GSMP-SERVICE-MIB
This MIB contains managed object definitions for network management services in General Switch Management Protocol (GSMP) Interface.
Main OID:
gsmpServiceMIB.1.3.6.1.2.1.1
111
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
111 total| Object Name |
|---|
gsmpServiceMIBThis MIB contains managed object definitions for network management services in General Switch Management Protocol (GSMP) Interface. MODULE-IDENTITY .1.3.6.1.2.1.1 |
gsmpServiceObjects OBJECT IDENTIFIER .1.3.6.1.2.1.1.1 |
gsmpSwitchConfTableThis table represents the information of switch configuration. SEQUENCE OF GsmpSwitchConfEntry .1.3.6.1.2.1.1.1.1 |
gsmpSwitchConfEntryThe entry of this table is mapped with the each switch partition. GsmpSwitchConfEntry .1.3.6.1.2.1.1.1.1.1 |
gsmpSwitchPartitionIndexThis is unique index for an entry in the gsmpSwitchConfEntry. Integer32 .1.3.6.1.2.1.1.1.1.1.1 |
gsmpSwitchConfMtype1In the request, this object contains the requested QoS configuration type. In the response, this object contains the accepted QoS configuration type. 0 : Indicates use of the default GSMP model 1 : Indicates use of IEEE qGSMP model 2-200 : Reserved 201-255 : Experimentalrw Integer32 .1.3.6.1.2.1.1.1.1.1.2 |
gsmpSwitchConfMtype2If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional MTypero Integer32 .1.3.6.1.2.1.1.1.1.1.3 |
gsmpSwitchConfMtype3If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional Mtypero Integer32 .1.3.6.1.2.1.1.1.1.1.4 |
gsmpSwitchConfMtype4If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional Mtypero Integer32 .1.3.6.1.2.1.1.1.1.1.5 |
gsmpSwitchConfFirmVerThe version number of the switch control firmware installed.ro OCTET STRING .1.3.6.1.2.1.1.1.1.1.6 |
gsmpSwitchConfWindowSizeThe maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss.rw Integer32 .1.3.6.1.2.1.1.1.1.1.7 |
gsmpSwitchConfSwitchTypeA 16-bit value allocated by the manufacturer of the switch. When this value is combined with the OUI from the gsmpSwitchConfSwitchName, the product is uniquely identified.ro OCTET STRING .1.3.6.1.2.1.1.1.1.1.8 |
gsmpSwitchConfSwitchNameThis object is a 48-bit quantity. A 48-bit IEEE 802 MAC address, if available, may be used.ro OCTET STRING .1.3.6.1.2.1.1.1.1.1.9 |
gsmpSwitchConfMaxReservationThe maximum number of reservations that the switch can support. A value of 0 indicates that the switch does not support reservations.ro Integer32 .1.3.6.1.2.1.1.1.1.1.10 |
gsmpInterfaceConfTableThis table represents the configuration information of a single switch port. SEQUENCE OF GsmpInterfaceConfEntry .1.3.6.1.2.1.1.1.2 |
gsmpInterfaceConfEntryAn entry in this table represents the configuration information of a single switch port. GsmpInterfaceConfEntry .1.3.6.1.2.1.1.1.2.1 |
gsmpInterfaceConfIndexThis is a unique index for an entry in the gsmpInterfaceConfTable. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.2.1.1.1.2.1.1 |
gsmpPortTypeThis object represents the port type.ro Enumeration .1.3.6.1.2.1.1.1.2.1.2 |
gsmpPortStatusThis object indicates the port status.rw Enumeration .1.3.6.1.2.1.1.1.2.1.3 |
gsmpLineTypeThis object represents the type of physical transmission interface for this port. PortType = Unknown: other(1) PortType = MPLS: ethernetCsmacd(2), ppp(3) PortType = ATM: atm(4) PortType = FR: frameRelayService(5)ro Enumeration .1.3.6.1.2.1.1.1.2.1.4 |
gsmpFunctionTypeIt specifies the action to be taken by the switch. The specified action will be taken regardless of the current status of the port.rw Enumeration .1.3.6.1.2.1.1.1.2.1.5 |
gsmpLineStatusIt defines the status of the physical transmission medium connected to the port. The defined values of the Line Status field are: up(1): The line is able to both send and receive. When the line status changes to Up from either the down or test states, a new port session number MUST be generated. down(2): The line is unable either to send or receive or both. Test(3): The port or line is in a test mode, for example, power-on test.rw Enumeration .1.3.6.1.2.1.1.1.2.1.6 |
gsmpPriortiesThis object represents the number of different priority levels that this output port can assign to connections. Zero is invalid in this field.rw Integer32 .1.3.6.1.2.1.1.1.2.1.7 |
gsmpPhysicalSlotNumberThe physical location of the slot in which the port is located.ro Integer32 .1.3.6.1.2.1.1.1.2.1.8 |
gsmpPhysicalPortNumberThe physical location of the port within the slot in which the port is located. The Physical Port Number is not used by the GSMP protocol. It is provided to assist network management in functions such as logging, port naming, and graphical representation.ro Integer32 .1.3.6.1.2.1.1.1.2.1.9 |
gsmpMinLabelThe minimum label value in the range.rw Label .1.3.6.1.2.1.1.1.2.1.10 |
gsmpMaxLabelThe maximum label value in the range.rw Label .1.3.6.1.2.1.1.1.2.1.11 |
gsmpRemainingLabelsThe maximum number of remaining labels that could be requested for allocation on the specified port.ro Unsigned32 .1.3.6.1.2.1.1.1.2.1.12 |
gsmpConnectionReplaceIt indicates that a switch controller requests the switch port to support the mechanism of connection replacement.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.1.1.2.1.13 |
gsmpDurationIt is the length of time in seconds, that any of the loopback states remain in operation.rw Integer32 UNITS "second" .1.3.6.1.2.1.1.1.2.1.14 |
gsmpEventSequenceNumberThis object represents the current value of the event sequence number of the switch port. This number is set to zero when the port is initialed.ro Integer32 .1.3.6.1.2.1.1.1.2.1.15 |
gsmpEventFlagsIt is used to reset the event flags.rw Bits .1.3.6.1.2.1.1.1.2.1.16 |
gsmpFlowControlFlagsIt is used to indicate whether the flow control mechanism is turned on or not.rw Bits .1.3.6.1.2.1.1.1.2.1.17 |
gsmpTransmitDataRateIt is used to set the output data rate of the output port. cells/s for PortType = ATM bytes/s for PortType = FR bytes/s for PortType = MPLSrw Unsigned32 .1.3.6.1.2.1.1.1.2.1.18 |
gsmpReceiveDataRateThe maximum rate of data that may arrive at the input port. cells/s for PortType = ATM bytes/s for PortType = FR bytes/s for PortType = MPLSrw Unsigned32 .1.3.6.1.2.1.1.1.2.1.19 |
gsmpServiceTableThis table represents the list of services and their associated parameters, which are supported by the switch. SEQUENCE OF GsmpServiceEntry .1.3.6.1.2.1.1.1.3 |
gsmpServiceEntryThe entry of this table represents the list of services and their associated parameters, which are supported by the switch. GsmpServiceEntry .1.3.6.1.2.1.1.1.3.1 |
gsmpServiceIdThis object represents the identifier of the service supported by the switch. Integer32 .1.3.6.1.2.1.1.1.3.1.1 |
gsmpCapSetIdA capability set contains a set of parameters that describe the QoS parameter values and traffic controls that apply to an instance of the service. Integer32 .1.3.6.1.2.1.1.1.3.1.2 |
gsmpTrafficControlsIdentifies the availability of traffic controls within the capability set. U: Usage Parameter Control D: Packet Discard I: Ingress Shaping E: Egress Shaping, Peak Rate S: Egress Traffic Shaping, Sustainable Rate V: VC Mergero Bits .1.3.6.1.2.1.1.1.3.1.3 |
gsmpCellLossRatioIt indicates the cell loss ratio parameter guaranteed by the switch for the specified service.ro Integer32 .1.3.6.1.2.1.1.1.3.1.4 |
gsmpCellTransferDelayThe value of this object is expressed in units of microseconds.ro Unsigned32 UNITS "micro-second" .1.3.6.1.2.1.1.1.3.1.5 |
gsmpCellDelayVariationIt represents the peak-to-peak cell delay variation. The CDV value is expressed in units of microseconds.ro Unsigned32 UNITS "micro-second" .1.3.6.1.2.1.1.1.3.1.6 |
gsmpFrequencyFrequency applies to the MPLS CR-LDP service. Valid values of this object are: 0 - Very frequent 1 - Frequent 2 - Unspecifiedro Unsigned32 .1.3.6.1.2.1.1.1.3.1.7 |
gsmpPortServiceMapTableThis table represents the service lists, which are supported by the specific port. SEQUENCE OF GsmpPortServiceMapEntry .1.3.6.1.2.1.1.1.4 |
gsmpPortServiceMapEntryThe entry of this table represents the service lists, which are supported by the specific port. GsmpPortServiceMapEntry .1.3.6.1.2.1.1.1.4.1 |
gsmpMapServiceIdThis object represents the identifier of the service supported by the switch.ro Integer32 .1.3.6.1.2.1.1.1.4.1.1 |
gsmpMapCapSetIdA capability set contains a set of parameters that describe the QoS parameter values and traffic controls that apply to an instance of the Service.ro Integer32 .1.3.6.1.2.1.1.1.4.1.2 |
gsmpTrafficParamIndexNextThis object contains an appropriate value which will be used for gsmpTrafficParamIndex.ro Unsigned32 .1.3.6.1.2.1.1.1.5 |
gsmpTrafficParamTableThis table contains objects, which specify the traffic parameters of in-segments and out-segments. SEQUENCE OF GsmpTrafficParamEntry .1.3.6.1.2.1.1.1.6 |
gsmpTrafficParamEntryAn entry in this table represents the gsmpTrafficParam objects for one or more in or out segments. GsmpTrafficParamEntry .1.3.6.1.2.1.1.1.6.1 |
gsmpTrafficParamIndexUniquely identifies this row of this table. Note that zero represents an invalid index. Unsigned32 .1.3.6.1.2.1.1.1.6.1.1 |
gsmpTrafficParamMaxRateMaximum rate in kilobits/second.rw Integer32 .1.3.6.1.2.1.1.1.6.1.2 |
gsmpTrafficParamMeanRateMean rate in kilobits/second.rw Integer32 .1.3.6.1.2.1.1.1.6.1.3 |
gsmpTrafficParamMaxBurstSizeMaximum burst size in bytes.rw Unsigned32 .1.3.6.1.2.1.1.1.6.1.4 |
gsmpTrafficControlsFlagsThis object is used to indicate that specific traffic controls are requested for the requested connection. 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ |U|D|I|E|S|V|P|x| +-+-+-+-+-+-+-+-+ U: Usage Parameter Control D: Packet Discard I: Ingress Shaping E: Egress Shaping, Peak Rate S: Egress Traffic Shaping, Sustainable Rate V: VC Merge P: Port x: Reservedrw Bits .1.3.6.1.2.1.1.1.6.1.5 |
gsmpTrafficParamRowStatusFor creating, modifying, and deleting this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.1.1.6.1.6 |
gsmpTrafficParamStorageTypeDefines the storage type support provided for this object by the agent.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.1.1.6.1.7 |
gsmpInSegmentTableThis table contains a description of the incoming GSMP segments and their associated parameters. SEQUENCE OF GsmpInSegmentEntry .1.3.6.1.2.1.1.1.7 |
gsmpInSegmentEntryAn entry in this table represents one incoming GSMP segment. GsmpInSegmentEntry .1.3.6.1.2.1.1.1.7.1 |
gsmpInSegmentIfIndexThis is a unique index for an entry in the gsmpInSegmentTable. This value represents the interface index for the incoming GSMP interface. A value of zero represents an incoming label from the per-platform label space. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.2.1.1.1.7.1.1 |
gsmpInSegmentLabelThe incoming label for this segment. Label .1.3.6.1.2.1.1.1.7.1.2 |
gsmpInSegmentXCIndexIndex into gsmpXCTable which identifies which cross-connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of gsmpXCIndex of that cross-connect entry.ro Unsigned32 .1.3.6.1.2.1.1.1.7.1.3 |
gsmpInSegmentOwnerThis object denotes the entity that created and is responsible for managing this segment.ro Owner .1.3.6.1.2.1.1.1.7.1.4 |
gsmpInSegmentTrafficParamPtrThis variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the gsmpTrafficParamTable to indicate which gsmpTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table.rw RowPointer (SNMPv2-TC) .1.3.6.1.2.1.1.1.7.1.5 |
gsmpInQoSModelSelectorsimplePriorityModel(1): The input service selector indicates a simple priority. serviceProfileModel(2): The input service selector is an opaque service profile identifier. Service profiles can be used to indicate pre- defined differentiated service per hop behaviors. serviceModel(3): The input service selector corresponds to a service specification. When the value of this object is serviceModel(3), then a traffic parameters block is appended to this entry. armModel(4): The input service selector corresponds to an ARM service specification. ARM model is defined in qGSMP specification.rw Enumeration .1.3.6.1.2.1.1.1.7.1.6 |
gsmpInServiceSelectorThis object identifies details of the service specification being used for connection. The interpretation depends upon the gsmpInQoSModelSelector object.rw Integer32 .1.3.6.1.2.1.1.1.7.1.7 |
gsmpInAdaptationMethodTypeThe adaptation method is used to define the adaptation framing that may be in use when moving traffic from one port type to another port type; e.g., from a frame relay port to an ATM port.rw Enumeration .1.3.6.1.2.1.1.1.7.1.8 |
gsmpInSegmentRowStatusThis variable is used to create, modify, and/or delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.1.1.7.1.9 |
gsmpInSegmentStorageTypeThis variable indicates the storage type for this object.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.1.1.7.1.10 |
gsmpOutSegmentTableThis table contains a description of the outgoing GSMP segments to a connection and their associated parameters. SEQUENCE OF GsmpOutSegmentEntry .1.3.6.1.2.1.1.1.8 |
gsmpOutSegmentEntryAn entry in this table represents one outgoing GSMP segment. GsmpOutSegmentEntry .1.3.6.1.2.1.1.1.8.1 |
gsmpOutSegmentIfIndexThis is a unique index for an entry in the gsnmpOutSegmentTable. This value represents the interface index for the outgoing GSMP interface. A value of zero represents an outgoing label from the per-platform label space.rw InterfaceIndex (IF-MIB) .1.3.6.1.2.1.1.1.8.1.1 |
gsmpOutSegmentLabelThe outgoing label for this segment.rw Label .1.3.6.1.2.1.1.1.8.1.2 |
gsmpOutSegmentXCIndexIndex into gsmpXCTable which identifies which cross-connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of gsmpXCIndex of that cross-connect entry.ro Unsigned32 .1.3.6.1.2.1.1.1.8.1.3 |
gsmpOutSegmentOwnerThis object denotes the entity that created and is responsible for managing this segment.ro Owner .1.3.6.1.2.1.1.1.8.1.4 |
gsmpOutSegmentTrafficParamPtrThis variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the gsmpTrafficParamTable to indicate which gsmpTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table.rw RowPointer (SNMPv2-TC) .1.3.6.1.2.1.1.1.8.1.5 |
gsmpOutQoSModelSelectorsimplePriorityModel(1): The output service selector indicates a simple priority. serviceProfileModel(2): The output service selector is an opaque service profile identifier. Service profiles can be used to indicate pre- defined differentiated service per hop behaviors. serviceModel(3): The output service selector corresponds to a service specification. When the value of this object is serviceModel(3), then a traffic parameters block is appended to this entry. armModel(4): The output service selector corresponds to an ARM service specification. ARM model is defined in qGSMP specification.rw Enumeration .1.3.6.1.2.1.1.1.8.1.6 |
gsmpOutAdaptationMethodTypeThe adaptation method is used to define the adaptation framing that may be in use when moving traffic from one port type to another port type; e.g., from a frame relay port to an ATM port.rw Enumeration .1.3.6.1.2.1.1.1.8.1.8 |
gsmpOutSegmentRowStatusThis variable is used to create, modify, and/or delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.1.1.8.1.9 |
gsmpOutSegmentStorageTypeThis variable indicates the storage type for this object.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.1.1.8.1.10 |
gsmpXCIndexNextThis object contains an appropriate value to be used for gsmpXCIndex when creating entries in the gsmpXCTable.ro Unsigned32 .1.3.6.1.2.1.1.1.9 |
gsmpXCTableA connection is modeled as a cross-connect consisting of one or more incoming segments(in-segments) and/or one or more outgoing segments(out-segments) at a switch. The association or interconnection of the in-segments and out-segments is accomplished by using the gsmpXCTable. SEQUENCE OF GsmpXCEntry .1.3.6.1.2.1.1.1.10 |
gsmpXCEntryA row in this table represents one cross-connect entry. GsmpXCEntry .1.3.6.1.2.1.1.1.10.1 |
gsmpXCIndexPrimary index for the conceptual row identifying cross-connect segments. Unsigned32 .1.3.6.1.2.1.1.1.10.1.1 |
gsmpXCInSegmentIfIndexInterface index of the in-segment. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.2.1.1.1.10.1.2 |
gsmpXCInSegmentLabelIncoming label. Label .1.3.6.1.2.1.1.1.10.1.3 |
gsmpXCOutSegmentIfIndexInterface index of the out-segment. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.2.1.1.1.10.1.4 |
gsmpXCOutSegmentLabelOutgoing label. Label .1.3.6.1.2.1.1.1.10.1.5 |
gsmpXCIsPersistentThis object denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.1.1.10.1.6 |
gsmpXCOwnerIt denotes the entity that created and is responsible for managing this cross-connect.ro Owner .1.3.6.1.2.1.1.1.10.1.7 |
gsmpXCAdminStatusThe desired operational status of this segment. up(1) = ready to pass packets testing(3) = in some test moderw Enumeration .1.3.6.1.2.1.1.1.10.1.8 |
gsmpXCOperStatusThe actual operational status of this cross-connect. up(1) = ready to pass packets testing(3) = in some test mode unknown(4) = status cannot be determined for some reason notPresent(6) = some component is missing lowerLayerDown(7) = down due to the state of lower layer interfacesro Enumeration .1.3.6.1.2.1.1.1.10.1.9 |
gsmpConnectTypeThis object is used to define connection types.rw Enumeration .1.3.6.1.2.1.1.1.10.1.10 |
gsmpBiDirectionIf this flag is true, then the connection should be established to be bi-direction.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.1.1.10.1.11 |
gsmpXCRowStatusThis variable is used to create, modify, and/or delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.1.1.10.1.12 |
gsmpXCStorageTypeThis variable indicates the storage type for this object.ro StorageType (SNMPv2-TC) .1.3.6.1.2.1.1.1.10.1.13 |
gsmpInterfacePerfTableThis table contains objects to measure the performance of GSMP interfaces and is an AUGMENT to gsmpInterfaceConfTable. SEQUENCE OF GsmpInterfacePerfEntry .1.3.6.1.2.1.1.1.11 |
gsmpInterfacePerfEntryThe Entry of this table contains objects to measure the performance of GSMP interfaces and is an AUGMENT to gsmpInterfaceConfTable. GsmpInterfacePerfEntry .1.3.6.1.2.1.1.1.11.1 |
gsmpInterfaceInFrameCountThis object counts frames arriving at the input. It is relevant for label types = FR and MPLS.ro Counter64 .1.3.6.1.2.1.1.1.11.1.1 |
gsmpInterfaceInInvalidLabelCountThis object counts frames discarded because their Label is invalid on arrival at an input port.ro Counter64 .1.3.6.1.2.1.1.1.11.1.2 |
gsmpInterfaceInFrameDiscardCountThis object counts frames discarded due to congestion on an input port. It is relevant for label types = FR and MPLS.ro Counter64 .1.3.6.1.2.1.1.1.11.1.3 |
gsmpInterfaceOutFrameCountThis object counts frames arriving at the output. It is relevant for label types = FR and MPLS.ro Counter64 .1.3.6.1.2.1.1.1.11.1.4 |
gsmpInterfaceOutFrameDiscardCountThis object counts frames discarded due to congestion on an output port. It is relevant for label types = FR and MPLS.ro Counter64 .1.3.6.1.2.1.1.1.11.1.5 |
gsmpLabelPerfTableThis table has objects to measure the performance of connection. SEQUENCE OF GsmpLabelPerfEntry .1.3.6.1.2.1.1.1.12 |
gsmpLabelPerfEntryThe Entry of this table contains objects to measure the performance of GSMP label. GsmpLabelPerfEntry .1.3.6.1.2.1.1.1.12.1 |
gsmpLabelIndexThis is a unique index for an entry in the gsmpLabelPerfTable. Label .1.3.6.1.2.1.1.1.12.1.1 |
gsmpLabelInFrameCountThis object counts frames arriving at the in-segment. It is relevant for label types = FR and MPLS.ro Counter64 .1.3.6.1.2.1.1.1.12.1.2 |
gsmpLabelInFrameDiscardCountThis object counts frames discarded due to congestion on the in-segment. It is relevant for label types = FR and MPLS.ro Counter64 .1.3.6.1.2.1.1.1.12.1.3 |
gsmpLabelOutFrameCountThis object counts frames departing from the out-segment. It is relevant for label types = FR and MPLS.ro Counter64 .1.3.6.1.2.1.1.1.12.1.4 |
gsmpLabelOutFrameDiscardCountThis object counts frames discarded due to congestion on the out-segment. It is relevant for label types = FR and MPLS.ro Counter64 .1.3.6.1.2.1.1.1.12.1.5 |