GSM7224-MGMT-SECURITY-MIB
Standard SNMP MIB module defining data structures for GSM7224-MGMT-SECURITY-MIB.
Imported Objects
Objects
9 total| Object Name |
|---|
gsm7224MgmtSecurity MODULE-IDENTITY .1.3.6.1.4.1.4526.1.8.11 |
agentSSLConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.1.8.11.1 |
agentSSLAdminModeConfigures whether the SSL service is enabled on this switch. The
default value is disable(2).rw Enumeration .1.3.6.1.4.1.4526.1.8.11.1.1 |
agentSSLSecurePortConfigures the port the SSL service will respond on. The default
value is 443.rw Integer32 .1.3.6.1.4.1.4526.1.8.11.1.2 |
agentSSLProtocolLevelConfigures which protocol versions of SSL are enabled on this
switch. The default value is both(3).rw Enumeration .1.3.6.1.4.1.4526.1.8.11.1.3 |
agentSSHConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.1.8.11.2 |
agentSSHAdminModeConfigures whether the SSH service is enabled on this switch. The
default value is disable(2).rw Enumeration .1.3.6.1.4.1.4526.1.8.11.2.1 |
agentSSHProtocolLevelConfigures which protocol versions of SSH are enabled on this
switch. The default value is both(3).rw Enumeration .1.3.6.1.4.1.4526.1.8.11.2.2 |
agentSSHSessionsCountCurrent number of active SSH sessions on this switch.ro Integer32 .1.3.6.1.4.1.4526.1.8.11.2.3 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.