HH3C-DLDP-MIB
AI MIB Summary
The HH3C-DLDP-MIB module enables monitoring and management of the Device Link Detection Protocol (DLDP) on H3C network switches to detect unidirectional link failures and manage corresponding link states. It provides visibility into DLDP session statuses, neighbor discovery results, and interface-level detection counters for proactive link integrity verification.
DLDP (Device Link Detection Protocol) MIB
Main OID:
hh3cDldp.1.3.6.1.4.1.25506.2.43
27
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
hh3cDldpDLDP (Device Link Detection Protocol) MIB MODULE-IDENTITY .1.3.6.1.4.1.25506.2.43 |
hh3cDLDPMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.43.1 |
hh3cDLDPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.43.1.1 |
hh3cDLDPWorkModeThe work mode of DLDP.
Normal mode means DLDP does not detect neighbor on its own initiative
when all neighbors aged.
Enhance mode means DLDP detects neighbor on its own initiative
when all neighbors aged.rw Enumeration .1.3.6.1.4.1.25506.2.43.1.1.1 |
hh3cDLDPSystemEnableDLDP enable or disable systematically.
This node only supports set operation.
If setting it to true, all the fiber ports will enable DLDP and
the agent automatically creates new rows for each port in
hh3cDLDPPortDLDPTable.
If setting it to false, all the fiber ports will disable DLDP
and the agent automatically destroy the corresponding rows in
hh3cDLDPPortDLDPTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.43.1.1.2 |
hh3cDLDPSystemResetDLDP reset systematically.
This node only supports set operation.
If the value of hh3cDLDPSystemReset is true,
and the current state is disable,
it will change to inactive while the port is down
or active while the port is up.
If hh3cDLDPPortDLDPState is not disable, it does not change.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.43.1.1.3 |
hh3cDLDPIntervalThe interval of sending an advertisement PDU.
unit : secondrw INTEGER .1.3.6.1.4.1.25506.2.43.1.1.4 |
hh3cDLDPAuthenticationModeType of authentication mode.rw Enumeration .1.3.6.1.4.1.25506.2.43.1.1.5 |
hh3cDLDPAuthenticationPasswordThis is the password for authentication.
If the value of hh3cDLDPAuthenticationMode is null,
the user cannot set this node.
If the value of hh3cDLDPAuthenticationMode is simple or MD5,
the user must set this node with a string.
When the user gets or walks this node,
it displays a cipher password if hh3cDLDPAuthenticationMode is MD5 or
simple or a zero-length string if hh3cDLDPAuthenticationMode is null.rw OCTET STRING .1.3.6.1.4.1.25506.2.43.1.1.6 |
hh3cDLDPUnidirectionalShutdownThe mode of unidirectional shutdown.
It indicates the shutdown mode when a unidirectional link happened.
Auto mode means the port will be shut down automatically
when DLDP detects unidirectional link.
Manual mode means the port needs to be shut down by
the administrator manually when DLDP detects unidirectional link.rw Enumeration .1.3.6.1.4.1.25506.2.43.1.1.7 |
hh3cDLDPPortStateTableThe table of the Ethernet ports of a LAN switch. SEQUENCE OF Hh3cDLDPPortStateEntry .1.3.6.1.4.1.25506.2.43.1.2 |
hh3cDLDPPortStateEntryInformation about a hh3cDLDPPortDLDPTable entity. Hh3cDLDPPortStateEntry .1.3.6.1.4.1.25506.2.43.1.2.1 |
hh3cDLDPPortStateState of a port.
If setting it to enabled, the port will enable DLDP and a new row
will be added in hh3cDLDPPortDLDPTable for this port.
If setting it to disabled, the port will disable DLDP and the
corresponding row will be destroyed in hh3cDLDPPortDLDPTable.rw EnabledStatus .1.3.6.1.4.1.25506.2.43.1.2.1.1 |
hh3cDLDPPortDLDPTableTable of a LAN switch's ports, which enable DLDP. SEQUENCE OF Hh3cDLDPPortDLDPEntry .1.3.6.1.4.1.25506.2.43.1.3 |
hh3cDLDPPortDLDPEntryThe information of a port, which enable DLDP. Hh3cDLDPPortDLDPEntry .1.3.6.1.4.1.25506.2.43.1.3.1 |
hh3cDLDPPortDLDPStateOperating state of DLDP on the port.
It is relational with hh3cDLDPPortState and hh3cDLDPLinkState.ro DLDPStatus .1.3.6.1.4.1.25506.2.43.1.3.1.1 |
hh3cDLDPLinkStateThe link state of the port.ro Enumeration .1.3.6.1.4.1.25506.2.43.1.3.1.2 |
hh3cDLDPPortDLDPResetDLDP reset systematically.
This node only supports set operation.
If the value of hh3cDLDPPortDLDPReset is true,
and the current state is disable,
it will change to inactive while the port is down
or active while the port is up.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.43.1.3.1.3 |
hh3cDLDPNeighborTableTable of a port's neighbors. SEQUENCE OF Hh3cDLDPNeighborEntry .1.3.6.1.4.1.25506.2.43.1.4 |
hh3cDLDPNeighborEntryThe information of a neighbor. Hh3cDLDPNeighborEntry .1.3.6.1.4.1.25506.2.43.1.4.1 |
hh3cDLDPNeighborBridgeMacThe bridge MAC address of a neighbor. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.43.1.4.1.1 |
hh3cDLDPNeighborPortIndexThe port index of a neighbor. Integer32 .1.3.6.1.4.1.25506.2.43.1.4.1.2 |
hh3cDLDPNeighborStateThe state of a neighbor.ro DLDPNeighborStatus .1.3.6.1.4.1.25506.2.43.1.4.1.3 |
hh3cDLDPNeighborAgingTimeThe aging time of a neighbor. unit: second.ro Integer32 .1.3.6.1.4.1.25506.2.43.1.4.1.4 |
hh3cDLDPTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.43.2 |
hh3cDLDPNotification OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.43.2.1 |
hh3cDLDPUnidirectionalPortIt will send a SNMP trap when the state of a port
has changed to unidirectional-link. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.43.2.1.1 |