FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
75
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
snIpxGen OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 |
snIpxClearCacheclear(1) will clear cache table.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3 |
snIpxClearRouteclear(1) will clear ipx route table.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4 |
snIpxClearTrafficCntsclear(1) will clear ipx all traffic counters.
- snIpxRcvPktsCnt, snIpxFwdPktsCnt,
snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt,
snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5 |
snIpxRcvPktsCntIPX incoming packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6 |
snIpxFwdPktsCntIPX forwarding packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8 |
snIpxRcvFiltPktsCntIPX receiving filter packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10 |
snIpxCache OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2 |
snIpxCacheTableIPX Cache table. SEQUENCE OF SnIpxCacheEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1 |
snIpxCacheEntryAn entry in the IPX Cache table. SnIpxCacheEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1 |
snIpxCacheIndexThe table index for a IPX Cache entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1 |
snIpxCacheNetNumCache Network number is represented by ASCII mainly for HP OpenView.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2 |
snIpxCacheNodeCache Node Number.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3 |
snIpxCacheOutFilterCache Outbound Filter is ether disabled(0) or enabled(1).ro RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4 |
snIpxCacheEncapThe IPX encapsulation frame type.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5 |
snIpxCachePortIPX Router Port number.ro PortIndex .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6 |
snIpxRoute OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3 |
snIpxRouteTableIPX route table. SEQUENCE OF SnIpxRouteEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1 |
snIpxRouteEntryAn entry in the IPX route table. SnIpxRouteEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1 |
snIpxRouteIndexThe table index for a IPX route entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1 |
snIpxDestNetNumDestination Network number is represented by ASCII mainly for HP OpenView.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2 |
snIpxFwdRouterNodeForward Router Node Number.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3 |
snIpxDestHopCntsNumber of hops to reach the
destination.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4 |
snIpxRouteMetricThe metrics to next hop router.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5 |
snIpxDestPortThe destination port.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6 |
snIpxFwdFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5 |
snIpxFwdFilterTableIPX Forward Filter table. SEQUENCE OF SnIpxFwdFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1 |
snIpxFwdFilterEntryAn entry in the IPX Forward Filter table. SnIpxFwdFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1 |
snIpxFwdFilterIdThe filter ID for a filter entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1 |
snIpxFwdFilterActionAction to take if the ipx packet match
with this filter.rw Action .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2 |
snIpxFwdFilterSocketIPX Forward Filter Socket Number.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3 |
snIpxFwdFilterSrcNetSource Network Number.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4 |
snIpxFwdFilterSrcNodeSource Node Number.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5 |
snIpxFwdFilterDestNetDestination Network Number.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6 |
snIpxFwdFilterDestNodeDestination Node Number.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7 |
snIpxFwdFilterRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 |
snIpxPortCounters OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12 |
snIpxPortCountersTableIPX port Counters table. SEQUENCE OF SnIpxPortCountersEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1 |
snIpxPortCountersEntryAn entry in the IPX Port Counters table. SnIpxPortCountersEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1 |
snIpxPortCountersPortThe port index for port Counters entry.ro PortIndex .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1 |
snIpxPortCountersRcvPktsCntIPX incoming packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2 |
snIpxPortCountersFwdPktsCntIPX forwarding packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4 |
snIpxPortCountersRcvFiltPktsCntIPX receiving filter packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7 |
snRtIpGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.11.2.3.7.11.12.2.2.1 |
snRtClearArpCacheclear(1) will clear arp cache table.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.1 |
snRtClearIpCacheclear(1) will clear ip route cache table.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.2 |
snRtIpFilterTableIP filter table. SEQUENCE OF SnRtIpFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3 |
snRtIpFilterEntryAn entry in the IP filter table. SnRtIpFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1 |
snRtIpFilterIndexThe table index for a filter entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.1 |
snRtIpFilterActionAction to take if the ip packet match
with this filter.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.2 |
snRtIpFilterProtocolTransport protocol. 0 means don't carerw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.3 |
snRtIpFilterSourceIpSource IP address.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.4 |
snRtIpFilterSourceMaskSource IP subnet mask.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.5 |
snRtIpFilterDestIpDestination IP address.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.6 |
snRtIpFilterDestMaskDestination IP subnet mask.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.7 |
snRtIpFilterOperatorType of comparison to perform.
for now, this only applys to tcp or udp
to compare the port numberrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.8 |
snRtIpFilterOperandFor now this only refers to transport
protocol port number. 0 means NArw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.9 |
snRtIpFilterRowStatusTo create or delete a filter
entry.rw RowSts .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.10 |
snRtIpFilterEstablishedEnable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol.rw RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.11 |
snRtIpFilterQosPriorityThe router L4 Qos Priority values are:
low(0)
high(1)
The Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.12 |
snRtIpTraceRoute OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10 |
snRtIpTraceRouteGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1 |
snRtIpTraceRouteTargetAddrTarget IP address of which trace route is performed.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.1 |
snRtIpTraceRouteMinTtlMinimum TTL value carried in the first probe packet.
Value 0 cannot be used for SET operations. This value
is returned if traceroute is not running within the system.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.2 |
snRtIpTraceRouteMaxTtlMaximum TTL value carried in the last probe packet.
Value 0 cannot be used for SET operations. This value
is returned if traceroute is not running within the system.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.3 |
snRtIpTraceRouteTimeOutTime out period (in seconds) to wait for the response
from the probe packet (i,e, the ICMP packet).
Value 0 cannot be used for SET operations. This value
is returned if traceroute is not running within the system.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.4 |
snRtIpTraceRouteControlOnly 'start' and 'abort' are writable values; 'success',
'failure' and 'inProgress' are readeable (or returned)
values.
Writing 'start' to this object to initiate the trace route
operation. snRtIpTraceRouteDestAddr must have been init-
ialized before 'start' is writen.
This object will return 'inProgress' after trace route
operation has started. During the 'inProgress' state,
writing 'abort' to this object will stop the current
trace route operation.
If the destination address is reached, this object
returned 'success'. snRtIpTraceRouteResultTable
contains the routes (and the target address) to
reach the destination address. If the destination
address does not reach, timeout, or ending TTL
reached, 'failure' is returned.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.5 |
snRtIpTraceRouteResult OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2 |
snRtIpTraceRouteResultTableTrace route result table. SEQUENCE OF SnRtIpTraceRouteResultEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1 |
snRtIpTraceRouteResultEntryAn entry of the trace route result table. SnRtIpTraceRouteResultEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1 |
snRtIpTraceRouteResultIndexThe table index for a trace route result entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.1 |
snRtIpTraceRouteResultAddrThe router or the target address of which forms
part of the route to reach the destination address.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.2 |
snRtIpTraceRouteResultRoundTripTime1The round trip time between the first probe packet
transmitted and the reponse ICMP packet received.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.3 |
snRtIpTraceRouteResultRoundTripTime2The round trip time between the second probe packet
transmitted and the reponse ICMP packet received.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.4 |