H245-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
171
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
171 total| Object Name |
|---|
h245 MODULE-IDENTITY .0.0.8.341.1.3.1 |
h245Configuration OBJECT IDENTIFIER .0.0.8.341.1.3.1.1 |
h245ConfigurationTableThis table contains information about H.245 configuration parameters. It is a list of configuration parameter entries. The number of entries equals to the number of H.245 stacks in a system. SEQUENCE OF H245ConfigurationTableEntry .0.0.8.341.1.3.1.1.1 |
h245ConfigurationTableEntryIt contains objects that describe the H.245 configuration parameters. H245ConfigurationTableEntry .0.0.8.341.1.3.1.1.1.1 |
h245ConfigT101TimerThis timer is used during Capability Exchange procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no TerminalCapabilitySetAck or TerminalCapabilitySetReject message may be received.rw Integer32 .0.0.8.341.1.3.1.1.1.1.1 |
h245ConfigT102TimerThis timer is used during Maintenance Loop procedure. This timer is used during the AWAITING RESPONSE state. It specifies the maximum allowed time during which no MaintenanceLoopAck or MaintenanceLoopReject message may be received .rw Integer32 .0.0.8.341.1.3.1.1.1.1.2 |
h245ConfigT103TimerThis timer is used during Uni-directional and Bi-directional Logical Channel Signalling procedure. This timer is used in the AWAITING ESTABLISHMENT and AWAITING RELEASE states. It specifies the maximum time during which no OpenLogicalChannelAck or OpenLogicalChannelReject or CloseLogicalChannelAck message may be received.rw Integer32 .0.0.8.341.1.3.1.1.1.1.3 |
h245ConfigT104TimerThis timer is used during H.223 Multiplex Table procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no MultiplexEntrySendAck or MultiplexEntrySendReject message may be received.rw Integer32 .0.0.8.341.1.3.1.1.1.1.4 |
h245ConfigT105TimerThis timer is used during Round Trip Delay procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no RoundTripDelayResponse message may be received.rw Integer32 .0.0.8.341.1.3.1.1.1.1.5 |
h245ConfigT106TimerThis timer is used during Master Slave Determination procedure. This timer is used in the OUTGOING AWAITING RESPONSE state and during the INCOMING AWAITING RESPONSE state. It specifies the maximum time during which no acknowledgement message may be received.rw Integer32 .0.0.8.341.1.3.1.1.1.1.6 |
h245ConfigT107TimerThis timer is used during Request Multiplex Entry procedure. This timer is used during the AWAITING RESPONSE state. It specifies the maximum time during which no RequestMultiplexEntryAck or RequestMultiplexEntryReject message may be received.rw Integer32 .0.0.8.341.1.3.1.1.1.1.7 |
h245ConfigT108TimerThis timer is used during SEND Logical Channel procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no RequestMultiplexEntryAck or RequestMultiplexEntryReject message may be received.rw Integer32 .0.0.8.341.1.3.1.1.1.1.8 |
h245ConfigT109TimerThis timer is used during Mode Request procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no RequestModeAck or RequestModeReject message may be received.rw Integer32 .0.0.8.341.1.3.1.1.1.1.9 |
h245ConfigN100CounterThis counter specifies the maximum number of times that MasterSlaveDetermination messages will be sent during the OUTGOING AWAITING RESPONSE state.rw Integer32 .0.0.8.341.1.3.1.1.1.1.10 |
h245ControlChannel OBJECT IDENTIFIER .0.0.8.341.1.3.1.2 |
h245ControlChannelStatsTableThis table contains information about H.245 statistics. It is a list of statistics entries. The number of entries equals to the number of control channels for all H.245 stacks in a system. SEQUENCE OF H245ControlChannelStatsTableEntry .0.0.8.341.1.3.1.2.1 |
h245ControlChannelStatsTableEntryIt contains objects that describe the H.245 control channel statistics. H245ControlChannelStatsTableEntry .0.0.8.341.1.3.1.2.1.1 |
h245ControlChannelNumberOfListenPortsThe number of H245 Listen ports. These ports are used for the remote entity to send a connect onro Integer32 .0.0.8.341.1.3.1.2.1.1.1 |
h245ControlChannelMaxConnectionsThe number of maximum active h245 channels allowed.ro Integer32 .0.0.8.341.1.3.1.2.1.1.2 |
h245ControlChannelNumberOfListenFailsThe number of Listen fails. The fail could be due to exhaustion of system resourcesro Integer32 .0.0.8.341.1.3.1.2.1.1.3 |
h245ControlChannelNumberOfActiveConnectionsThe number of the active H245 connections.ro Integer32 .0.0.8.341.1.3.1.2.1.1.4 |
h245ControlChannelMasterSlaveMaxRetriesThe number of maximum master slave retries. Reties are needed when the result of master slave process is indeterminatero Integer32 .0.0.8.341.1.3.1.2.1.1.5 |
h245ControlChannelConnectionAttemptsFailThe number of failures when trying to connect to a listen port.ro Counter32 .0.0.8.341.1.3.1.2.1.1.6 |
h245ControlChanneMasterSlavelDeterminationsThe number of MSD messages sent from a MSDSE to a peer MSDSE for master/slave determination purpose.ro Counter32 .0.0.8.341.1.3.1.2.1.1.7 |
h245ControlChannelMasterSlaveAcksThe number of acks that are used to confirm whether the terminal is the master terminal or the slave terminal, as indicated by decision. When decision is of type master, the terminal receiving this message is the master terminal and when decision is of type slave, it is the slave terminal.ro Counter32 .0.0.8.341.1.3.1.2.1.1.8 |
h245ControlChannelMasterSlaveRejectsThe number of rejects of the MasterSlaveDetermination message.ro Counter32 .0.0.8.341.1.3.1.2.1.1.9 |
h245ControlChannelMasterSlaveT106RejectsThe number of rejects of the MasterSlaveDetermination message. When the cause is of type identicalNumbers, the rejection was due to the random numbers being equivalent and the terminal types being the same.ro Counter32 .0.0.8.341.1.3.1.2.1.1.10 |
h245ControlChannelMasterSlaveMSDRejectsThe number of MSD rejects of the MasterSlaveDetermination message. Rejects can happen due to different reasons like identical random number after maximum tries, timeouts...ro Counter32 .0.0.8.341.1.3.1.2.1.1.11 |
h245ControlChannelNumberOfMasterSlaveInconsistentFieldRejectsThe number of rejects of the MasterSlaveDetermination message. The cause is due to conflict in the status that both entities arrive to.ro Counter32 .0.0.8.341.1.3.1.2.1.1.12 |
h245ControlChannelMasterSlaveMaxCounterRejectsThe number of rejects of the MasterSlaveDetermination message. There are many reasons why the rejection could happen.ro Counter32 .0.0.8.341.1.3.1.2.1.1.13 |
h245ControlChannelMasterSlaveReleasesThe number of rejects due to a time out.ro Counter32 .0.0.8.341.1.3.1.2.1.1.14 |
h245ControlChannelNumberOfTunnelsThe number of the active H245 tunnels.ro Integer32 .0.0.8.341.1.3.1.2.1.1.15 |
h245ControlChannelMasterSlaveTableThis table contains information about entities that are connected to this entity. It is a list of connection entries. The number of entries equals to the number of active connections. SEQUENCE OF H245ControlChannelMasterSlaveTableEntry .0.0.8.341.1.3.1.2.2 |
h245ControlChannelMasterSlaveTableEntryIt contains objects that describe the status of the master slave determination procedure. H245ControlChannelMasterSlaveTableEntry .0.0.8.341.1.3.1.2.2.1 |
h245ControlChannelSrcAddressTagIt describes the type of address (IP v4, IPv6...) of the source MmTAddressTag (MULTI-MEDIA-MIB-TC) .0.0.8.341.1.3.1.2.2.1.1 |
h245ControlChannelSrcTransporTAddressSource transport address. TAddress (SNMPv2-TC) .0.0.8.341.1.3.1.2.2.1.2 |
h245ControlChannelDesTAddressTagIt describes the type of address (IP v4, IPv6...) of the source MmTAddressTag (MULTI-MEDIA-MIB-TC) .0.0.8.341.1.3.1.2.2.1.3 |
h245ControlChannelDestTransporTAddressRemote transport address. TAddress (SNMPv2-TC) .0.0.8.341.1.3.1.2.2.1.4 |
h245ControlChannelIndexIt is an arbitrary number that is being incremented by 1 for every entry in this tablero Integer32 .0.0.8.341.1.3.1.2.2.1.5 |
h245ControlChannelMSDStateIt describes the state of the master slave determination procdure. It can be OUTGOING WAITING RESPONSE, INCOMING WAITING RESPONSE, IDLEro Enumeration .0.0.8.341.1.3.1.2.2.1.6 |
h245ControlChannelTerminalTypeTerminal type represents the type of H.323 terminal: 50 - terminal without MC 60 - gateway without MC 70 - terminal with MC but without MP 80 - gateway with MC but without MP 120 - gatekeeper with MC but without MP 160 - MCU with MC but without MP 90 - gateway with MC and Data MP 130 - gatekeeper with MC and Data MP 170 - MCU with MC and Data MP 100 - gateway containing MC with Data and audio MP 140 - gatekeeper containing MC with Data and audio MP 180 - MCU containing MC with Data and audio MP 110 - gateway containing MC with Data, Audio and Video MP 150 - gatekeeper containing MC with Data, Audio and Video MP 190 - MCU containing MC with Data, Audio and Video MP 240 - entity with active MC .ro MmH323EndpointType (MULTI-MEDIA-MIB-TC) .0.0.8.341.1.3.1.2.2.1.7 |
h245ControlChannelNumberOfMSDRetriesThe number of tries of master slave determination before a meaningful result is concluded.ro Integer32 .0.0.8.341.1.3.1.2.2.1.8 |
h245ControlChannelIsTunnelingThis variable indicates if tunneling is used for this channel.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.2.2.1.9 |
h245CapExchange OBJECT IDENTIFIER .0.0.8.341.1.3.1.3 |
h245CapExchangeStatsTableThis table contains information about H.245 statistics for capabilities exchange procedure. It is a list of cap exchange statistics entries. The number of entries equals to the number of H.245 stacks in a system. SEQUENCE OF H245CapExchangeStatsTableEntry .0.0.8.341.1.3.1.3.1 |
h245CapExchangeStatsTableEntryIt contains objects that describe statistics for H.245 cap exchange procedure. H245CapExchangeStatsTableEntry .0.0.8.341.1.3.1.3.1.1 |
h245CapExchangeSetsThe total number of TerminalCapabilitySets that were sent and received by the local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySet is used for the intention to signal a terminal's capabilities to ensure that the only multimedia signals to be transmitted are those that can be received and treated appropriately by the receive terminal.ro Counter32 .0.0.8.341.1.3.1.3.1.1.1 |
h245CapExchangeAcksThe total number of TerminalCapabilitySetAcks that were sent and received by local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySetAck is used as a confirmation for a TerminalCapabilitySet that was successfully received and processed.ro Counter32 .0.0.8.341.1.3.1.3.1.1.2 |
h245CapExchangeRejectsThe total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySetReject is used to indicate a failure due to a specific error for a TerminalCapabilitySet that was received, but, yet to be fully processed.ro Counter32 .0.0.8.341.1.3.1.3.1.1.3 |
h245CapExchangeRejectUnspecifiedThe total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set to unspecified. This means that there was no cause for the rejection of a TerminalCapabilitySet specified.ro Counter32 .0.0.8.341.1.3.1.3.1.1.4 |
h245CapExchangeRejectUndefinedTableEntryUsedThe total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set to undefinedTableEntryUsed. This means that the cause of the rejection of a TerminalCapabilitySet was due to a capability descriptor made reference to a capability table entry number in the capability table of the TerminalCapabilitySet was not defined.ro Counter32 .0.0.8.341.1.3.1.3.1.1.5 |
h245CapExchangeRejectDescriptorCapacityExceededThe total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set to descriptorCapacityExceeded. This means that the cause of the rejection of a TerminalCapabilitySet was due to a terminal incapable of storing all of the information from the capabilityDescriptors of the TerminalCapabilitySet.ro Counter32 .0.0.8.341.1.3.1.3.1.1.6 |
h245CapExchangeRejectTableEntryCapacityExeededThe total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set to tableEntryCapacityExceeded. This means that the cause of the rejection of a TerminalCapabilitySet was due to a terminal incapable of storing some (indicated in the highestEntryNumberProcessed) or all (indicated in the noneProcessed) of the information from the capability table of the TerminalCapabilitySet.ro Counter32 .0.0.8.341.1.3.1.3.1.1.7 |
h245CapExchangeReleasesThe total number of TerminalCapabilitySetReleases that were sent and received by the local CESE (Capability Exchange Signalling Entity). This means that a response for a TerminalCapabilitySet was not received/issued in time. A timer expiry had occurred for the local CESE.ro Counter32 .0.0.8.341.1.3.1.3.1.1.8 |
h245CapExchangeCapabilityTableContains all the local incoming and outgoing CESEs (Capability Exchange Signalling Entity) that currently exists in this terminal. SEQUENCE OF H245CapExchangeCapabilityTableEntry .0.0.8.341.1.3.1.3.2 |
h245CapExchangeCapabilityTableEntryEach entry contains either the local incoming or outgoing CESE (Capability Exchange Signalling Entity) that is derived from a particular H.245 Control Channel, Logical Channel 0, or H.245 session. H245CapExchangeCapabilityTableEntry .0.0.8.341.1.3.1.3.2.1 |
h245CapExchangeDirectionRepresents either the local incoming CESE or the local outgoing CESE (Capability Exchange Signalling Entity). Enumeration .0.0.8.341.1.3.1.3.2.1.1 |
h245CapExchangeStateThe current state of this CESE (Capability Exchange Signalling Entity).ro Enumeration .0.0.8.341.1.3.1.3.2.1.2 |
h245CapExchangeProtocolIdThe version of the H.245 protocol used. This specifies how H.245 messages are formatted and used.ro OCTET STRING ( SIZE .0.0.8.341.1.3.1.3.2.1.3 |
h245CapExchangeRejectCauseThe latest reject cause value extracted from the latest TerminalCapabilitySetReject.ro Enumeration .0.0.8.341.1.3.1.3.2.1.4 |
h245CapExchangeMultiplexCapabilityThe latest multiplexCapability extracted from a TerminalCapabilitySet.ro DisplayString (SNMPv2-TC) .0.0.8.341.1.3.1.3.2.1.5 |
h245CapExchangeCapabilityThe latest capabilityTable extracted from the latest TerminalCapabilitySet.ro DisplayString (SNMPv2-TC) .0.0.8.341.1.3.1.3.2.1.6 |
h245CapExchangeCapabilityDescriptorsThe latest capabilityDescriptors extracted from the latest TerminalCapabilitySet.ro DisplayString (SNMPv2-TC) .0.0.8.341.1.3.1.3.2.1.7 |
h245LogChannels OBJECT IDENTIFIER .0.0.8.341.1.3.1.4 |
h245LogChannelsChannelTableContains all the local incoming and outgoing LCSEs (Uni or Bi-directional Logical Channel Signalling Entity) that currently exist in this terminal with their logical channels open or in the process of being opened or closed. SEQUENCE OF H245LogChannelsChannelTableEntry .0.0.8.341.1.3.1.4.1 |
h245LogChannelsChannelTableEntryEach entry contains either the local incoming or outgoing LCSE (Uni or Bi-directional Logical Channel Signalling Entity) that is derived from a particular H.245 Control Channel, Logical Channel 0, or H.245 session with its logical channels that are currently open or in the process of being opened or closed. H245LogChannelsChannelTableEntry .0.0.8.341.1.3.1.4.1.1 |
h245LogChannelsChannelNumberThe forwardLogicalChannelNumber used to distinguish this media channel by this LCSE (Uni or Bi-directional Logical Channel Signalling Entity). Integer32 .0.0.8.341.1.3.1.4.1.1.1 |
h245LogChannelsChannelDirectionRepresents the direction of this media channel used by this LCSE (Uni or Bi-directional Logical Channel Signalling Entity) . Enumeration .0.0.8.341.1.3.1.4.1.1.2 |
h245LogChannelsIndexA unique value representing this media channel.ro Integer32 .0.0.8.341.1.3.1.4.1.1.3 |
h245LogChannelsChannelStateThe current state of the media channel which also represents the state of this LCSE (Uni or Bi-directional Logical Channel Signalling Entity).ro Enumeration .0.0.8.341.1.3.1.4.1.1.4 |
h245LogChannelsMediaTableTypeThe actual media or data type used for this logical channel.ro Enumeration .0.0.8.341.1.3.1.4.1.1.5 |
h245LogChannelsH225TableContains the H2250LogicalChannelParameters that are used in all of the logical channels that are currently opened on this terminal. SEQUENCE OF H245LogChannelsH225TableEntry .0.0.8.341.1.3.1.4.2 |
h245LogChannelsH225TableEntryEach entry contains the actual specifics and options used in the H2250LogicalChannelParameters within a particular open logical channel. H245LogChannelsH225TableEntry .0.0.8.341.1.3.1.4.2.1 |
h245LogChannelsSessionIdA unique RTP or T.120 Session Identifier in a conference. It is used by the transmitter to refer to the session to which the logical channel applies.ro Integer32 .0.0.8.341.1.3.1.4.2.1.1 |
h245LogChannelsAssociateSessionIdThis is used to associate one session with another in a conference. A typical use will be to associate an audio session with a video session to indicate which sessions to process for lip synchronization.ro Integer32 .0.0.8.341.1.3.1.4.2.1.2 |
h245LogChannelsMediaChannelIndicates a transporTAddress to be used for the logical channel.ro TAddress (SNMPv2-TC) .0.0.8.341.1.3.1.4.2.1.3 |
h245LogChannelsMediaGuaranteedDeliveryIndicates whether or not the underlying media transport should be selected to provide or not to provide guaranteed delivery of data.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.4.2.1.4 |
h245LogChannelsMediaControlChannelIndicates the media control channel in which the sender of the open logical channel will be listening for media control messages for this session. This field is present only when a media control channel is required.ro TAddress (SNMPv2-TC) .0.0.8.341.1.3.1.4.2.1.5 |
h245LogChannelsMediaControlGuaranteedDeliveryIndicates whether or not the underlying media control transport should be selected to provide or not to provide guaranteed delivery of data. This field is present only when a media control channel is required.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.4.2.1.6 |
h245LogChannelsSilenceSuppressionIndicates whether the transmitter stops sending packets during times of silence for bandwidth reasons. This can only be enabled for an audio channel only.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.4.2.1.7 |
h245LogChannelsDestinationIndicates the terminal label (composed of a mcu number and a terminal number) of the destination if one has been assigned.ro OCTET STRING .0.0.8.341.1.3.1.4.2.1.8 |
h245LogChannelsDynamicRTPPayloadTypeIndicates a dynamic payload value which is used in H.323 for the H.225.0 alternative H.261 video packetization scheme. This field is present only when a dynamic RTP payload is in use.ro Integer32 .0.0.8.341.1.3.1.4.2.1.9 |
h245LogChannelsH261aVideoPacketizationIndicates that the H.261 alternative RTP payload form is in use as described in H.225.0.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.4.2.1.10 |
h245LogChannelsRTPPayloadDescriptorIf the rfc-number is chosen, it indicates the offical document of the IETF in which the payload format is defined (OID). Obsolete RFCs should not be referenced here. If the oid component is chosen, this identifies a payload format specified as part of a Recommendation defined by the ITU or an International Standard defined by the ISO and registered in the respective document under this Object Indentifier.ro OCTET STRING .0.0.8.341.1.3.1.4.2.1.11 |
h245LogChannelsRTPPayloadTypeIndicates which payload type value used. If the dynamic payload type is used, the values of this field and the logChannelsDynamicRTPPayloadType should match.ro Integer32 .0.0.8.341.1.3.1.4.2.1.12 |
h245LogChannelsTransportCapabilityIndicates optional transport capabilites such as quality of service and median channel type capabilites.ro DisplayString (SNMPv2-TC) .0.0.8.341.1.3.1.4.2.1.13 |
h245LogChannelsRedundancyEncodingIndicates which redundancy encoding modes are supported (if any). The redundancyEncoding indicates that the redundant encoding method indicated in this parameter is to be used for this logical channel. The primary encoding is defined by the dataType of the forwardLogicalChannelParameters or the reverseLogicalChannelParameters, respectively. The type of redundancy encoding to be applied for this logical channel is identified by the redundancyEncodingMethod parameter, the secondary encoding is specified in the secondaryEncoding parameter. The DataType (audio, video, etc.) selected for both primary and secondary encoding shall match and shall be in accordance with the redundancyEncodingMethod selected.ro DisplayString (SNMPv2-TC) .0.0.8.341.1.3.1.4.2.1.14 |
h245LogChannelsSrcTerminalLabelThis is used to identify the terminal number of the sender of the OpenLogicalChannel message.ro OCTET STRING .0.0.8.341.1.3.1.4.2.1.15 |
h245LogChannelOpenLogicalChannelTableThis table contains information about statistics for H.245 open logical channels.It is a list of statistics entries. The number of entries equals to the number of control channels for all H.245 stacks in a system. SEQUENCE OF H245LogChannelOpenLogicalChannelTableEntry .0.0.8.341.1.3.1.4.3 |
h245LogChannelOpenLogicalChannelTableEntryIt contains objects that describe statistics for H.245 open logical channel procedure. H245LogChannelOpenLogicalChannelTableEntry .0.0.8.341.1.3.1.4.3.1 |
h245LogChanOpenLogChanTotalRequestsThe total number of attempts to open a uni-directional logical channel between an outgoing LCSE and a peer incoming LCSE and a bi-directional logical channel between an outgoing B-LCSE and a peer incoming B-LCSE.ro Counter32 .0.0.8.341.1.3.1.4.3.1.1 |
h245LogChanOpenLogChanAcksThe total number of confirmations to accept an open logical channel request. This would represent the final stage of establishing a uni-directional channel that can be used for transmission.ro Counter32 .0.0.8.341.1.3.1.4.3.1.2 |
h245LogChanOpenLogChanConfirmsThe total number of confirmations used for the purpose of bi-directional channel signaling that the reverse channel is open and can be used for transmission. This represents the final stage of establishing a bi-directional channel that can be used for transmission in both directions.ro Counter32 .0.0.8.341.1.3.1.4.3.1.3 |
h245LogChanOpenLogChanRejectsThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE.ro Counter32 .0.0.8.341.1.3.1.4.3.1.4 |
h245LogChanOpenLogChanRejectUnspecifiedThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was unspecified.ro Counter32 .0.0.8.341.1.3.1.4.3.1.5 |
h245LogChanOpenLogChanRejectUnsuitableReverseParametersThe total number of rejections used as a response to a request to open a bi-directional logical channel from a B-LCSE when the reason for the rejection was the reverseLogicalChannelParameters in the OpenLogicalChannel were inappropriate.ro Counter32 .0.0.8.341.1.3.1.4.3.1.6 |
h245LogChanOpenLogChanRejectDataTypeNotSupportedThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a terminal not capable of supporting the desired dataType.ro Counter32 .0.0.8.341.1.3.1.4.3.1.7 |
h245LogChanOpenLogChanRejectDataTypeNotAvailableThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a terminal not capable of supporting the desired dataType simultaneously with the dataTypes of logical channels that are already open.ro Counter32 .0.0.8.341.1.3.1.4.3.1.8 |
h245LogChanOpenLogChanRejectUnknownDataTypeThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a terminal not understanding the dataType indicated in the OpenLogicalChannel.ro Counter32 .0.0.8.341.1.3.1.4.3.1.9 |
h245LogChanOpenLogChanRejectDataTypeALCombinationNotSupportedThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a terminal not capable of supporting the dataType indicated in OpenLogicalChannel simultaneously with the Adaptation Layer type indicated in H223LogicalChannelParameters.ro Counter32 .0.0.8.341.1.3.1.4.3.1.10 |
h245LogChanOpenLogChanRejectMulticastChannelNotAllowedThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a multicast Channel that could not be opened.ro Counter32 .0.0.8.341.1.3.1.4.3.1.11 |
h245LogChanOpenLogChanRejectInsuffientBandwdithThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was because permission to use the requested bandwidth for the logical channel was denied.ro Counter32 .0.0.8.341.1.3.1.4.3.1.12 |
h245LogChanOpenLogChanRejectSeparateStackEstablishmentFailedThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a request to run the data portion of a call on a separate stack failed.ro Counter32 .0.0.8.341.1.3.1.4.3.1.13 |
h245LogChanOpenLogChanRejectInvalidSessionIDThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to an attempt by a slave to set the SessionID when opening a logical channel to the master.ro Counter32 .0.0.8.341.1.3.1.4.3.1.14 |
h245LogChanOpenLogChanRejectMasterSlaveConflictThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to an attempt by a slave to open a logical channel in which the master has determined a conflict may occur.ro Counter32 .0.0.8.341.1.3.1.4.3.1.15 |
h245LogChanOpenLogChanRejectWaitForCommunicationModeThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to an attempt to open a logical channel before MC has transmitted the CommunicationModeCommand.ro Counter32 .0.0.8.341.1.3.1.4.3.1.16 |
h245LogChanOpenLogChanRejectInvalidDependentChannelThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to an attempt to open a logical channel with a dependent channel specified which is not present.ro Counter32 .0.0.8.341.1.3.1.4.3.1.17 |
h245LogChansOpenLogChanRejectReplacementForRejectedThe total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a logical channel of the type attempted cannot be opened using the replacementFor parameter.ro Counter32 .0.0.8.341.1.3.1.4.3.1.18 |
h245LogChannelCloseLogicalChannelTableThis table contains information about H.245 statistics for close logical channel procedure. It is a list of statistics entries. The number of entries equals to the number of control channels for all H.245 stacks in a system. SEQUENCE OF H245LogChannelCloseLogicalChannelTableEntry .0.0.8.341.1.3.1.4.4 |
h245LogChannelCloseLogicalChannelTableEntryIt contains objects that describe statistics for H.245 close logical channel procedure. H245LogChannelCloseLogicalChannelTableEntry .0.0.8.341.1.3.1.4.4.1 |
h245LogChanCloseLogChannelsThe number of attempts made by the outgoing LCSE or B-LCSE to close a logical channel between two peer LCSEs or B-LCSEs. Note - In the case of a bi-directional logical channel, this closes both forward and reverse channels. It is not possible to close one and not the other.ro Counter32 .0.0.8.341.1.3.1.4.4.1.1 |
h245LogChanCloseLogChanAcksThe number of attempts made to confirm the closing of a logical channel connection.ro Counter32 .0.0.8.341.1.3.1.4.4.1.2 |
h245LogChanCloseLogChanRequestsThe number of attempts made by the outgoing CLCSE to request the closing of a logical channel connection between two peer LCSEs.ro Counter32 .0.0.8.341.1.3.1.4.4.1.3 |
h245LogChanCloseLogChanRequestsAcksThe number of attempts made by the incoming CLCSE to indicate that the logical channel connection will be closed.ro Counter32 .0.0.8.341.1.3.1.4.4.1.4 |
h245LogChanCloseLogChanRequestRejectsThe number of attempts made by the incoming CLCSE to indicate that the logical channel connection will not be closed. The only valid cause value for rejecting to close a channel is unspecified.ro Counter32 .0.0.8.341.1.3.1.4.4.1.5 |
h245LogChanCloseLogChanRequestReleasesThe number of attempts made by the outgoing CLCSE in the case of a time out.ro Counter32 .0.0.8.341.1.3.1.4.4.1.6 |
h245Conference OBJECT IDENTIFIER .0.0.8.341.1.3.1.5 |
h245ConferenceTerminalTableThis table contains information about the terminal charachteristics that are related to a conference. It is a list entries. The number of entries equals to the number of conferences. SEQUENCE OF H245ConferenceTerminalTableEntry .0.0.8.341.1.3.1.5.1 |
h245ConferenceTerminalTableEntryIt contains objects that describe a terminal as a conference participant. H245ConferenceTerminalTableEntry .0.0.8.341.1.3.1.5.1.1 |
h245ConferenceConferenceIdThe conference identifier. OCTET STRING .0.0.8.341.1.3.1.5.1.1.1 |
h245ConferenceTerminalLabelThe terminal label of this terminal OCTET STRING .0.0.8.341.1.3.1.5.1.1.2 |
h245ConferenceControlChannelIndexThe index of the control channel table that identifies the control channel for the conference.ro Integer32 .0.0.8.341.1.3.1.5.1.1.3 |
h245ConferenceBroadcasterThe indicator of the terminal being a broadcaster.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.5.1.1.4 |
h245ConferenceConferenceChairThe indicator of the terminal being a conference chair.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.5.1.1.5 |
h245ConferenceMultipointThe indicator of the conference being a multipoint.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.5.1.1.6 |
h245ConferenceStatsTableThis table contains information about conference statistics. It is a list of conference statistics entries. The number of entries equals to the number of conferences on all system interfaces. SEQUENCE OF H245ConferenceStatsTableEntry .0.0.8.341.1.3.1.5.2 |
h245ConferenceStatsTableEntryIt contains objects that describe conference statistics. H245ConferenceStatsTableEntry .0.0.8.341.1.3.1.5.2.1 |
h245ConferenceBroadcastMyLogicalChannelThe number of attempts made by a terminal to transmit MCV command to force an associated MCU to broadcast its video signal used to transmit the picture of a chairman or VIP, alternatively to hold a picture source during the transmission of graphics.ro Counter32 .0.0.8.341.1.3.1.5.2.1.1 |
h245ConferenceCancelBroadcastMyLogicalChannelThe number of attempts made by a terminal to cancel MCV command.ro Counter32 .0.0.8.341.1.3.1.5.2.1.2 |
h245ConferenceSendThisSourceThe number of attempts made by a terminal to send VCS command to MCU to cause transmission to itself of the video from the terminal whose identity number follows VCS.ro Counter32 .0.0.8.341.1.3.1.5.2.1.3 |
h245ConferenceCancelSendThisSourceThe number of attempts made by a terminal to cancel VCS and return to automatic video switching at the MCU.ro Counter32 .0.0.8.341.1.3.1.5.2.1.4 |
h245ConferenceDropConferenceThe number of attempts made by a terminal that is chair-control to drop all terminals from the conference.ro Counter32 .0.0.8.341.1.3.1.5.2.1.5 |
h245ConferenceEqualiseDelayThe same meaning as the command ACE in H.230.ro Counter32 .0.0.8.341.1.3.1.5.2.1.6 |
h245ConferenceZeroDelayThe same meaning as the command ACZ defined in H.230.ro Counter32 .0.0.8.341.1.3.1.5.2.1.7 |
h245ConferenceMultipointModeCommandThe number of attempts made by the MCU to send request to a terminal to comply with all MCU requestMode requests.ro Counter32 .0.0.8.341.1.3.1.5.2.1.8 |
h245ConferenceCancelMultipointModeCommandThe number of attempts made by the MCU to send a cancelation of a MultipointModeCommand.ro Counter32 .0.0.8.341.1.3.1.5.2.1.9 |
h245ConferenceVideoFreezePictureThe number of commands that are sent/received to/from the video decoder to complete updating the current video frame and subsequently display the frozen picture until receipt of the appropriate freeze-picture release control signal.ro Counter32 .0.0.8.341.1.3.1.5.2.1.10 |
h245ConferenceVideoFastUpdatePictureThe number of commands sent/received to enter the fast update mode.ro Counter32 .0.0.8.341.1.3.1.5.2.1.11 |
h245ConferenceVideoFastUpdateGOBThe number of commands sent/received by the video encoder to fast update one or more GOBs.ro Counter32 .0.0.8.341.1.3.1.5.2.1.12 |
h245ConferenceVideoTemporalSpatialTradeOffThe number of commands sent/received by video encoder to change its trade off between temporal and spatial resolution.ro Counter32 .0.0.8.341.1.3.1.5.2.1.13 |
h245ConferenceVideoSendSyncEveryGOBThe number of commands sent/received by video encoder to use sync for every GOB until the cancel command is received.ro Counter32 .0.0.8.341.1.3.1.5.2.1.14 |
h245ConferenceVideoFastUpdateMBThe number of sent/received by video encoder to perform a fast update of one or more MBs.ro Counter32 .0.0.8.341.1.3.1.5.2.1.15 |
h245Misc OBJECT IDENTIFIER .0.0.8.341.1.3.1.6 |
h245MiscRoundTripDelayTableThis table contains information about round trip delay tests. It is a list round trip delay entries. The number of entries equals to the number of tests performed. SEQUENCE OF H245MiscRoundTripDelayTableEntry .0.0.8.341.1.3.1.6.1 |
h245MiscRoundTripDelayTableEntryIt contains information about the round trip delay messages. H245MiscRoundTripDelayTableEntry .0.0.8.341.1.3.1.6.1.1 |
h245MiscRTDStateThe state of the round trip delay. It can be either idle or waiting for response.ro Enumeration .0.0.8.341.1.3.1.6.1.1.1 |
h245MiscT105TimerExpiredRound trip delay timer expired waiting for a respinse from the other entity.ro TruthValue (SNMPv2-TC) .0.0.8.341.1.3.1.6.1.1.2 |
h245MiscLastRTDRequestSentInformation about the last round trip delay request sent.ro Integer32 .0.0.8.341.1.3.1.6.1.1.3 |
h245MiscLastRTDRequestRcvdInformation about the last round trip delay request received.ro Integer32 .0.0.8.341.1.3.1.6.1.1.4 |
h245MiscLastRTDResponseSentInformation about the last round trip delay response sent.ro Integer32 .0.0.8.341.1.3.1.6.1.1.5 |
h245MiscLastRTDResponseRcvdInformation about the last round trip delay response received.ro Integer32 .0.0.8.341.1.3.1.6.1.1.6 |
h245MiscMaintenanceLoopTableThis table contains information about maintenance loop mode. It is a list of maintenance loop entries. The number of entries equals to the number of maintenance loop procedures. SEQUENCE OF H245MiscMaintenanceLoopTableEntry .0.0.8.341.1.3.1.6.2 |
h245MiscMaintenanceLoopTableEntryIt contains entries that describe the maintenance loop procedure. H245MiscMaintenanceLoopTableEntry .0.0.8.341.1.3.1.6.2.1 |
h245MiscMaintenanceLoopDirectionThe direction could be either incoming or outgoing. Enumeration .0.0.8.341.1.3.1.6.2.1.1 |
h245MiscMLStateThe state of the channel which can be: not looped, waiting to be looped or looped.ro Enumeration .0.0.8.341.1.3.1.6.2.1.2 |
h245MiscNumberOfRequestsNumber of loop requests on that channel.ro Counter32 .0.0.8.341.1.3.1.6.2.1.3 |
h245MiscNumberOfAcksNumber of maintenance loop acks on the channel.ro Counter32 .0.0.8.341.1.3.1.6.2.1.4 |
h245MiscLastMLRequestOrAckTypeThe type of the last request or response received. The type can be either media or logical channel loop.ro Enumeration .0.0.8.341.1.3.1.6.2.1.5 |
h245MiscMLMediaOrLogicalChannelLoopRejectChannelNumberIf the loop rejecte is of type media loop or logical channel loop then this represents the channel number for the logical channel.ro Integer32 .0.0.8.341.1.3.1.6.2.1.6 |
h245MiscNumberOfRejectsNumber of loop requests that got rejected.ro Counter32 .0.0.8.341.1.3.1.6.2.1.7 |
h245MiscLastRejectTypeThe type of the last reject for the loop request.ro Enumeration .0.0.8.341.1.3.1.6.2.1.8 |
h245MiscErrorCodeThe error code that caused the rejection of the loop request.ro Enumeration .0.0.8.341.1.3.1.6.2.1.9 |
h245MIBConformance OBJECT IDENTIFIER .0.0.8.341.1.3.1.7 |
h245MIBGroups OBJECT IDENTIFIER .0.0.8.341.1.3.1.7.1 |
h245ConfigurationGroup. Unknown .0.0.8.341.1.3.1.7.1.1 |
h245ControlChannelGroup. Unknown .0.0.8.341.1.3.1.7.1.2 |
h245CapExchangeGroup. Unknown .0.0.8.341.1.3.1.7.1.3 |
h245LogChannelsGroup. Unknown .0.0.8.341.1.3.1.7.1.4 |
h245ConferenceGroup. Unknown .0.0.8.341.1.3.1.7.1.5 |
h245MiscGroup. Unknown .0.0.8.341.1.3.1.7.1.6 |
h245MIBComplianceThe set of objects required for compliance. Unknown .0.0.8.341.1.3.1.7.2 |