HH3C-ATM-DXI-MIB
AI MIB Summary
The HH3C-ATM-DXI-MIB module enables configuration and monitoring of ATM Digital Cross-Connect Interface (DXI) parameters on H3C network devices, specifically managing the integration of ATM networks with legacy TDM infrastructure via the DXI protocol.
This MIB contains objects to manage configuration of ATM-DXI. There are no constraints on this MIB.
Main OID:
hh3cAtmDxi.1.3.6.1.4.1.25506.2.49
25
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
hh3cAtmDxiThis MIB contains objects to manage configuration of ATM-DXI.
There are no constraints on this MIB. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.49 |
hh3cAtmDxiScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.49.1 |
hh3cAtmDxiConfModeThis node identifies the ATM-DXI mode being
used at the ATM-DXI port.ro Enumeration .1.3.6.1.4.1.25506.2.49.1.1 |
hh3cAtmDxiIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.49.2 |
hh3cAtmDxiPvcTableThis table describes information of PVC in ATM-DXI interface. SEQUENCE OF Hh3cAtmDxiPvcEntry .1.3.6.1.4.1.25506.2.49.2.1 |
hh3cAtmDxiPvcEntryThe entry of hh3cAtmDxiPvcTable. Hh3cAtmDxiPvcEntry .1.3.6.1.4.1.25506.2.49.2.1.1 |
hh3cAtmDxiPvcVpiThe value of VPI. It can't be 0 if hh3cAtmDxiPvcVci is 0. Integer32 .1.3.6.1.4.1.25506.2.49.2.1.1.1 |
hh3cAtmDxiPvcVciThe value of VCI. It can't be 0 if hh3cAtmDxiPvcVpi is 0. Integer32 .1.3.6.1.4.1.25506.2.49.2.1.1.2 |
hh3cAtmDxiPvcDFAThe index of PVC. It is equal with vci and VPI. And this node value
is correlate with hh3cAtmDxiPvcVpi and hh3cAtmDxiPvcVci.rw Integer32 .1.3.6.1.4.1.25506.2.49.2.1.1.3 |
hh3cAtmDxiPvcEncTypeEncapsulation type of the frame.rw Enumeration .1.3.6.1.4.1.25506.2.49.2.1.1.4 |
hh3cAtmDxiPvcMapCountThe number of map. One map can only associate with one PVC, but
one PVC can associate with 32 maps. This node is the map count
which one PVC associated with.rw Integer32 .1.3.6.1.4.1.25506.2.49.2.1.1.5 |
hh3cAtmDxiPvcRowStatusOnly support 'destroy' 'createAndGo' and 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.49.2.1.1.6 |
hh3cAtmDxiMapTableThis table describes PVC map information. SEQUENCE OF Hh3cAtmDxiMapEntry .1.3.6.1.4.1.25506.2.49.2.2 |
hh3cAtmDxiMapEntryThe entry of hh3cAtmDxiMapTable. Hh3cAtmDxiMapEntry .1.3.6.1.4.1.25506.2.49.2.2.1 |
hh3cAtmDxiMapPeerIpTypeThe type of ip address: IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.49.2.2.1.1 |
hh3cAtmDxiMapPeerIpThe peer ip address. This ip address is the peer ip
address which the frame will arrive. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.49.2.2.1.2 |
hh3cAtmDxiMapPvcVpiThe VPI of PVC. It can't be 0 if hh3cAtmDxiMapPvcVci is 0. Integer32 .1.3.6.1.4.1.25506.2.49.2.2.1.3 |
hh3cAtmDxiMapPvcVciThe VCI of PVC. It can't be 0 if hh3cAtmDxiMapPvcVpi is 0. Integer32 .1.3.6.1.4.1.25506.2.49.2.2.1.4 |
hh3cAtmDxiMapTypePvc map type. Enumeration .1.3.6.1.4.1.25506.2.49.2.2.1.5 |
hh3cAtmDxiMapInarpTimeThe interval time of inarp request. This node describes
the interval time inarp request frame sent. If the hh3cAtmDxiMapType
isn't inarp, this value is 0. Its unit is minute.rw Integer32 (0 | 5..10) .1.3.6.1.4.1.25506.2.49.2.2.1.6 |
hh3cAtmDxiMapBroEnableWhether ATM-DXI map enable broadcast or not.rw Enumeration .1.3.6.1.4.1.25506.2.49.2.2.1.7 |
hh3cAtmDxiMapRowStatusOnly support 'destroy', 'createAndGo' and 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.49.2.2.1.8 |
hh3cAtmDxiConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.49.3 |
hh3cAtmDxiCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.49.3.1 |
hh3cAtmDxiGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.49.3.2 |