HH3C-DOT11S-MESH-MIB
The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs.
Main OID:
hh3cDot11sMesh.1.3.6.1.4.1.25506.2.75.11
88
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
88 total| Object Name |
|---|
hh3cDot11sMeshThe file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.75.11 |
hh3cDot11sConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.11.1 |
hh3cDot11sMeshGlobalPara OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.11.1.1 |
hh3cDot11sMeshMkdIDThis object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.1.1 |
hh3cDot11sMeshPflTableThis table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except hh3cDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio. SEQUENCE OF Hh3cDot11sMeshPflEntry .1.3.6.1.4.1.25506.2.75.11.1.2 |
hh3cDot11sMeshPflEntryEach entry contains information of a mesh profile. Hh3cDot11sMeshPflEntry .1.3.6.1.4.1.25506.2.75.11.1.2.1 |
hh3cDot11sMeshPflIndexThis object represents the index of the mesh profile. Integer32 .1.3.6.1.4.1.25506.2.75.11.1.2.1.1 |
hh3cDot11sMeshPflMeshIDThis object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, hh3cDot11sMeshPflEnable can not be set to 'true'.rw OCTET STRING .1.3.6.1.4.1.25506.2.75.11.1.2.1.2 |
hh3cDot11sMeshPflBindIntNumThis object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of hh3cDot11sMeshPflEnable can not be set to 'true'.rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.2.1.3 |
hh3cDot11sMeshPflKeepAliveThis object represents the mesh link keep-alive interval.rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.2.1.4 |
hh3cDot11sMeshPflBackhaulRateThis object represents the link backhaul rate.rw Integer32 UNITS "Kbps" .1.3.6.1.4.1.25506.2.75.11.1.2.1.5 |
hh3cDot11sMeshMkdServEnableThis object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.2.1.6 |
hh3cDot11sMeshPflEnableThis object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.2.1.7 |
hh3cDot11sMeshPflRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.2.1.8 |
hh3cDot11sMpPlcyTableThis table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio. SEQUENCE OF Hh3cDot11sMpPlcyEntry .1.3.6.1.4.1.25506.2.75.11.1.3 |
hh3cDot11sMpPlcyEntryEach entry contains information of a MP policy. Hh3cDot11sMpPlcyEntry .1.3.6.1.4.1.25506.2.75.11.1.3.1 |
hh3cDot11sMpPlcyIndexThis object represents the MP policy index. Integer32 .1.3.6.1.4.1.25506.2.75.11.1.3.1.1 |
hh3cDot11sMpPlcyNameThis object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported.rw OCTET STRING .1.3.6.1.4.1.25506.2.75.11.1.3.1.2 |
hh3cDot11sMpPlcyInitEnableThis object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.3.1.3 |
hh3cDot11sMlspEnableThis object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.3.1.4 |
hh3cDot11sProbReqIntervalThis object represents the probe request interval.rw Integer32 UNITS "millisecond" .1.3.6.1.4.1.25506.2.75.11.1.3.1.5 |
hh3cDot11sRoleAuthEnableThis object indicates whether the device can play as the role of an authenticator.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.3.1.6 |
hh3cDot11sLinkHoldRSSIThis object represents the link-hold receive signal strength indicator (RSSI).rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.3.1.7 |
hh3cDot11sLinkHoldTimeThis object represents the link-hold time.rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.3.1.8 |
hh3cDot11sSwitchMarginThis object represents the link-switch margin.rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.3.1.9 |
hh3cDot11sLinkSaturationRSSIThis object represents the link saturation receive signal strength indicator (RSSI).rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.3.1.10 |
hh3cDot11sLinkRateModeThis object represents the rate mode of the mesh link.rw Enumeration .1.3.6.1.4.1.25506.2.75.11.1.3.1.11 |
hh3cDot11sMaxLinkNumThis object represents the maximum number of the mesh link.rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.3.1.12 |
hh3cDot11sMpPlcyRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.3.1.13 |
hh3cDot11sMlspCfgTableThis table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified. SEQUENCE OF Hh3cDot11sMlspCfgEntry .1.3.6.1.4.1.25506.2.75.11.1.4 |
hh3cDot11sMlspCfgEntryEach entry contains information of MLSP proxy MAC address. Hh3cDot11sMlspCfgEntry .1.3.6.1.4.1.25506.2.75.11.1.4.1 |
hh3cDot11sMlspProxyIndexThis object represents the MLSP proxy MAC address index. Integer32 .1.3.6.1.4.1.25506.2.75.11.1.4.1.1 |
hh3cDot11sMlspProxyMacThis object represents the MLSP proxy MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.4.1.2 |
hh3cDot11sMlspRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.4.1.3 |
hh3cDot11sRadioCfgTableThis table is used to configure mesh to the specified radio. SEQUENCE OF Hh3cDot11sRadioCfgEntry .1.3.6.1.4.1.25506.2.75.11.1.5 |
hh3cDot11sRadioCfgEntryEach entry contains mesh configure information of the specified radio. Hh3cDot11sRadioCfgEntry .1.3.6.1.4.1.25506.2.75.11.1.5.1 |
hh3cDot11sCfgRadioIndexRepresents index of the radio. Hh3cDot11RadioElementIndex (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.11.1.5.1.1 |
hh3cDot11sMeshPflMapThis object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile.rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.5.1.2 |
hh3cDot11sMpPlcyMapThis object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled.rw Integer32 .1.3.6.1.4.1.25506.2.75.11.1.5.1.3 |
hh3cDot11sAPCfgTableThis table is used to configure mesh to the specified AP. SEQUENCE OF Hh3cDot11sAPCfgEntry .1.3.6.1.4.1.25506.2.75.11.1.6 |
hh3cDot11sAPCfgEntryEach entry contains mesh configure information of the specified AP. Hh3cDot11sAPCfgEntry .1.3.6.1.4.1.25506.2.75.11.1.6.1 |
hh3cDot11sPortalEnableThis object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.1.6.1.1 |
hh3cDot11sWDSConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.11.2 |
hh3cDot11sWDSPeerMacTableThis table is used to configure wireless distribution system (WDS). The row of this table can not be modified. SEQUENCE OF Hh3cDot11sWDSPeerMacEntry .1.3.6.1.4.1.25506.2.75.11.2.1 |
hh3cDot11sWDSPeerMacEntryEach entry contains information of WDS. Hh3cDot11sWDSPeerMacEntry .1.3.6.1.4.1.25506.2.75.11.2.1.1 |
hh3cDot11sWDSPeerMacIndexThis object represents the peer MAC address index. Integer32 .1.3.6.1.4.1.25506.2.75.11.2.1.1.1 |
hh3cDot11sWDSPeerMacAddrssThis object represents the peer MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.2.1.1.2 |
hh3cDot11sWDSPeerMacRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.2.1.1.3 |
hh3cDot11sMeshStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.11.3 |
hh3cDot11sMeshLinkStatusTableThis table is used to represent the status of mesh link. SEQUENCE OF Hh3cDot11sMeshLinkStatusEntry .1.3.6.1.4.1.25506.2.75.11.3.1 |
hh3cDot11sMeshLinkStatusEntryEach entry contains status information of mesh link. Hh3cDot11sMeshLinkStatusEntry .1.3.6.1.4.1.25506.2.75.11.3.1.1 |
hh3cDot11sMeshLinkIfIndexThis object represents the interface index of the mesh link. Unsigned32 .1.3.6.1.4.1.25506.2.75.11.3.1.1.1 |
hh3cDot11sMeshLinkNameThis object represents the name of the mesh link.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.11.3.1.1.2 |
hh3cDot11sMeshLinkBSSIDThis object represents the BSS ID of the mesh link.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.3.1.1.3 |
hh3cDot11sMeshLinkPeerMacThis object represents the peer MAC address of the mesh link.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.3.1.1.4 |
hh3cDot11sMeshLinkExistDurationThis object represents the time for which the link has been up.ro Integer32 UNITS "second" .1.3.6.1.4.1.25506.2.75.11.3.1.1.5 |
hh3cDot11sMeshLinkTypeThis object represents the type for the link.ro Enumeration .1.3.6.1.4.1.25506.2.75.11.3.1.1.6 |
hh3cDot11sMeshLinkStatisTableThis table is used to represent the statistical information of mesh link. SEQUENCE OF Hh3cDot11sMeshLinkStatisEntry .1.3.6.1.4.1.25506.2.75.11.3.2 |
hh3cDot11sMeshLinkStatisEntryEach entry contains statistical information of mesh link. Hh3cDot11sMeshLinkStatisEntry .1.3.6.1.4.1.25506.2.75.11.3.2.1 |
hh3cDot11sMeshLinkStatIfIndexThis object represents the interface index of the mesh link. Unsigned32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.1 |
hh3cDot11sMeshLinkNbrIndexRepresents the neighbor index of the mesh link.ro Unsigned32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.2 |
hh3cDot11sMeshLinkRxTotByteRepresents the amount of bytes that the mesh link received.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.3 |
hh3cDot11sMeshLinkRxTotPktRepresents the amount of packets that the mesh link received.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.4 |
hh3cDot11sMeshLinkRxUniPktRepresents the amount of unicast packets that the mesh link received.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.5 |
hh3cDot11sMeshLinkRxBrocPktRepresents the amount of broadcast packets that the mesh link received.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.6 |
hh3cDot11sMeshLinkRxMuticPktRepresents the amount of multicast packets that the mesh link received.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.7 |
hh3cDot11sMeshLinkRxDiscPktRepresents the amount of packets that the mesh link discarded.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.8 |
hh3cDot11sMeshLinkTxTotByteRepresents the total amount of bytes that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.9 |
hh3cDot11sMeshLinkTxTotPktRepresents the total amount of packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.10 |
hh3cDot11sMeshLinkTxUniPktRepresents the amount of unicast packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.11 |
hh3cDot11sMeshLinkTxBrocPktRepresents the amount of broadcast packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.12 |
hh3cDot11sMeshLinkTxMuticPktRepresents the amount of multicast packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.13 |
hh3cDot11sMeshLinkTxDiscPktRepresents the amount of discarded packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.25506.2.75.11.3.2.1.14 |
hh3cDot11sMeshLinkIFNameRepresents the name of mesh link interface.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.11.3.2.1.15 |
hh3cDot11sMeshNbrStatusTableThis table represents the status information for the neighbors of MP. SEQUENCE OF Hh3cDot11sMeshNbrStatusEntry .1.3.6.1.4.1.25506.2.75.11.3.3 |
hh3cDot11sMeshNbrStatusEntryEach entry of the table will provide status information for the neighbors of MP. Hh3cDot11sMeshNbrStatusEntry .1.3.6.1.4.1.25506.2.75.11.3.3.1 |
hh3cDot11sMeshNbrIndexRepresents the index for the neighbor. Unsigned32 .1.3.6.1.4.1.25506.2.75.11.3.3.1.1 |
hh3cDot11sMeshNbrRadioIDRepresents the radio ID of the neighbor.ro Unsigned32 .1.3.6.1.4.1.25506.2.75.11.3.3.1.2 |
hh3cDot11sMeshLocalMeshIDRepresents the local mesh ID.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.11.3.3.1.3 |
hh3cDot11sMeshNbrMeshIDRepresents the mesh ID of the neighbor.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.11.3.3.1.4 |
hh3cDot11sMeshNbrBSSIDRepresents the BSS ID of the neighbor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.3.3.1.5 |
hh3cDot11sMeshNbrPeerMacRepresents the MAC address of the peer neighbor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.11.3.3.1.6 |
hh3cDot11sMeshLinkInMpRepresents the interface index of mesh link that used to connect with this neighbor.ro Unsigned32 .1.3.6.1.4.1.25506.2.75.11.3.3.1.7 |
hh3cDot11sMeshMPLinkStatusRepresents the status of mesh link that used to connect with this neighbor.ro Enumeration .1.3.6.1.4.1.25506.2.75.11.3.3.1.8 |
hh3cDot11sMeshNbrChannelRepresents the channel number used by this neighbor.ro Unsigned32 .1.3.6.1.4.1.25506.2.75.11.3.3.1.9 |
hh3cDot11sMeshNbrLinkDurationRepresents the duration of mesh link that used to connect with this neighbor.ro Integer32 UNITS "second" .1.3.6.1.4.1.25506.2.75.11.3.3.1.10 |
hh3cDot11sMeshNbrRSSIRepresents the RSSI of mesh link that used to connect with this neighbor.ro Integer32 .1.3.6.1.4.1.25506.2.75.11.3.3.1.11 |
hh3cDot11sMeshNbrSNRRepresents the SNR of mesh link that used to connect with this neighbor.ro Integer32 UNITS "percent" .1.3.6.1.4.1.25506.2.75.11.3.3.1.12 |