GSM7224-RADIUS-MIB
The GSM7224-RADIUS-MIB facilitates the monitoring and management of RADIUS authentication, authorization, and accounting (AAA) sessions on D-Link GSM7224 series managed switches. It exposes specific metrics including active session counts, authentication failure rates, and accounting record statistics to verify network access control integrity.
Imported Objects
Objects
25 total| Object Name |
|---|
gsm7224RadiusThe GSM7224 Radius MIB MODULE-IDENTITY .1.3.6.1.4.1.4526.1.8.8 |
agentRadiusConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.1.8.8.1 |
agentRadiusMaxTransmitMaximum number of retransmissions of a RADIUS request packetrw Unsigned32 .1.3.6.1.4.1.4526.1.8.8.1.1 |
agentRadiusTimeoutTime out duration (in seconds) before packets are retransmittedrw Unsigned32 .1.3.6.1.4.1.4526.1.8.8.1.2 |
agentRadiusAccountingModeIdentifies if RADIUS Accounting has been enabled or notrw Enumeration .1.3.6.1.4.1.4526.1.8.8.1.3 |
agentRadiusStatsClearWhen set to enable(1), all Radius statistics will be reset.rw Enumeration .1.3.6.1.4.1.4526.1.8.8.1.4 |
agentRadiusAccountingIndexNextValidIndicates the next valid index into the agentRadiusAccountingConfigTable
for creation. If no additional entries are allowed, this will be 0.ro Integer32 .1.3.6.1.4.1.4526.1.8.8.1.5 |
agentRadiusAccountingConfigTableTable with information about Radius Accounting Server IP
Addresses, port numbers and shared secret. Only one entry is
supported at this time. SEQUENCE OF AgentRadiusAccountingConfigEntry .1.3.6.1.4.1.4526.1.8.8.1.6 |
agentRadiusAccountingConfigEntryEntry consisting of configuration data for a Radius Accounting Server. AgentRadiusAccountingConfigEntry .1.3.6.1.4.1.4526.1.8.8.1.6.1 |
agentRadiusAccountingServerIndexUnique index of the configured RADIUS accounting server Integer32 .1.3.6.1.4.1.4526.1.8.8.1.6.1.1 |
agentRadiusAccountingServerAddressIP Address of the configured RADIUS accounting server.
This object cannot be changed after creation.rw IpAddress .1.3.6.1.4.1.4526.1.8.8.1.6.1.2 |
agentRadiusAccountingPortPort number for the RADIUS accounting server.
This object cannot be configured on row creation.rw Unsigned32 .1.3.6.1.4.1.4526.1.8.8.1.6.1.3 |
agentRadiusAccountingSecretConfigured shared sercret for the RADIUS accounting server.
This object cannot be configured on row creation.rw DisplayString .1.3.6.1.4.1.4526.1.8.8.1.6.1.4 |
agentRadiusAccountingStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.1.8.8.1.6.1.5 |
agentRadiusServerIndexNextValidIndicates the next valid index into the agentRadiusServerConfigTable
for creation. If no additional entries are allowed, this will be 0.ro Integer32 .1.3.6.1.4.1.4526.1.8.8.1.7 |
agentRadiusServerConfigTableTable with information about Radius Accounting Server IP
Addresses, port numbers and shared secret SEQUENCE OF AgentRadiusServerConfigEntry .1.3.6.1.4.1.4526.1.8.8.1.8 |
agentRadiusServerConfigEntryEntry consisting of configuration data for a Radius Server.
Creation requires setting AgentRadiusServerConfigEntry .1.3.6.1.4.1.4526.1.8.8.1.8.1 |
agentRadiusServerIndexUnique index of the configured RADIUS server Integer32 .1.3.6.1.4.1.4526.1.8.8.1.8.1.1 |
agentRadiusServerAddressIP Address of the configured RADIUS server.
This object cannot be changed after creation.rw IpAddress .1.3.6.1.4.1.4526.1.8.8.1.8.1.2 |
agentRadiusServerPortPort number for the RADIUS server.
This object cannot be configured on row creation.rw Unsigned32 .1.3.6.1.4.1.4526.1.8.8.1.8.1.3 |
agentRadiusServerSecretConfigured shared sercret for the RADIUS server.
This object cannot be configured on row creation.rw DisplayString .1.3.6.1.4.1.4526.1.8.8.1.8.1.4 |
agentRadiusServerPrimaryModeConfigure the RADIUS server to be the primary server. If there is any
other server that is configured to be primary, that server is set to be
a seconday server and this entry is set Primary.
This object cannot be configured on row creation.rw Enumeration .1.3.6.1.4.1.4526.1.8.8.1.8.1.5 |
agentRadiusServerCurrentModeIndicate if the RADIUS server is the current server in user for
authentication.ro Enumeration .1.3.6.1.4.1.4526.1.8.8.1.8.1.6 |
agentRadiusServerMsgAuthEnable or disable the message authenticator attribute for this
RADIUS server.
This object cannot be configured on row creation.rw Enumeration .1.3.6.1.4.1.4526.1.8.8.1.8.1.7 |
agentRadiusServerStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.1.8.8.1.8.1.8 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.