HH3C-EPON-DEVICE-MIB
The objects in this MIB module are used to manage Ethernet Passive Optical Network (EPON) devices which are based on the Ethernet in the First Mile (EFM) PON as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65. This MIB is excerpted from the draft files directly,only changed the object name,added the hh3c as prefix. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2mP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45,'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices.
Main OID:
hh3cEponDeviceMIB.1.3.6.1.4.1.25506.2.42.4
97
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
97 total| Object Name |
|---|
hh3cEponDeviceMIBThe objects in this MIB module are used to manage Ethernet Passive Optical Network (EPON) devices which are based on the Ethernet in the First Mile (EFM) PON as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65. This MIB is excerpted from the draft files directly,only changed the object name,added the hh3c as prefix. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2mP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45,'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.42.4 |
hh3cEponDeviceObjectMIB OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1 |
hh3cEponDeviceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.1 |
hh3cEponDeviceControlObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.1.1 |
hh3cEponDeviceControlTableTable for EPON device MIB modules. SEQUENCE OF Hh3cEponDeviceControlEntry .1.3.6.1.4.1.25506.2.42.4.1.1.1.1 |
hh3cEponDeviceControlEntryAn entry in the EPON device Control table. Hh3cEponDeviceControlEntry .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1 |
hh3cEponDeviceObjectResetThis variable is used to reset the EPON device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the EPON device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.rw Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.1 |
hh3cEponDeviceObjectModesThis variable defines the mode of the EPON device. When an olt(1) it is an Optical Line Terminal device (server) and when an onu(2) and Optical Network Unit device (client)ro Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.2 |
hh3cEponDeviceObjectFecEnabledThis variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the device does not support FEC mode When fecTxEnabled(2) the device supports the FEC transmission mode. When fecRxEnabled(3) the device supports the FEC Receive mode. When fecTxRxEnabled(4) the device supports the FEC transmission and receive mode. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.rw Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.4 |
hh3cEponDeviceObjectOamModeThis variable defines and provides information on the Operation Administration and Maintenance (OAM) mode of an EPON device as defined by the [802.3ah] clause 57. When noOam(1) the device does not supports the OAM mode. When oamServer(2) the device supports the OAM mode as a server unit. When oamClient(3) the device supports the OAM mode as a client unit. Writing can be done during initialization, hh3cEponDeviceObjectDeviceReadyMode is in notReady(1) or inProcess(2). This attribute is relevant for an OLT and an ONU.rw Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.5 |
hh3cEponDeviceObjectDeviceReadyModeThis variable defines the mode of an EPON device and provides information on the mode in initialization - ready for registration as defined by the [802.3ah] clause 64. When notReady(1) the device is not ready for operation. When inProcess(2) the device is in initialization process. When ready(3) the device is ready for registration. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.rw Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.6 |
hh3cEponDeviceObjectPowerDownSetting this variable to True(1) will cause Device to be entered into Power down mode where no registration is allowed and only receiving data from the link. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.7 |
hh3cEponDeviceObjectNumberOfLLIDsA read only variable which defines the number of registered LLIDs (as defined by the [802.3ah] clause 65) in a EPON network for an OLT and an ONU. Initialization value is 0. This attribute is relevant for an OLT and an ONU.ro Integer32 .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.8 |
hh3cEponDeviceObjectReportThresholdA set of 8 integers, for each LLID, that defines the threshold reporting for each Queue in the REPORT message, as defined in [802.3ah] 64. First Queue set reporting will provide information on the queue occupancy of frames below this Threshold. The value returned shall be in Time quanta (TQ) which is 16nsec or 2 octets increments. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.rw Integer32 UNITS "TQ (16nsec)" .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.9 |
hh3cEponDeviceRemoteMACAddressLLIDControlIndicates and controls the resetting of the LLID MAC address log. Setting this object to none(1) has no action resetLog(2) empties the LLID MAC address log. All data is deleted. Setting it to useDefaultReporting(3) returns all entries priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(3).rw Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.1.1.1.10 |
hh3cEponDeviceRemoteMACAddressLLIDTableA table of read-only value that identifies the source_address and LLIDs parameter of the remote devices in the network. This MacAddress value, as defined in [802.3ah], 30.3.5.1.5, is updated on reception of a valid frame with a unicast destination Field or (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3ah] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3ah] Annex 31A. (3)an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3ah] Annex 31A, and an LLID as allocated by the OLT. The table is defined as Remote MAC address - LLID (RMadL) The table is relevant only for an OLT device, and is equivalent from a bridge emulation to the bridge port-MAC address table where the LLIDs are equivalent to virtual bridge ports. SEQUENCE OF Hh3cEponDeviceRemoteMACAddressLLIDEntry .1.3.6.1.4.1.25506.2.42.4.1.1.1.2 |
hh3cEponDeviceRemoteMACAddressLLIDEntryA group of entries. Applications create and delete entries using hh3cEponDeviceRMadlEntryStatus. When adding objects to an LLID they are added in the persistent order of their index in this table. Hh3cEponDeviceRemoteMACAddressLLIDEntry .1.3.6.1.4.1.25506.2.42.4.1.1.1.2.1 |
hh3cEponDeviceRemoteMACAddressLLIDNameA locally-unique, administratively assigned name for a group of entries.rw SnmpAdminString .1.3.6.1.4.1.25506.2.42.4.1.1.1.2.1.1 |
hh3cEponDeviceRMadlLLIDAn arbitrary integer for the purpose of identifying the LLID. Writing can be done all the time.rw Unsigned32 .1.3.6.1.4.1.25506.2.42.4.1.1.1.2.1.2 |
hh3cEponDeviceRMadlLogIDThe object identifier of a MIB module object to add to an entry, indicating the entry ID in the table. Writing can be done all the time.rw OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.1.1.2.1.3 |
hh3cEponDeviceRMadlRemoteAddressThe remote MAC address of the LLID. Writing can be done all the time.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.1.2.1.4 |
hh3cEponDeviceRMadlTypeA list of types for entries - LLIDs. Indicates and defines the state of registration. notRegister(1) marks a non registered LID, registered(2) marks a registered LLID. Writing can be done all the time.rw Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.1.2.1.5 |
hh3cEponDeviceRMadlActionA list of actions for an entry - LLID. Indicates and defines the state of registration for the remote device. none(1) marks no action, register(2) marks to register an LLID, deregister(3) marks to deregister an LLID, reregister(4) marks reregistered LLID. Writing can be done all the time.rw Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.1.2.1.6 |
hh3cEponDeviceRMadlEntryStatusThe control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.1.2.1.7 |
hh3cEponDeviceStatObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.1.2 |
hh3cEponDeviceStatTableThis table defines the list of statistics counters of EPON devices. The attributes are relevant for an OLT and an ONU. SEQUENCE OF Hh3cEponDeviceStatEntry .1.3.6.1.4.1.25506.2.42.4.1.1.2.1 |
hh3cEponDeviceStatEntryTable entries for Table of statistics counters of EPON devices. Hh3cEponDeviceStatEntry .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1 |
hh3cEponDeviceStatTxFramesQueue0A count of the number of times a -Queue-0- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.1 |
hh3cEponDeviceStatTxFramesQueue1A count of the number of times a -Queue-1- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.2 |
hh3cEponDeviceStatTxFramesQueue2A count of the number of times a -Queue-2- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.3 |
hh3cEponDeviceStatTxFramesQueue3A count of the number of times a -Queue-3- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.4 |
hh3cEponDeviceStatTxFramesQueue4A count of the number of times a -Queue-4- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.5 |
hh3cEponDeviceStatTxFramesQueue5A count of the number of times a -Queue-5- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.6 |
hh3cEponDeviceStatTxFramesQueue6A count of the number of times a -Queue-6- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.7 |
hh3cEponDeviceStatTxFramesQueue7A count of the number of times a -Queue-7- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.8 |
hh3cEponDeviceStatRxFramesQueue0A count of the number of times a -Queue-0- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.9 |
hh3cEponDeviceStatRxFramesQueue1A count of the number of times a -Queue-1- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.10 |
hh3cEponDeviceStatRxFramesQueue2A count of the number of times a -Queue-2- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.11 |
hh3cEponDeviceStatRxFramesQueue3A count of the number of times a -Queue-3- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.12 |
hh3cEponDeviceStatRxFramesQueue4A count of the number of times a -Queue-4- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.13 |
hh3cEponDeviceStatRxFramesQueue5A count of the number of times a -Queue-5- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.14 |
hh3cEponDeviceStatRxFramesQueue6A count of the number of times a -Queue-6- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.15 |
hh3cEponDeviceStatRxFramesQueue7A count of the number of times a -Queue-7- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.16 |
hh3cEponDeviceStatDroppedFramesQueue0A count of the number of times a -Queue-0- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.17 |
hh3cEponDeviceStatDroppedFramesQueue1A count of the number of times a -Queue-1- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.18 |
hh3cEponDeviceStatDroppedFramesQueue2A count of the number of times a -Queue-2- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.19 |
hh3cEponDeviceStatDroppedFramesQueue3A count of the number of times a -Queue-3- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.20 |
hh3cEponDeviceStatDroppedFramesQueue4A count of the number of times a -Queue-4- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.21 |
hh3cEponDeviceStatDroppedFramesQueue5A count of the number of times a -Queue-5- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.22 |
hh3cEponDeviceStatDroppedFramesQueue6A count of the number of times a -Queue-6- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.23 |
hh3cEponDeviceStatDroppedFramesQueue7A count of the number of times a -Queue-7- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.ro Counter32 UNITS "frames" .1.3.6.1.4.1.25506.2.42.4.1.1.2.1.1.24 |
hh3cEponDeviceEventObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.1.3 |
hh3cEponDeviceEventObjectTableThis table defines the Event Objects for EPON devices. The attributes are relevant for an OLT and an ONU. SEQUENCE OF Hh3cEponDeviceEventObjectEntry .1.3.6.1.4.1.25506.2.42.4.1.1.3.1 |
hh3cEponDeviceEventObjectEntryTable entries for Table of Event objects for EPON devices. Hh3cEponDeviceEventObjectEntry .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1 |
hh3cEponDeviceSampleMinimumThe minimum Frequency of events this system will accept. A system may use the larger values of this minimum to lessen the impact of constant sampling. For larger sampling intervals the system samples less often and suffers less overhead. Unless explicitly resource limited, a system's value for this object SHOULD be 1, allowing as small as a 1 second interval for ongoing trigger sampling. Writing of the value can be done all the time.rw Integer32 .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.1 |
hh3cEponDeviceDyingGaspAlarmStateA read-only variable, which defines the state of the Dying Gasp indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a dying gasp alarm asserted. When false the dying gasp alarm is resetro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.2 |
hh3cEponDeviceDyingGaspAlarmEnabledA control to allow DyingGaspAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.3 |
hh3cEponDeviceCriticalEventStateA read-only variable, which defines the state of the Critical Event indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Critical Event asserted. When false the Critical Event is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.4 |
hh3cEponDeviceCriticalEventEnabledA control to allow CriticalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.5 |
hh3cEponDeviceLocalLinkFaultAlarmStateA read-only variable, which defines the state of the Local Link Fault indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Local Link Fault alarm asserted. When false the Local Link Fault alarm is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.6 |
hh3cEponDeviceLocalLinkFaultAlarmEnabledA control to allow LocalLinkFaultAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.7 |
hh3cEponDeviceTemperatureEventIndicationStateA read-only variable, which defines the state of the Temperature Event indication of an EPON device. When condition of box temperature is above the threshold defined the alarm is asserted. When the condition is below that threshold the alarm is de-asserted. When true the device has a Temperature Event Indication asserted. When false the Temperature Event Indication is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.8 |
hh3cEponDeviceTemperatureEventIndicationEnabledA control to allow TemperatureEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.9 |
hh3cEponDevicePowerVoltageEventIndicationStateA read-only variable, which defines the state of the Power/Voltage Event Indication of an EPON device. When condition of box Power/voltage is above the threshold defined the alarm is asserted. When the condition is below that threshold the alarm is de-asserted. When true the device has a Power/Voltage Event Indication asserted. When false the Power/Voltage Event Indication is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.10 |
hh3cEponDevicePowerVoltageEventIndicationEnabledA control to allow PowerVoltageEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.11 |
hh3cEponDeviceGlobalEventStateA read-only variable, which defines the state of the Global Event indication of an EPON device. When the indication of the event input occurs the event is asserted. When the input is removed that event is de-asserted. When true the device has a Global Event asserted. When false the Global Event Indication is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.12 |
hh3cEponDeviceGlobalEventEnabledA control to allow GlobalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.13 |
hh3cEponDeviceErroredSymbolPeriodEventStateA read-only variable, which defines the state of the Errored Symbol Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Symbol Period Event asserted. When false the Errored Symbol Period Event is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.14 |
hh3cEponDeviceErroredSymbolPeriodEventEnabledA control to allow ErroredSymbolPeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.15 |
hh3cEponDeviceErroredFrameEventStateA read-only variable, which defines the state of the Errored Frame Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Event asserted. When false the Errored Frame Event is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.16 |
hh3cEponDeviceErroredFrameEventEnabledA control to allow ErroredFrameEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.17 |
hh3cEponDeviceErroredFramePeriodEventStateA read-only variable, which defines the state of the Errored Frame Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Period Event asserted. When false the Errored Frame Period Event is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.18 |
hh3cEponDeviceErroredFramePeriodEventEnabledA control to allow ErroredFramePeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.19 |
hh3cEponDeviceErroredFrameSecondsSummaryEventStateA read-only variable, which defines the state of the Errored Frame Seconds Summary Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Seconds Summary Event asserted. When false the Errored Frame Seconds Summary Event is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.20 |
hh3cEponDeviceErroredFrameSecondsSummaryEventEnabledA control to allow ErroredFrameSecondsSummaryEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.21 |
hh3cEponDeviceOrganizationSpecificEventStateA read-only variable, which defines the state of the Organization Specific Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Organization Specific Event asserted. When false the Organization Specific Event is reset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.22 |
hh3cEponDeviceOrganizationSpecificEventEnabledA control to allow OrganizationSpecificEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.23 |
hh3cEponDeviceEventControlIndicates and controls the resetting of the Event log. Setting this object to none(1) has no action resetLog(2) empties the event log. All data is deleted. Setting it to useDefaultReporting(3) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(3).rw Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.3.1.1.24 |
hh3cEponDeviceEventsLogTableA table of objects provides a log of notification based on the event as pointed to by entries in those tables. The intent is a MAC level event log (set of events to when they happened). This attribute is relevant for an OLT and an ONU. SEQUENCE OF Hh3cEponDeviceEventsLogEntry .1.3.6.1.4.1.25506.2.42.4.1.1.3.2 |
hh3cEponDeviceEventsLogEntryA group of Events. Applications create and delete entries using hh3cEponDeviceEventsEntryStatus. When adding objects to a notification they are added in the lexical order of their index in this table. Hh3cEponDeviceEventsLogEntry .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1 |
hh3cEponDeviceEventsLogNameA locally-unique, administratively assigned name for a group of Events. SnmpAdminString .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1.1 |
hh3cEponDeviceEventsLogIndexAn arbitrary integer for the purpose of identifying individual Events within a hh3cEponDeviceEventsLogName group. Events within a group are placed in the notification in the numerical order of this index. Unsigned32 .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1.2 |
hh3cEponDeviceEventsLogIDThe object identifier of a MIB module object to add to a Notification that results from the event. Writing can be done all the time.rw OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1.3 |
hh3cEponDeviceEventsLogFirstTimeThe time that an entry was created.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1.4 |
hh3cEponDeviceEventsLogLastTimeIf multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as hh3cEponDeviceEventsLogFirstTime.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1.5 |
hh3cEponDeviceEventsLogCountsThe number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplicate event.ro Counter32 .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1.6 |
hh3cEponDeviceEventsLogTypeA list of types for Events. Events are ordered according to their significance where 1 is the highest severity. hh3cEponDeviceDyingGaspAlarmState(1) indicates a Dying Gasp Alarm State, hh3cEponDeviceCriticalEventState(2) indicates a Critical Event State, hh3cEponDeviceLocalLinkFaultAlarmState(3) indicates a Local Link Fault Alarm State, hh3cEponDeviceTemperatureEventIndicationState(4) indicates a Temperature Event Indication State, hh3cEponDevicePowerVoltageEventIndicationState(5) indicates a Power Voltage Event Indication State, hh3cEponDeviceGlobalEventState(6) indicates a Global Event State, hh3cEponDeviceErroredSymbolPeriodEventState(7) indicates an Errored Symbol Period Event State, hh3cEponDeviceErroredFrameEventState(8) indicates an Errored Frame Event State, hh3cEponDeviceErroredFramePeriodEventState(9) indicates an Errored Frame Period Event State, hh3cEponDeviceErroredFrameSecondsSummaryEventState(10) indicates an Errored Frame Seconds Summary Event State, hh3cEponDeviceOrganizationSpecificEventState(11) indicates an Organization Specific Event State.ro Enumeration .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1.7 |
hh3cEponDeviceEventsLogEntryStatusThe control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.42.4.1.1.3.2.1.8 |
hh3cEponDeviceConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.2 |
hh3cEponDeviceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.2.1 |
hh3cEponDeviceGroupControlA collection of objects of hh3cEponDevice control definition. Unknown .1.3.6.1.4.1.25506.2.42.4.1.2.1.1 |
hh3cEponDeviceGroupRMadLTableA collection of objects of hh3cEponDevice remote Mac address to LLID table. Unknown .1.3.6.1.4.1.25506.2.42.4.1.2.1.2 |
hh3cEponDeviceGroupStatA collection of objects of EPON device Statistics Unknown .1.3.6.1.4.1.25506.2.42.4.1.2.1.3 |
hh3cEponDeviceGroupEventA collection of objects for EPON device Events Unknown .1.3.6.1.4.1.25506.2.42.4.1.2.1.4 |
hh3cEponDeviceGroupEventLogA collection of objects for EPON device Events log Unknown .1.3.6.1.4.1.25506.2.42.4.1.2.1.5 |
hh3cEponDeviceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.42.4.1.2.2 |
hh3cEponDeviceComplianceThe compliance statement for EPON Devices. Unknown .1.3.6.1.4.1.25506.2.42.4.1.2.2.1 |