FOUNDRY-SN-IPX-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
113
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
snIpxGen OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 |
snIpxRoutingModeEnabled/Disabled System IPX Routing Mode status.rw RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1 |
snIpxNetBiosFilterModeEnabled/Disabled NetBios Filter Mode status.rw RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2 |
snIpxClearCacheclear(1) will clear cache table.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3 |
snIpxClearRouteclear(1) will clear ipx route table.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4 |
snIpxClearTrafficCntsclear(1) will clear ipx all traffic counters.
- snIpxRcvPktsCnt, snIpxFwdPktsCnt,
snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt,
snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5 |
snIpxRcvPktsCntIPX incoming packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6 |
snIpxTxPktsCntIPX Outgoing packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7 |
snIpxFwdPktsCntIPX forwarding packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8 |
snIpxRcvDropPktsCntIPX receiving drop packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9 |
snIpxRcvFiltPktsCntIPX receiving filter packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10 |
snIpxRipGblFiltListAn IPX RIP Global Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11 |
snIpxRipFiltOnAllPortApply the IPX RIP Global filter list snIpxRipGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all RIP filter lists to/from all ports.
Prior to sending this command, snIpxRipGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 |
snIpxSapGblFiltListAn IPX SAP Global Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13 |
snIpxSapFiltOnAllPortApply the IPX SAP Global filter list snIpxSapGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all SAP filter lists to/from all ports.
Prior to sending this command, snIpxSapGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14 |
snIpxTxDropPktsCntIPX transmitting drop packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15 |
snIpxTxFiltPktsCntIPX transmitting filter packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16 |
snIpxCache OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2 |
snIpxCacheTableIPX Cache table. SEQUENCE OF SnIpxCacheEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1 |
snIpxCacheEntryAn entry in the IPX Cache table. SnIpxCacheEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1 |
snIpxCacheIndexThe table index for a IPX Cache entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1 |
snIpxCacheNetNumCache Network number.ro NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2 |
snIpxCacheNodeCache Node Number.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3 |
snIpxCacheOutFilterCache Outbound Filter is ether disabled(0) or enabled(1).ro RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4 |
snIpxCacheEncapThe IPX encapsulation frame type.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5 |
snIpxCachePortIPX Router Port number.ro PortIndex .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6 |
snIpxRoute OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3 |
snIpxRouteTableIPX route table. SEQUENCE OF SnIpxRouteEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1 |
snIpxRouteEntryAn entry in the IPX route table. SnIpxRouteEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1 |
snIpxRouteIndexThe table index for a IPX route entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1 |
snIpxDestNetNumDestination Network number.ro NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2 |
snIpxFwdRouterNodeForward Router Node Number.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3 |
snIpxDestHopCntsNumber of hops to reach the
destination.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4 |
snIpxRouteMetricThe metrics to next hop router.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5 |
snIpxDestPortThe destination port.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6 |
snIpxServer OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4 |
snIpxServerTableIPX Server table. SEQUENCE OF SnIpxServerEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1 |
snIpxServerEntryAn entry in the IPX Server table. SnIpxServerEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1 |
snIpxServerIndexThe table index for a IPX Server entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1 |
snIpxServerTypeIPX Server Type.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2 |
snIpxServerNetNumServer Network number.ro NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3 |
snIpxServerNodeServer Node Number.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4 |
snIpxServerSocketServer Socket Number.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5 |
snIpxServerHopCntsNumber of intervening networks to reach the
server.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6 |
snIpxServerNameIPX Server Name.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7 |
snIpxFwdFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5 |
snIpxFwdFilterTableIPX Forward Filter table. SEQUENCE OF SnIpxFwdFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1 |
snIpxFwdFilterEntryAn entry in the IPX Forward Filter table. SnIpxFwdFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1 |
snIpxFwdFilterIdThe filter ID for a filter entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1 |
snIpxFwdFilterActionAction to take if the ipx packet match
with this filter.rw Action .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2 |
snIpxFwdFilterSocketIPX Forward Filter Socket Number.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3 |
snIpxFwdFilterSrcNetSource Network Number.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4 |
snIpxFwdFilterSrcNodeSource Node Number.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5 |
snIpxFwdFilterDestNetDestination Network Number.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6 |
snIpxFwdFilterDestNodeDestination Node Number.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7 |
snIpxFwdFilterRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 |
snIpxRipFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6 |
snIpxRipFilterTableIPX RIP Filter table. SEQUENCE OF SnIpxRipFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1 |
snIpxRipFilterEntryAn entry in the IPX RIP Filter table. SnIpxRipFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1 |
snIpxRipFilterIdThe filter ID for a filter entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1 |
snIpxRipFilterActionAction to take if the ipx packet match
with this filter.rw Action .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2 |
snIpxRipFilterNetIPX RIP Filter Network number.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3 |
snIpxRipFilterMaskIPX RIP Filter Network/Subnet Mask.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4 |
snIpxRipFilterRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5 |
snIpxSapFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7 |
snIpxSapFilterTableIPX SAP Filter table. SEQUENCE OF SnIpxSapFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1 |
snIpxSapFilterEntryAn entry in the IPX SAP Filter table. SnIpxSapFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1 |
snIpxSapFilterIdThe filter ID for a filter entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1 |
snIpxSapFilterActionAction to take if the ipx packet match
with this filter.rw Action .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2 |
snIpxSapFilterTypeIPX SAP Filter type to be matched.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3 |
snIpxSapFilterNameIPX SAP Filter Name.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4 |
snIpxSapFilterRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5 |
snIpxIfFwdAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8 |
snIpxIfFwdAccessTableIPX IF Forward Access table. SEQUENCE OF SnIpxIfFwdAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1 |
snIpxIfFwdAccessEntryAn entry in the IPX Forward Access table. SnIpxIfFwdAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1 |
snIpxIfFwdAccessPortThe IPX interface to which the Forward Filter applies.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1 |
snIpxIfFwdAccessDirThe access direction of incoming packet filter
or outgoing packet filter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2 |
snIpxIfFwdAccessFilterListAn IPX IF Forward Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3 |
snIpxIfFwdAccessRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4 |
snIpxIfRipAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9 |
snIpxIfRipAccessTableIPX IF RIP Access table. SEQUENCE OF SnIpxIfRipAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1 |
snIpxIfRipAccessEntryAn entry in the IPX Forward Access table. SnIpxIfRipAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1 |
snIpxIfRipAccessPortThe IPX interface to which the RIP Filter applies.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1 |
snIpxIfRipAccessDirThe access direction of incoming packet filter
or outgoing packet filter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2 |
snIpxIfRipAccessFilterListAn IPX IF RIP Access Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3 |
snIpxIfRipAccessRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4 |
snIpxIfSapAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10 |
snIpxIfSapAccessTableIPX IF RIP Access table. SEQUENCE OF SnIpxIfSapAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1 |
snIpxIfSapAccessEntryAn entry in the IPX Forward Access table. SnIpxIfSapAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1 |
snIpxIfSapAccessPortThe IPX interface to which the SAP Filter applies.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1 |
snIpxIfSapAccessDirThe access direction of incoming packet filter
or outgoing packet filter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2 |
snIpxIfSapAccessFilterListAn IPX IF SAP Access Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3 |
snIpxIfSapAccessRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4 |
snIpxPortAddr OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11 |
snIpxPortAddrTableIPX port address table. SEQUENCE OF SnIpxPortAddrEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1 |
snIpxPortAddrEntryAn entry in the IPX Port Address table. SnIpxPortAddrEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1 |
snIpxPortAddrPortThe port index for port address entry.ro PortIndex .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1 |
snIpxPortAddrEncapThe IPX encapsulation type.
ethernet8022(1), ethernet8023(2),
ethernetII(3), ethernetSnap(4)
Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
a SNMP-SET error will be returned.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2 |
snIpxPortAddrNetNumAn unique Network number for the IPX interface port.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3 |
snIpxPortAddrRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4 |
snIpxPortAddrNetBiosFilterModeEnabled/Disabled NetBios Filter Mode status per Port Address entry.rw RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5 |
snIpxPortCounters OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12 |
snIpxPortCountersTableIPX port Counters table. SEQUENCE OF SnIpxPortCountersEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1 |
snIpxPortCountersEntryAn entry in the IPX Port Counters table. SnIpxPortCountersEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1 |
snIpxPortCountersPortThe port index for port Counters entry.ro PortIndex .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1 |
snIpxPortCountersRcvPktsCntIPX incoming packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2 |
snIpxPortCountersTxPktsCntIPX Outgoing packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3 |
snIpxPortCountersFwdPktsCntIPX forwarding packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4 |
snIpxPortCountersRcvDropPktsCntIPX receiving drop packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.5 |
snIpxPortCountersTxDropPktsCntIPX transmitting drop packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.6 |
snIpxPortCountersRcvFiltPktsCntIPX receiving filter packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7 |
snIpxPortCountersTxFiltPktsCntIPX transmitting filter packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8 |
More MIBs from HP
Browse all HPMIBs →BLADETYPE6-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE6-NETWORK-MIB.
2263 objects→
BLADETYPE5-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE5-NETWORK-MIB.
2240 objects→
BLADETYPE4-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE4-NETWORK-MIB.
2226 objects→
HPN-ICF-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HPIPFTRAP-MIB
Standard SNMP MIB module defining data structures for HPIPFTRAP-MIB.
1186 objects→
BLADETYPE2-NETWORK-MIB
The BLADETYPE2-NETWORK-MIB module provides SNMP access to Layer 3 configuration parameters, interface statistics, and routing information for blade server network interfaces. It enables monitoring of IP address assignments, interface operational states, and packet counters specific to the blade chassis network subsystem.
1056 objects→