FIBROLAN-MIB-DEVICECONVERTER
AI MIB Summary
The FIBROLAN-MIB-DEVICECONVERTER module enables SNMP-based monitoring and management of FibroLAN HCON1/MA and FCON1MA media converters, providing access to device status, interface statistics, and operational parameters for these specific hardware units.
The MIB module to describe FibroLAN HCON1/MA and FCON1MA converters. Copyright (C) Fibrolan Ltd (2008).
Main OID:
flConverter.1.3.6.1.4.1.4467.100.50.10
32
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
fibrolan OBJECT IDENTIFIER .1.3.6.1.4.1.4467 |
fibrolanSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100 |
flMaRemoteDevice OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50 |
flConverterThe MIB module to describe FibroLAN HCON1/MA and FCON1MA converters. Copyright (C) Fibrolan Ltd (2008). MODULE-IDENTITY .1.3.6.1.4.1.4467.100.50.10 |
flConverterMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.10.1 |
flConverterMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.10.1.1 |
flConverterMIBComplianceThe compliance statement for flMetroStar entities which implement the converters MIB. Unknown .1.3.6.1.4.1.4467.100.50.10.1.1.1 |
flConverterMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.10.1.2 |
flConverterDeviceGroupA collection of objects providing basic instrumentation of the MetroStar HCON/MA and FCON1/MA entity. Unknown .1.3.6.1.4.1.4467.100.50.10.1.2.1 |
flConverterChannelGroupA collection of objects providing extended instrumentation of the MetroStar HCON/MA and FCON1/MA entity. Unknown .1.3.6.1.4.1.4467.100.50.10.1.2.2 |
flConverterDevice OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.10.10 |
flConverterDeviceConfigTableThis table provides the device's general configuration SEQUENCE OF FlConverterDeviceConfigEntry .1.3.6.1.4.1.4467.100.50.10.10.1 |
flConverterDeviceConfigEntryThe entries of the table FlConverterDeviceConfigEntry .1.3.6.1.4.1.4467.100.50.10.10.1.1 |
flConverterDeviceResetReset devicerw Enumeration .1.3.6.1.4.1.4467.100.50.10.10.1.1.2 |
flConverterDeviceRestoreDefaultsRestore the device's defaults configurationrw Enumeration .1.3.6.1.4.1.4467.100.50.10.10.1.1.3 |
flConverterDeviceFirmRevisionThe device's Firmware revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4467.100.50.10.10.1.1.4 |
flConverterDeviceSerialNumberThe device's serial number (non supporting models will show N/Aro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4467.100.50.10.10.1.1.5 |
flConverterDeviceTemperatureDevice's temperature in degrees Celsius (for supporting devices)ro INTEGER .1.3.6.1.4.1.4467.100.50.10.10.1.1.6 |
flConverterChannel OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.10.20 |
flConverterChannelConfigTableThis table provides the channel's configuration SEQUENCE OF FlConverterChannelConfigEntry .1.3.6.1.4.1.4467.100.50.10.20.1 |
flConverterChannelConfigEntryThe entries of the channel table FlConverterChannelConfigEntry .1.3.6.1.4.1.4467.100.50.10.20.1.1 |
flConverterChannelConfigIndexTable indexro INTEGER .1.3.6.1.4.1.4467.100.50.10.20.1.1.1 |
flConverterTpLinkTP link statusro Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.2 |
flConverterFoLinkFO link statusro Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.3 |
flConverterPortDescriptionPort's textual description - up to 40 charactersrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4467.100.50.10.20.1.1.4 |
flConverterDuplexPort's Duplex moderw Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.5 |
flConverterTpAutoNegoPort's Auto-Negotiation moderw Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.6 |
flConverterTpDataratePort's data rate mode - 10/100Mbpsrw Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.7 |
flConverterUpstreamBwPort's upstream Bandwidthrw Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.8 |
flConverterEnableTpPortDisable/Enable TP portrw Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.9 |
flConverterPauseTurn Pause Mode on/offrw Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.10 |
flConverterFo2TpFpFO to TP Fp Moderw Enumeration .1.3.6.1.4.1.4467.100.50.10.20.1.1.11 |