbps. The upper limit of the line-rate is the value of hh3cEponUniLineRateMax in the entry. It must be multiple of the value of hh3cEponUniLineRateStep. The default value of hh3cEponUniLineRate is the value of hh3cEponUniLineRateMax.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.11 |
hh3cEponUniOutboundLineRateThe value of the outbound line-rate. measured with kbps. The upper limit of the line-rate is the value of hh3cEponUniLineRateMax in the entry. It must be multiple of the value of hh3cEponUniLineRateStep. The default value of hh3cEponUniLineRate is the value of hh3cEponUniLineRateMax.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.12 |
hh3cEponUniFlowControlFlow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.1.1.13 |
hh3cEponUniSpeedUser network interface speed.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.14 |
hh3cEponUniDuplexUser network interface mode.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.15 |
hh3cEponUniVlanVPNStatusvlan VPN status. true(1) - vlan VPN status enable. false(2) - vlan VPN disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.1.1.16 |
hh3cEponUniCountResetReset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.17 |
hh3cEponUniPortIsolateenable - enable UNI port isolate setting. disable - disable UNI port isolate setting.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.18 |
hh3cEponUniVlanConfigurationThe vlan configuration of the related vlan mode. Transparent vlan mode: hh3cEponUniVlanConfiguration is a zero length string. Tag vlan mode: the first four octets were the tag assigned to untagged frames received on UNI, including TPID, VID,CFI and priority. Translation vlan mode: the first four octets were the old tag (including TPID, VID, CFI and priority), which is replaced by the new tag(including TPID, VID, CFI and priority), the second four octets.rw OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.1.1.23 |
hh3cEponUniAutoNegotiationenable - enable auto negotiation. disable - disable auto negotiation.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.25 |
hh3cEponUniRestartAutoNegForce to restart the auto negotiation process.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.26 |
hh3cEponUniLinkStatusThe link status of UNI.ro Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.29 |
hh3cEponUniInterfaceTypeUNI interface type.ro Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.30 |
hh3cEponUniVitualCableTestTrue(1): Virtual cable test enable. False(2): Virtual cable test disable.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.31 |
hh3cEponUniVCTCableStatusGet the cable status. Normal(1),cable is normal. Abnormal(2),cable is abnormal. AbnormalOpen(3),cable is abnormal because of open circuit. AbnormalShort(4),cable is abnormal because of short circuit. Failure(5),cable is abnormal because of testing failure.ro Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.32 |
hh3cEponUniVCTCableLengthGet the cable length. When hh3cEponUniVCTCableStatus is normal, the node stands for the length from the UNI port to the port opposite. When hh3cEponUniVCTCableStatus is abnormal, it stands for the lengh from the UNI port to the failure place. Unit:meter(m).ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.33 |
hh3cEponUniVCTImpedanceMismatchGet the cable impedance. Not-support(1),the UNI port does not support this function. True(2),impedance match. False(3),impedance mismatch.ro Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.34 |
hh3cEponUniVCTPairSkewGet the symmetry of cable. If the function is not supported, the default value 0 will be returned. Unit:nanosecond(ns).ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.35 |
hh3cEponUniVCTPairSwapNotSupport(1),the UNI port does not support this function. True(2),pair swap. False(3),not pair swap.ro Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.36 |
hh3cEponUniVCTPolaritySwapNotSupport(1),the UNI port does not support this function. True(2),polarity swap. False(3),not polarity swap.ro Enumeration .1.3.6.1.4.1.25506.2.42.5.1.1.1.37 |
hh3cEponUniVCTInsertionLossIf the function is not supported, the default value 0 will be returned. Unit:decibel(db).ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.38 |
hh3cEponUniVCTReturnLossIf the function is not supported, the default value 0 will be returned. Unit:decibel(db).ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.39 |
hh3cEponUniVCTNearendCrosstalkIf the function is not supported, the default value 0 will be returned. Unit:decibel(db).ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.40 |
hh3cEponUniVlanIf the function is not supported, the default value 0 will be returned. Unit:decibel(db).ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.1.1.41 |
hh3cEponUniCountTableA list of interface counter about frames entries. SEQUENCE OF Hh3cEponUniCountEntry .1.3.6.1.4.1.25506.2.42.5.1.2 |
hh3cEponUniCountEntryAn entry containing management information applicable to a particular interface. Hh3cEponUniCountEntry .1.3.6.1.4.1.25506.2.42.5.1.2.1 |
hh3cEponUniInStatsPktsThe total number of frames (including bad frames, broadcast frames, and multicast frames) received.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.1 |
hh3cEponUniInStatsUnicastPktsThe total number of good frames received that are directed to the unicast address. Note that this does not include multicast and broadcast frames.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.2 |
hh3cEponUniInStatsBroadcastPktsThe total number of good frames received that are directed to the broadcast address. Note that this does not include multicast frames.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.3 |
hh3cEponUniInStatsMulticastPktsThe total number of good frames received that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.4 |
hh3cEponUniInPausePktsA count of MAC Control frames received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.5 |
hh3cEponUniInTotalErrorsTotal count of the error frames received on this interface.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.6 |
hh3cEponUniInStatsCRCAlignErrorsThe total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.7 |
hh3cEponUniInStatsUndersizePktsThe total number of frames received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.8 |
hh3cEponUniInStatsOversizePktsThe total number of frames received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.9 |
hh3cEponUniInErrorbyOtherThe total number of error frames received on this interface.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.10 |
hh3cEponUniOutStatsPktsThe total number of frames (including bad frames, broadcast frames, and multicast frames) sent.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.11 |
hh3cEponUniOutStatsUnicastPktsThe total number of good frames sent that are directed to the unicast address. Note that this does not include multicast and broadcast frames.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.12 |
hh3cEponUniOutStatsBroadcastPktsThe total number of good frames sent that are directed to the broadcast address. Note that this does not include multicast frames.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.13 |
hh3cEponUniOutStatsMulticastPktsThe total number of good frames sent that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.14 |
hh3cEponUniOutStatsPausePktsThe total number of MAC control frames sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.15 |
hh3cEponUniOutTotalErrorsThe total number of error frames sent on this interface.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.16 |
hh3cEponUniOutStatsCollisionsThe best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.17 |
hh3cEponUniOutDelayExceededDiscardsThe number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.18 |
hh3cEponUniOutErrorbyOtherThe total number of other error frames sent on this interface. Other error frames means the error frames out of collision frames and excessive delayed frames.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.19 |
hh3cEponUniOutDroppedFramesThe total number of frames dropped because of buffer failure.ro Unsigned32 .1.3.6.1.4.1.25506.2.42.5.1.2.1.20 |
hh3cEponUniIgmpInfoTableThis table stores igmp information of UNI interface. SEQUENCE OF Hh3cEponUniIgmpInfoEntry .1.3.6.1.4.1.25506.2.42.5.1.3 |
hh3cEponUniIgmpInfoEntryThe entry of hh3cEponUniIgmpInfoTable. Hh3cEponUniIgmpInfoEntry .1.3.6.1.4.1.25506.2.42.5.1.3.1 |
hh3cEponUniMacIndexThe index uniquely identifies the igmp information in current UNI interface. Integer32 .1.3.6.1.4.1.25506.2.42.5.1.3.1.1 |
hh3cEponUniIgmpMacAddressA 6-octet read-only value carrying the individual MAC address indicates which igmp group the UNI interface belonging to.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.3.1.2 |
hh3cEponUniIgmpVlanIdAn integer range from 1 to 4094 indicates the vlan which the igmp Mac address has joined in.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.3.1.3 |
hh3cEponUniParaMan OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.5.1.4 |
hh3cEponUniLineRateMaxThe maximum value of the line-rate(kbps) that user network interface can be set.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.4.1 |
hh3cEponUniLineRateStepThe step of line-rate(kbps).ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.4.2 |
hh3cEponUniNumberOnOnuThe user network interface number on ONU.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.4.3 |
hh3cEponUniScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.5.1.5 |
hh3cEponUniPortPolicyTableUNI port policy configuration. SEQUENCE OF Hh3cEponUniPortPolicyEntry .1.3.6.1.4.1.25506.2.42.5.1.6 |
hh3cEponUniPortPolicyEntryThe entry of hh3cEponUniPortPolicyTable. Hh3cEponUniPortPolicyEntry .1.3.6.1.4.1.25506.2.42.5.1.6.1 |
hh3cEponUniPortPolicyStatusenable - enable UNI upstream port policing. disable - disable UNI upstream port policing.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.6.1.1 |
hh3cEponUniPortPolicyCirThe committed information rate, ranging from 1 to 102400, measured in kbps.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.6.1.2 |
hh3cEponUniPortPolicyBucketDepthThe depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.6.1.3 |
hh3cEponUniPortPolicyExtraBurstThe extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.6.1.4 |
hh3cEponUniPortPolicyInboundCirThe inbound committed information rate, measured in kbps.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.6.1.5 |
hh3cEponUniPortPolicyInboundBucketDepthThe inbound depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.6.1.6 |
hh3cEponUniPortPolicyInboundExtraBurstThe inbound extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.6.1.7 |
hh3cEponUniPortPolicyOutboundCirThe outbound committed information rate, stepped by 64, measured in kbps.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.6.1.8 |
hh3cEponUniPortPolicyOutboundPirThe outbound peak information rate, stepped by 64, measured in kbps.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.6.1.9 |
hh3cEponUniMulticastTableUNI multicast configuration. SEQUENCE OF Hh3cEponUniMulticastEntry .1.3.6.1.4.1.25506.2.42.5.1.7 |
hh3cEponUniMulticastEntryThe entry of hh3cEponUniPortPolicyTable. Hh3cEponUniMulticastEntry .1.3.6.1.4.1.25506.2.42.5.1.7.1 |
hh3cEponUniMulticastGroupNumberThe allowed multicast group number that can be handled at the same time by UNI.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.7.1.1 |
hh3cEponUniMulticastVlanListThe multicast vlan list. The first two octets of the string represent the first VLAN ID; the second two octets of the string represent the second VLAN ID, and so on. It is a zero length string by default.rw OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.7.1.2 |
hh3cEponUniMulticastStripStatustrue - strip the vlan tag of multicast packet. false - does not strip the vlan tag of multicast packet.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.7.1.3 |
hh3cEponUniMulticastFastleavetrue(1) - fast leave of IGMP enable on ONU. false(2) - fast leave of IGMP disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.7.1.4 |
hh3cEponUniTechAbilityTableUNI multicast configuration. SEQUENCE OF Hh3cEponUniTechAbilityEntry .1.3.6.1.4.1.25506.2.42.5.1.8 |
hh3cEponUniTechAbilityEntryThe entry of hh3cEponUniTechAbilityTable. Hh3cEponUniTechAbilityEntry .1.3.6.1.4.1.25506.2.42.5.1.8.1 |
hh3cEponUniLocalTechAbilityThe local port capabilities of the UNI. Each two octets stand for a capability of UNI: the first two octets represent one capability and the second two octets represent another capability, and so on. The capabilities list: 1 - undefined, 2 - initializing, true ability not yet known, 14 - 10BASE-T, 142 - full duplex 10BASE-T, 23 - 100BASE-T4, 25 - 100BASE-TX, 252 - full duplex 100BASE-TX, 312 - PAUSE operation for full duplex links, 313 - asymmetric PAUSE operation for full duplex links, 314 - symmetric PAUSE operation for full duplex links, 32 - 100BASE-T2, 322 - full duplex 100BASE-T2, 36 - 1000BASE-X, 362 - full duplex 1000BASE-X, 40 - 1000BASE-T UTP PHY, 402 - full duplex 1000BASE-T UTP PHY, 37 - remote fault bit 1(RF1), 372 - remote fault bit 2(RF2), 8029 - 802.9ISLAN-16T.ro OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.8.1.1 |
hh3cEponUniAdvertisedTechAbilityThe advertised port capabilities of the UNI. The capabilities list references the description of hh3cEponUniLocalTechAbility.ro OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.8.1.2 |
hh3cEponUniMulticastControlTableUNI multicast control parameters. SEQUENCE OF Hh3cEponUniMulticastControlEntry .1.3.6.1.4.1.25506.2.42.5.1.9 |
hh3cEponUniMulticastControlEntryThe entry of the table hh3cEponUniMulticastControlTable. Hh3cEponUniMulticastControlEntry .1.3.6.1.4.1.25506.2.42.5.1.9.1 |
hh3cEponUniMulticastVlanIndexThe multicast vlan ID.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.9.1.1 |
hh3cEponUniMulticastAddressListThe multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.rw OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.9.1.2 |
hh3cEponUniMulticastAccessRuledeny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.9.1.3 |
hh3cEponUniMulticastChannelLimitThe limitation of multicast preview channel number.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.9.1.4 |
hh3cEponUniMulticastPreTimeSliceThe time slice of multicast preview.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.9.1.5 |
hh3cEponUniMulticastPreTimesThe number of multicast preview times.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.9.1.6 |
hh3cEponUniMulticastPreIntervalThe interval between two consecutive previews, measured in minute.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.9.1.7 |
hh3cEponUniMulticastRowStatusThe status of this table entry. The active, createAndGo and the destory statuses are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.9.1.8 |
hh3cEponUniMulticastIndexThe index of the entry. INTEGER .1.3.6.1.4.1.25506.2.42.5.1.9.1.9 |
hh3cEponUniMulticastSourceIpListThis list contains many source ip addresses. Each ip address is contained in four octets.rw OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.9.1.10 |
hh3cEponUniMulticastResetIntervalThe interval is measured in minute. From the last preview limitation is reached, a customer can preview again after this interval is expired.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.9.1.11 |
hh3cEponUniQosIndexNextTableThe next index table. SEQUENCE OF Hh3cEponUniQosIndexNextEntry .1.3.6.1.4.1.25506.2.42.5.1.10 |
hh3cEponUniQosIndexNextEntryThe entry of the table hh3cEponUniQosIndexNextTable. Hh3cEponUniQosIndexNextEntry .1.3.6.1.4.1.25506.2.42.5.1.10.1 |
hh3cEponUniQosConfIndexNextThis object contains an appropriate value to be used for hh3cEponUniQosConfIndex when creating rows in the hh3cEponUniQosConfTable.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.10.1.1 |
hh3cEponUniQosConfTableUNI Qos configuration. SEQUENCE OF Hh3cEponUniQosConfEntry .1.3.6.1.4.1.25506.2.42.5.1.11 |
hh3cEponUniQosConfEntryThe entry of the table hh3cEponUniQosConfTable. Hh3cEponUniQosConfEntry .1.3.6.1.4.1.25506.2.42.5.1.11.1 |
hh3cEponUniQosConfIndexThe rule index. Integer32 .1.3.6.1.4.1.25506.2.42.5.1.11.1.1 |
hh3cEponUniQosConfRuleIndexNextThis object contains an appropriate value to be used for hh3cEponUniQosRuleIndex when creating rows in the hh3cEponUniQosRuleTable.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.11.1.2 |
hh3cEponUniQosConfMappedQueueThe queue that the ethernet frames will be mapped.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.11.1.3 |
hh3cEponUniQosConfMarkedPriorityPriority of the ethernet frames to be marked, which compliant with the 802.1D user priority standard.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.11.1.4 |
hh3cEponUniQosConfRowStatusThe status of this table entry. The active, createAndGo and the destory statuses are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.11.1.5 |
hh3cEponUniQosRuleTableQos sub rule of the UNI. SEQUENCE OF Hh3cEponUniQosRuleEntry .1.3.6.1.4.1.25506.2.42.5.1.12 |
hh3cEponUniQosRuleEntryThe entry of the table hh3cEponUniQosRuleTable. Hh3cEponUniQosRuleEntry .1.3.6.1.4.1.25506.2.42.5.1.12.1 |
hh3cEponUniQosRuleIndexThe sub rule index. Integer32 .1.3.6.1.4.1.25506.2.42.5.1.12.1.1 |
hh3cEponUniQosRuleSelectorThe ethernet frame selector. dstmac - based on destination MAC address. srcmac - based on source MAC address. ethernetpriority - based on ethernet priority. vlanid - based on VLAN ID. ethernettype - based on ethernet type. dstip - based on destination IP address. srcip - based on source IP address. ipprototype - based on IP type(ipv4 or ipv6). ipv4tosdscp - based on IP TOS/DSCP. ipv6 - based IP precedence. srcport - based on layer 4 source port. dstport - based on layer 4 destination port.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.12.1.2 |
hh3cEponUniQosRuleValueThe rule value based on the hh3cEponUniQosRuleSelector.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.12.1.3 |
hh3cEponUniQosRuleMacAddressMAC Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.12.1.4 |
hh3cEponUniQosRuleOperatornervermatch - value never match. equal - field equal to the value. notequal - field not equal to the value. lessthanequal - field less than or equal to the value. greaterthanequal - field greater than or equal to the value. fieldexist - value is ignored if field exists. fieldnotexist - value is ignored if field does not exist. alwaysmatch - value always match.rw Enumeration .1.3.6.1.4.1.25506.2.42.5.1.12.1.5 |
hh3cEponUniQosRuleRowStatusThe status of this table entry. Only active, createAndGo and the destory are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.12.1.6 |
hh3cEponUniMirrorGroupTableQos sub rule of the UNI. SEQUENCE OF Hh3cEponUniMirrorGroupEntry .1.3.6.1.4.1.25506.2.42.5.1.13 |
hh3cEponUniMirrorGroupEntryThe entry of the hh3cEponUniMirrorGroupTable. Hh3cEponUniMirrorGroupEntry .1.3.6.1.4.1.25506.2.42.5.1.13.1 |
hh3cEponUniMirrorGroupIDEpon UNI mirror group ID. Integer32 .1.3.6.1.4.1.25506.2.42.5.1.13.1.1 |
hh3cEponUniMirrorInboundPortListUNI inbound port list. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered UNI, and the least significant bit represents the lowest numbered UNI. Thus, each UNI port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is allowed in the set of ports. the port is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.13.1.2 |
hh3cEponUniMirrorOutboundPortListUNI outnbound port list, more infomation reference hh3cEponUniMirrorInboundPortListrw OCTET STRING .1.3.6.1.4.1.25506.2.42.5.1.13.1.3 |
hh3cEponUniMonitorPortUNI monitor port.rw Integer32 .1.3.6.1.4.1.25506.2.42.5.1.13.1.4 |
hh3cEponUniMirrorRowStatusRowStatus, Now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.5.1.13.1.5 |
hh3cEponUniMirrorGroupIdNextTableThe next index table, which is used by hh3cEponUniMirrorGroupTable. SEQUENCE OF Hh3cEponUniMirrorGroupIdNextEntry .1.3.6.1.4.1.25506.2.42.5.1.14 |
hh3cEponUniMirrorGroupIdNextEntryThe entry of the table hh3cEponUniMirrorGroupIdNextEntry. Hh3cEponUniMirrorGroupIdNextEntry .1.3.6.1.4.1.25506.2.42.5.1.14.1 |
hh3cEponUniMirrorGroupIDNextThis object contains an appropriate value to be used for hh3cEponUniMirrorGroupID when creating rows in the hh3cEponUniMirrorGroupTable.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.14.1.1 |
hh3cEponUniMulticastCtrlInfoTableUNI multicast information which is active . SEQUENCE OF Hh3cEponUniMulticastCtrlInfoEntry .1.3.6.1.4.1.25506.2.42.5.1.15 |
hh3cEponUniMulticastCtrlInfoEntryThe entry of the table hh3cEponUniMulticastCtrlInfoTable. Hh3cEponUniMulticastCtrlInfoEntry .1.3.6.1.4.1.25506.2.42.5.1.15.1 |
hh3cEponUniMultActVlanThe multicast vlan ID which is active. Integer32 .1.3.6.1.4.1.25506.2.42.5.1.15.1.1 |
hh3cEponUniMultActAddressThe multicast address which is active. IpAddress .1.3.6.1.4.1.25506.2.42.5.1.15.1.2 |
hh3cEponUniMultActAccessRuledeny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions.ro Enumeration .1.3.6.1.4.1.25506.2.42.5.1.15.1.3 |
hh3cEponUniMultActPreTimesThe number of multicast preview times which is active.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.15.1.4 |
hh3cEponUniMultActPreRemainThe remanent time slice of multicast preview which is active.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.15.1.5 |
hh3cEponUniMulticastIndexNextTableThe next index table, which is used by hh3cEponUniMulticastControlTable. SEQUENCE OF Hh3cEponUniMulticastIndexNextEntry .1.3.6.1.4.1.25506.2.42.5.1.16 |
hh3cEponUniMulticastIndexNextEntryThe entry of the table hh3cEponUniMulticastIndexNextEntry. Hh3cEponUniMulticastIndexNextEntry .1.3.6.1.4.1.25506.2.42.5.1.16.1 |
hh3cEponUniMulticastConfIndexNextThis object contains an appropriate value to be used for hh3cEponUniMulticastIndex when creating rows in the hh3cEponUniMulticastControlTable.ro Integer32 .1.3.6.1.4.1.25506.2.42.5.1.16.1.1 |
hh3cEponUniTrap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.5.2 |
hh3cEponUniTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.5.2.0 |
hh3cEponUniLinkUpTrapA hh3cEponUniLinkUpTrap notification is sent when the UNI up event is detected and the transmitting switch is turned on. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.42.5.2.0.1 |
hh3cEponUniLinkDownTrapA hh3cEponUniLinkDownTrap notification is sent when the UNI down event is detected and the transmitting switch is turned on. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.42.5.2.0.2 |
hh3cEponUniLoopBackDetectedTrapA hh3cEponUniLoopBackDetectedTrap notification is sent when the UNI loopback event is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.42.5.2.0.3 |
hh3cEponUniLoopBackRecoveredTrapA hh3cEponUniLoopBackRecoveredTrap notification is sent when the UNI loopback is recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.42.5.2.0.4 |