FIBROLAN-MIB-GBECONVERTERS
AI MIB Summary
The FIBROLAN-MIB-GBECONVERTERS module enables SNMP-based monitoring and management of FibroLAN GSM1000/MA, GSM1010/MA, and GSM1000X Ethernet-to-Fiber converters, providing access to device status, port statistics, and link state metrics for these specific media conversion appliances.
The MIB module to describe FibroLAN GSM1000/MA, GSM1010/MA and GSM1000X converters. Copyright (C) Fibrolan Ltd (2010).
Main OID:
flGbeConverter.1.3.6.1.4.1.4467.100.50.30
71
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
fibrolan OBJECT IDENTIFIER .1.3.6.1.4.1.4467 |
fibrolanSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100 |
flMaRemoteDevice OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50 |
flGbeConverterThe MIB module to describe FibroLAN GSM1000/MA, GSM1010/MA and GSM1000X converters. Copyright (C) Fibrolan Ltd (2010). MODULE-IDENTITY .1.3.6.1.4.1.4467.100.50.30 |
flGbeConverterMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.30.1 |
flGbeConverterMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.30.1.1 |
flGbeConverterMIBComplianceThe compliance statement for flMetroStar entities which implement the GBE converters MIB. Unknown .1.3.6.1.4.1.4467.100.50.30.1.1.1 |
flGbeConverterMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.30.1.2 |
flGbeConverterDeviceGroupA collection of objects providing basic instrumentation of the MetroStar GSM1000MA/GSM1010MA/GSM1000X entity. Unknown .1.3.6.1.4.1.4467.100.50.30.1.2.1 |
flGbeConverterPortsGroupA collection of objects providing basic instrumentation of the MetroStar GSM1000MA/GSM1010MA/GSM1000X entity. Unknown .1.3.6.1.4.1.4467.100.50.30.1.2.2 |
flGbeConverterStatisticsGroupA collection of objects providing basic instrumentation of the MetroStar GSM1000MA/GSM1010MA/GSM1000X port statistic coounters entity. Unknown .1.3.6.1.4.1.4467.100.50.30.1.2.3 |
flGbeConverterDevice OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.30.10 |
flGbeConverterDeviceConfigTableThis table provides the device's global configuration SEQUENCE OF FlGbeConverterDeviceConfigEntry .1.3.6.1.4.1.4467.100.50.30.10.1 |
flGbeConverterDeviceConfigEntryThe entries of the table FlGbeConverterDeviceConfigEntry .1.3.6.1.4.1.4467.100.50.30.10.1.1 |
flGbeConverterRestoreDefaultsRestore the decive's defaults configurationsrw Enumeration .1.3.6.1.4.1.4467.100.50.30.10.1.1.2 |
flGbeConverterDeviceFirmRevisionThe device's Firmware revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4467.100.50.30.10.1.1.3 |
flGbeConverterDeviceTemperatureDevice temperaturero INTEGER .1.3.6.1.4.1.4467.100.50.30.10.1.1.4 |
flGbeConverterPorts OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.30.20 |
flGbeConverterPortConfigTableThis table provides the ports' basic configuration SEQUENCE OF FlGbeConverterPortConfigEntry .1.3.6.1.4.1.4467.100.50.30.20.1 |
flGbeConverterPortConfigEntryThe entries of the table FlGbeConverterPortConfigEntry .1.3.6.1.4.1.4467.100.50.30.20.1.1 |
flGbeConverterPortIndexTable index - port numberro INTEGER .1.3.6.1.4.1.4467.100.50.30.20.1.1.1 |
flGbeConverterP1LinkPort #1 (TP) link statusro Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.2 |
flGbeConverterP2LinkPort #2 (FO) link statusro Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.3 |
flGbeConverterPortDescriptionPort's textual description - up to 40 charactersrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4467.100.50.30.20.1.1.4 |
flGbeConverterP1SignalDetectPort #1 Signal detect statusro Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.5 |
flGbeConverterP2SignalDetectPort #2 (FO) Signal detect statusro Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.6 |
flGbeConverterChannelEnableChannel Enable/Disablerw Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.7 |
flGbeConverterP2LoopBackPort #2 (FO) loopback statusrw Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.8 |
flGbeConverterLstP1_P2Port#1->Port#2 (TP->FO) LST modero Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.9 |
flGbeConverterLstP2_P1Port#2->Port#1 (F0->TP) LST moderw Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.10 |
flGbeConverterUpstreamBWUpstream bandwidthrw INTEGER .1.3.6.1.4.1.4467.100.50.30.20.1.1.11 |
flGbeConverterP1LoopBackPort #1 (FO) loopback statusrw Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.12 |
flGbeConverterP1TypePort 1 SFP typero Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.13 |
flGbeConverterP2TypePort 2 SFP typero Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.14 |
flGbeConverterPauseChannel pauserw Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.15 |
flGbeConverterAutoNegoChannel auto-negotiationrw Enumeration .1.3.6.1.4.1.4467.100.50.30.20.1.1.16 |
flGbeConverterStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.4467.100.50.30.30 |
flGbeConverterStatisticsTableThis table provides the statistics for all ports. SEQUENCE OF FlGbeConverterStatisticsEntry .1.3.6.1.4.1.4467.100.50.30.30.1 |
flGbeConverterStatisticsEntryThe entries of the table FlGbeConverterStatisticsEntry .1.3.6.1.4.1.4467.100.50.30.30.1.1 |
flGbeConverterRxDropEventsCounts number of times a packet is dropped, because of lack of available resourcesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.1 |
flGbeConverterRxOctetsCounts the total number of octets (i.e. bytes) in any frames receivedro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.2 |
flGbeConverterRxPacketsCounts the number of frames received, good or badro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.3 |
flGbeConverterRxBroadcastPacketsCounts the number of good frames received and forwarded with broadcast address. Does not include non-broadcast multicast framesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.4 |
flGbeConverterRxMulticastPacketsCounts the number of good frames received and forwarded with multicast address. Does not include broadcast framesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.5 |
flGbeConverterRxCrcAlignmentErrorsCounts number of frames received with FCS or alignment errorsro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.6 |
flGbeConverterRxUndersizePacketsCounts number of frames received with size less than 64 bytesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.7 |
flGbeConverterRxOversizePacketsCounts number of frames received with size exceeding the maximum allowable frame sizero Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.8 |
flGbeConverterRxFragmentsCounts number of frames received with size less than 64 bytes and with bad FCSro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.9 |
flGbeConverterRxJabbersCounts number of frames received with size exceeding maximum frame size and with bad FCSro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.10 |
flGbeConverterRxCollisionsCounts number of collision events detectedro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.11 |
flGbeConverterRxPackets64OctetsCounts good packets with size = 64 bytesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.12 |
flGbeConverterRxPackets65to127OctetsCounts good packets with size from 65 bytes to 127 bytesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.13 |
flGbeConverterRxPackets128to255OctetsCounts good packets with size from 128 bytes to 255 bytesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.14 |
flGbeConverterRxPackets256to511OctetsCounts good packets with size from 256 bytes to 511 bytesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.15 |
flGbeConverterRxPackets512to1023OctetsCounts good packets with size from 512 bytes to 1023 bytesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.16 |
flGbeConverterRxPackets1024toMaxOctetsCounts good packets with size from 1024 bytes to max. frame sizero Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.17 |
flGbeConverterRxFibroLANProprietryFramesCounts number of FibroLAN's management proprietry frame receivedro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.18 |
flGbeConverterClearCountersClear the port's counters for this tablerw Enumeration .1.3.6.1.4.1.4467.100.50.30.30.1.1.19 |
flGbeConverterRxOctetsRateReceived octets (i.e. bytes) rate in bytes per secondro Counter64 UNITS "bytes/sec" .1.3.6.1.4.1.4467.100.50.30.30.1.1.20 |
flGbeConverterRxBitsRateReceived bits rate in bits per secondro Counter64 UNITS "bits/sec" .1.3.6.1.4.1.4467.100.50.30.30.1.1.21 |
flGbeConverterRxPacketsRateReceived packets (i.e frames) rate in frames per secondro Counter64 UNITS "frames/sec" .1.3.6.1.4.1.4467.100.50.30.30.1.1.22 |
flGbeConverterRxUtilizationReceived data utilization ratero DisplayString UNITS "%" .1.3.6.1.4.1.4467.100.50.30.30.1.1.23 |
flGbeConverterTxOctetsCounts the total number of octets (i.e. bytes) in any frames sentro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.24 |
flGbeConverterTxPacketsCounts the number of frames sent, good or badro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.25 |
flGbeConverterTxBroadcastPacketsCounts the number of good frames sent with broadcast address. Does not include non-broadcast multicast framesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.26 |
flGbeConverterTxMulticastPacketsCounts the number of good frames sent with multicast address. Does not include broadcast framesro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.27 |
flGbeConverterTxFibroLANProprietryFramesCounts number of FibroLAN's management proprietry frame sentro Counter64 .1.3.6.1.4.1.4467.100.50.30.30.1.1.28 |
flGbeConverterTxOctetsRateSent octets (i.e. bytes) rate in bytes per secondro Counter64 UNITS "bytes/sec" .1.3.6.1.4.1.4467.100.50.30.30.1.1.29 |
flGbeConverterTxBitsRateSent bits rate in bits per secondro Counter64 UNITS "bits/sec" .1.3.6.1.4.1.4467.100.50.30.30.1.1.30 |
flGbeConverterTxPacketsRateSent packets (i.e frames) rate in frames per secondro Counter64 UNITS "frames/sec" .1.3.6.1.4.1.4467.100.50.30.30.1.1.31 |
flGbeConverterTxUtilizationSent data utilization ratero DisplayString UNITS "%" .1.3.6.1.4.1.4467.100.50.30.30.1.1.32 |