FIREBRICK-CPU-MIB
The FIREBRICK-CPU-MIB module enables SNMP-based monitoring of real-time central processing unit utilization metrics on Firebrick network appliances. It provides specific counters and gauges for tracking CPU load percentages and system performance data to facilitate capacity planning and fault detection.
Imported Objects
Objects
9 total| Object Name |
|---|
fbCpuMibFirebrick CPU usage MODULE-IDENTITY .firebrickNewStyle.2 |
fbCpuUsageTableCPU usage for this Firebrick SEQUENCE OF FbCpuUsageEntry .firebrickNewStyle.2.1 |
fbCpuUsageEntryAn entry in the CPU usage table FbCpuUsageEntry .firebrickNewStyle.2.1.1 |
fbCpuIRQThe percentage of CPU time spent in interrupt processing for this period.
If period is 0 the instantaneous usage in the last second is used.
Units are 100ths of a percent, so 10000 indicates 100%.ro Gauge32 .firebrickNewStyle.2.1.1.1 |
fbCpuAllThe total percentage of CPU time spent non-idle for this period.
If period is 0 the instantaneous usage in the last second is used.
Units are 100ths of a percent, so 10000 indicates 100%.ro Gauge32 .firebrickNewStyle.2.1.1.2 |
fbCpuIRQPeakThe peak percentage of CPU time in interrupt processing during this period.
If period is 0 the peak usage in the current minute is used.
Units are 100ths of a percent, so 10000 indicates 100%.ro Gauge32 .firebrickNewStyle.2.1.1.3 |
fbCpuAllPeakThe peak percentage of CPU time non-idle during this period.
If period is 0 the peak usage in the current minute is used.
Units are 100ths of a percent, so 10000 indicates 100%.ro Gauge32 .firebrickNewStyle.2.1.1.4 |
fbCpuPeriodThe period in minutes covered by this table entry.
Zero indicates that an instantaneous value is required.
Max is 30 minutes. Integer32 .firebrickNewStyle.2.1.1.5 |
fbCpuCoreThe CPU core number covered by this table entry.
The numbering starts at 1, so CPU0 1, CPU1 is 2 etc. Integer32 .firebrickNewStyle.2.1.1.6 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module