HH3C-DOT11-SA-MIB
AI MIB Summary
The HH3C-DOT11-SA-MIB enables monitoring of radio frequency spectrum analysis data on H3C wireless access points, specifically tracking interference sources, channel quality metrics, and packet transmission issues within the 2.4 GHz or 5 GHz bands. This module facilitates the identification of non-Wi-Fi noise and channel contention events to diagnose RF environment degradation and optimize Wi-Fi network performance.
This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel.
Main OID:
hh3cDot11Sa.1.3.6.1.4.1.25506.2.75.13
61
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
61 total| Object Name |
|---|
hh3cDot11SaThis MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.75.13 |
hh3cDot11SaCfgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.13.1 |
hh3cDot11SaCfgTableThis table is used to configure spectrum analysis. SEQUENCE OF Hh3cDot11SaCfgEntry .1.3.6.1.4.1.25506.2.75.13.1.1 |
hh3cDot11SaCfgEntryThis entry contains the spectrum analysis configuration. Hh3cDot11SaCfgEntry .1.3.6.1.4.1.25506.2.75.13.1.1.1 |
hh3cDot11SaCfgRadioTypeRepresents the radio type of the configuration. Enumeration .1.3.6.1.4.1.25506.2.75.13.1.1.1.1 |
hh3cDot11SaEnableRepresents whether spectrum analysis is enabled globally.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.13.1.1.1.2 |
hh3cDot11SaRptDevTypeRepresents which types of interference devices should be reported.rw Bits .1.3.6.1.4.1.25506.2.75.13.1.1.1.3 |
hh3cDot11SaTrapDevEnableRepresents whether the interference device trap is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.13.1.1.1.4 |
hh3cDot11SaTrapDevTypeRepresents which types of interference device will send traps when the interference device trap is enabled.rw Bits .1.3.6.1.4.1.25506.2.75.13.1.1.1.5 |
hh3cDot11SaTrapAQEnableRepresents whether the air quality trap is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.13.1.1.1.6 |
hh3cDot11SaTrapAQThresholdRepresents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent.rw Integer32 .1.3.6.1.4.1.25506.2.75.13.1.1.1.7 |
hh3cDot11SaDrivenRRMEnableConfigure whether to trigger RRM to run when an access point detects a certain level of interference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.13.1.1.1.8 |
hh3cDot11SaDrivenRRMSntConfigure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity.rw Enumeration .1.3.6.1.4.1.25506.2.75.13.1.1.1.9 |
hh3cDot11SaStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.13.2 |
hh3cDot11SaRtFFTDataTableThis table contains the real-time FFT data for spectrum analysis. SEQUENCE OF Hh3cDot11SaRtFFTDataEntry .1.3.6.1.4.1.25506.2.75.13.2.1 |
hh3cDot11SaRtFFTDataEntryThis entry contains the real-time FFT data for spectrum analysis. Hh3cDot11SaRtFFTDataEntry .1.3.6.1.4.1.25506.2.75.13.2.1.1 |
hh3cDot11SaAPIDRepresents the serial ID of the AP. Hh3cDot11ObjectIDType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.13.2.1.1.1 |
hh3cDot11SaRadioIDRepresents the ID of the radio. Hh3cDot11RadioScopeType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.13.2.1.1.2 |
hh3cDot11SaRtDataGroupIDRepresents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval. Integer32 .1.3.6.1.4.1.25506.2.75.13.2.1.1.3 |
hh3cDot11SaFrequencyRepresents the frequency number in 100 Hz. Integer32 .1.3.6.1.4.1.25506.2.75.13.2.1.1.4 |
hh3cDot11SaRtFreqPowerRepresents the power of the frequency point.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.1.1.5 |
hh3cDot11SaRtFreqMaxPowerRepresents the max power of the frequency point.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.1.1.6 |
hh3cDot11SaRtFreqDutyCycleRepresents the duty cycle of the frequency point.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.1.1.7 |
hh3cDot11SaRtFreqDataSeqNoRepresents the sequence number of the data.ro Unsigned32 .1.3.6.1.4.1.25506.2.75.13.2.1.1.8 |
hh3cDot11SaIntfDevTableThis table contains the information of the interfering devices. SEQUENCE OF Hh3cDot11SaIntfDevEntry .1.3.6.1.4.1.25506.2.75.13.2.2 |
hh3cDot11SaIntfDevEntryThis entry contains the information of the interfering devices. Hh3cDot11SaIntfDevEntry .1.3.6.1.4.1.25506.2.75.13.2.2.1 |
hh3cDot11SaDevIDRepresents the device identification number that uniquely identified the interfering device. Integer32 .1.3.6.1.4.1.25506.2.75.13.2.2.1.1 |
hh3cDot11SaDevTypeRepresents type of the interferer.ro Hh3cDot11SaIntfDevType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.13.2.2.1.2 |
hh3cDot11SaDevSIRepresents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.2.1.3 |
hh3cDot11SaDevRSSIRepresents receive signal strength indicator (RSSI) of interfering device.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.2.1.4 |
hh3cDot11SaDevDutyCycleRepresents proportion of time in percentage during which the interfering device was active.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.2.1.5 |
hh3cDot11SaDevAffectedChlsRepresents channels that the interfering device affects.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.13.2.2.1.6 |
hh3cDot11SaDevDetectedTimeRepresents time at which the interference was detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.13.2.2.1.7 |
hh3cDot11SaAirQualityTableThis table contains the air quality of the channels. SEQUENCE OF Hh3cDot11SaAirQualityEntry .1.3.6.1.4.1.25506.2.75.13.2.3 |
hh3cDot11SaAirQualityEntryThis entry contains the air quality of the channels. Hh3cDot11SaAirQualityEntry .1.3.6.1.4.1.25506.2.75.13.2.3.1 |
hh3cDot11SaChlNumRepresents the radio channel where the air quality is monitored. Hh3cDot11ChannelScopeType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.13.2.3.1.1 |
hh3cDot11SaAvgQualityRepresents the average air quality for this radio channel.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.3.1.2 |
hh3cDot11SaMinQualityRepresents the minimum air quality for this radio channel.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.3.1.3 |
hh3cDot11SaIntfDevNumRepresents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.3.1.4 |
hh3cDot11SaWiFiUtilRepresents the percentage of the channel currently being used by Wi-Fi devices.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.3.1.5 |
hh3cDot11SaNonWiFiUtilRepresents the percentage of the channel currently being used by non-Wi-Fi interference.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.3.1.6 |
hh3cDot11SaNoiseFloorRepresents current noise floor recorded on the channel.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.2.3.1.7 |
hh3cDot11SaNotifyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.13.3 |
hh3cDot11SaTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.13.3.0 |
hh3cDot11SaIntfDevDetectedInterfering device is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.13.3.0.1 |
hh3cDot11SaIntfDevDisappearInterfering device disappeared. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.13.3.0.2 |
hh3cDot11SaChlQltLowThe quality of the channel is below the specified threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.13.3.0.3 |
hh3cDot11SaChlQltRecoverThe quality of the channel recovered from low status. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.13.3.0.4 |
hh3cDot11SaTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.13.3.1 |
hh3cDot11SaTrapAPIDRepresents the identifier of the AP.ro Hh3cDot11ObjectIDType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.13.3.1.1 |
hh3cDot11SaTrapRadioIDRepresents the identifier of the radio.ro Hh3cDot11RadioScopeType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.13.3.1.2 |
hh3cDot11SaTrapDevIDRepresents the device identification number that uniquely identified the interfering device.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.3.1.3 |
hh3cDot11SaTrapIntfDevTypeRepresents type of the interferer.ro Hh3cDot11SaIntfDevType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.13.3.1.4 |
hh3cDot11APTrapDevSIRepresents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).ro Integer32 .1.3.6.1.4.1.25506.2.75.13.3.1.5 |
hh3cDot11SaTrapDevRSSIRepresents receive signal strength indicator (RSSI) of interfering device.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.3.1.6 |
hh3cDot11APTrapDevDCRepresents proportion of time in percentage during which the interfering device was active.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.3.1.7 |
hh3cDot11APTrapDevChlsRepresents channels that the interfering device affects.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.13.3.1.8 |
hh3cDot11APTrapDevDctTimeRepresents time at which the interference was detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.13.3.1.9 |
hh3cDot11SaTrapChlNumRepresents the radio channel where the air quality is monitored.ro Hh3cDot11ChannelScopeType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.13.3.1.10 |
hh3cDot11SaTrapChlQltRepresents the quality for this radio channel.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.3.1.11 |
hh3cDot11SaTrapChlIntfNumRepresents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.ro Integer32 .1.3.6.1.4.1.25506.2.75.13.3.1.12 |