FN10-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
302
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
302 total| Object Name |
|---|
cmu OBJECT IDENTIFIER .1.3.6.1.4.1.3 |
IMPORTS Unknown .1.3.6.1.4.1.3 |
systems OBJECT IDENTIFIER .1.3.6.1.4.1.3.1 |
cmuSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.3.1.1 |
cmuKip OBJECT IDENTIFIER .1.3.6.1.4.1.3.1.2 |
cmuRouter OBJECT IDENTIFIER .1.3.6.1.4.1.3.1.3 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.3.2 |
sigma OBJECT IDENTIFIER .1.3.6.1.4.1.97 |
sxTempOKTrapSent whenever the module's temperature transitions from
too hot to okay, and vice versa. TRAP-TYPE .1.3.6.1.4.1.97.0.1 |
sxWriteStatusTrapSent when a bank of Flash EPROM has been erased. If
sxswdisWriteStatus indicates success, then the unit is ready
to be downloaded with the new software. TRAP-TYPE .1.3.6.1.4.1.97.0.2 |
sxPortFunctionsTrapSent whenever the current functional state (active
protocols) of the port has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.3 |
sxRxQueuesTrapSent whenever the number of times that the port's receiver
has stopped receiving packets due to buffer space shortages
has exceeded the port's limit. TRAP-TYPE .1.3.6.1.4.1.97.0.4 |
sxTxStormFlagTrapSent whenever multicast storm protection has been invoked
for the port. TRAP-TYPE .1.3.6.1.4.1.97.0.5 |
sxTxCongestsTrapSent whenever packets destined for the unit itself were
discarded due to lack of buffer space. TRAP-TYPE .1.3.6.1.4.1.97.0.6 |
sxFilterThreshTrapSent whenever usage of a port's combination filter has
exceeded the filter's limits. TRAP-TYPE .1.3.6.1.4.1.97.0.7 |
sxDebugStringIdTrapSend whenever the unit has a debug text string to be
displayed. The text strings are sent in a stream-like
fashion. TRAP-TYPE .1.3.6.1.4.1.97.0.8 |
sxLpbkOperationTrapSend whenever the unit has finished a loop back test, or
a loop back error has been detected. TRAP-TYPE .1.3.6.1.4.1.97.0.9 |
sxTrunkStateTrapA trunking state change transition has occurred. The possible
transitions are:
CLOSED-ONEWAY
ONEWAY-PERTURBED
PERTURBED-JOINED
JOINED-HELDDOWN
CLOSED-HELDDOWN
ONEWAY-HELDDOWN
PERTURBED-HELDDOWN TRAP-TYPE .1.3.6.1.4.1.97.0.10 |
sxTrunkBridgeAddrTrapThe associated trunking MAC address of the bridge ID of the remote
bridge has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.11 |
sxTrunkIPAddrTrapThe associated trunking IP address of the remote bridge has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.12 |
sxTrunkErrorTrapAn error has occurred in trunking. TRAP-TYPE .1.3.6.1.4.1.97.0.13 |
sxTrunkLinkOrdinalTrapThe port's index in the trunking group has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.14 |
sxTrunkLinkCountTrapThe number of ports in the trunking group has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.15 |
sxDiagUnitBootedTrapThe unit has booted. sxadminFatalErr contains information about
why the unit rebooted. TRAP-TYPE .1.3.6.1.4.1.97.0.16 |
sxStorageFailureTrapSent if the unit's Configuration EEPROM has failed. The unit
will not be able to reboot, and must be returned to the
factory. TRAP-TYPE .1.3.6.1.4.1.97.0.17 |
sxPortCongestedTrapSent whenever outbound congestion control has been invoked
for the port. TRAP-TYPE .1.3.6.1.4.1.97.0.18 |
sxTopChangeBegunTrapThe spanning tree topology has begun to change. TRAP-TYPE .1.3.6.1.4.1.97.0.19 |
sxTopChangeEndTrapThe spanning tree topology has stopped changing. TRAP-TYPE .1.3.6.1.4.1.97.0.20 |
sxIfErrorsTrapSent whenever the number of hardware errors in received and
transmitted packets has exceeded the port's limit. TRAP-TYPE .1.3.6.1.4.1.97.0.21 |
sxStRootIDTrapThe spanning tree root bridge ID for the unit has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.22 |
sxStRootCostTrapThe unit's spanning tree cost to the root bridge has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.23 |
sxStRootPortTrapThe unit's spanning tree root port has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.24 |
sxStMaxAgeTrapThe unit's spanning tree maximum age has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.25 |
sxStHelloTimeTrapThe unit's spanning tree hello time has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.26 |
sxStForwardDelayTrapThe unit's spanning tree forward delay time has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.27 |
sxStDesigRootTrapThe Root Bridge ID in received Spanning Tree Configuration BPDUs
from the port has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.28 |
sxStPortDesigBridgeTrapThe bridge ID of the spanning tree designated bridge of the LAN/WAN
to which the port is attached has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.29 |
sxStPortDesigCostTrapThe cost to the spanning tree root bridge from the designated port of
the LAN/WAN to which the port is attached has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.30 |
sxStPortDesigPortTrapThe port ID of the spanning tree designated port of the LAN/WAN
to which the port is attached has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.31 |
sxStPortStateTrapThe spanning tree state of the port has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.32 |
sxhwDiagTrapSent whenever the unit's diagnostics have indicated an error. TRAP-TYPE .1.3.6.1.4.1.97.0.100 |
sys OBJECT IDENTIFIER .1.3.6.1.4.1.97.1 |
sysIDro Enumeration .1.3.6.1.4.1.97.1.1 |
sysResetrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.1.2 |
sysTrapAckro Enumeration .1.3.6.1.4.1.97.1.3 |
sysTrapTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.1.4 |
sysTrapRetryro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.1.5 |
sysTrapPortrw INTEGER .1.3.6.1.4.1.97.1.6 |
es-1xe OBJECT IDENTIFIER .1.3.6.1.4.1.97.2 |
sxhw OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.1 |
sxhwDiagCodero OCTET STRING .1.3.6.1.4.1.97.2.1.1 |
sxhwManufDataro OCTET STRING .1.3.6.1.4.1.97.2.1.2 |
sxhwPortCountro INTEGER .1.3.6.1.4.1.97.2.1.3 |
sxhwPortTable SEQUENCE OF SxhwPortEntry .1.3.6.1.4.1.97.2.1.4 |
sxhwPortEntry SxhwPortEntry .1.3.6.1.4.1.97.2.1.4.1 |
sxhwPortIndexro INTEGER .1.3.6.1.4.1.97.2.1.4.1.1 |
sxhwPortTypero Enumeration .1.3.6.1.4.1.97.2.1.4.1.2 |
sxhwPortSubTypero Enumeration .1.3.6.1.4.1.97.2.1.4.1.3 |
sxhwPortDiagPassedro Enumeration .1.3.6.1.4.1.97.2.1.4.1.4 |
sxhwAddrro OCTET STRING .1.3.6.1.4.1.97.2.1.4.1.5 |
sxhwUpLinkSpecifies whether the Up-Link I/O module is existedro Enumeration .1.3.6.1.4.1.97.2.1.5 |
sxhwUpLinkManufDataThis is a 32-byte array which contains the part number,
serial number, and hardware revision level of the Up-Link
I/O module. This array is valid only when the sxhwUplink
is true. If sxhwUplink is false, it returns an errorro OCTET STRING .1.3.6.1.4.1.97.2.1.6 |
sxsw OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.2 |
sxswNumberro INTEGER .1.3.6.1.4.1.97.2.2.1 |
sxswFilesetTable SEQUENCE OF SxswFileset .1.3.6.1.4.1.97.2.2.2 |
sxswFileset SxswFileset .1.3.6.1.4.1.97.2.2.2.1 |
sxswIndexro Enumeration .1.3.6.1.4.1.97.2.2.2.1.1 |
sxswDescro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.2.2.2.1.2 |
sxswCountro INTEGER .1.3.6.1.4.1.97.2.2.2.1.3 |
sxswTypero OCTET STRING -- { file-nam(1), -- file-be(2), -- file-powerup(10), -- file-diagnostics(11) -- } .1.3.6.1.4.1.97.2.2.2.1.4 |
sxswSizesro OCTET STRING .1.3.6.1.4.1.97.2.2.2.1.5 |
sxswStartsro OCTET STRING .1.3.6.1.4.1.97.2.2.2.1.6 |
sxswBasesro OCTET STRING .1.3.6.1.4.1.97.2.2.2.1.7 |
sxswFlashBankro Enumeration .1.3.6.1.4.1.97.2.2.2.1.8 |
sxadmin OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.3 |
sxadminFatalErrro OCTET STRING .1.3.6.1.4.1.97.2.3.1 |
sxadminAnyPassrw OCTET STRING .1.3.6.1.4.1.97.2.3.2 |
sxadminGetPassrw OCTET STRING .1.3.6.1.4.1.97.2.3.3 |
sxadminNMSIPAddrrw IpAddress .1.3.6.1.4.1.97.2.3.4 |
sxadminAlarmDynamicro Enumeration .1.3.6.1.4.1.97.2.3.5 |
sxadminAlarmAddressChangero Enumeration .1.3.6.1.4.1.97.2.3.6 |
sxadminStorageFailurero Enumeration .1.3.6.1.4.1.97.2.3.7 |
sxadminAuthenticationFailurero IpAddress .1.3.6.1.4.1.97.2.3.8 |
sxadminStatsExtendedrw Enumeration .1.3.6.1.4.1.97.2.3.9 |
sxadminNAMReceiveCongestsro Counter .1.3.6.1.4.1.97.2.3.10 |
sxadminArpEntriesro Counter .1.3.6.1.4.1.97.2.3.11 |
sxadminArpStaticsro Counter .1.3.6.1.4.1.97.2.3.12 |
sxadminArpOverflowsro Counter .1.3.6.1.4.1.97.2.3.13 |
sxadminIpEntriesro Counter .1.3.6.1.4.1.97.2.3.14 |
sxadminIpStaticsro Counter .1.3.6.1.4.1.97.2.3.15 |
sxadminStaticPreferencerw INTEGER .1.3.6.1.4.1.97.2.3.16 |
sxadminRipPreferencerw INTEGER .1.3.6.1.4.1.97.2.3.17 |
sxadminRipRouteDiscardsro Counter .1.3.6.1.4.1.97.2.3.18 |
sxadminRebootConfigrw Enumeration .1.3.6.1.4.1.97.2.3.19 |
sxadminTempOKro Enumeration .1.3.6.1.4.1.97.2.3.20 |
sxadminDisableButtonrw Enumeration .1.3.6.1.4.1.97.2.3.21 |
sxadminButtonSelectionrw Enumeration .1.3.6.1.4.1.97.2.3.22 |
sxadminLEDProgramOptionrw Enumeration .1.3.6.1.4.1.97.2.3.23 |
sxadminNAMTxBufferCountrw INTEGER .1.3.6.1.4.1.97.2.3.24 |
sxadminNAMRxBufferSizerw INTEGER .1.3.6.1.4.1.97.2.3.25 |
sxadminCpuUtilizationro Enumeration .1.3.6.1.4.1.97.2.3.26 |
sxadminExtraTrunkGroupingIf true(1), then as many as 8 trunk groups may be created,
rather than the default limit of 4 trunk groups. When true(1),
fewer links will be allowed in each trunk group, i.e., a maximum
of 4 links will be used in each trunk group, instead of the
default limit of 8 links per trunk group.rw Enumeration .1.3.6.1.4.1.97.2.3.27 |
sxswdis OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.4 |
sxswdisDescThe description (0-32 bytes) of the software set currently
being downloaded, or a description of the software set last
downloaded since the last boot.ro OCTET STRING .1.3.6.1.4.1.97.2.4.1 |
sxswdisAccessThe version of software that may be downloaded. Attempts to
download other versions of software will be rejected. The
value for swdisAccess is embedded within the software files
that are to be distributed via TFTP. Its value may be
derived from the names of the software files. the NMS operator
may wish to use the following special values:
protected (1) No software downloads will be accepted
any-software (2) A software download of any version of new
software will be accepted - this is the factory defaultrw Enumeration .1.3.6.1.4.1.97.2.4.2 |
sxswdisWriteStatusThe status of the erase/write operation.ro Enumeration .1.3.6.1.4.1.97.2.4.3 |
sxswdisConfigIpThe IP address of the NMS (i.e., any IP host) that is allowed
to use TFTP to send/retrieve the configuration file of the
device. A value of 0.0.0.0 (which is the factory specified
default) prevents any NMS from obtaining access, while a
value of 255.255.255.255 gives every NMS permission.rw IpAddress .1.3.6.1.4.1.97.2.4.4 |
sxswdisConfigRetryTimeThe number of seconds that the device will wait for an
acknowledgment before it retransmits an unacknowledged TFTP
data block. The factory specified default is 5 seconds.rw INTEGER .1.3.6.1.4.1.97.2.4.5 |
sxswdisConfigTotalTimeoutThe number of seconds that the device will wait for an
acknowledgment to a data block before it cancels a TFTP
session. The factory specified default is 25 seconds.rw INTEGER .1.3.6.1.4.1.97.2.4.6 |
sxaddr OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.5 |
sxaddrStaticsro Counter .1.3.6.1.4.1.97.2.5.1 |
sxaddrDynamicsro Counter .1.3.6.1.4.1.97.2.5.2 |
sxaddrDynamicMaxrw Gauge .1.3.6.1.4.1.97.2.5.3 |
sxaddrDynamicOverflowsro Counter .1.3.6.1.4.1.97.2.5.4 |
sxaddrFlagsrw INTEGER .1.3.6.1.4.1.97.2.5.5 |
sxaddrMACrw OCTET STRING .1.3.6.1.4.1.97.2.5.6 |
sxaddrPortrw INTEGER .1.3.6.1.4.1.97.2.5.7 |
sxaddrOperationrw Enumeration .1.3.6.1.4.1.97.2.5.8 |
sxaddrIndexrw INTEGER .1.3.6.1.4.1.97.2.5.9 |
sxaddrNextrw INTEGER .1.3.6.1.4.1.97.2.5.10 |
sxaddrAgerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.5.11 |
sxaddrDestAgerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.5.12 |
sxaddrRxPktsrw Counter .1.3.6.1.4.1.97.2.5.13 |
sxaddrRxCharsrw Counter .1.3.6.1.4.1.97.2.5.14 |
sxaddrRxMultiPktsrw Counter .1.3.6.1.4.1.97.2.5.15 |
sxaddrRxFwdPktsrw Counter .1.3.6.1.4.1.97.2.5.16 |
sxaddrTxPktsrw Counter .1.3.6.1.4.1.97.2.5.17 |
sxaddrTxCharsrw Counter .1.3.6.1.4.1.97.2.5.18 |
sxaddrBlockSizerw INTEGER .1.3.6.1.4.1.97.2.5.19 |
sxaddrBlockrw OCTET STRING .1.3.6.1.4.1.97.2.5.20 |
sxaddrAlarmMACro OCTET STRING .1.3.6.1.4.1.97.2.5.21 |
sxif OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.6 |
sxifTable SEQUENCE OF SxifEntry .1.3.6.1.4.1.97.2.6.1 |
sxifEntry SxifEntry .1.3.6.1.4.1.97.2.6.1.1 |
sxifIndexro INTEGER .1.3.6.1.4.1.97.2.6.1.1.1 |
sxifRxCntro INTEGER .1.3.6.1.4.1.97.2.6.1.1.2 |
sxifTxCntro INTEGER .1.3.6.1.4.1.97.2.6.1.1.3 |
sxifThresholdrw INTEGER .1.3.6.1.4.1.97.2.6.1.1.4 |
sxifThresholdTimerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.6.1.1.5 |
sxifRxQueueThreshrw INTEGER .1.3.6.1.4.1.97.2.6.1.1.6 |
sxifRxQueueThreshTimerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.6.1.1.7 |
sxifTxStormCntrw INTEGER .1.3.6.1.4.1.97.2.6.1.1.8 |
sxifTxStormTimerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.6.1.1.9 |
sxifFilterFloodSourceSamerw Enumeration .1.3.6.1.4.1.97.2.6.1.1.10 |
sxifFilterAllSourceLearnedrw Enumeration .1.3.6.1.4.1.97.2.6.1.1.11 |
sxifFilterNoLearningrw Enumeration .1.3.6.1.4.1.97.2.6.1.1.12 |
sxifFilterAllDestLearnedrw Enumeration .1.3.6.1.4.1.97.2.6.1.1.13 |
sxifCongestTimerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.6.1.1.14 |
sxifQueueTimerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.6.1.1.15 |
sxifFunctionro INTEGER .1.3.6.1.4.1.97.2.6.1.1.16 |
sxifRxPacketro OCTET STRING .1.3.6.1.4.1.97.2.6.1.1.17 |
sxifRxHwFCSsro Counter .1.3.6.1.4.1.97.2.6.1.1.18 |
sxifRxQueuesro Counter .1.3.6.1.4.1.97.2.6.1.1.19 |
sxifTxPacketro OCTET STRING .1.3.6.1.4.1.97.2.6.1.1.20 |
sxifTxStormsro Counter .1.3.6.1.4.1.97.2.6.1.1.21 |
sxifTxDestsro Counter .1.3.6.1.4.1.97.2.6.1.1.22 |
sxifLan1rw INTEGER .1.3.6.1.4.1.97.2.6.1.1.23 |
sxifLan2rw INTEGER .1.3.6.1.4.1.97.2.6.1.1.24 |
sxifLan3rw INTEGER .1.3.6.1.4.1.97.2.6.1.1.25 |
sxifLan4rw INTEGER .1.3.6.1.4.1.97.2.6.1.1.26 |
sxifStatisticsTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.6.1.1.27 |
sxifIpAddrrw IpAddress .1.3.6.1.4.1.97.2.6.1.1.28 |
sxifIpGroupAddrrw IpAddress .1.3.6.1.4.1.97.2.6.1.1.29 |
sxifForwardedCharsro Counter .1.3.6.1.4.1.97.2.6.1.1.30 |
sxifFilteredCharsro Counter .1.3.6.1.4.1.97.2.6.1.1.31 |
sxifDescrrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.2.6.1.1.32 |
sxdot3 OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.7 |
sxdot3Table SEQUENCE OF Sxdot3Entry .1.3.6.1.4.1.97.2.7.1 |
sxdot3Entry Sxdot3Entry .1.3.6.1.4.1.97.2.7.1.1 |
sxdot3Indexro INTEGER .1.3.6.1.4.1.97.2.7.1.1.1 |
sxdot3TPLinkOKro Enumeration .1.3.6.1.4.1.97.2.7.1.1.2 |
sxdot3LedOnro Enumeration .1.3.6.1.4.1.97.2.7.1.1.3 |
sxdot3RxCollisionsro Counter .1.3.6.1.4.1.97.2.7.1.1.4 |
sxdot3RxRuntsro Counter .1.3.6.1.4.1.97.2.7.1.1.5 |
sxdot3RxLateCollsro Counter .1.3.6.1.4.1.97.2.7.1.1.6 |
sxdot3TxJabbersro Counter .1.3.6.1.4.1.97.2.7.1.1.7 |
sxdot3TxBabblesro Counter .1.3.6.1.4.1.97.2.7.1.1.8 |
sxdot3TxCollisionsro Counter .1.3.6.1.4.1.97.2.7.1.1.9 |
sxdot3RxErrInforo OCTET STRING .1.3.6.1.4.1.97.2.7.1.1.10 |
sxdot3TxErrInforo OCTET STRING .1.3.6.1.4.1.97.2.7.1.1.11 |
sxdot3FuseOkayro Enumeration .1.3.6.1.4.1.97.2.7.1.1.12 |
sxdot3SpeedSelectionrw Enumeration .1.3.6.1.4.1.97.2.7.1.1.13 |
sxuart OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.8 |
sxuartTable SEQUENCE OF SxuartEntry .1.3.6.1.4.1.97.2.8.1 |
sxuartEntry SxuartEntry .1.3.6.1.4.1.97.2.8.1.1 |
sxuartIndexro INTEGER .1.3.6.1.4.1.97.2.8.1.1.1 |
sxuartBaudrw Enumeration .1.3.6.1.4.1.97.2.8.1.1.2 |
sxuartAlignmentErrorsro Counter .1.3.6.1.4.1.97.2.8.1.1.3 |
sxuartOverrunErrorsro Counter .1.3.6.1.4.1.97.2.8.1.1.4 |
sxfilter OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.9 |
sxfilterMaxCountro INTEGER .1.3.6.1.4.1.97.2.9.1 |
sxfilterCurrentCountro INTEGER .1.3.6.1.4.1.97.2.9.2 |
sxfilterDeleteIDrw INTEGER .1.3.6.1.4.1.97.2.9.3 |
sxfilterNextIDro INTEGER .1.3.6.1.4.1.97.2.9.4 |
sxfilterAddIDrw INTEGER .1.3.6.1.4.1.97.2.9.5 |
sxfilterAddIndexrw INTEGER .1.3.6.1.4.1.97.2.9.6 |
sxfilterTable SEQUENCE OF SxfilterEntry .1.3.6.1.4.1.97.2.9.7 |
sxfilterEntry SxfilterEntry .1.3.6.1.4.1.97.2.9.7.1 |
sxfilterIndexro INTEGER .1.3.6.1.4.1.97.2.9.7.1.1 |
sxfilterIDro INTEGER .1.3.6.1.4.1.97.2.9.7.1.2 |
sxfilterPortNorw INTEGER .1.3.6.1.4.1.97.2.9.7.1.3 |
sxfilterComboTyperw INTEGER .1.3.6.1.4.1.97.2.9.7.1.4 |
sxfilterFlagsrw INTEGER .1.3.6.1.4.1.97.2.9.7.1.5 |
sxfilterFramerw Enumeration .1.3.6.1.4.1.97.2.9.7.1.6 |
sxfilterSourcerw OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.7 |
sxfilterSourceEndrw OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.8 |
sxfilterDestrw OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.9 |
sxfilterDestEndrw OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.10 |
sxfilterSourceMaskrw OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.11 |
sxfilterDestMaskrw OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.12 |
sxfilterSrcLanrw INTEGER .1.3.6.1.4.1.97.2.9.7.1.13 |
sxfilterOffsetrw INTEGER .1.3.6.1.4.1.97.2.9.7.1.14 |
sxfilterFieldrw OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.15 |
sxfilterMaskrw OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.16 |
sxfilterThresholdrw INTEGER .1.3.6.1.4.1.97.2.9.7.1.17 |
sxfilterThreshTimerw INTEGER .1.3.6.1.4.1.97.2.9.7.1.18 |
sxfilterThreshFlagro Enumeration .1.3.6.1.4.1.97.2.9.7.1.19 |
sxfilterPktCntsro Counter .1.3.6.1.4.1.97.2.9.7.1.20 |
sxfilterLastSrcro OCTET STRING .1.3.6.1.4.1.97.2.9.7.1.21 |
sxfilterByteCntsro Counter .1.3.6.1.4.1.97.2.9.7.1.22 |
sxdebug OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.10 |
sxdebugStringIDro INTEGER .1.3.6.1.4.1.97.2.10.1 |
sxdebugStringro OCTET STRING .1.3.6.1.4.1.97.2.10.2 |
sxdebugTable SEQUENCE OF SxdebugEntry .1.3.6.1.4.1.97.2.10.3 |
sxdebugEntry SxdebugEntry .1.3.6.1.4.1.97.2.10.3.1 |
sxdebugIndexro INTEGER .1.3.6.1.4.1.97.2.10.3.1.1 |
sxdebugOperationrw Enumeration .1.3.6.1.4.1.97.2.10.3.1.2 |
sxdebugBaserw INTEGER .1.3.6.1.4.1.97.2.10.3.1.3 |
sxdebugLengthrw INTEGER .1.3.6.1.4.1.97.2.10.3.1.4 |
sxdebugDatarw OCTET STRING .1.3.6.1.4.1.97.2.10.3.1.5 |
sxlpbk OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.11 |
sxlpbkTable SEQUENCE OF SxlpbkEntry .1.3.6.1.4.1.97.2.11.1 |
sxlpbkEntry SxlpbkEntry .1.3.6.1.4.1.97.2.11.1.1 |
sxlpbkIndexro INTEGER .1.3.6.1.4.1.97.2.11.1.1.1 |
sxlpbkOperationrw Enumeration .1.3.6.1.4.1.97.2.11.1.1.2 |
sxlpbkDestAddrrw OCTET STRING .1.3.6.1.4.1.97.2.11.1.1.3 |
sxlpbkPktNumrw INTEGER .1.3.6.1.4.1.97.2.11.1.1.4 |
sxlpbkIntervalrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.11.1.1.5 |
sxlpbkPktLengthrw INTEGER .1.3.6.1.4.1.97.2.11.1.1.6 |
sxlpbkIncrementsrw INTEGER .1.3.6.1.4.1.97.2.11.1.1.7 |
sxlpbkGoodsro Counter .1.3.6.1.4.1.97.2.11.1.1.8 |
sxlpbkErrorNoReceivesro Counter .1.3.6.1.4.1.97.2.11.1.1.9 |
sxlpbkErrorBadReceivesro Counter .1.3.6.1.4.1.97.2.11.1.1.10 |
sxlpbkErrorSizero INTEGER .1.3.6.1.4.1.97.2.11.1.1.11 |
sxlpbkErrorSentro OCTET STRING .1.3.6.1.4.1.97.2.11.1.1.12 |
sxlpbkErrorReceivedro OCTET STRING .1.3.6.1.4.1.97.2.11.1.1.13 |
sxlpbkErrorOffsetro INTEGER .1.3.6.1.4.1.97.2.11.1.1.14 |
sxproto OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.12 |
sxprotoTableThis table contains configuration information specify-
ing the types of protocols used to bridge, route,
translate, and filter frames for each port. SEQUENCE OF SxprotoEntry .1.3.6.1.4.1.97.2.12.1 |
sxprotoEntryEach entry in this table specifies which protocols are
used by a particular port in the ES/1. SxprotoEntry .1.3.6.1.4.1.97.2.12.1.1 |
sxprotoIfIndexIdentifies the interface (port) to which this entry's
information belongs. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.ro INTEGER .1.3.6.1.4.1.97.2.12.1.1.1 |
sxprotoBridgeDefines the bridging method to be applied to frames
received at, or destined for, this port. Ethernet and
FDDI ports may be configured for transparent, srt, or
none. Token Ring ports may be configured for any of
the four options. The UART may only be configured to
none.rw Enumeration .1.3.6.1.4.1.97.2.12.1.1.2 |
sxprotoSuppressBpduAllows transmission of spanning tree protocol packets
to be suppressed. If normal(1), 802.1d spanning tree
packets and source-routing spanning tree packets are
transmitted as usual. If suppressed(2), these packets
are not transmitted. This option may be needed for in-
teroperability with non-802.1d spanning tree protocols
(e.g., DEC LanBridge 100).rw Enumeration .1.3.6.1.4.1.97.2.12.1.1.3 |
sxprotoRipListenSpecifies whether the port should listen for internet
Routing Information Protocol (RFC-1058) packets, in order to
build the routing table for the unit.rw Enumeration .1.3.6.1.4.1.97.2.12.1.1.4 |
sxprotoTrunkingSpecifies whether SMC's trunking protocol (an extension
to the standard Spanning Tree) is to be used over this port.rw Enumeration .1.3.6.1.4.1.97.2.12.1.1.5 |
sxsprotoCollisionReliefSpecifies whether the 10 Mbits Ethernet modified back-off
algorithm is to be used. This option forces Ethernet port
to stop the back-off timer when a transmit collision occured.
It will start the timer again until no carrier on the wire.
This option can reduce the number of transmit collisions. It
may also slow down the transmit process under heavy loaded
network.rw Enumeration .1.3.6.1.4.1.97.2.12.1.1.6 |
sxtrunk OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.13 |
sxtrunkTableThis table describes the trunking status and attributes of
the interfaces that are configured for bridge trunking. SEQUENCE OF SxtrunkEntry .1.3.6.1.4.1.97.2.13.1 |
sxtrunkEntryAn entry exists in this table for each physical interface
(port) that is configured for trunking. SxtrunkEntry .1.3.6.1.4.1.97.2.13.1.1 |
sxtrunkIfIndexIdentifies a physical interface (port) which is
configured for LAN trunking. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.ro INTEGER .1.3.6.1.4.1.97.2.13.1.1.1 |
sxtrunkStateIf off(1) then this link has not been enabled for trunking.
If closed(2) then this link has not yet received any Trunking
PDUs. If oneway(3) then incoming Trunking PDUs do not indicate
that our PDUs are being successfully received by the far end.
If joined(4) then this link is actively participating in the
trunk group. If perturbed(5) then this link is actively
participating in the trunk group; however, the transmission of
data packets has been temporarily stopped due to a change in
membership of the group. If helddown(6) then an error has been
detected and the link is being held out-of-service until the error
clears. If broken(7) then this link has been configured for trunking,
but the port is physically non-operational.ro Enumeration .1.3.6.1.4.1.97.2.13.1.1.2 |
sxtrunkRemoteBridgeAddrThe MAC address portion of the bridge ID of the remote bridge.ro OCTET STRING .1.3.6.1.4.1.97.2.13.1.1.3 |
sxtrunkRemoteIpThe IP address of the remote bridge, as reported by that
bridge for administrative purposes.ro IpAddress .1.3.6.1.4.1.97.2.13.1.1.4 |
sxtrunkLastErrorThe last reason for failure when the link is in closed, oneway, or helddown state.ro Enumeration .1.3.6.1.4.1.97.2.13.1.1.5 |
sxtrunkLinkOrdinalThe position of this link within the trunk group.ro INTEGER .1.3.6.1.4.1.97.2.13.1.1.6 |
sxtrunkLinkCountThe number of links within the trunk group.ro INTEGER .1.3.6.1.4.1.97.2.13.1.1.7 |
sxtrunkLastChangeThe number of seconds since sxtrunkState changed.ro INTEGER .1.3.6.1.4.1.97.2.13.1.1.8 |
sxworkgroup OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.14 |
sxWorkGroupNextNumberThe next available workgroup number to be used. When creating
a new workgroup, it is recommended to read the value of the variable
and use it to key into the workgroup table.ro INTEGER .1.3.6.1.4.1.97.2.14.1 |
sxWorkGroupCurrentCountThe total number of workgroups currently defined.ro INTEGER .1.3.6.1.4.1.97.2.14.2 |
sxWorkGroupMaxCountThe maximum number of workgroups allowed.ro INTEGER .1.3.6.1.4.1.97.2.14.3 |
sxWorkGroupTableThis table contains work group definitions for the interfaces. SEQUENCE OF SxWorkGroupEntry .1.3.6.1.4.1.97.2.14.4 |
sxWorkGroupEntryEach entry in this table contains a definition of a work group. SxWorkGroupEntry .1.3.6.1.4.1.97.2.14.4.1 |
sxWorkGroupNumberAn integer that identifies the work group, used as an index
to this table.rw INTEGER .1.3.6.1.4.1.97.2.14.4.1.1 |
sxWorkGroupNameA 1-16 character work group name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.2.14.4.1.2 |
sxWorkGroupPortsA list of all ports within the group. The first
octet specified ports 1-8, the second 9-16, etc.rw OCTET STRING .1.3.6.1.4.1.97.2.14.4.1.3 |
sxWorkGroupTypeThe type of work group:
all - no additional information needs to be supplied.
ip - the IP network (and optionally, IP mask) must be supplied.
ipx - the IPX network number may be supplied, or else all IPX
network number will be assumed.rw Enumeration .1.3.6.1.4.1.97.2.14.4.1.4 |
sxWorkGroupIpAddressThe IP network address.rw IpAddress .1.3.6.1.4.1.97.2.14.4.1.5 |
sxWorkGroupIpMaskThe IP network mask, if set to 0, the default network mask is
applied.rw IpAddress .1.3.6.1.4.1.97.2.14.4.1.6 |
sxWorkGroupIpxNetworkThe IPX network number, 0 means all networks.rw OCTET STRING .1.3.6.1.4.1.97.2.14.4.1.7 |
sxtrapMgt OBJECT IDENTIFIER .1.3.6.1.4.1.97.2.15 |
sxtrapControlTableThis table contains information about the severity of each trap
and whether the trap is currently enable. SEQUENCE OF SxtrapControl .1.3.6.1.4.1.97.2.15.1 |
sxtrapControl SxtrapControl .1.3.6.1.4.1.97.2.15.1.1 |
sxtrapIndexThe specific trap number.ro INTEGER .1.3.6.1.4.1.97.2.15.1.1.1 |
sxtrapEnabledEnable or disable the generation of this trap.rw Enumeration .1.3.6.1.4.1.97.2.15.1.1.2 |
sxtrapSeverityA user-definable severity, indicating the importance of the
trap.rw Enumeration .1.3.6.1.4.1.97.2.15.1.1.3 |
sxtrapTextA description of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.2.15.1.1.4 |
sxtrapSeverityControlTableThis table contains information about whether a class of
traps of a particular severity are enabled or disabled. SEQUENCE OF SxtrapSeverityControl .1.3.6.1.4.1.97.2.15.2 |
sxtrapSeverityControl SxtrapSeverityControl .1.3.6.1.4.1.97.2.15.2.1 |
sxtrapSeverityControlSeverityA user-definable severity, indicating the importance of the
trap.rw Enumeration .1.3.6.1.4.1.97.2.15.2.1.1 |
sxtrapSeverityEnableEnable or disable all traps of a given severity level.rw Enumeration .1.3.6.1.4.1.97.2.15.2.1.2 |
sxtrapIncludeTextWhether or not a formatted text string is included in the trap
PDU.rw Enumeration .1.3.6.1.4.1.97.2.15.3 |
sxtrapTimeThe time, in centiseconds, which should expire between the sending
of traps.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.15.4 |
sxtrapRetryThe number of times any enterprise-specific trap is to be sent for
a given event. PDUs are retried using a truncated exponential backoff:
2 seconds, 4 seoncs, 8 seconds, 16 seconds, and then 32 seconds for
all succeeding intervals.rw INTEGER .1.3.6.1.4.1.97.2.15.5 |
sxtrapEntryNumberThe number of traps that are in the sxtrapTable.ro INTEGER .1.3.6.1.4.1.97.2.15.6 |
sxtrapTableThis table contains the latest traps that have been generated. SEQUENCE OF SxtrapEntry .1.3.6.1.4.1.97.2.15.7 |
sxtrapEntry SxtrapEntry .1.3.6.1.4.1.97.2.15.7.1 |
sxtrapEntryIndexA number representing the order in which the trap occurred
in time. This 32 bit number can wrap.ro INTEGER .1.3.6.1.4.1.97.2.15.7.1.1 |
sxtrapEntryTimeStampThe time at which the trap occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.2.15.7.1.2 |
sxtrapEntryTextA description of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.2.15.7.1.3 |
sxtrapNumberThe specific trap number, as specified in the TRAP PDU.ro INTEGER .1.3.6.1.4.1.97.2.15.7.1.4 |
sxtrapEntrySeverityA user-definable severity, indicating the importance of the
trap.ro Enumeration .1.3.6.1.4.1.97.2.15.7.1.5 |