HH3C-DSP-MIB
This MIB is to provide the definition of the DSP(Digital Signal Processing) status.
Main OID:
hh3cDSP.1.3.6.1.4.1.25506.2.89
22
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
hh3cDSPThis MIB is to provide the definition of the DSP(Digital Signal Processing) status. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.89 |
hh3cVPMStatusTableThe table contains status parameters of VPM(Voice Process Module) card. SEQUENCE OF Hh3cVPMStatusEntry .1.3.6.1.4.1.25506.2.89.1 |
hh3cVPMStatusEntryThe entry of VPM status table. Hh3cVPMStatusEntry .1.3.6.1.4.1.25506.2.89.1.1 |
hh3cVPMIndexThe index for this entry. The sequence of VPM card in the chassis is from the top to bottom.ro Integer32 .1.3.6.1.4.1.25506.2.89.1.1.1 |
hh3cVPMEnPhysicalIndexThe object corresponds to PhysicalIndex in the chassis.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.25506.2.89.1.1.2 |
hh3cVPMStateThe object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state.ro Enumeration .1.3.6.1.4.1.25506.2.89.1.1.3 |
hh3cVPMResourceUtilizationThe object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources.ro Integer32 .1.3.6.1.4.1.25506.2.89.1.1.4 |
hh3cVPMHiWaterUtilizationThe object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.ro Integer32 .1.3.6.1.4.1.25506.2.89.1.1.5 |
hh3cVPMMaxChannelThe maximum number of channels can be supported in each VPM card.ro Integer32 .1.3.6.1.4.1.25506.2.89.1.1.6 |
hh3cDSPStatusTableThe table contains status parameters of DSP(Digital Signal Processing) card. SEQUENCE OF Hh3cDSPStatusEntry .1.3.6.1.4.1.25506.2.89.2 |
hh3cDSPStatusEntryThe entry of DSP status table. Hh3cDSPStatusEntry .1.3.6.1.4.1.25506.2.89.2.1 |
hh3cDSPIndexThe index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.ro Integer32 .1.3.6.1.4.1.25506.2.89.2.1.1 |
hh3cDSPVPMIndexThe object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card.ro Integer32 .1.3.6.1.4.1.25506.2.89.2.1.2 |
hh3cDSPEnPhysicalIndexThe object corresponds to PhysicalIndex in the chassis.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.25506.2.89.2.1.3 |
hh3cDSPResetTimeThe value of sysUpTime from the last DSP reset occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.25506.2.89.2.1.4 |
hh3cDSPMaxChannelThe maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.ro Integer32 .1.3.6.1.4.1.25506.2.89.2.1.5 |
hh3cDSPStateThe object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state.ro Enumeration .1.3.6.1.4.1.25506.2.89.2.1.6 |
hh3cDSPInUseChannelThe number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection.ro Integer32 .1.3.6.1.4.1.25506.2.89.2.1.7 |
hh3cDSPTrap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.89.3 |
hh3cDSPTrapPrex OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.89.3.0 |
hh3cVPMStateChangeThis trap is sent when VPM state changes. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.89.3.0.1 |
hh3cDSPStateChangeThis trap is sent when DSP state changes. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.89.3.0.2 |