HH3C-DHCP4-MIB
DHCPv4 MIB
Main OID:
hh3cDhcp4.1.3.6.1.4.1.25506.2.122
223
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
223 total| Object Name |
|---|
hh3cDhcp4DHCPv4 MIB MODULE-IDENTITY .1.3.6.1.4.1.25506.2.122 |
hh3cDhcpServer2ScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.122.1 |
hh3cDhcpServer2ConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.122.1.1 |
hh3cDhcpServer2EnabledIf the value of this object is 'true', the DHCP service is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.1.1.1 |
hh3cDhcpServer2AlwaysBroadcastWhen the value of this object is set to 'true', the DHCP server always uses broadcast to reply the client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.1.1.2 |
hh3cDhcpServer2IgnoreBootpWhen the value of this object is set to 'true', the DHCP server ignores BOOTP requests.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.1.1.3 |
hh3cDhcpServer2BootpReplyRfc1048When the value of this object is set to 'true', the DHCP server use RFC 1048 format to reply to BOOTP requests.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.1.1.4 |
hh3cDhcpServer2Opt82EnabledWhen the value of this object is set to 'true', the DHCP server handles DHCP option 82.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.1.1.5 |
hh3cDhcpServer2PingNumberThe number of ping packets sent out.rw Unsigned32 .1.3.6.1.4.1.25506.2.122.1.1.6 |
hh3cDhcpServer2PingTimeoutThe delay for the reply of a ping packet in milliseconds.rw Unsigned32 .1.3.6.1.4.1.25506.2.122.1.1.7 |
hh3cDhcpServer2StatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.122.1.2 |
hh3cDhcpServer2BadNumThe total number of the bad packets received.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.1 |
hh3cDhcpServer2BootpRequestNumThe total number of the BOOTREQUEST packets received.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.2 |
hh3cDhcpServer2DiscoverNumThe total number of the DHCPDISCOVER packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.3 |
hh3cDhcpServer2RequestNumThe total number of the DHCPREQUEST packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.4 |
hh3cDhcpServer2DeclineNumThe total number of the DHCPDECLINE packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.5 |
hh3cDhcpServer2ReleaseNumThe total number of the DHCPRELEASE packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.6 |
hh3cDhcpServer2InformNumThe total number of the DHCPINFORM packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.7 |
hh3cDhcpServer2BootpReplyNumThe total number of the BOOTREPLY packets sent by the DHCP server.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.8 |
hh3cDhcpServer2OfferNumThe total number of the DHCPOFFER packets sent by the DHCP server.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.9 |
hh3cDhcpServer2AckNumThe total number of the DHCPACK packets sent by the DHCP server.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.10 |
hh3cDhcpServer2NakNumThe total number of the DHCPNAK packets sent by the DHCP server.ro Counter64 .1.3.6.1.4.1.25506.2.122.1.2.11 |
hh3cDhcpServer2TotalPoolUsageThe percentage of IP addresses in use of all DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.25506.2.122.1.2.12 |
hh3cDhcpServer2PoolNumberThe total number of DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.25506.2.122.1.2.13 |
hh3cDhcpServer2ConflictNumThe total number of conflict IP in all DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.25506.2.122.1.2.14 |
hh3cDhcpServer2AutoBindNumThe total number of auto binding IP in DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.25506.2.122.1.2.15 |
hh3cDhcpServer2ManualBindNumThe total number of manual binding IP in DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.25506.2.122.1.2.16 |
hh3cDhcpServer2ExpiredBindNumThe total number of expired binding IP in DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.25506.2.122.1.2.17 |
hh3cDhcpServer2Tables OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.122.2 |
hh3cDhcpServer2PoolTableA table containing DHCP server pool configurations. SEQUENCE OF Hh3cDhcpServer2PoolEntry .1.3.6.1.4.1.25506.2.122.2.1 |
hh3cDhcpServer2PoolEntryAn entry containing DHCP server pool configurations. Hh3cDhcpServer2PoolEntry .1.3.6.1.4.1.25506.2.122.2.1.1 |
hh3cDhcpServer2PoolIndexDHCP server pool index. Unsigned32 .1.3.6.1.4.1.25506.2.122.2.1.1.1 |
hh3cDhcpServer2PoolNameDHCP server pool name. Once this object is created, the value of this object cannot be modified.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.2 |
hh3cDhcpServer2PoolVpnNameName of the VPN instance that the DHCP pool binds to. The value of a zero-length string means the public network. Once this object is created, the value of this object cannot be modified.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.3 |
hh3cDhcpServer2PoolNetworkNetwork address of the primary subnet in a DHCP pool. If the value of this object is set to 0.0.0.0, hh3cDhcpServer2PoolNetworkMask is set with 0.0.0.0 automatically.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.4 |
hh3cDhcpServer2PoolNetworkMaskNetwork mask of the primary subnet in a DHCP pool. The SET operation to this object ought to be with the SET of hh3cDhcpServer2PoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.5 |
hh3cDhcpServer2PoolStartAddrStart IP of an address range of the DHCP pool. If the value of this object is set to 0.0.0.0, hh3cDhcpServer2PoolEndAddr is set with 0.0.0.0 automatically. Otherwise hh3cDhcpServer2PoolEndAddr must be set with an IP address NOT smaller than the value of this object.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.6 |
hh3cDhcpServer2PoolEndAddrEnd IP of an address range of the DHCP pool, The SET operation to this object ought to be with the SET of hh3cDhcpServer2PoolStartAddr together, and any SET operation alone to this object will be regarded as an invalid operation.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.7 |
hh3cDhcpServer2PoolLeaseDayNumber of days of the lease. The SET operation to this object ought to be with the SET of hh3cDhcpServer2PoolLeaseHour, hh3cDhcpServer2PoolLeaseMinute, hh3cDhcpServer2PoolLeaseSecond together, and any SET operation alone to any of these objects will be regarded as an invalid operation. These objects cannot be set with 0 simultaneously.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.1.1.8 |
hh3cDhcpServer2PoolLeaseHourNumber of hours of the lease.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.1.1.9 |
hh3cDhcpServer2PoolLeaseMinuteNumber of minutes of the lease.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.1.1.10 |
hh3cDhcpServer2PoolLeaseSecondNumber of seconds of the lease.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.1.1.11 |
hh3cDhcpServer2PoolLeaseUnlimitA flag denoting whether the lease time of a DHCP pool is unlimited.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.1.1.12 |
hh3cDhcpServer2PoolLeaseTimeThe lease time of a DHCP pool in number of timeticks. The value of this object cannot be set to 0 and must be set to 4294967295 or a multiple of 100. If the object is set with 4294967295, the lease time of a DHCP pool is unlimited.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.25506.2.122.2.1.1.13 |
hh3cDhcpServer2PoolDomainNameDomain name for DHCP clients. If the object is set with a zero-length string, the configuration of the domain name is removed.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.14 |
hh3cDhcpServer2PoolGatewayIPGateway IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.15 |
hh3cDhcpServer2PoolDNSIPDNS server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 DNS server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the DNS address is removed.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.16 |
hh3cDhcpServer2PoolPrimaryDNSIPThe primary DNS server IP address to be assigned to the client.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.17 |
hh3cDhcpServer2PoolSecondDNSIPThe secondary DNS server IP address to be assigned to the client.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.18 |
hh3cDhcpServer2PoolNetbiosTypeNetBios node type for DHCP clients.rw Enumeration .1.3.6.1.4.1.25506.2.122.2.1.1.19 |
hh3cDhcpServer2PoolNbnsIPNetBios server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 NetBios server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the NBNS address is removed.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.20 |
hh3cDhcpServer2PoolBootFileNameBoot file name for DHCP clients. If the object is set with a zero-length string, the configuration of the boot file name is removed.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.21 |
hh3cDhcpServer2PoolBimsIPBIMS server IP address. If the object is set with 0.0.0.0, hh3cDhcpServer2PoolBimsPort is set with 0 and hh3cDhcpServer2PoolBimsKeyStr is set with a zero-length string automatically. Otherwise hh3cDhcpServer2PoolBimsPort and hh3cDhcpServer2PoolBimsKeyStr must be set at the same time while hh3cDhcpServer2PoolBimsKeyStr must be set with a non-zero length string.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.22 |
hh3cDhcpServer2PoolBimsPortBIMS server port number. The SET operation to this object ought to be with the SET operation of hh3cDhcpServer2PoolBimsIP and hh3cDhcpServer2PoolBimsKeyStr together, and any SET operation alone to this object will be regarded as an invalid operation.rw Unsigned32 .1.3.6.1.4.1.25506.2.122.2.1.1.23 |
hh3cDhcpServer2PoolBimsKeyStrBIMS server key string. The SET operation to this object ought to be with the SET of hh3cDhcpServer2PoolBimsIP and hh3cDhcpServer2PoolBimsPort together, and any SET operation alone to this object will be regarded as an invalid operation.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.24 |
hh3cDhcpServer2PoolNextServerNext DHCP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the next server address is removed.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.25 |
hh3cDhcpServer2PoolTftpDomNameTFTP server domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the TFTP domain name is removed.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.26 |
hh3cDhcpServer2PoolTftpIPTFTP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the TFTP server address is removed.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.27 |
hh3cDhcpServer2PoolVoiceAsIPVoice backup server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice backup server IP address is removed.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.28 |
hh3cDhcpServer2PoolVoiceFailIPVoice failover IP address for DHCP clients. If the object is set with 0.0.0.0, hh3cDhcpServer2PoolVoiceFailStr is set with a zero-length string automatically. Otherwise hh3cDhcpServer2PoolVoiceFailStr must be set with a non-zero length string at the same time.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.29 |
hh3cDhcpServer2PoolVoiceFailStrVoice failover dialer string for DHCP clients. The characters in the string must be '0' ~ '9',or '*'. The SET operation to this object ought to be with the SET operation of hh3cDhcpServer2PoolVoiceFailIP together, and any SET operation alone to this object will be regarded as an invalid operation.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.1.1.30 |
hh3cDhcpServer2PoolVoiceNCPIPVoice network calling processing IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice network calling processing IP address is removed.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.1.1.31 |
hh3cDhcpServer2PoolVoiceVlanIdVoice VLAN ID for DHCP clients. If the value of this object is set to 65535, hh3cDhcpServer2PoolVoiceVlanEnbl is set with 'false' automatically. Otherwise hh3cDhcpServer2PoolVoiceVlanEnbl must also be set.rw Unsigned32(2..4094 | 65535) .1.3.6.1.4.1.25506.2.122.2.1.1.32 |
hh3cDhcpServer2PoolVoiceVlanEnblEnable status of the specified voice VLAN for DHCP clients. The SET operation to this object ought to be with the SET operation of hh3cDhcpServer2PoolVoiceVlanId together, and any SET operation alone to this object will be regarded as an invalid operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.1.1.33 |
hh3cDhcpServer2PoolRowStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.1.1.34 |
hh3cDhcpServer2PoolVerifyClassEnable the user class verification. When the value of this object is set to 'true', the DHCP server processes packets from DHCP clients in the defined user classes. The user class verification does not apply to packets from DHCP clients with static bindings.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.1.1.35 |
hh3cDhcpServer2IfApplyPoolTableA table for applying a DHCP pool on interfaces. SEQUENCE OF Hh3cDhcpServer2IfApplyPoolEntry .1.3.6.1.4.1.25506.2.122.2.2 |
hh3cDhcpServer2IfApplyPoolEntryAn entry for applying a DHCP pool on the interface. Hh3cDhcpServer2IfApplyPoolEntry .1.3.6.1.4.1.25506.2.122.2.2.1 |
hh3cDhcpServer2IfApplyPoolNameThe name of the DHCP pool that apply to the interface. If the object is set with a zero-length string, the configuration will be deleted.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.2.1.1 |
hh3cDhcpServer2PoolSecNwTableA table containing the secondary network configuration of DHCP pools. SEQUENCE OF Hh3cDhcpServer2PoolSecNwEntry .1.3.6.1.4.1.25506.2.122.2.3 |
hh3cDhcpServer2PoolSecNwEntryAn entry containing the objects for configuring the secondary network for DHCP pools. Hh3cDhcpServer2PoolSecNwEntry .1.3.6.1.4.1.25506.2.122.2.3.1 |
hh3cDhcpServer2PoolSecNwNetwork address of the secondary subnets in a DHCP pool. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.3.1.1 |
hh3cDhcpServer2PoolSecNwMaskNetwork mask of the secondary subnets in a DHCP pool. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.3.1.2 |
hh3cDhcpServer2PoolSecNwGwIPGateway IP addresses of the secondary subnets in a DHCP pool. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a secondary network, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.3.1.3 |
hh3cDhcpServer2PoolSecNwStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.3.1.4 |
hh3cDhcpServer2PoolClassTableA table containing address range of the DHCP server pool for user classes. SEQUENCE OF Hh3cDhcpServer2PoolClassEntry .1.3.6.1.4.1.25506.2.122.2.4 |
hh3cDhcpServer2PoolClassEntryAn entry containing address range of DHCP pools for user classes. Hh3cDhcpServer2PoolClassEntry .1.3.6.1.4.1.25506.2.122.2.4.1 |
hh3cDhcpServer2PoolClassNameUser class name. OCTET STRING .1.3.6.1.4.1.25506.2.122.2.4.1.1 |
hh3cDhcpServer2PoolClassStartStart address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET operation of hh3cDhcpServer2PoolClassEnd together, and any SET operation alone to this object will be regarded as an invalid operation.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.4.1.2 |
hh3cDhcpServer2PoolClassEndEnd address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET of hh3cDhcpServer2PoolClassStart together, and any SET operation alone to this object will be regarded as an invalid operation. This object must be set with an IP address NOT smaller than the value of hh3cDhcpServer2PoolClassStart.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.4.1.3 |
hh3cDhcpServer2PoolClassStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hh3cDhcpServer2PoolClassStart and hh3cDhcpServer2PoolClassEnd must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.4.1.4 |
hh3cDhcpServer2PoolStaticTableA table containing the static binding configurations in DHCP pools. SEQUENCE OF Hh3cDhcpServer2PoolStaticEntry .1.3.6.1.4.1.25506.2.122.2.5 |
hh3cDhcpServer2PoolStaticEntryAn entry containing the objects for configuring the static binding in DHCP pools. Hh3cDhcpServer2PoolStaticEntry .1.3.6.1.4.1.25506.2.122.2.5.1 |
hh3cDhcpServer2PoolStaticIPIp address of a static binding in a DHCP pool. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.5.1.1 |
hh3cDhcpServer2PoolStaticMaskNetwork mask of a static binding in a DHCP pool.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.5.1.2 |
hh3cDhcpServer2PoolStaticCIDClient identifier of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.5.1.3 |
hh3cDhcpServer2PoolStaticHAddrHardware address of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.5.1.4 |
hh3cDhcpServer2PoolStaticHTypeHardware type of a DHCP client that the IP address binds to. The SET operation to this object ought to be with the SET operation of hh3cDhcpServer2PoolStaticHAddr, and any SET operation alone to this object will be regarded as an invalid operation. 'default' indicates that the hardware type is unknown. If the value of hh3cDhcpServer2PoolStaticCID is set to a non-zero length string, the object is set with 'default' automatically. Otherwise it cannot be set with 'default'. 'ethernet' indicates that the hardware type is ethernet. If the value of hh3cDhcpServer2PoolStaticHAddr is set with a non-zero length string, the default value of this object is 'ethernet'. 'tokenRing' indicates that the hardware type is token-ring.rw Enumeration .1.3.6.1.4.1.25506.2.122.2.5.1.5 |
hh3cDhcpServer2PoolStaticStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hh3cDhcpServer2PoolStaticCID or (hh3cDhcpServer2PoolStaticHardAddr and hh3cDhcpServer2PoolStaticHardType) must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.5.1.6 |
hh3cDhcpServer2PoolOptionTableA table for configuring user-defined options for DHCP pools. SEQUENCE OF Hh3cDhcpServer2PoolOptionEntry .1.3.6.1.4.1.25506.2.122.2.6 |
hh3cDhcpServer2PoolOptionEntryAn entry containing the objects for configuring user-defined options for DHCP pools. Hh3cDhcpServer2PoolOptionEntry .1.3.6.1.4.1.25506.2.122.2.6.1 |
hh3cDhcpServer2PoolOptCodeOption code. Integer32 .1.3.6.1.4.1.25506.2.122.2.6.1.1 |
hh3cDhcpServer2PoolOptTypeOption type. 'ascii' means using the ascii string that is defined by hh3cDhcpServer2PoolOptAscii to fill in the option. 'hex' means using the hex string that is defined by hh3cDhcpServer2PoolOptHexStr to fill in the option. 'ip' means using the IP string that is defined by hh3cDhcpServer2PoolOptIPStr to fill in the option.rw Enumeration .1.3.6.1.4.1.25506.2.122.2.6.1.2 |
hh3cDhcpServer2PoolOptAsciiAscii string of an option. If hh3cDhcpServer2PoolOptType is set with 'ascii', this object must be set with a non-zero length string.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.6.1.3 |
hh3cDhcpServer2PoolOptHexStrHex string of an option. The length of the string must be even. If hh3cDhcpServer2PoolOptType is set with 'hex', this object must be set with a non-zero length string.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.6.1.4 |
hh3cDhcpServer2PoolOptIPStrIP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If hh3cDhcpServer2PoolOptType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.6.1.5 |
hh3cDhcpServer2PoolOptRowStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hh3cDhcpServer2PoolOptType must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.6.1.6 |
hh3cDhcpServer2PoolForbidTableA table for configuring forbidden IP for a DHCP server pool. SEQUENCE OF Hh3cDhcpServer2PoolForbidEntry .1.3.6.1.4.1.25506.2.122.2.7 |
hh3cDhcpServer2PoolForbidEntryAn entry for configuring forbidden IP for a DHCP server pool. Hh3cDhcpServer2PoolForbidEntry .1.3.6.1.4.1.25506.2.122.2.7.1 |
hh3cDhcpServer2PoolForbidIPForbidden IP of the DHCP pool. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.7.1.1 |
hh3cDhcpServer2PoolForbidStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.7.1.2 |
hh3cDhcpServer2ClassTableA table for configuring user class to DHCP server. SEQUENCE OF Hh3cDhcpServer2ClassEntry .1.3.6.1.4.1.25506.2.122.2.8 |
hh3cDhcpServer2ClassEntryAn entry for configuring user class to DHCP server. Hh3cDhcpServer2ClassEntry .1.3.6.1.4.1.25506.2.122.2.8.1 |
hh3cDhcpServer2ClassNameDHCP user class name. OCTET STRING .1.3.6.1.4.1.25506.2.122.2.8.1.1 |
hh3cDhcpServer2ClassRowStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.8.1.2 |
hh3cDhcpServer2RuleTableA table for configuring option rules used to match DHCP users. SEQUENCE OF Hh3cDhcpServer2RuleEntry .1.3.6.1.4.1.25506.2.122.2.9 |
hh3cDhcpServer2RuleEntryAn entry for configuring option rules used to match DHCP users. Hh3cDhcpServer2RuleEntry .1.3.6.1.4.1.25506.2.122.2.9.1 |
hh3cDhcpServer2RuleNumberRule number. Integer32 .1.3.6.1.4.1.25506.2.122.2.9.1.1 |
hh3cDhcpServer2RuleOptCodeOption code.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.9.1.2 |
hh3cDhcpServer2RuleOptHexStrHex string of an option. The length of the string must be even.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.9.1.3 |
hh3cDhcpServer2RuleOptMaskThe mask used to match options. The length of this object must be same with that of hh3cDhcpServer2RuleOptHexStr. The SET operation of this object must be with the SET operation of hh3cDhcpServer2RuleOptHexStr.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.9.1.4 |
hh3cDhcpServer2RuleOptOffsetThe option offset used to match users. The SET operation of this object must be with the SET operation of hh3cDhcpServer2RuleOptHexStr, hh3cDhcpServer2RuleOptLength.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.9.1.5 |
hh3cDhcpServer2RuleOptLengthThe option length used to match user options. The SET operation of this object must be with the SET operation of hh3cDhcpServer2RuleOptOffset.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.9.1.6 |
hh3cDhcpServer2RuleRowStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hh3cDhcpServer2RuleOptCode must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.9.1.7 |
hh3cDhcpServer2ForbidTableA table for configuring forbidden IP range to DHCP server. SEQUENCE OF Hh3cDhcpServer2ForbidEntry .1.3.6.1.4.1.25506.2.122.2.10 |
hh3cDhcpServer2ForbidEntryAn entry for configuring forbidden IP range to DHCP server. Hh3cDhcpServer2ForbidEntry .1.3.6.1.4.1.25506.2.122.2.10.1 |
hh3cDhcpServer2ForbidVpnNameName of the VPN instance that the forbidden IP range binds to. If the value of this object is 0x1, the network that the forbidden IP range belongs to is the public network. OCTET STRING .1.3.6.1.4.1.25506.2.122.2.10.1.1 |
hh3cDhcpServer2ForbidStartStart IP of forbidden IP range. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.10.1.2 |
hh3cDhcpServer2ForbidEndEnd IP of forbidden IP range. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.10.1.3 |
hh3cDhcpServer2ForbidRowStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.10.1.4 |
hh3cDhcpServer2FreeTableA table for displaying free IP range for DHCP server. SEQUENCE OF Hh3cDhcpServer2FreeEntry .1.3.6.1.4.1.25506.2.122.2.11 |
hh3cDhcpServer2FreeEntryAn entry for displaying free IP range for DHCP server. Hh3cDhcpServer2FreeEntry .1.3.6.1.4.1.25506.2.122.2.11.1 |
hh3cDhcpServer2FreeStartStart IP of free IP range. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.11.1.1 |
hh3cDhcpServer2FreeEndEnd IP of free IP range.ro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.11.1.2 |
hh3cDhcpServer2ConflictTableA table for displaying the information of conflict IP for DHCP server. SEQUENCE OF Hh3cDhcpServer2ConflictEntry .1.3.6.1.4.1.25506.2.122.2.12 |
hh3cDhcpServer2ConflictEntryAn entry for displaying the information of conflict IP for DHCP server. Hh3cDhcpServer2ConflictEntry .1.3.6.1.4.1.25506.2.122.2.12.1 |
hh3cDhcpServer2ConflictIPConflict IP. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.12.1.1 |
hh3cDhcpServer2ConflictTypeType of the detection of conflict IP. 'detectByServer' denotes that the conflict is detected by DHCP server. 'detectByClient' denotes that the conflict is detected by DHCP client.ro Enumeration .1.3.6.1.4.1.25506.2.122.2.12.1.2 |
hh3cDhcpServer2ConflictTimeTime when the conflict is detected. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).ro OCTET STRING .1.3.6.1.4.1.25506.2.122.2.12.1.3 |
hh3cDhcpServer2ConflictRowStatusRowStatus. Only destroy action is allow to use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.12.1.4 |
hh3cDhcpServer2ExpiredTableA table for displaying the information of expired IP for DHCP Server pools. SEQUENCE OF Hh3cDhcpServer2ExpiredEntry .1.3.6.1.4.1.25506.2.122.2.13 |
hh3cDhcpServer2ExpiredEntryAn entry of objects for displaying information of expired IP for DHCP server pools. Hh3cDhcpServer2ExpiredEntry .1.3.6.1.4.1.25506.2.122.2.13.1 |
hh3cDhcpServer2ExpiredIPExpired IP address. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.13.1.1 |
hh3cDhcpServer2ExpiredClientIdClient identifier or hardware address.ro OCTET STRING .1.3.6.1.4.1.25506.2.122.2.13.1.2 |
hh3cDhcpServer2ExpiredTimeExpired time. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).ro OCTET STRING .1.3.6.1.4.1.25506.2.122.2.13.1.3 |
hh3cDhcpServer2ExpiredRowStatusRowStatus. Only destroy action is allow to use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.13.1.4 |
hh3cDhcpServer2IPInUseTableA table for displaying the information of IP in use for DHCP Server pools. SEQUENCE OF Hh3cDhcpServer2IPInUseEntry .1.3.6.1.4.1.25506.2.122.2.14 |
hh3cDhcpServer2IPInUseEntryAn entry of objects for displaying information of IP in use for DHCP server pools. Hh3cDhcpServer2IPInUseEntry .1.3.6.1.4.1.25506.2.122.2.14.1 |
hh3cDhcpServer2IPInUseIPIp address in use. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.2.14.1.1 |
hh3cDhcpServer2IPInUseClientIdClient identifier.ro OCTET STRING .1.3.6.1.4.1.25506.2.122.2.14.1.2 |
hh3cDhcpServer2IPInUseHardAddrHardware address.ro OCTET STRING .1.3.6.1.4.1.25506.2.122.2.14.1.3 |
hh3cDhcpServer2IPInUseHardTypeHardware address type.ro Enumeration .1.3.6.1.4.1.25506.2.122.2.14.1.4 |
hh3cDhcpServer2IPInUseVlanIdUser's VLAN ID. 65535 means that a client doesn't have VLAN ID or have an invalid VLAN ID.ro Unsigned32(1..4094|65535) .1.3.6.1.4.1.25506.2.122.2.14.1.5 |
hh3cDhcpServer2IPInUseEndLeaseEnd time of lease. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).ro OCTET STRING .1.3.6.1.4.1.25506.2.122.2.14.1.6 |
hh3cDhcpServer2IPInUseTypeType of binding.ro Enumeration .1.3.6.1.4.1.25506.2.122.2.14.1.7 |
hh3cDhcpServer2IPInUseIfIndexInterface index information. If the value of this object is zero, the interface is unknown.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.25506.2.122.2.14.1.8 |
hh3cDhcpServer2IPInUseRowStatusRowStatus. Only destroy action is allow to use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.14.1.9 |
hh3cDhcpServer2DefOptGrpTableA table containing option group of the DHCP server pool for user classes. SEQUENCE OF Hh3cDhcpServer2DefOptGrpEntry .1.3.6.1.4.1.25506.2.122.2.15 |
hh3cDhcpServer2DefOptGrpEntryAn entry containing option group of DHCP pools for user classes. Hh3cDhcpServer2DefOptGrpEntry .1.3.6.1.4.1.25506.2.122.2.15.1 |
hh3cDhcpServer2DefOptGrpClassUser class name. OCTET STRING .1.3.6.1.4.1.25506.2.122.2.15.1.1 |
hh3cDhcpServer2DefOptGrpIdThe option group ID.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.15.1.2 |
hh3cDhcpServer2DefOptGrpStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hh3cDhcpServer2DefOptGrpId must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.15.1.3 |
hh3cDhcpServer2ValidClassTableA table containing valid user classes for DHCP server pool. SEQUENCE OF Hh3cDhcpServer2ValidClassEntry .1.3.6.1.4.1.25506.2.122.2.16 |
hh3cDhcpServer2ValidClassEntryAn entry containing valid user classes for DHCP server pool. Hh3cDhcpServer2ValidClassEntry .1.3.6.1.4.1.25506.2.122.2.16.1 |
hh3cDhcpServer2ValidClassNameUser class name. OCTET STRING .1.3.6.1.4.1.25506.2.122.2.16.1.1 |
hh3cDhcpServer2ValidClassStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.16.1.2 |
hh3cDhcpServer2RuleHwAddrTableA table for configuring hardware address rules used to match DHCP users. SEQUENCE OF Hh3cDhcpServer2RuleHwAddrEntry .1.3.6.1.4.1.25506.2.122.2.17 |
hh3cDhcpServer2RuleHwAddrEntryAn entry for configuring hardware address rules used to match DHCP users. Hh3cDhcpServer2RuleHwAddrEntry .1.3.6.1.4.1.25506.2.122.2.17.1 |
hh3cDhcpServer2RuleHwAddrNumberRule number. Integer32 .1.3.6.1.4.1.25506.2.122.2.17.1.1 |
hh3cDhcpServer2RuleHwAddressHardware address for a rule. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters. The SET operation to this object ought to be with the SET operation of hh3cDhcpServer2RuleHwAddrMask together, and any SET operation alone to this object will be regarded as an invalid operation.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.17.1.2 |
hh3cDhcpServer2RuleHwAddrMaskMask of hardware address for a rule. The structure of the OCTET STRING is the same with hh3cDhcpServer2RuleHwAddress. The SET operation to this object ought to be with the SET operation of hh3cDhcpServer2RuleHwAddress together, and any SET operation alone to this object will be regarded as an invalid operation.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.17.1.3 |
hh3cDhcpServer2RuleHwAddrTypeHardware type for a rule. The codes of all hardware types see ARP section in RFC 1700. The SET operation alone to this object will be regarded as an invalid operation.rw Integer32 .1.3.6.1.4.1.25506.2.122.2.17.1.4 |
hh3cDhcpServer2RuleHwAddrStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hh3cDhcpServer2RuleHwAddrAddress and hh3cDhcpServer2RuleHwAddrMask must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.17.1.5 |
hh3cDhcpServer2OptionGroupTableA table for creating DHCP server option groups. SEQUENCE OF Hh3cDhcpServer2OptionGroupEntry .1.3.6.1.4.1.25506.2.122.2.18 |
hh3cDhcpServer2OptionGroupEntryAn entry containing objects for creating or deleting an option group. Hh3cDhcpServer2OptionGroupEntry .1.3.6.1.4.1.25506.2.122.2.18.1 |
hh3cDhcpServer2OptionGroupIdThe option group ID. Integer32 .1.3.6.1.4.1.25506.2.122.2.18.1.1 |
hh3cDhcpServer2OptionGroupStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.18.1.2 |
hh3cDhcpServer2OptionTableA table for configuring options in an option group. SEQUENCE OF Hh3cDhcpServer2OptionEntry .1.3.6.1.4.1.25506.2.122.2.19 |
hh3cDhcpServer2OptionEntryAn entry containing objects for configuring an option in an option group. Hh3cDhcpServer2OptionEntry .1.3.6.1.4.1.25506.2.122.2.19.1 |
hh3cDhcpServer2OptionCodeOption code. Integer32 .1.3.6.1.4.1.25506.2.122.2.19.1.1 |
hh3cDhcpServer2OptionTypeOption type. 'ascii' means using the ascii string that is defined by hh3cDhcpServer2OptionAscii to fill in the option. 'hex' means using the hex string that is defined by hh3cDhcpServer2OptionHexStr to fill in the option. 'ip' means using the IP string that is defined by hh3cDhcpServer2OptionIPStr to fill in the option.rw Enumeration .1.3.6.1.4.1.25506.2.122.2.19.1.2 |
hh3cDhcpServer2OptionAsciiAscii string of an option. If hh3cDhcpServer2OptionType is set with 'ascii', this object must be set with a non-zero length string.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.19.1.3 |
hh3cDhcpServer2OptionHexStrHex string of an option. The length of the string must be even. If hh3cDhcpServer2OptionType is set with 'hex', this object must be set with a non-zero length string.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.19.1.4 |
hh3cDhcpServer2OptionIPStrIP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If hh3cDhcpServer2OptionType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.2.19.1.5 |
hh3cDhcpServer2OptionRowStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hh3cDhcpServer2OptionType must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.2.19.1.6 |
hh3cDhcpRelay2ScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.122.3 |
hh3cDhcpRelay2ConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.122.3.1 |
hh3cDhcpRelay2UserInfoRecordIf the value is 'true', user information will be recorded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.3.1.1 |
hh3cDhcpRelay2UserInfoRefreshIf the value is 'true', user information will be refreshed on timer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.3.1.2 |
hh3cDhcpRelay2UserInfoFlushTimeUser information refresh interval in seconds. If the value of the object is set to 0, the interval is calculated automatically by the number of user information entries.rw Unsigned32 .1.3.6.1.4.1.25506.2.122.3.1.3 |
hh3cDhcpRelay2ReleaseAddrUser address to be released. The structure of the OCTET STRING is IP address:VPN name. If the VPN instance name is NOT specified, the IP address is in public network.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.3.1.4 |
hh3cDhcpRelay2StatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.122.3.2 |
hh3cDhcpRelay2RxClientNumThe total number of the packets received from DHCP clients by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.1 |
hh3cDhcpRelay2TxClientNumThe total number of the packets transmitted to DHCP clients by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.2 |
hh3cDhcpRelay2RxServerNumThe total number of the packets received from DHCP Servers by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.3 |
hh3cDhcpRelay2TxServerNumThe total number of the packets transmitted to DHCP Servers by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.4 |
hh3cDhcpRelay2BadNumThe total number of the bad packets received.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.5 |
hh3cDhcpRelay2BootpRequestNumThe total number of the BOOTREQUEST packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.6 |
hh3cDhcpRelay2DiscoverNumThe total number of the DHCPDISCOVER packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.7 |
hh3cDhcpRelay2RequestNumThe total number of the DHCPREQUEST packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.8 |
hh3cDhcpRelay2DeclineNumThe total number of the DHCPDECLINE packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.9 |
hh3cDhcpRelay2ReleaseNumThe total number of the DHCPRELEASE packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.10 |
hh3cDhcpRelay2InformNumThe total number of the DHCPINFORM packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.11 |
hh3cDhcpRelay2BootpReplyNumThe total number of the BOOTREPLY packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.12 |
hh3cDhcpRelay2OfferNumThe total number of the DHCPOFFER packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.13 |
hh3cDhcpRelay2AckNumThe total number of the DHCPACK packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.14 |
hh3cDhcpRelay2NakNumThe total number of the DHCPNAK packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.25506.2.122.3.2.15 |
hh3cDhcpRelay2Tables OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.122.4 |
hh3cDhcpRelay2IfConfigTableA table for configuring relay functions for interfaces. SEQUENCE OF Hh3cDhcpRelay2IfConfigEntry .1.3.6.1.4.1.25506.2.122.4.1 |
hh3cDhcpRelay2IfConfigEntryAn entry for configuring relay functions for an interface. Hh3cDhcpRelay2IfConfigEntry .1.3.6.1.4.1.25506.2.122.4.1.1 |
hh3cDhcpRelay2IfSelectRelayIf the value is 'true', the DHCP relay function would be enabled on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.4.1.1.1 |
hh3cDhcpRelay2IfCheckMacIf the value is 'true', the function of checking MAC address of packets received from the interface would be enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.4.1.1.2 |
hh3cDhcpRelay2IfOpt82EnableIf DHCP relay supports option 82 functions, the value is 'true'. If DHCP relay does NOT support option 82 functions, the value is 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.4.1.1.3 |
hh3cDhcpRelay2IfOpt82StrategyThe strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.rw Enumeration .1.3.6.1.4.1.25506.2.122.4.1.1.4 |
hh3cDhcpRelay2IfOpt82CIDModeThe mode of the circuit ID suboption of DHCP option 82. 'normal' is the standard mode. 'verbose' is the detailed mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', hh3cDhcpRelay2IfOpt82CIDStr must also be set.rw Enumeration .1.3.6.1.4.1.25506.2.122.4.1.1.5 |
hh3cDhcpRelay2IfOpt82CIDNodeTypeType of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of hh3cDhcpRelay2IfOpt82CIDMode is set to 'verbose'. The SET operation of this object must be with the SET operation of hh3cDhcpRelay2IfOpt82CIDMode. 'invalid' indicates that the node identifier is NOT used to fill in the circuit ID suboption of option 82. If the value of hh3cDhcpRelay2IfOpt82CIDMode is NOT 'verbose', the value of this object is set to 'invalid' automatically. Otherwise the value of this object cannot be set to 'invalid'. 'mac' indicates that the node identifier is filled in with the MAC of DHCP relay input interface. If the value of hh3cDhcpRelay2IfOpt82CIDMode is set to 'verbose', the default value of this object is 'mac'. 'sysname' indicates that the node identifier is filled in with the sysname of the DHCP relay device. 'userDefine' indicates that the node identifier is filled in with the string defined by the object of hh3cDhcpRelay2IfOpt82CIDNodeStr. If the value is set to 'userDefine', the value of hh3cDhcpRelay2IfOpt82CIDNodeStr must be set to a non-zero length string simultaneously.rw Enumeration .1.3.6.1.4.1.25506.2.122.4.1.1.6 |
hh3cDhcpRelay2IfOpt82CIDNodeStrThe string defined by user to fill in the node identifier in the verbose mode. If the value of hh3cDhcpRelay2IfOpt82CIDMode is NOT 'verbose', or the value of hh3cDhcpRelay2IfOpt82CIDNodeType is NOT 'userDefine', it is set with a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hh3cDhcpRelay2IfOpt82CIDMode and hh3cDhcpRelay2IfOpt82CIDNodeType.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.4.1.1.7 |
hh3cDhcpRelay2IfOpt82CIDStrThe string defined by user to fill in the circuit ID suboption of option 82 in the user-define mode. If the value of hh3cDhcpRelay2IfOpt82CIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hh3cDhcpRelay2IfOpt82CIDMode.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.4.1.1.8 |
hh3cDhcpRelay2IfOpt82CIDFormatThe format of the circuit ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. 'undefine' is the undefine format. If the value of hh3cDhcpRelay2IfOpt82CIDMode is 'normal', the value of this object is set to 'hex' automatically and cannot be set to 'undefine'. If the value of hh3cDhcpRelay2IfOpt82CIDMode is 'verbose', the default value of this object is 'undefine'. If the value of hh3cDhcpRelay2IfOpt82CIDMode is 'userDefine', the value of this object is set to 'ascii' automatically and cannot be set to other value. The SET operation of this object must be with the SET operation of hh3cDhcpRelay2IfOpt82CIDMode.rw Enumeration .1.3.6.1.4.1.25506.2.122.4.1.1.9 |
hh3cDhcpRelay2IfOpt82RIDModeThe mode of the remote ID suboption of DHCP option 82. 'normal' is the standard mode. 'sysname' is the sysname mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', hh3cDhcpRelay2IfOpt82RIDStr must also be set.rw Enumeration .1.3.6.1.4.1.25506.2.122.4.1.1.10 |
hh3cDhcpRelay2IfOpt82RIDStrThe string defined by user to fill in the remote ID in the user-defined mode. If the value of hh3cDhcpRelay2IfOpt82RIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hh3cDhcpRelay2IfOpt82RIDMode.rw OCTET STRING .1.3.6.1.4.1.25506.2.122.4.1.1.11 |
hh3cDhcpRelay2IfOpt82RIDFormatThe format of the remote ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. If the value of hh3cDhcpRelay2IfOpt82RIDMode is 'sysname' or 'userDefine', this object is set with 'ascii' automatically and cannot be set with other value. If the value of hh3cDhcpRelay2IfOpt82RIDMode is 'normal', the default value of this object is 'hex'. The SET operation of this object must be with the SET operation of hh3cDhcpRelay2IfOpt82RIDMode.rw Enumeration .1.3.6.1.4.1.25506.2.122.4.1.1.12 |
hh3cDhcpRelay2SrvAddrTableA table for configuring a DHCP server address on the interface. SEQUENCE OF Hh3cDhcpRelay2SrvAddrEntry .1.3.6.1.4.1.25506.2.122.4.2 |
hh3cDhcpRelay2SrvAddrEntryAn entry for configuring a DHCP server address on the interface. Hh3cDhcpRelay2SrvAddrEntry .1.3.6.1.4.1.25506.2.122.4.2.1 |
hh3cDhcpRelay2SrvAddrIPIp address of DHCP server. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.4.2.1.1 |
hh3cDhcpRelay2SrvAddrRowStatusOperation status of this table entry. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.4.2.1.2 |
hh3cDhcpRelay2UserInfoTableA table containing the user information of DHCP client. SEQUENCE OF Hh3cDhcpRelay2UserInfoEntry .1.3.6.1.4.1.25506.2.122.4.3 |
hh3cDhcpRelay2UserInfoEntryAn entry containing the user information of DHCP client. Hh3cDhcpRelay2UserInfoEntry .1.3.6.1.4.1.25506.2.122.4.3.1 |
hh3cDhcpRelay2UserInfoVpnIndexVPN index of the DHCP client. Unsigned32(0 .. 65534) .1.3.6.1.4.1.25506.2.122.4.3.1.1 |
hh3cDhcpRelay2UserInfoIpAddrDHCP client's IP address. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.122.4.3.1.2 |
hh3cDhcpRelay2UserInfoMacAddrDHCP client's MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.4.3.1.3 |
hh3cDhcpRelay2UserInfoIfIndexThe index of the interface that DHCP client adhered to. 0 means that no interface information is recorded in the user information entry.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.25506.2.122.4.3.1.4 |
hh3cDhcpRelay2UserInfoRowStatusOperation status of this table entry. Only destroy action is allow to use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.122.4.3.1.5 |