FD-SYSTEM-MIB
system mib module
Main OID:
systemInfo.1.3.6.1.4.1.34592.1.3.1
89
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
systemInfosystem mib module MODULE-IDENTITY .1.3.6.1.4.1.34592.1.3.1 |
sysBaseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.1 |
sysModelOLT platform system modelro DeviceType (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.1.1 |
sysDescUsed for system manager to give a brief system description informationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.1.2 |
sysLocationUsed for system manager to input the device(olt platform) location informationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.1.3 |
sysContactsystem manager contact informationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.1.4 |
sysMajAlarmLedStatus of main card MAJ ledro LedStatus (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.1.5 |
sysCriAlarmLedStatus of main card CRJ ledro LedStatus (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.1.6 |
sysAlarmDescMeaning of MAJ and CRI alarm leds. Normally, you can get alarm meaning
from this object when one of or both the MAJ and CRI alarm leds are lipro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.1.7 |
sysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.2 |
consolePortSpdMain card CONSOLE port access speedro Enumeration .1.3.6.1.4.1.34592.1.3.1.2.1 |
manageIpAddrThe IP Address of outband network management portrw IpAddress .1.3.6.1.4.1.34592.1.3.1.2.2 |
manageNetMaskThe network mask of outband network management portrw IpAddress .1.3.6.1.4.1.34592.1.3.1.2.3 |
manageGatewayThe Default Gateway Address of outband network management portrw IpAddress .1.3.6.1.4.1.34592.1.3.1.2.4 |
snmpReadCommunityThe read-only community used on the embedded snmp agentrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.2.5 |
snmpRWCommunityThe read-write community used on the embedded snmp agentrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.2.6 |
trapDstIpAddr1The first destination IP Address to which the system trap will sendrw IpAddress .1.3.6.1.4.1.34592.1.3.1.2.8 |
trapDstIpAddr2The second destination IP Address to which the system trap will sendrw IpAddress .1.3.6.1.4.1.34592.1.3.1.2.9 |
trapDstIpAddr3The third destination IP Address to which the system trap will sendrw IpAddress .1.3.6.1.4.1.34592.1.3.1.2.10 |
trapDstIpAddr4The fourth destination IP Address to which the system trap will sendrw IpAddress .1.3.6.1.4.1.34592.1.3.1.2.11 |
sysOperateSet the value of this object to 'save(1)' to save all system configurations.
Return 'noOperation(2)' when read. Set the value to 'noOperation(2)'will take
nothing effectrw DeviceOperation (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.2.12 |
chassisInfo OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.3 |
chassisTypetype of the olt platform chassisro DeviceType (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.3.1 |
chassisFactorySerialDescription. Chassis factory serial,reserved for future use.ro OCTET STRING .1.3.6.1.4.1.34592.1.3.1.3.2 |
chassisRevisionDescription.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.3.3 |
chassisTemperaturechassis temperaturero Unsigned32 .1.3.6.1.4.1.34592.1.3.1.3.4 |
powerStatusBitPower status bit masks;
value & 1 == 1 indicating power A on else off
value & 2 == 2 indicating power B on else offro Unsigned32 .1.3.6.1.4.1.34592.1.3.1.3.5 |
fanStatusBitFan stauts bit masks
value & 1 == 1 indicating fan 1 on else off
value & 2 == 2 indicating fan 2 on else off
value & 4 == 4 indicating fan 3 on else off
value & 8 == 8 indicating fan 4 on else offro Unsigned32 .1.3.6.1.4.1.34592.1.3.1.3.6 |
cardModule OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.5 |
mainCard OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.5.1 |
mainCardTypetype of main card (it is also called control and switch card)ro DeviceType (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.5.1.1 |
mainCardFactorySerialDescription. Main card factory serial, reserved for future usero OCTET STRING .1.3.6.1.4.1.34592.1.3.1.5.1.2 |
mainCardHWRevisionmain card hardware revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.5.1.3 |
mainCardSWVersionsoftware version running on main cardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.5.1.4 |
mainCardRunningStatusThe running status of main card, it can only be normal or abnormal,
since the main card is always onlinero DeviceStatus (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.5.1.5 |
mainCardRunningTimeThe running time since the main card was last poweredro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.34592.1.3.1.5.1.6 |
mainCardOperateThe operation collection, such as reset, restore...rw DeviceOperation (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.5.1.7 |
ponCard OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.5.2 |
ponCardTableThis table defines base para objects of PON cards installed in the chassis SEQUENCE OF PonCardEntry .1.3.6.1.4.1.34592.1.3.1.5.2.1 |
ponCardEntryEach entry defines a sole PON card objects PonCardEntry .1.3.6.1.4.1.34592.1.3.1.5.2.1.1 |
ponCardSlotIdPON card slot index, defined begin from 1 to max slot number Integer32 .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.1 |
ponCardTypePON card type valuero DeviceType (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.2 |
ponCardFactorySerialDescription. PON card factory serial, reserved for future usero OCTET STRING .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.3 |
ponCardHwRevPON card hardware revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.4 |
ponCardFwVerPON card software versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.5 |
ponCardRunningStatuspon card on-line status, each pon card may have following
status:
not installed (present)
installed but can not be connected by main card
installed and can be connected by main cardro DeviceStatus (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.7 |
ponCardRuningTimeThe running time since the pon card last poweredro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.8 |
ponCardOperateOperate action taken on PON cardrw DeviceOperation (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.9 |
ponCardUpgradeStatDescription.ro Enumeration .1.3.6.1.4.1.34592.1.3.1.5.2.1.1.10 |
onuAuth OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.6 |
authMethodWhich method that the manager will take to authenticate accessed ONUs,
When set to blackList, the OLT will allow only the ONUs that their MAC
is not included in the black MAC table.
When set to whiteList,the OLT will allow only the ONUs that their MAC
is included in the white MAC table.rw Enumeration .1.3.6.1.4.1.34592.1.3.1.6.1 |
nonAuthOperONU MAC Authentication operation object, now, it can only
be used to clear the MAC list which had tried to register
but had not been authenticatedrw Enumeration .1.3.6.1.4.1.34592.1.3.1.6.2 |
onuAuthMacCfgTableMAC list table which contain the ONU MAC address list, these MAC address will
be used to authenticate accessed ONUs. SEQUENCE OF OnuAuthMacCfgEntry .1.3.6.1.4.1.34592.1.3.1.6.3 |
onuAuthMacCfgEntryEach entry in this table defines a sole MAC (when the beginMAC is equal
to the endMAC or the endMAC is blank/zero) or a MAC range. OnuAuthMacCfgEntry .1.3.6.1.4.1.34592.1.3.1.6.3.1 |
authMacEntryIdDescription. entry serial ID, which used to identify an entry uniquely Unsigned32 .1.3.6.1.4.1.34592.1.3.1.6.3.1.1 |
beginMacAddrbegin MAC address, this object must be set to effect this entryrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.6.3.1.2 |
endMacAddrEnd MAC address of a MAC range entry. Set this value to zero will result
that this entry only indicate a unique MAC.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.6.3.1.3 |
macAttrThis object is used to decide that the MAC(s) introduced in this entry
should be classified into blackList or whiteList.
When set to 'obsolete', this entry is not in use. This option is reserved
for future use.rw Enumeration .1.3.6.1.4.1.34592.1.3.1.6.3.1.4 |
onuAuthMacRowStatusThis object is used to create or delete a MAC entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.6.3.1.5 |
nonAuthOnuListTableThis table contain illegal ONU MAC list which try to register
on OLT SEQUENCE OF NonAuthOnuListEntry .1.3.6.1.4.1.34592.1.3.1.6.4 |
nonAuthOnuListEntryEach entry in this table contain a nonAuth onu MAC info NonAuthOnuListEntry .1.3.6.1.4.1.34592.1.3.1.6.4.1 |
nonAuthOnuMacIndexAdministrativly assigned entry index Unsigned32 .1.3.6.1.4.1.34592.1.3.1.6.4.1.1 |
nonAuthOnuMacThe MAC address which tried to registerro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.6.4.1.2 |
nonAuthOnuTriesThe times that the illegal ONU try to registerro Unsigned32 .1.3.6.1.4.1.34592.1.3.1.6.4.1.3 |
userManage OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.7 |
userManageTableDescription. Access user management table. The table defined
the users who can access the system shell management interface,
including local CLI and remote telnet access.
The users defined in this table is independent with those
defined in EMS. SEQUENCE OF UserManageEntry .1.3.6.1.4.1.34592.1.3.1.7.1 |
userManageEntryDescription. One entry contains one user attributes, up to 5
entries can be created in this table. UserManageEntry .1.3.6.1.4.1.34592.1.3.1.7.1.1 |
userIdAdministrativly assigned entry index Integer32 .1.3.6.1.4.1.34592.1.3.1.7.1.1.1 |
userNameuser namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.7.1.1.2 |
userPassworduser passwordrw OCTET STRING .1.3.6.1.4.1.34592.1.3.1.7.1.1.3 |
userPermissionDescription. This object define the user priority and other
permission attributesro Unsigned32 .1.3.6.1.4.1.34592.1.3.1.7.1.1.4 |
userAccessDeviceMapThis object is defined for future use.
It is a bit map value which defines which devices in the system
can be accessed by a user.
Temporary definitions:
|sys level | swithch module | olt module| onu |............
high 2b 2b 5b 7b reserved low
when the map bit set to 1, the user can access the corresponding device
otherwise can notrw Unsigned32 .1.3.6.1.4.1.34592.1.3.1.7.1.1.5 |
loginTimeoutDescription. Time out time since one accessed user last operation,
when this time elapse, the user will be kicked offro Unsigned32 .1.3.6.1.4.1.34592.1.3.1.7.1.1.6 |
userEntryRowStatusUse this object to create or delete a user inforw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.1.7.1.1.7 |
upgrade OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.8 |
ftpServerIpThe host IP Address on which FTP server running and this
host will be used as the server to do FTP operationrw DisplayString .1.3.6.1.4.1.34592.1.3.1.8.1 |
ftpServerUserNameThe user name used to access ftp serverrw DisplayString .1.3.6.1.4.1.34592.1.3.1.8.2 |
ftpServerUserPasswdThe user password which will be used to access ftp serverrw DisplayString .1.3.6.1.4.1.34592.1.3.1.8.3 |
ftpOperFileNameThe file name which will be download to or upload from
device. When the operation is download, the operation
file should located on the host; When the operation is
upload the file should located on the target device;rw DisplayString .1.3.6.1.4.1.34592.1.3.1.8.4 |
ftpOperTargetThe operate target, which are device firmware or configuration
file.
When do upgrade or download,one of these file targets
should be selected to operate.
ctrlCardImage(1),
ponCardImage(2),
oltApp(3),
oltPers(4),
oltBoot(5),
onuApp(6),
onuPers(7),
onuBoot(8),
otherSpecifiedFile(9)rw Enumeration .1.3.6.1.4.1.34592.1.3.1.8.6 |
dwLoadFileCrcCheckThis object is used to indicate the target device
should or not to do crc check operation,if 'checkCrc'
the operator should give the download file's crc
calculate result on the 'dwLoadFileCrcValue' object.
Crc check is now only useful when do download
operation.rw Enumeration .1.3.6.1.4.1.34592.1.3.1.8.7 |
dwLoadFileCrcValueCRC value of the download file, this value will be used to
compare with the CRC result calculated by the firmware running
on device to check if error occurred during file transmissionrw Unsigned32 .1.3.6.1.4.1.34592.1.3.1.8.8 |
operDeviceMapThis object defines the upgrade or download device objects,when do upgrade operation
one or more device can be selected as operate objects. The data format defined as
following:
-
| slot | olt | onu |
-
1byte 1byte 8byte
All these 10 bytes used as bit map for device selecting, when selected set the
according bit to 1, else set to 0
The bit sequence in each used from low to high:
For example:
slot:0000 0101, select slot 1 and 3, dont select slot 2 and 4 and others(reserved)
olt: 0000 0011 select olt(pon port) 1 and 2, dont select others(reserved)
onu: byte[0] map to onuId 1~8; byte[1] map to onuId 9~16,...,
byte[7] map to onuId 56~63
Bit map in byte[0]: b0~b7 map to onuId1~onuId8, etc.rw OCTET STRING .1.3.6.1.4.1.34592.1.3.1.8.9 |
upgradeStatusUpgrade process statusro Enumeration .1.3.6.1.4.1.34592.1.3.1.8.10 |
upgradeOperationThis object defines an operation collection, which are
used to do downlaod,upgrade or get file(upload) operations.rw Enumeration .1.3.6.1.4.1.34592.1.3.1.8.11 |
ftpProgressDescription.ro Integer32 UNITS "percent" .1.3.6.1.4.1.34592.1.3.1.8.12 |
fdSysConformance OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.13 |
fdSystemGroups OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.13.1 |
fdSystemCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.1.13.2 |