FSM7326-POWER-ETHERNET-MIB
Imported Objects
Objects
8 total| Object Name |
|---|
fsm7326powerEthernetMIBThis MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet Interfaces and Hub MIB Working Group for managing Power Source Equipment (PSE). The objects in this MIB are intended to provide additional objects for reporting information available to the hardware on this platform which are not represented in the draft MIB. MODULE-IDENTITY .1.3.6.1.4.1.4526.1.9.15 |
agentPethObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4526.1.9.15.1 |
agentPethPsePortTableA table of per-port information and configuration objects relating to the power status of each port. SEQUENCE OF AgentPethPsePortEntry .1.3.6.1.4.1.4526.1.9.15.1.1 |
agentPethPsePortEntryA collection of objects providing additional power information and control parameters for the specified port. AgentPethPsePortEntry .1.3.6.1.4.1.4526.1.9.15.1.1.1 |
agentPethPowerLimitThe configured maximum power this port can provide to an attached device measured in Watts.rw Gauge32 .1.3.6.1.4.1.4526.1.9.15.1.1.1.1 |
agentPethOutputPowerThe power this port is supplying to an attached device measured in Milliwatts.ro Gauge32 UNITS "Milliwatts" .1.3.6.1.4.1.4526.1.9.15.1.1.1.2 |
agentPethOutputCurrentThe current this port is supplying to an attached device measured in Milliamps.ro Gauge32 UNITS "Milliamps" .1.3.6.1.4.1.4526.1.9.15.1.1.1.3 |
agentPethOutputVoltsThe voltage this port is supplying to an attached device measured in Volts.ro Gauge32 UNITS "Volts" .1.3.6.1.4.1.4526.1.9.15.1.1.1.4 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.