FOUNDRY-SN-IP-VRRP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for FOUNDRY-SN-IP-VRRP-MIB.
90
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
90 total| Object Name |
|---|
snVrrpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.11.2.3.7.11.12.2.12.1 |
snVrrpGroupOperModeThe VRRP is configured on this system
either enabled or disabled and the
default is disabled mode.
disabled(0)..........disable VRRP
enabled(1)...........activate VRRPrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.1 |
snVrrpIfStateChangeTrapIndicates whether the SNMP agent process is
permitted to generate vrrp and vrrpe interface state change
traps.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.2 |
snVrrpIfMaxNumVridPerIntfIndicates the maximum number of VRID per interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.3 |
snVrrpIfMaxNumVridPerSystemIndicates the maximum number of VRID per system.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.4 |
snVrrpClearVrrpStatClear VRRP statistics command.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.5 |
snVrrpGroupOperModeVrrpextendedThe VRRP_extended is configured on this system either enabled
or disabled and the default is disabled mode.
disabled(0)..........disable VRRP extended
enabled(1)...........activate VRRP extendedrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.6 |
snVrrpIntf OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2 |
snVrrpIfTableThe VRRP Interface Table describes the interfaces from
the viewpoint of VRRP.deprecated SEQUENCE OF SnVrrpIfEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1 |
snVrrpIfEntryThe VRRP Interface Entry describes one interface from
the viewpoint of VRRP.deprecated SnVrrpIfEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1 |
snVrrpIfPortThe IP port of this VRRP interface.rodeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.1 |
snVrrpIfAuthTypeThe authentication type of this interface.rwdeprecated Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.2 |
snVrrpIfAuthPasswordThe simple text password is allowed if only if
the snVrrpIfAuthType type is simpleTextPasswd(1).rwdeprecated OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.3 |
snVrrpIfRxHeaderErrCntsThe received Header error counts in this interface.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.4 |
snVrrpIfRxAuthTypeErrCntsThe received authentication type error counts in this interface.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.5 |
snVrrpIfRxAuthPwdMismatchErrCntsThe received authentication password mismatched error counts in this interface.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.6 |
snVrrpIfRxVridErrCntsThe received unfound VRID error counts in this interface.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.7 |
snVrrpVirRtr OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3 |
snVrrpVirRtrTableThe VRRP virtual router Entry describes one virtual router from
the viewpoint of VRRP.deprecated SEQUENCE OF SnVrrpVirRtrEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1 |
snVrrpVirRtrEntryThe VRRP virtual router Entry describes one virtual router from
the viewpoint of VRRP.deprecated SnVrrpVirRtrEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1 |
snVrrpVirRtrPortThe IP port of this VRRP interface.rodeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1 |
snVrrpVirRtrIdOne of the virtual router ID of this VRRP interface.rodeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2 |
snVrrpVirRtrOwnershipThe ownership of this VRRP router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this VRRP router interface.rwdeprecated Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3 |
snVrrpVirRtrCfgPriorityThe higher the number the higher the priority is.
This parameter decides which backup router should becomes
the Active Router for the interface. A backup Router with
higher priority selected to becomes the Active Router.
Therefore, this Object can be set if only if snVrrpVirRtrOwnership
is set to backup(2).rwdeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4 |
snVrrpVirRtrTrackPriorityThe higher the number the higher the priority is.
after this object is configured, the snVrrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
changes from UP to DOWN.rwdeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5 |
snVrrpVirRtrCurrPriorityThe higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN.rodeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6 |
snVrrpVirRtrHelloIntTime interval between advertisements (seconds).rwdeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7 |
snVrrpVirRtrDeadIntDead interval (seconds).rwdeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8 |
snVrrpVirRtrPreemptModeThis mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption.rwdeprecated Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9 |
snVrrpVirRtrStateThis object specifies the VRRP Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state.rodeprecated Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10 |
snVrrpVirRtrActivateThis object specifies the VRRP Router's activate command as:
disabled(0)...deactivate this VRRP Router.
enabled(1)....activate this VRRP Router.rwdeprecated Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11 |
snVrrpVirRtrIpAddrMaskThe numbers of IP Addresses of this virtual router of this interface.rwdeprecated OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12 |
snVrrpVirRtrTrackPortMaskThis object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Chassis/Stackable router VRRP Track port membership.
The size of the OCTET STRING for Chassis is 32.
The size of the OCTET STRING for Stackable is 4.
(It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)rwdeprecated OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13 |
snVrrpVirRtrTrackVifMaskThis object specifies the identity of the virtual interface
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Chassis/Stackable router VRRP Track port membership
The size of the OCTET STRING for Chassis is 8.
The size of the OCTET STRING for Stackable is 4.
(It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)rwdeprecated OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14 |
snVrrpVirRtrRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
VirRtr the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrwdeprecated Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15 |
snVrrpVirRtrRxArpPktDropCntsThe received VRRP ARP Packet Drop Counts.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16 |
snVrrpVirRtrRxIpPktDropCntsThe received VRRP IP Packet Drop Counts.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17 |
snVrrpVirRtrRxPortMismatchCntsThe received VRRP Port mismatching Counts.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18 |
snVrrpVirRtrRxNumOfIpMismatchCntsThe received VRRP Number of IP Addresses mismatching Counts.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19 |
snVrrpVirRtrRxIpMismatchCntsThe received VRRP IP Address mismatching Counts.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20 |
snVrrpVirRtrRxHelloIntMismatchCntsThe counts of the virtual router interface with hello interval mismatch counts.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21 |
snVrrpVirRtrRxPriorityZeroFromMasterCntsThe counts of the virtual router interface with Priority zero from the master.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22 |
snVrrpVirRtrRxHigherPriorityCntsThe counts of the virtual router interface with higher Priority.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23 |
snVrrpVirRtrTransToMasterStateCntsThe counts of the virtual router interface transition to master state.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24 |
snVrrpVirRtrTransToBackupStateCntsThe counts of the virtual router interface transition to backup state.rodeprecated Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25 |
snVrrpVirRtrCurrDeadIntCurrent Dead interval (in 100 milliseconds).rodeprecated INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26 |
snVrrpVirRtrTrackPortListThis object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the other 8-bit is the port number. Default value
is 0 length octet string. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VRRP physical track port membership.rwdeprecated OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27 |
snVrrpVirRtrTrackVifPortListThis object specifies the identity of the virtual interface
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. Default value
is 0 length octet string. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VRRP virtual port track membership.rwdeprecated OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28 |
snVrrpIntf2 OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4 |
snVrrpIf2TableThe VRRP and VRRPE Interface Table describes the interfaces from
the viewpoint of VRRP and VRRPE. SEQUENCE OF SnVrrpIf2Entry .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1 |
snVrrpIf2EntryThe VRRP and VRRPE Interface Entry describes one interface from
the viewpoint of VRRP and VRRPE. SnVrrpIf2Entry .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1 |
snVrrpIf2AuthTypeThe authentication type of this interface.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.1 |
snVrrpIf2AuthPasswordThe simple text password is allowed if only if
the snVrrpIf2AuthType type is simpleTextPasswd(1).rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.2 |
snVrrpIf2RxHeaderErrCntsThe received Header error counts in this interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.3 |
snVrrpIf2RxAuthTypeErrCntsThe received authentication type error counts in this interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.4 |
snVrrpIf2RxAuthPwdMismatchErrCntsThe received authentication password mismatched error counts in this interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.5 |
snVrrpIf2RxVridErrCntsThe received unfound VRID error counts in this interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.6 |
snVrrpVirRtr2 OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5 |
snVrrpVirRtr2TableThe Vrrp and Vrrpe virtual router Entry describes one virtual router from
the viewpoint of Vrrp and Vrrpe. SEQUENCE OF SnVrrpVirRtr2Entry .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1 |
snVrrpVirRtr2EntryThe Vrrp and Vrrpe virtual router Entry describes one virtual router from
the viewpoint of Vrrp and Vrrpe. SnVrrpVirRtr2Entry .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1 |
snVrrpVirRtr2IdOne of the virtual router ID of this Vrrp and Vrrpe interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.1 |
snVrrpVirRtr2OwnershipThe ownership of this Vrrp router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this Vrrp router interface.
vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0).rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.2 |
snVrrpVirRtr2CfgPriorityThis object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has ceased
to participate in VRRP and a backup virtual router should
transition to become a new master.
A priority of 255 is only for VRRP - owner. Not valid for number to
configure VRRPE.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.3 |
snVrrpVirRtr2TrackPriorityThe higher the number the higher the priority is.
after this object is configured, the snVrrpVirRtr2CurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
changes from UP to DOWN.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.4 |
snVrrpVirRtr2CurrPriorityThe higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.5 |
snVrrpVirRtr2HelloIntTime interval between advertisements (seconds).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.6 |
snVrrpVirRtr2DeadIntDead interval (seconds).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.7 |
snVrrpVirRtr2PreemptModeThis mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.8 |
snVrrpVirRtr2StateThis object specifies the Vrrp and vrrpe Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.9 |
snVrrpVirRtr2IpAddrMaskThe numbers of IP Addresses of this virtual router of this interface.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.10 |
snVrrpVirRtr2ActivateThis object specifies the Vrrp Router's activate command as:
disabled(0)...deactivate this Vrrp and Vrrpe Routers.
enabled(1)....activate this Vrrp and Vrrpe Routers.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.11 |
snVrrpVirRtr2BackupIntTime interval between backup routers hello message advertisements (seconds).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.12 |
snVrrpVirRtr2RowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
VirRtr the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.13 |
snVrrpVirRtr2RxArpPktDropCntsThe received Vrrp and Vrrpe ARP Packet Drop Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.14 |
snVrrpVirRtr2RxIpPktDropCntsThe received Vrrp and Vrrpe IP Packet Drop Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.15 |
snVrrpVirRtr2RxPortMismatchCntsThe received Vrrp and Vrrpe Port mismatching Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.16 |
snVrrpVirRtr2RxNumOfIpMismatchCntsThe received Vrrp and Vrrpe Number of IP Addresses mismatching Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.17 |
snVrrpVirRtr2RxIpMismatchCntsThe received Vrrp and Vrrpe IP Address mismatching Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.18 |
snVrrpVirRtr2RxHelloIntMismatchCntsThe counts of the virtual router interface with hello interval mismatch counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.19 |
snVrrpVirRtr2RxPriorityZeroFromMasterCntsThe counts of the virtual router interface with Priority zero from the master.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.20 |
snVrrpVirRtr2RxHigherPriorityCntsThe counts of the virtual router interface with higher Priority.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.21 |
snVrrpVirRtr2TransToMasterStateCntsThe counts of the virtual router interface transition to master state.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.22 |
snVrrpVirRtr2TransToBackupStateCntsThe counts of the virtual router interface transition to backup state.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.23 |
snVrrpVirRtr2CurrDeadIntCurrent Dead interval (in 100 milliseconds).ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.24 |
snVrrpVirRtr2TrackPortListThis object specifies the identity of the physical port and virtual ports
whose state is to be monitored. Each port index is
an ifIndex, if there are consecutive 4 or more ifIndex then
they will be encoded like below.
Encoding and decoding scheme is range based:
Each range prefix with 0000 (2 octets) where 0000 is not valid
ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2
octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
Ex:
port list: 0001..0005 0015 0032..0047
Port list in PDU: 0000 0001 0005 000f 0000 0020 002f.
If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VRRP and VRRP-E physical track port membership.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.25 |
snVrrpVirRtr2AdvertiseBackupSet Advertise this backup router to masterrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.26 |
snVrrpVirRtr2MasterIpAddrThe master router's real/virtual (primary) IP address. This is
the IP address listed as the source in VRRP and VRRPE advertisement
last received by this virtual router.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.27 |
snVrrpVirRtr2IpAddrCountThe number of IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the vrrpAssoIpAddrTable that correspond to a given IF
index/VRID pair.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.28 |
snVrrpVirRtr2VirtualMacAddrThe virtual MAC address of the virtual router. Although this
object can be derived from the 'snVrrpVirRtr2VrId' object, it is
defined so that it is easily obtainable by a management
application and can be included in VRRP-related SNMP traps.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.29 |