HH3C-DOT11-ACMT-MIB
AI MIB Summary
The HH3C-DOT11-ACMT-MIB module monitors the CAPWAP tunnel state, control channel status, and operational parameters of Fit Access Points (APs) and Wireless Access Controllers (ACs) within H3C enterprise networks. It provides visibility into IEEE 802.11 Basic Service Set (BSS) configurations, radio interface metrics, and the association status of stations managed by the AC.
This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
Main OID:
hh3cDot11ACMT.1.3.6.1.4.1.25506.2.75.1
123
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
123 total| Object Name |
|---|
hh3cDot11ACMTThis MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.75.1 |
hh3cDot11ACObjectGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1 |
hh3cDot11ACObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1.1 |
hh3cDot11CurrentACMACModeRepresents which MAC mode defined in the CAPWAP draft is in use for the AC.ro Hh3cDot11MACModeType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.1.1.1.1 |
hh3cDot11MaxAPNumPermittedRepresents the maximum number of AP connection permitted for one AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.1.2 |
hh3cDot11MaxStationNumPermittedRepresents the maximum number of station connection permitted for one AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.1.3 |
hh3cDot11RunAPNumThresholdWhen the percentage of run AP number is larger than this threshold, a notification will be sent.rw Integer32 .1.3.6.1.4.1.25506.2.75.1.1.1.4 |
hh3cDot11ACLoadInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1.2 |
hh3cDot11APConnectCountRepresents the total number of APs which are connecting to AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.1 |
hh3cDot11StationConnectCountRepresents the total number of stations which are accessing the WLAN service through AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.2 |
hh3cDot11ACIFLoadInfoTableRepresents AP number information of interface. SEQUENCE OF Hh3cDot11ACIFLoadInfoEntry .1.3.6.1.4.1.25506.2.75.1.1.2.3 |
hh3cDot11ACIFLoadInfoEntryEach entry represents AP number information of an interface Hh3cDot11ACIFLoadInfoEntry .1.3.6.1.4.1.25506.2.75.1.1.2.3.1 |
hh3cDot11ACIfIndexRepresents index of AC interface.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.3.1.1 |
hh3cDot11ACIfApNumRepresents AP number connected to the AC interface.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.3.1.2 |
hh3cDot11ACIfStaNumRepresents Station number connected to the AC interface.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.3.1.3 |
hh3cDot11ACIfNameRepresents InterfaceName AP number connected to AC interface.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.1.1.2.3.1.4 |
hh3cDot11MasterAPCountRepresents the total number of AP which have established the master tunnel with AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.4 |
hh3cDot11SlaveAPCountRepresents the total number of AP which have established the slave tunnel with AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.5 |
hh3cDot11ConnectAutoAPCountRepresents the total number of auto APs that are connecting to AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.6 |
hh3cDot11PersistentAPCountRepresents the total number of persistent AP.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.7 |
hh3cDot11AcUploadFrameCntRepresents the number of frames that AP sends to AC through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.25506.2.75.1.1.2.8 |
hh3cDot11AcDownloadFrameCntRepresents the number of frames that AC sends to AP through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.25506.2.75.1.1.2.9 |
hh3cDot11AcUploadFrameBytesRepresents the bytes of frames that AP sends to AC through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.25506.2.75.1.1.2.10 |
hh3cDot11AcDownloadFrameBytesRepresents the bytes of frames that AC sends to AP through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.25506.2.75.1.1.2.11 |
hh3cDot11BackupACRoleThis object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC.ro Enumeration .1.3.6.1.4.1.25506.2.75.1.1.2.12 |
hh3cDot11BackupACNMSIPThis object represents the manger IP address of the slave ac.ro IpAddress .1.3.6.1.4.1.25506.2.75.1.1.2.13 |
hh3cDot11ACBackupModeThis object represents the ac backup mode.ro Enumeration .1.3.6.1.4.1.25506.2.75.1.1.2.14 |
hh3cDot11ACBackupStatusThis object represents the ac backup status.ro Enumeration .1.3.6.1.4.1.25506.2.75.1.1.2.15 |
hh3cDot11ACSwitchCntThis object represents the ac switch times.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.16 |
hh3cDot11ACSouthifPacketOutputCountRepresents the count of output packets with the down-link interface.ro Counter64 .1.3.6.1.4.1.25506.2.75.1.1.2.17 |
hh3cDot11ACSouthifPacketOutputBytesRepresents the bytes of output packets with the down-link interface.ro Counter64 .1.3.6.1.4.1.25506.2.75.1.1.2.18 |
hh3cDot11ACSouthifPacketInputCountRepresents the count of input packets with the down-link interface.ro Counter64 .1.3.6.1.4.1.25506.2.75.1.1.2.19 |
hh3cDot11ACSouthifPacketInputBytesRepresents the bytes of input packets with the down-link interface.ro Counter64 .1.3.6.1.4.1.25506.2.75.1.1.2.20 |
hh3cDot11TotalAPconnectedRepresents the total number of AP which are connected to AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.21 |
hh3cDot11RemainingAPcapacityRepresents the remaining AP capacity of the AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.2.22 |
hh3cDot11WLANAssocStatisInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1.3 |
hh3cDot11StationAssocSumRepresents the total number of station association.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.3.1 |
hh3cDot11StationAssocFailSumRepresents the total number of station association failure.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.3.2 |
hh3cDot11StationReassocSumRepresents the total number of station reassociation.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.3.3 |
hh3cDot11StationAssocRejectedSumRepresents the total number of station association rejected on account of resource limit.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.3.4 |
hh3cDot11StationExDeAuthenSumRepresents the total number of exceptional station deauthentication (Without sending a deauthentication to AP).ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.3.5 |
hh3cDot11StationCurAssocSumRepresents the total number of current associated stations.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.3.6 |
hh3cDot11StationAssocReqSumRepresents the total number of station association request.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.3.7 |
hh3cDot11StationReassocReqSumRepresents the total number of station reassociation request.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.3.8 |
hh3cDot11StationReassocFailSumRepresents the total number of station reassociation failure.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.3.9 |
hh3cDot11ACBASInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1.4 |
hh3cDot11ACBASSysObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1.4.1 |
hh3cDot11ACBASTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1.4.2 |
hh3cDot11ACBASIfTableRepresents the BAS information of interfaces. SEQUENCE OF Hh3cDot11ACBASIfEntry .1.3.6.1.4.1.25506.2.75.1.1.4.2.3 |
hh3cDot11ACBASIfEntryEach entry represents the BAS information of an interface Hh3cDot11ACBASIfEntry .1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1 |
hh3cDot11ACBASIfIndexThe ifIndex of the BAS interface. Integer32 .1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.1 |
hh3cDot11ACBASIfDescrA textual string containing information about the BAS interface.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.2 |
hh3cDot11ACBASIfTypeThe type of the BAS interface.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.3 |
hh3cDot11ACStaUserSecAuthStatis OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1.5 |
hh3cDot11ACStaUserAuthCurNumberRepresents the current number of user authenticated with this AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.5.1 |
hh3cDot11ACStaUserConnFailCntRepresents the total number of user disconnected with this AC.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.5.2 |
hh3cDot11ACStaUserAuthReqCntRepresents the total number of user authenticate request with this AC.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.5.3 |
hh3cDot11ACStaUserAuthSuccCntRepresents the total number of users authenticated successful with this AC.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.5.4 |
hh3cDot11ACStaUserAuthFailCntRepresents the total number of user authenticated failed with this AC.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.5.5 |
hh3cDot11ACStaUserAllAuthCntCMRepresents the total number of users authenticated with this AC.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.5.6 |
hh3cDot11ACStaSecAuthTypeStatis OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.1.6 |
hh3cDot11ACStaUserPortalOnlineNumRepresents the number of online portal users authenticated by RADIUS, including MAC-trigger and IMSIAuth users.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.6.1 |
hh3cDot11ACStaUserFreeAuthOnlineNumNumbers of online user is no need authenticated.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.6.2 |
hh3cDot11ACStaUserAssociateAuthOnlineNumRepresents the number of online users authenticated by associated authentication, excluding AutoAuth users.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.6.3 |
hh3cDot11ACStaUserMacAuthOnlineNumThe numbers of online user which is launched authentication by MAC address and authenticated by Radius.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.6.4 |
hh3cDot11ACStaUserPortalLostConnectionCntFor PortalAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.5 |
hh3cDot11ACStaUserFreeAuthLostConnectionCntFor FreeAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.6 |
hh3cDot11ACStaUserAssociateAuthLostConnectionCntFor AssociateAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.7 |
hh3cDot11ACStaUserMacAuthLostConnectionCntFor MacAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.8 |
hh3cDot11ACStaPortalAuthReqCntRepresents PortalAuth request count after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.9 |
hh3cDot11ACStaAssociateAuthReqCntRepresents AssociateAuth request count after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.10 |
hh3cDot11ACStaMacAuthReqCntRepresents MacAuth request count after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.11 |
hh3cDot11ACStaPortalAuthSuccCntRepresents count of PortalAuth authenticated successfully after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.12 |
hh3cDot11ACStaAssociateAuthSuccCntRepresents count of AssociateAuth authenticated successfully after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.13 |
hh3cDot11ACStaMacAuthSuccCntRepresents count of MacAuth authenticated successfully after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.14 |
hh3cDot11ACStaPortalAuthReqFailCntRepresents count of PortalAuth failure in request after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.15 |
hh3cDot11ACStaAssociateAuthReqFailCntRepresents count of AssociateAuth failure in request after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.16 |
hh3cDot11ACStaMacAuthReqFailCntRepresents count of MacAuth failure in request after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.17 |
hh3cDot11ACStaUserAutoAuthOnlineNumCMRepresents the number of online users authenticated by auto authentication.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.1.6.18 |
hh3cDot11ACStaUserAutoAuthLostConnectionCntCMRepresents the disconnection count of AutoAuth users, excluding the ones who disconnect AP by themselves.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.19 |
hh3cDot11ACStaAutoAuthReqCntCMRepresents the count of AutoAuth requests after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.20 |
hh3cDot11ACStaAutoAuthSuccCntCMRepresents the count of successful AutoAuth authentications after AP up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.21 |
hh3cDot11ACStaAutoAuthReqFailCntCMRepresents the count of failed AutoAuth requests after AP is up.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.6.22 |
hh3cDot11ACPortalStatisticCMTableThe table describes portal statistics information. SEQUENCE OF Hh3cDot11ACPortalStatisticCMEntry .1.3.6.1.4.1.25506.2.75.1.1.7 |
hh3cDot11ACPortalStatisticCMEntryEach entry contains the portal statistics information of an SSID. Hh3cDot11ACPortalStatisticCMEntry .1.3.6.1.4.1.25506.2.75.1.1.7.1 |
hh3cDot11ACPortalStatisticSSIDCMRepresents the service policy name. OCTET STRING .1.3.6.1.4.1.25506.2.75.1.1.7.1.1 |
hh3cDot11ACPortalStatAuthReqCMRepresents the total number of portal authentication requests from portal server to AC.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.7.1.2 |
hh3cDot11ACPortalStatAuthRespCMRepresents the total number of portal authentication responses from AC to portal server.ro Counter32 .1.3.6.1.4.1.25506.2.75.1.1.7.1.3 |
hh3cDot11CAPWAPTunnelGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.2 |
hh3cDot11CAPWAPTunnelTableThe table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol. SEQUENCE OF Hh3cDot11CAPWAPTunnelEntry .1.3.6.1.4.1.25506.2.75.1.2.1 |
hh3cDot11CAPWAPTunnelEntryEach entry contains information of data tunnel and control tunnel of AP which is connecting to AC. Hh3cDot11CAPWAPTunnelEntry .1.3.6.1.4.1.25506.2.75.1.2.1.1 |
hh3cDot11CurrTunnelAPIDTo uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC.ro Hh3cDot11ObjectIDType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.1.2.1.1.1 |
hh3cDot11CtrlTunnelCurrSecRepresents what security scheme is in use for control tunnel.ro Hh3cDot11TunnelSecSchemType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.1.2.1.1.2 |
hh3cDot11CtrlTunnelUpTimeRepresents how long for control tunnel up. If the value is zero, then tunnel is not set up.ro Integer32 UNITS "second" .1.3.6.1.4.1.25506.2.75.1.2.1.1.3 |
hh3cDot11DataTunnelCurrSecRepresents what security scheme is in use for data tunnel.ro Hh3cDot11TunnelSecSchemType (HH3C-DOT11-REF-MIB) .1.3.6.1.4.1.25506.2.75.1.2.1.1.4 |
hh3cDot11DataTunnelUpTimeRepresents how long for data tunnel up. If the value is zero, then tunnel is not set up.ro Integer32 UNITS "second" .1.3.6.1.4.1.25506.2.75.1.2.1.1.5 |
hh3cDot11CtrlTunnelUpTimeTicksRepresents how long control tunnel is up. If the value is zero, then tunnel is not set up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.25506.2.75.1.2.1.1.6 |
hh3cDot11ACMtNotifyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.3 |
hh3cDot11ACMtTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.3.0 |
hh3cDot11ACMtTunnelSetupTrapThis notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.1.3.0.1 |
hh3cDot11ACMtTunnelDownTrapThis notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.1.3.0.2 |
hh3cDot11ACMtBackupSwtTrapThis trap is sent by AC when AC switches from master to slave or from slave to master. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.1.3.0.3 |
hh3cDot11ACLoadBalanceTrapThis trap is sent by AC when load-balance is enabled on AC. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.1.3.0.4 |
hh3cDot11ACStaFullTrapThis notification will be sent when STA is full on AC. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.1.3.0.5 |
hh3cDot11ACStatusSwitchTrapThis notification will be sent when AC switches from standby to active or from standby to active. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.1.3.0.6 |
hh3cDot11RunAPNumOverloadThe notification will be sent by AC when run AP number exceeds the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.1.3.0.7 |
hh3cDot11RunAPNumOverloadRecoverThe notification will be sent by AC when run AP number recover normal from overload state. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.75.1.3.0.8 |
hh3cDot11ACMtTrapVarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.75.1.3.1 |
hh3cDot11ACMtTrapTunlDwnInfoRepresents the reason for tunnel down. The following values are supported: tunnelTimeout - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure - rekey process is failed, tunnel will be broken. apReset - Administrator reset AP. apCrash - AP reboot for system crash. apDeleted - Delete AP from AC and trigger tunnel down. apCfgChange - The configuration for AP was changed.ro Enumeration .1.3.6.1.4.1.25506.2.75.1.3.1.1 |
hh3cDot11ACMtTrapTunlUpInfoRepresents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC.ro Enumeration .1.3.6.1.4.1.25506.2.75.1.3.1.2 |
hh3cDot11ACMtTrapBackupSwitchInfoRepresents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master.ro Enumeration .1.3.6.1.4.1.25506.2.75.1.3.1.3 |
hh3cDot11ACMtTrapTnlAPNameRepresents name of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.1.3.1.4 |
hh3cDot11ACMtTrapTnlAPIPAddrRepresents IP address of the AP which sets up the tunnel with the AC.ro IpAddress .1.3.6.1.4.1.25506.2.75.1.3.1.5 |
hh3cDot11LoadBalanceTypeRepresents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered.ro Enumeration .1.3.6.1.4.1.25506.2.75.1.3.1.6 |
hh3cDot11LoadBalanceThresholdRepresents the value of load balance threshold.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.3.1.7 |
hh3cDot11ACMtTrapAPIPv6AddrRepresents IPv6 address of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.1.3.1.8 |
hh3cDot11ACMtTrapTunlDwnCountRepresents how many times that the tunnel between AC and AP has down.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.3.1.9 |
hh3cDot11ACMaxStaNumRepresents the max number of STA on AC.ro Integer32 .1.3.6.1.4.1.25506.2.75.1.3.1.10 |
hh3cDot11ACMtTrapTnlAPSysNameRepresents system name of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.25506.2.75.1.3.1.11 |
hh3cDot11ACMtFirstTrapTimeRepresents the first trap time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.25506.2.75.1.3.1.12 |
hh3cDot11ACStatusSwitchInfoRepresents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active.ro Enumeration .1.3.6.1.4.1.25506.2.75.1.3.1.13 |
hh3cDot11SourceACNmsIPRepresents the NMS IP address of master AC.ro IpAddress .1.3.6.1.4.1.25506.2.75.1.3.1.14 |
hh3cDot11ACMtTrapAPMacAddressRepresents the MAC address of an AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.75.1.3.1.15 |