FDDI-SMT73-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for FDDI-SMT73-MIB.
128
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
128 total| Object Name |
|---|
fddi OBJECT IDENTIFIER .1.3.6.1.2.1.10.15 |
RFC1213-MIB Unknown .1.3.6.1.2.1.10.15 |
fddimib OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.73 |
fddimibSMT OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.73.1 |
fddimibSMTNumberThe number of SMT implementations (regardless of
their current state) on this network management
application entity. The value for this variable
must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.73.1.1 |
fddimibSMTTableA list of SMT entries. The number of entries
shall not exceed the value of fddimibSMTNumber. SEQUENCE OF FddimibSMTEntry .1.3.6.1.2.1.10.15.73.1.2 |
fddimibSMTEntryAn SMT entry containing information common to a
given SMT. FddimibSMTEntry .1.3.6.1.2.1.10.15.73.1.2.1 |
fddimibSMTIndexA unique value for each SMT. The value for each
SMT must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.1 |
fddimibSMTStationIdUsed to uniquely identify an FDDI station.ro FddiSMTStationIdType -- OCTET STRING .1.3.6.1.2.1.10.15.73.1.2.1.2 |
fddimibSMTOpVersionIdThe version that this station is using for its
operation (refer to ANSI 7.1.2.2). The value of
this variable is 2 for this SMT revision.ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.3 |
fddimibSMTHiVersionIdThe highest version of SMT that this station
supports (refer to ANSI 7.1.2.2).ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.4 |
fddimibSMTLoVersionIdThe lowest version of SMT that this station
supports (refer to ANSI 7.1.2.2).ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.5 |
fddimibSMTUserDataThis variable contains 32 octets of user defined
information. The information shall be an ASCII
string.rw OCTET STRING .1.3.6.1.2.1.10.15.73.1.2.1.6 |
fddimibSMTMIBVersionIdThe version of the FDDI MIB of this station. The
value of this variable is 1 for this SMT
revision.ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.7 |
fddimibSMTMACCtsThe number of MACs in this station or
concentrator.ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.8 |
fddimibSMTNonMasterCtsThe value of this variable is the number of A, B,
and S ports in this station or concentrator.ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.9 |
fddimibSMTMasterCtsThe number of M Ports in a node. If the node is
not a concentrator, the value of the variable is
zero.ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.10 |
fddimibSMTAvailablePathsA value that indicates the PATH types available
in the station.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this node has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2
For example, a station having Primary and Local
PATHs available would have a value of 5 (2**0 +
2**2).ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.11 |
fddimibSMTConfigCapabilitiesA value that indicates the configuration
capabilities of a node. The 'Hold Available' bit
indicates the support of the optional Hold
Function, which is controlled by
fddiSMTConfigPolicy. The 'CF-Wrap-AB' bit
indicates that the station has the capability of
performing a wrap_ab (refer to ANSI SMT 9.7.2.2).
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
holdAvailable 0
CF-Wrap-AB 1ro INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.12 |
fddimibSMTConfigPolicyA value that indicates the configuration policies
currently desired in a node. 'Hold' is one of the
terms used for the Hold Flag, an optional ECM flag
used to enable the optional Hold policy.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
configurationhold 0rw INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.13 |
fddimibSMTConnectionPolicyA value representing the connection policies in
effect in a node. A station sets the corresponding
bit for each of the connection types that it
rejects. The letter designations, X and Y, in the
'rejectX-Y' names have the following significance:
X represents the PC-Type of the local PORT and Y
represents the PC_Type of the adjacent PORT
(PC_Neighbor). The evaluation of Connection-
Policy (PC-Type, PC-Neighbor) is done to determine
the setting of T- Val(3) in the PC-Signalling
sequence (refer to ANSI 9.6.3). Note that Bit 15,
(rejectM-M), is always set and cannot be cleared.
The value is a sum. This value initially takes
the value zero, then for each of the connection
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
rejectA-A 0
rejectA-B 1
rejectA-S 2
rejectA-M 3
rejectB-A 4
rejectB-B 5
rejectB-S 6
rejectB-M 7
rejectS-A 8
rejectS-B 9
rejectS-S 10
rejectS-M 11
rejectM-A 12
rejectM-B 13
rejectM-S 14
rejectM-M 15rw INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.14 |
fddimibSMTTNotifyThe timer, expressed in seconds, used in the
Neighbor Notification protocol. It has a range of
2 seconds to 30 seconds, and its default value is
30 seconds (refer to ANSI SMT 8.2).rw INTEGER .1.3.6.1.2.1.10.15.73.1.2.1.15 |
fddimibSMTStatRptPolicyIf true, indicates that the node will generate
Status Reporting Frames for its implemented events
and conditions. It has an initial value of true.
This variable determines the value of the
SR_Enable Flag (refer to ANSI SMT 8.3.2.1).rw Enumeration .1.3.6.1.2.1.10.15.73.1.2.1.16 |
fddimibSMTTraceMaxExpirationReference Trace_Max (refer to ANSI SMT
9.4.4.2.2).rw FddiTimeMilli .1.3.6.1.2.1.10.15.73.1.2.1.17 |
fddimibSMTBypassPresentA flag indicating if the station has a bypass on
its AB port pair.ro Enumeration .1.3.6.1.2.1.10.15.73.1.2.1.18 |
fddimibSMTECMStateIndicates the current state of the ECM state
machine (refer to ANSI SMT 9.5.2).ro Enumeration .1.3.6.1.2.1.10.15.73.1.2.1.19 |
fddimibSMTCFStateThe attachment configuration for the station or
concentrator (refer to ANSI SMT 9.7.2.2).ro Enumeration .1.3.6.1.2.1.10.15.73.1.2.1.20 |
fddimibSMTRemoteDisconnectFlagA flag indicating that the station was remotely
disconnected from the network as a result of
receiving an fddiSMTAction, disconnect (refer to
ANSI SMT 6.4.5.3) in a Parameter Management Frame.
A station requires a Connect Action to rejoin and
clear the flag (refer to ANSI SMT 6.4.5.2).ro Enumeration .1.3.6.1.2.1.10.15.73.1.2.1.21 |
fddimibSMTStationStatusThe current status of the primary and secondary
paths within this station.ro Enumeration .1.3.6.1.2.1.10.15.73.1.2.1.22 |
fddimibSMTPeerWrapFlagThis variable assumes the value of the
PeerWrapFlag in CFM (refer to ANSI SMT
9.7.2.4.4).ro Enumeration .1.3.6.1.2.1.10.15.73.1.2.1.23 |
fddimibSMTTimeStampThis variable assumes the value of TimeStamp
(refer to ANSI SMT 8.3.2.1).ro FddiTimeMilli .1.3.6.1.2.1.10.15.73.1.2.1.24 |
fddimibSMTTransitionTimeStampThis variable assumes the value of
TransitionTimeStamp (refer to ANSI SMT 8.3.2.1).ro FddiTimeMilli .1.3.6.1.2.1.10.15.73.1.2.1.25 |
fddimibSMTStationActionThis object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
other(1): Results in an appropriate error.
connect(2): Generates a Connect signal to ECM
to begin a connection sequence. See ANSI
Ref 9.4.2.
disconnect(3): Generates a Disconnect signal
to ECM. see ANSI Ref 9.4.2.
path-Test(4): Initiates a station Path_Test.
The Path_Test variable (see ANSI Ref
9.4.1) is set to 'Testing'. The results
of this action are not specified in this
standard.
self-Test(5): Initiates a station Self_Test.
The results of this action are not
specified in this standard.
disable-a(6): Causes a PC_Disable on the A
port if the A port mode is peer.
disable-b(7): Causes a PC_Disable on the B
port if the B port mode is peer.
disable-m(8): Causes a PC_Disable on all M
ports.
Attempts to set this object to all other values
results in an appropriate error. The result of
setting this variable to path-Test(4) or self-
Test(5) is implementation-specific.rw Enumeration .1.3.6.1.2.1.10.15.73.1.2.1.26 |
fddimibMAC OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.73.2 |
fddimibMACNumberThe total number of MAC implementations (across
all SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.73.2.1 |
fddimibMACTableA list of MAC entries. The number of entries
shall not exceed the value of fddimibMACNumber. SEQUENCE OF FddimibMACEntry .1.3.6.1.2.1.10.15.73.2.2 |
fddimibMACEntryA MAC entry containing information common to a
given MAC. FddimibMACEntry .1.3.6.1.2.1.10.15.73.2.2.1 |
fddimibMACSMTIndexThe value of the SMT index associated with this
MAC.ro INTEGER .1.3.6.1.2.1.10.15.73.2.2.1.1 |
fddimibMACIndexIndex variable for uniquely identifying the MAC
object instances, which is the same as the
corresponding resource index in SMT.ro INTEGER .1.3.6.1.2.1.10.15.73.2.2.1.2 |
fddimibMACIfIndexThe value of the MIB-II ifIndex corresponding to
this MAC. If none is applicable, 0 is returned.ro INTEGER .1.3.6.1.2.1.10.15.73.2.2.1.3 |
fddimibMACFrameStatusFunctionsIndicates the MAC's optional Frame Status
processing functions.
The value is a sum. This value initially takes
the value zero, then for each function present, 2
raised to a power is added to the sum. The powers
are according to the following table:
function Power
fs-repeating 0
fs-setting 1
fs-clearing 2ro INTEGER .1.3.6.1.2.1.10.15.73.2.2.1.4 |
fddimibMACTMaxCapabilityIndicates the maximum time value of fddiMACTMax
that this MAC can support.ro FddiTimeNano .1.3.6.1.2.1.10.15.73.2.2.1.5 |
fddimibMACTVXCapabilityIndicates the maximum time value of
fddiMACTvxValue that this MAC can support.ro FddiTimeNano .1.3.6.1.2.1.10.15.73.2.2.1.6 |
fddimibMACAvailablePathsIndicates the paths available for this MAC (refer
to ANSI SMT 9.7.7).
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this MAC has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2ro INTEGER .1.3.6.1.2.1.10.15.73.2.2.1.7 |
fddimibMACCurrentPathIndicates the Path into which this MAC is
currently inserted (refer to ANSI 9.7.7).ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.8 |
fddimibMACUpstreamNbrThe MAC's upstream neighbor's long individual MAC
address. It has an initial value of the SMT-
Unknown-MAC Address and is only modified as
specified by the Neighbor Information Frame
protocol (refer to ANSI SMT 7.2.1 and 8.2).ro FddiMACLongAddressType -- OCTET STRING .1.3.6.1.2.1.10.15.73.2.2.1.9 |
fddimibMACDownstreamNbrThe MAC's downstream neighbor's long individual
MAC address. It has an initial value of the SMT-
Unknown-MAC Address and is only modified as
specified by the Neighbor Information Frame
protocol (refer to ANSI SMT 7.2.1 and 8.2).ro FddiMACLongAddressType -- OCTET STRING .1.3.6.1.2.1.10.15.73.2.2.1.10 |
fddimibMACOldUpstreamNbrThe previous value of the MAC's upstream
neighbor's long individual MAC address. It has an
initial value of the SMT-Unknown- MAC Address and
is only modified as specified by the Neighbor
Information Frame protocol (refer to ANSI SMT
7.2.1 and 8.2).ro FddiMACLongAddressType -- OCTET STRING .1.3.6.1.2.1.10.15.73.2.2.1.11 |
fddimibMACOldDownstreamNbrThe previous value of the MAC's downstream
neighbor's long individual MAC address. It has an
initial value of the SMT- Unknown-MAC Address and
is only modified as specified by the Neighbor
Information Frame protocol (refer to ANSI SMT
7.2.1 and 8.2).ro FddiMACLongAddressType -- OCTET STRING .1.3.6.1.2.1.10.15.73.2.2.1.12 |
fddimibMACDupAddressTestThe Duplicate Address Test flag, Dup_Addr_Test
(refer to ANSI 8.2).ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.13 |
fddimibMACRequestedPathsList of permitted Paths which specifies the
Path(s) into which the MAC may be inserted (refer
to ansi SMT 9.7).
The value is a sum which represents the individual
paths that are desired. This value initially
takes the value zero, then for each type of PATH
that this node is, 2 raised to a power is added to
the sum. The powers are according to the
following table:
Path Power
local 0
secondary-alternate 1
primary-alternate 2
concatenated-alternate 3
secondary-preferred 4
primary-preferred 5
concatenated-preferred 6
thru 7rw INTEGER .1.3.6.1.2.1.10.15.73.2.2.1.14 |
fddimibMACDownstreamPORTTypeIndicates the PC-Type of the first port that is
downstream of this MAC (the exit port).ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.15 |
fddimibMACSMTAddressThe 48-bit individual address of the MAC used for
SMT frames.ro FddiMACLongAddressType -- OCTET STRING .1.3.6.1.2.1.10.15.73.2.2.1.16 |
fddimibMACTReqThis variable is the T_Req_value passed to the
MAC. Without having detected a duplicate, the
time value of this variable shall assume the
maximum supported time value which is less than or
equal to the time value of fddiPATHMaxT-Req. When
a MAC has an address detected as a duplicate, it
may use a time value for this variable greater
than the time value of fddiPATHTMaxLowerBound. A
station shall cause claim when the new T_Req may
cause the value of T_Neg to change in the claim
process, (i.e., time value new T_Req < T_Neg, or
old T_Req = T_Neg).ro FddiTimeNano .1.3.6.1.2.1.10.15.73.2.2.1.17 |
fddimibMACTNegIt is reported as a FddiTimeNano number.ro FddiTimeNano .1.3.6.1.2.1.10.15.73.2.2.1.18 |
fddimibMACTMaxThis variable is the T_Max_value passed to the
MAC. The time value of this variable shall assume
the minimum supported time value which is greater
than or equal to the time value of fddiPATHT-
MaxLowerBoundro FddiTimeNano .1.3.6.1.2.1.10.15.73.2.2.1.19 |
fddimibMACTvxValueThis variable is the TVX_value passed to the MAC.
The time value of this variable shall assume the
minimum supported time value which is greater than
or equal to the time value of
fddiPATHTVXLowerBound.ro FddiTimeNano .1.3.6.1.2.1.10.15.73.2.2.1.20 |
fddimibMACFrameCtsA count of the number of frames received by this
MAC (refer to ANSI MAC 7.5.1).ro Counter .1.3.6.1.2.1.10.15.73.2.2.1.21 |
fddimibMACCopiedCtsA count that should as closely as possible match
the number of frames addressed to (A bit set) and
successfully copied into the station's receive
buffers (C bit set) by this MAC (refer to ANSI MAC
7.5). Note that this count does not include MAC
frames.ro Counter .1.3.6.1.2.1.10.15.73.2.2.1.22 |
fddimibMACTransmitCtsA count that should as closely as possible match
the number of frames transmitted by this MAC
(refer to ANSI MAC 7.5). Note that this count
does not include MAC frames.ro Counter .1.3.6.1.2.1.10.15.73.2.2.1.23 |
fddimibMACErrorCtsA count of the number of frames that were
detected in error by this MAC that had not been
detected in error by another MAC (refer to ANSI
MAC 7.5.2).ro Counter .1.3.6.1.2.1.10.15.73.2.2.1.24 |
fddimibMACLostCtsA count of the number of instances that this MAC
detected a format error during frame reception
such that the frame was stripped (refer to ANSI
MAC 7.5.3).ro Counter .1.3.6.1.2.1.10.15.73.2.2.1.25 |
fddimibMACFrameErrorThresholdA threshold for determining when a MAC Condition
report (see ANSI 8.3.1.1) shall be generated.
Stations not supporting variable thresholds shall
have a value of 0 and a range of (0..0).rw INTEGER .1.3.6.1.2.1.10.15.73.2.2.1.26 |
fddimibMACFrameErrorRatioThis variable is the value of the ratio,
((delta fddiMACLostCts + delta fddiMACErrorCts) /
(delta fddiMACFrameCts + delta fddiMACLostCts ))
* 2**16ro INTEGER .1.3.6.1.2.1.10.15.73.2.2.1.27 |
fddimibMACRMTStateIndicates the current state of the RMT State
Machine (refer to ANSI 10.3.2).ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.28 |
fddimibMACDaFlagThe RMT flag Duplicate Address Flag, DA_Flag
(refer to ANSI 10.2.1.2).ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.29 |
fddimibMACUnaDaFlagA flag, UNDA_Flag (refer to ANSI 8.2.2.1), set
when the upstream neighbor reports a duplicate
address condition. Cleared when the condition
clears.ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.30 |
fddimibMACFrameErrorFlagIndicates the MAC Frame Error Condition is
present when set. Cleared when the condition
clears and on station initialization.ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.31 |
fddimibMACMAUnitdataAvailableThis variable shall take on the value of the
MAC_Avail flag defined in RMT.ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.32 |
fddimibMACHardwarePresentThis variable indicates the presence of
underlying hardware support for this MAC object.
If the value of this object is false(2), the
reporting of the objects in this entry may be
handled in an implementation-specific manner.ro Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.33 |
fddimibMACMAUnitdataEnableThis variable determines the value of the
MA_UNITDATA_Enable flag in RMT. The default and
initial value of this flag is true(1).rw Enumeration .1.3.6.1.2.1.10.15.73.2.2.1.34 |
fddimibMACCounters OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.73.3 |
fddimibMACCountersTableA list of MAC Counters entries. The number of
entries shall not exceed the value of
fddimibMACNumber. SEQUENCE OF FddimibMACCountersEntry .1.3.6.1.2.1.10.15.73.3.1 |
fddimibMACCountersEntryA MAC Counters entry containing information
common to a given MAC. FddimibMACCountersEntry .1.3.6.1.2.1.10.15.73.3.1.1 |
fddimibMACTokenCtsA count that should as closely as possible match
the number of times the station has received a
token (total of non-restricted and restricted) on
this MAC (see ANSI MAC 7.4). This count is
valuable for determination of network load.ro Counter .1.3.6.1.2.1.10.15.73.3.1.1.1 |
fddimibMACTvxExpiredCtsA count that should as closely as possible match
the number of times that TVX has expired.ro Counter .1.3.6.1.2.1.10.15.73.3.1.1.2 |
fddimibMACNotCopiedCtsA count that should as closely as possible match
the number of frames that were addressed to this
MAC but were not copied into its receive buffers
(see ANSI MAC 7.5). For example, this might occur
due to local buffer congestion. Because of
implementation considerations, this count may not
match the actual number of frames not copied. It
is not a requirement that this count be exact.
Note that this count does not include MAC frames.ro Counter .1.3.6.1.2.1.10.15.73.3.1.1.3 |
fddimibMACLateCtsA count that should as closely as possible match
the number of TRT expirations since this MAC was
reset or a token was received (refer to ANSI MAC
7.4.5).ro Counter .1.3.6.1.2.1.10.15.73.3.1.1.4 |
fddimibMACRingOpCtsThe count of the number of times the ring has
entered the 'Ring_Operational' state from the
'Ring Not Operational' state. This count is
updated when a SM_MA_STATUS.Indication of a change
in the Ring_Operational status occurs (refer to
ANSI 6.1.4). Because of implementation
considerations, this count may be less than the
actual RingOp_Ct. It is not a requirement that
this count be exact.ro Counter .1.3.6.1.2.1.10.15.73.3.1.1.5 |
fddimibMACNotCopiedRatioThis variable is the value of the ratio:
(delta fddiMACNotCopiedCts /
(delta fddiMACCopiedCts +
delta fddiMACNotCopiedCts )) * 2**16ro INTEGER .1.3.6.1.2.1.10.15.73.3.1.1.6 |
fddimibMACNotCopiedFlagIndicates that the Not Copied condition is
present when read as true(1). Set to false(2)
when the condition clears and on station
initialization.ro Enumeration .1.3.6.1.2.1.10.15.73.3.1.1.7 |
fddimibMACNotCopiedThresholdA threshold for determining when a MAC condition
report shall be generated. Stations not
supporting variable thresholds shall have a value
of 0 and a range of (0..0).rw INTEGER .1.3.6.1.2.1.10.15.73.3.1.1.8 |
fddimibPATH OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.73.4 |
fddimibPATHNumberThe total number of PATHs possible (across all
SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.73.4.1 |
fddimibPATHTableA list of PATH entries. The number of entries
shall not exceed the value of fddimibPATHNumber. SEQUENCE OF FddimibPATHEntry .1.3.6.1.2.1.10.15.73.4.2 |
fddimibPATHEntryA PATH entry containing information common to a
given PATH. FddimibPATHEntry .1.3.6.1.2.1.10.15.73.4.2.1 |
fddimibPATHSMTIndexThe value of the SMT index associated with this
PATH.ro INTEGER .1.3.6.1.2.1.10.15.73.4.2.1.1 |
fddimibPATHIndexIndex variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.ro INTEGER .1.3.6.1.2.1.10.15.73.4.2.1.2 |
fddimibPATHTVXLowerBoundSpecifies the minimum time value of
fddiMACTvxValue that shall be used by any MAC that
is configured in this path. The operational value
of fddiMACTvxValue is managed by setting this
variable. This variable has the time value range
of:
0 < fddimibPATHTVXLowerBound < fddimibPATHMaxTReq
Changes to this variable shall either satisfy the
time value relationship:
fddimibPATHTVXLowerBound <=
fddimibMACTVXCapability
of each of the MACs currently on the path, or be
considered out of range. The initial value of
fddimibPATHTVXLowerBound shall be 2500 nsec (2.5
ms).rw FddiTimeNano .1.3.6.1.2.1.10.15.73.4.2.1.3 |
fddimibPATHTMaxLowerBoundSpecifies the minimum time value of fddiMACTMax
that shall be used by any MAC that is configured
in this path. The operational value of
fddiMACTMax is managed by setting this variable.
This variable has the time value range of:
fddimibPATHMaxTReq <= fddimibPATHTMaxLowerBound
and an absolute time value range of:
10000nsec (10 msec) <= fddimibPATHTMaxLowerBound
Changes to this variable shall either satisfy the
time value relationship:
fddimibPATHTMaxLowerBound <
fddimibMACTMaxCapability
of each of the MACs currently on the path, or be
considered out of range. The initial value of
fddimibPATHTMaxLowerBound shall be 165000 nsec
(165 msec).rw FddiTimeNano .1.3.6.1.2.1.10.15.73.4.2.1.4 |
fddimibPATHMaxTReqSpecifies the maximum time value of fddiMACT-Req
that shall be used by any MAC that is configured
in this path. The operational value of fddiMACT-
Req is managed by setting this variable. This
variable has the time value range of:
fddimibPATHTVXLowerBound < fddimibPATHMaxTReq <=
fddimibPATHTMaxLowerBound.
The default value of fddimibPATHMaxTReq is 165000
nsec (165 msec).rw FddiTimeNano .1.3.6.1.2.1.10.15.73.4.2.1.5 |
fddimibPATHConfigTableA table of Path configuration entries. This
table lists all the resources that may be in this
Path. SEQUENCE OF FddimibPATHConfigEntry .1.3.6.1.2.1.10.15.73.4.3 |
fddimibPATHConfigEntryA collection of objects containing information
for a given PATH Configuration entry. FddimibPATHConfigEntry .1.3.6.1.2.1.10.15.73.4.3.1 |
fddimibPATHConfigSMTIndexThe value of the SMT index associated with this
configuration entry.ro INTEGER .1.3.6.1.2.1.10.15.73.4.3.1.1 |
fddimibPATHConfigPATHIndexThe value of the PATH resource index associated
with this configuration entry.ro INTEGER .1.3.6.1.2.1.10.15.73.4.3.1.2 |
fddimibPATHConfigTokenOrderAn object associated with Token order for this
entry. Thus if the token passes resources a, b, c
and d, in that order, then the value of this
object for these resources would be 1, 2, 3 and 4
respectively.ro INTEGER .1.3.6.1.2.1.10.15.73.4.3.1.3 |
fddimibPATHConfigResourceTypeThe type of resource associated with this
configuration entry.ro Enumeration .1.3.6.1.2.1.10.15.73.4.3.1.4 |
fddimibPATHConfigResourceIndexThe value of the SMT resource index used to refer
to the instance of this MAC or Port resource.ro INTEGER .1.3.6.1.2.1.10.15.73.4.3.1.5 |
fddimibPATHConfigCurrentPathThe current insertion status for this resource on
this Path.ro Enumeration .1.3.6.1.2.1.10.15.73.4.3.1.6 |
fddimibPORT OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.73.5 |
fddimibPORTNumberThe total number of PORT implementations (across
all SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.73.5.1 |
fddimibPORTTableA list of PORT entries. The number of entries
shall not exceed the value of fddimibPORTNumber. SEQUENCE OF FddimibPORTEntry .1.3.6.1.2.1.10.15.73.5.2 |
fddimibPORTEntryA PORT entry containing information common to a
given PORT. FddimibPORTEntry .1.3.6.1.2.1.10.15.73.5.2.1 |
fddimibPORTSMTIndexThe value of the SMT index associated with this
PORT.ro INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.1 |
fddimibPORTIndexA unique value for each PORT within a given SMT,
which is the same as the corresponding resource
index in SMT. The value for each PORT must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.2 |
fddimibPORTMyTypeThe value of the PORT's PC_Type (refer to ANSI
9.4.1, and 9.6.3.2).ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.3 |
fddimibPORTNeighborTypeThe type of the remote PORT as determined in PCM.
This variable has an initial value of none, and is
only modified in PC_RCode(3)_Actions (refer to
ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.4 |
fddimibPORTConnectionPoliciesA value representing the PORT's connection
policies desired in the node. The value of pc-
mac-lct is a term used in the PC_MAC_LCT Flag (see
9.4.3.2). The value of pc-mac-loop is a term used
in the PC_MAC_Loop Flag.
The value is a sum. This value initially takes
the value zero, then for each PORT policy, 2
raised to a power is added to the sum. The powers
are according to the following table:
Policy Power
pc-mac-lct 0
pc-mac-loop 1rw INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.5 |
fddimibPORTMACIndicatedThe indications (T_Val(9), R_Val(9)) in PC-
Signalling, of the intent to place a MAC in the
output token path to a PORT (refer to ANSI SMT
9.6.3.2.).ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.6 |
fddimibPORTCurrentPathIndicates the Path(s) into which this PORT is
currently inserted.ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.7 |
fddimibPORTRequestedPathsThis variable is a list of permitted Paths where
each list element defines the Port's permitted
Paths. The first octet corresponds to 'none', the
second octet to 'tree', and the third octet to
'peer'.rw OCTET STRING .1.3.6.1.2.1.10.15.73.5.2.1.8 |
fddimibPORTMACPlacementIndicates the MAC, if any, whose transmit path
exits the station via this PORT. The value shall
be zero if there is no MAC associated with the
PORT. Otherwise, the MACIndex of the MAC will be
the value of the variable.ro FddiResourceId -- INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.9 |
fddimibPORTAvailablePathsIndicates the Paths which are available to this
Port. In the absence of faults, the A and B Ports
will always have both the Primary and Secondary
Paths available.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this port has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2ro INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.10 |
fddimibPORTPMDClassThis variable indicates the type of PMD entity
associated with this port.ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.11 |
fddimibPORTConnectionCapabilitiesA value that indicates the connection
capabilities of the port. The pc-mac-lct bit
indicates that the station has the capability of
setting the PC_MAC_LCT Flag. The pc-mac-loop bit
indicates that the station has the capability of
setting the PC_MAC_Loop Flag (refer to ANSI
9.4.3.2).
The value is a sum. This value initially takes
the value zero, then for each capability that this
port has, 2 raised to a power is added to the sum.
The powers are according to the following table:
capability Power
pc-mac-lct 0
pc-mac-loop 1ro INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.12 |
fddimibPORTBSFlagThis variable assumes the value of the BS_Flag
(refer to ANSI SMT 9.4.3.3).ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.13 |
fddimibPORTLCTFailCtsThe count of the consecutive times the link
confidence test (LCT) has failed during connection
management (refer to ANSI 9.4.1).ro Counter .1.3.6.1.2.1.10.15.73.5.2.1.14 |
fddimibPORTLerEstimateA long term average link error rate. It ranges
from 10**-4 to 10**-15 and is reported as the
absolute value of the base 10 logarithm (refer to
ANSI SMT 9.4.7.5.).ro INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.15 |
fddimibPORTLemRejectCtsA link error monitoring count of the times that a
link has been rejected.ro Counter .1.3.6.1.2.1.10.15.73.5.2.1.16 |
fddimibPORTLemCtsThe aggregate link error monitor error count, set
to zero only on station initialization.ro Counter .1.3.6.1.2.1.10.15.73.5.2.1.17 |
fddimibPORTLerCutoffThe link error rate estimate at which a link
connection will be broken. It ranges from 10**-4
to 10**-15 and is reported as the absolute value
of the base 10 logarithm (default of 7).rw INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.18 |
fddimibPORTLerAlarmThe link error rate estimate at which a link
connection will generate an alarm. It ranges from
10**-4 to 10**-15 and is reported as the absolute
value of the base 10 logarithm of the estimate
(default of 8).rw INTEGER .1.3.6.1.2.1.10.15.73.5.2.1.19 |
fddimibPORTConnectStateAn indication of the connect state of this PORT
and is equal to the value of Connect_State (refer
to ANSI 9.4.1)ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.20 |
fddimibPORTPCMStateThe state of this Port's PCM state machine refer
to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.21 |
fddimibPORTPCWithholdThe value of PC_Withhold (refer to ANSI SMT
9.4.1).ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.22 |
fddimibPORTLerFlagThe condition becomes active when the value of
fddiPORTLerEstimate is less than or equal to
fddiPORTLerAlarm. This will be reported with the
Status Report Frames (SRF) (refer to ANSI SMT
7.2.7 and 8.3).ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.23 |
fddimibPORTHardwarePresentThis variable indicates the presence of
underlying hardware support for this Port object.
If the value of this object is false(2), the
reporting of the objects in this entry may be
handled in an implementation-specific manner.ro Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.24 |
fddimibPORTActionCauses a Control signal to be generated with a
control_action of 'Signal' and the 'variable'
parameter set with the appropriate value (i.e.,
PC_Maint, PC_Enable, PC_Disable, PC_Start, or
PC_Stop) (refer to ANSI 9.4.2).rw Enumeration .1.3.6.1.2.1.10.15.73.5.2.1.25 |