HH3C-BGP4V2-MIB
The HH3C-BGP4V2-MIB module enables monitoring and management of BGP4+ (IPv6) routing sessions and state transitions on H3C network devices, exposing critical metrics such as peer adjacency states, route advertisement counts, and protocol error counters.
Imported Objects
Objects
17 total| Object Name |
|---|
hh3cBgp4v2The MIB module for the BGP4+ protocol. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.183 |
hh3cBgp4v2Notification OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.183.0 |
hh3cBgp4v2EstablishedThe hh3cBgp4v2Established event is generated when the BGP4+ FSM enters the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.183.0.1 |
hh3cBgp4v2BackwardTransitionThe hh3cBgp4v2BackwardTransition event is generated when the BGP4+ FSM moves from a higher numbered state to a lower numbered state. Due to the nature of the BGP state machine, an implementation MAY rate limit the generation of this event. An implementation MAY also generate this notification ONLY when the state machine moves out of the established state. An implementation should document its specific behavior. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.183.0.2 |
hh3cBgp4v2Objects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.183.1 |
hh3cBgp4v2PeerTableBGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. SEQUENCE OF Hh3cBgp4v2PeerEntry .1.3.6.1.4.1.25506.2.183.1.1 |
hh3cBgp4v2PeerEntryEntry containing information about the connection with a BGP peer. Hh3cBgp4v2PeerEntry .1.3.6.1.4.1.25506.2.183.1.1.1 |
hh3cBgp4v2PeerRemoteAddrThe remote IPv6 address of this entry's BGP peer.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.183.1.1.1.1 |
hh3cBgp4v2PeerLastErrorThe last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.ro OCTET STRING .1.3.6.1.4.1.25506.2.183.1.1.1.2 |
hh3cBgp4v2PeerStateThe BGP peer connection state.ro Enumeration .1.3.6.1.4.1.25506.2.183.1.1.1.3 |
hh3cBgp4v2Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.183.2 |
hh3cBgp4v2Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.183.2.1 |
hh3cBgp4v2ComplianceThe compliance statement for entities which implement the BGP4+ mib. Unknown .1.3.6.1.4.1.25506.2.183.2.1.1 |
hh3cBgp4v2Groups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.183.2.2 |
hh3cBgp4v2ErrorsGroupErrors received on BGP peering sessions. Unknown .1.3.6.1.4.1.25506.2.183.2.2.1 |
hh3cBgp4v2PeerGroupCore object types on BGP peering sessions. Unknown .1.3.6.1.4.1.25506.2.183.2.2.2 |
hh3cBgp4v2NotificationGroupNotifications in this modules are completely optional. Unknown .1.3.6.1.4.1.25506.2.183.2.2.3 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →SNMP MIB module
SNMP MIB module
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
SNMP MIB module