FD-OLT-MIB
AI MIB Summary
The FD-OLT-MIB module facilitates the monitoring and management of Fiber Distribution Point (OLT) hardware, specifically tracking optical line terminal status, PON port states, optical power levels, and active subscriber session counts. It enables network operators to retrieve performance metrics and fault alarms for GPON/EPON interfaces to ensure service delivery integrity within the access network.
OLT mib module
Main OID:
fdOlt.1.3.6.1.4.1.34592.1.3.3
192
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
192 total| Object Name |
|---|
fdOltOLT mib module MODULE-IDENTITY .1.3.6.1.4.1.34592.1.3.3 |
oltBaseManageTableOLT base management information table SEQUENCE OF OltBaseManageEntry .1.3.6.1.4.1.34592.1.3.3.1 |
oltBaseManageEntryEach entry in this table contain the info for one OLT (
that is also called one PON port) OltBaseManageEntry .1.3.6.1.4.1.34592.1.3.3.1.1 |
oltIdAdministratorly assigned identifier value Integer32 .1.3.6.1.4.1.34592.1.3.3.1.1.1 |
oltMacAddrOLT MAC addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.1.1.2 |
oltWorkStatework status of the OLTro DeviceStatus (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.1.1.3 |
oltEnableThis object is used to enable or disable the OLT.
When enabled, the olt will pass user traffic;
When disabled,the olt will turning off the EPON port
and blocking all traffic in both directionsrw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.1.1.4 |
maxPermitLLIDNumberLLID number that the olt allow to register, this value can only
be changed when the olt is disabled.rw Unsigned32 .1.3.6.1.4.1.34592.1.3.3.1.1.5 |
registeredLLIDNumberLLID number that registered now on this OLTro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.1.1.6 |
accessedOnuNumberThe accessed physical ONU number, 'physical' is opposite to
'dummy', a 'Logical Link' is also called a dummy ONU to the OLTro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.1.1.7 |
linkIdExhaustIndicate if there is available linkId which can be allocated
to new registered Logical Linkro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.1.1.8 |
onuIdExhaustRefer to linkIdExhaust descro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.1.1.9 |
linkIdOverWriteDescription. This object is used to config linkId overwrite
operation. LinkId is system resource managed by PON card
firmware and used to identify each Logical Link.
When a new Link register, a LinkId will be assigned.
When the registered Link off-line or de-register,the
assigned LinkId will still be reserved. Such a policy
will lead a result that is the allowed linkId resource
exhaust. When this occurred, the device manager can have
two choices, delete the off-line linkId entry manually
or permit the device firmware itself to overwrite the
oldest assigned linkId by seting the value of this object
to 'yes'.
Generally, the choice will be made based on if the user
care the off-line Links' configurations and status. If don't
care, set this value to 'yes' will be a better choice.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.1.1.10 |
onuIdOverWriteRefer to 'linkIdOverWrite' descriptionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.1.1.11 |
oltOperateThis object define a collection of operate actions which
can be apply on olt devicerw DeviceOperation (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.1.1.20 |
oltUpgradeStatDescription.ro Enumeration .1.3.6.1.4.1.34592.1.3.3.1.1.21 |
onuMgmtDefTypeDescription.rw Enumeration .1.3.6.1.4.1.34592.1.3.3.1.1.22 |
oltAdvancedManage OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.4 |
oltChipInfoTableDescription. reserved, may or may not support SEQUENCE OF OltChipInfoEntry .1.3.6.1.4.1.34592.1.3.3.4.1 |
oltChipInfoEntryEach entry in this table contain an olt info OltChipInfoEntry .1.3.6.1.4.1.34592.1.3.3.4.1.1 |
oltChipProCodeDescription. olt chip product codero Unsigned32 .1.3.6.1.4.1.34592.1.3.3.4.1.1.1 |
oltChipVerDescription.olt chip versionro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.4.1.1.2 |
oltChipFirmVerDescription.olt chip frimware versionro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.4.1.1.3 |
oltChipBootVerolt chip boot firmware versionro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.4.1.1.4 |
oltChipPersVerolt chip's personality file versionro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.4.1.1.5 |
oltChipApp0Verolt chip application file versionro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.4.1.1.6 |
oltChipApp1Verolt chip application file versionro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.4.1.1.7 |
oltChipDiagVerolt chip diagnostic file versionro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.4.1.1.8 |
oltOamRateTableolt oam rate configurations SEQUENCE OF OltOamRateEntry .1.3.6.1.4.1.34592.1.3.3.4.2 |
oltOamRateEntryEach entry in this table contain configurations for each OLT OltOamRateEntry .1.3.6.1.4.1.34592.1.3.3.4.2.1 |
minOamRateDescription. Reserved, EMS may not be supportrw Integer32 .1.3.6.1.4.1.34592.1.3.3.4.2.1.1 |
maxOamRateDescription. Reserved, EMS may not be supportrw Integer32 .1.3.6.1.4.1.34592.1.3.3.4.2.1.2 |
oamRspTimeoutDescription. Reserved, EMS may not be supportrw Integer32 .1.3.6.1.4.1.34592.1.3.3.4.2.1.3 |
discoveryParaTableDescription. Reserved.
ONU discovery process parameters. These parameters are
associated with the transmit distance SEQUENCE OF DiscoveryParaEntry .1.3.6.1.4.1.34592.1.3.3.4.3 |
discoveryParaEntryEach entry in this table contain configurations for each OLT DiscoveryParaEntry .1.3.6.1.4.1.34592.1.3.3.4.3.1 |
discoverPeriodDiscovery process parametersrw Integer32 .1.3.6.1.4.1.34592.1.3.3.4.3.1.1 |
discoverWindowDiscovery process parametersrw Integer32 .1.3.6.1.4.1.34592.1.3.3.4.3.1.2 |
discoverTimeoutValDiscovery process parametersrw Integer32 .1.3.6.1.4.1.34592.1.3.3.4.3.1.3 |
oltAdvancedConfigTableThis table contain the information which is not normally
used but may be usefull in some special circumstance SEQUENCE OF OltAdvancedConfigEntry .1.3.6.1.4.1.34592.1.3.3.4.4 |
oltAdvancedConfigEntryEach entry in this table contain the information for one OLT OltAdvancedConfigEntry .1.3.6.1.4.1.34592.1.3.3.4.4.1 |
oltAddiVlanEthTypeAdditional Ethernet type to identify vlan frames.
0 1 2 3
-
vlan EthType| tag upstream | tag downstream |
-
2byte 1byte 1byte
vlan EthType: default 0x8100
tag upstream: 1->use this type to tag upstream, 0->untag
tag downstream: 1->use this type to tag downstream, 0->untagrw OCTET STRING .1.3.6.1.4.1.34592.1.3.3.4.4.1.1 |
onuUltraLongDistanceTransDescription.Reserved.
This object is used for enable the ultra-long distance
transmission of PON.
Normally, this object should not be changed, the disable
allowwed transmit distance is 20KM for PON standard.
But,if some user want it transmit more longer than standard
for some special case, he can set this value to true.
When change this configuration, several parameters should be
changed internally. Detail operations will not be descripted
here.rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.4.4.1.2 |
oltBroadCastRateCtlDescription.rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.4.4.1.3 |
oltMultiCastRateCtlDescription.rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.4.4.1.4 |
oltUnkUcCastRateCtlDescription.rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.4.4.1.5 |
oltBroadCastRateDescription.rw Integer32 .1.3.6.1.4.1.34592.1.3.3.4.4.1.6 |
oltBridgeConfigTable SEQUENCE OF OltBridgeConfigEntry .1.3.6.1.4.1.34592.1.3.3.5 |
oltBridgeConfigEntry OltBridgeConfigEntry .1.3.6.1.4.1.34592.1.3.3.5.1 |
dynMacAgeTimeOLT Mac leared entry age limit, the value unit is '1s'. Set
this value to 0 will disable mac age featurerw Integer32 .1.3.6.1.4.1.34592.1.3.3.5.1.1 |
downStreamResetAgeTimerGenerally, only when olt receive learned mac from upstream (from PON port)
will reset the age timer. This object give us an option to let olt reset
age timer when received learned mac from downstream (from OLT's SNI port).rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.5.1.2 |
bridgedVlanNumberbriged vlan numberro Integer32 .1.3.6.1.4.1.34592.1.3.3.5.1.3 |
macOverWritewhen enable, the new coming MAC will overwrite the oldest learned
MAC when the per-link learning buf is full; when disable, the frame
with new mac will be dropped when the learning buf is full.rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.5.1.4 |
discardUnknownMacDiscard unknown MAC, set to enable will cause the OLT to drop downstream
frames with unknown (not learned) DAsrw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.5.1.5 |
forwardTagOnSimpleBridgeSet the object to 'allow' will permit the OLT to forward tagged frames
on simple bridge links. Set to 'disallow' will not permit the OLT
to forward tagged frames on simple bridges.rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.5.1.6 |
dba OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.6 |
linkLevelSizeTableThis table contains the configurations that the logical
links which can register on each priority level SEQUENCE OF LinkLevelSizeEntry .1.3.6.1.4.1.34592.1.3.3.6.1 |
linkLevelSizeEntryEach entry indicate an onu LinkLevelSizeEntry .1.3.6.1.4.1.34592.1.3.3.6.1.1 |
level0LinksPriority level 0 link numbers that the olt will allow to register.
Priority level 0 is 'min bw=max bw and the delay is sensitive'
this object can only be changed when the olt is diablerw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.1.1.1 |
level1LinksPriority level 1 link numbers that the olt will allow to register.
Priority level 1 is 'min bw!=0'
this object can only be changed when the olt is diablerw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.1.1.2 |
level2LinksPriority level 2 link numbers that the olt will allow to register.
Priority level 2 is 'min bw=0'
this object can only be changed when the olt is diablerw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.1.1.3 |
nonDbaLinksTDM level link numbers that the olt will allow to register.
this object can only be changed when the olt is diablerw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.1.1.4 |
dbaDropDownWeightTableDBA drop down weight configuration table SEQUENCE OF DbaDropDownWeightEntry .1.3.6.1.4.1.34592.1.3.3.6.2 |
dbaDropDownWeightEntryDBA drop down weight configuration entry DbaDropDownWeightEntry .1.3.6.1.4.1.34592.1.3.3.6.2.1 |
l0DropDownWeightlevel 0 drop down weightrw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.2.1.1 |
l1DropDownWeightlevel 1 drop down weightrw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.2.1.2 |
l2DropDownWeightlevel 2 drop down weightrw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.2.1.3 |
dbaPollRateTableDBA polling rate table SEQUENCE OF DbaPollRateEntry .1.3.6.1.4.1.34592.1.3.3.6.3 |
dbaPollRateEntryDBA polling rate entry DbaPollRateEntry .1.3.6.1.4.1.34592.1.3.3.6.3.1 |
l0PollingRatelevel 0 links polling raterw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.3.1.1 |
l1PollingRatelevel 1 links polling raterw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.3.1.2 |
l2PollingRatelevel 2 links polling raterw Integer32 .1.3.6.1.4.1.34592.1.3.3.6.3.1.3 |
aggreBandWidthTableAggregate bandwidth configuration table SEQUENCE OF AggreBandWidthEntry .1.3.6.1.4.1.34592.1.3.3.7 |
aggreBandWidthEntryAggregate bandwidth configuration entry AggreBandWidthEntry .1.3.6.1.4.1.34592.1.3.3.7.1 |
directionIdAdministrativly assigned identification for the purpose
to distinguish different data direction DataDirection (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.7.1.1 |
aggreBandWidthAggregate bandwidthrw Integer32 .1.3.6.1.4.1.34592.1.3.3.7.1.2 |
aggreMaxBurstSizeAggregate max burst sizerw Integer32 .1.3.6.1.4.1.34592.1.3.3.7.1.3 |
oltAclRuleTableOLT acl rule configuration table SEQUENCE OF OltAclRuleEntry .1.3.6.1.4.1.34592.1.3.3.8 |
oltAclRuleEntryOLT configuration rule entry OltAclRuleEntry .1.3.6.1.4.1.34592.1.3.3.8.1 |
oltPortIdAdministrativly assigned port ID, used as entry index Enumeration .1.3.6.1.4.1.34592.1.3.3.8.1.1 |
oltAclRuleDataDescription:
This variable is used to contain the OLT ACL data. Data format:
GET:
2 2 1 1 1 1
|data length|rule numbers|direction|priority|action|clause numbers|
|<
1 6 1
| field | value | operator |
|<-repeat clause number times->|
SET/DELETE:
2 1 1 1 1
-
|data length|command type|priority|reserved|clause numbers|
-
1 6 1
| field | value | operator |
|<-repeat clause number times->|
para comment:
command type: 1->set, 2->deleterw OCTET STRING .1.3.6.1.4.1.34592.1.3.3.8.1.2 |
priCopyMapTablePriority copy value map configuration table SEQUENCE OF PriCopyMapEntry .1.3.6.1.4.1.34592.1.3.3.9 |
priCopyMapEntryPriority copy value map configuration entry PriCopyMapEntry .1.3.6.1.4.1.34592.1.3.3.9.1 |
priCopyMapData1 1 1 .. 1 ..
-
|A/B Precedence|Default COS| N | COS | M | COS |
-
|<-repeat N times->| |<-repeat M times->|rw OCTET STRING .1.3.6.1.4.1.34592.1.3.3.9.1.1 |
oltIgmpProxy OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.10 |
igmpProxyConfigTable SEQUENCE OF IgmpProxyConfigEntry .1.3.6.1.4.1.34592.1.3.3.10.1 |
igmpProxyConfigEntry IgmpProxyConfigEntry .1.3.6.1.4.1.34592.1.3.3.10.1.1 |
maxIgmpGroupsrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.1 |
robustCountrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.2 |
queryIntervalrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.3 |
queryRspTimeoutrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.4 |
queryMaxResTimerw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.5 |
startQueryCountrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.6 |
startupQueryIntervalstartup query intrvalrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.7 |
lastMemberQueryCountlast Member Query Count,range 0
::= { igmpProxyConfigEntry 8 }
lastMemberQueryInterval OBJECT-TYPE
SYNTAX Integer32 (11..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTIONrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.12 |
igmpQueuesrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.13 |
igmpSlaMinGuaranteedBWrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.14 |
igmpSlaMaxAllowedBWrw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.15 |
igmpSlaDelaySensitiverw Enumeration .1.3.6.1.4.1.34592.1.3.3.10.1.1.16 |
igmpSlaMaxBurstSizerw Integer32 .1.3.6.1.4.1.34592.1.3.3.10.1.1.17 |
igmpProxyOperRestore all the configurable values to factory defaultrw Enumeration .1.3.6.1.4.1.34592.1.3.3.10.1.1.19 |
igmpGroupTable SEQUENCE OF IgmpGroupEntry .1.3.6.1.4.1.34592.1.3.3.10.2 |
igmpGroupEntry IgmpGroupEntry .1.3.6.1.4.1.34592.1.3.3.10.2.1 |
igmpGroupIndexAdministratorly assigned entry index value Integer32 .1.3.6.1.4.1.34592.1.3.3.10.2.1.1 |
igmpGroupVlanro Integer32 .1.3.6.1.4.1.34592.1.3.3.10.2.1.2 |
igmpGroupIpAddrro IpAddress .1.3.6.1.4.1.34592.1.3.3.10.2.1.3 |
accessUserIdentifer OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.11 |
accessUserIdentiferConfigTableDescription. PPPOE+ feature management objects SEQUENCE OF AccessUserIdentiferConfigEntry .1.3.6.1.4.1.34592.1.3.3.11.1 |
accessUserIdentiferConfigEntryDescription. The PPPOE+ feature act on each OLT (PON port) AccessUserIdentiferConfigEntry .1.3.6.1.4.1.34592.1.3.3.11.1.1 |
pppoePlusEnableDescription. Enable/Disable pppoe+ feature, when enabled
PON card firmware will sniff each pppoe require frames
sent from user divice and then add cared info (normal info
will be onu ID,onu port, vlan ID) to the protocol specified
frame field.
This feature is usefull when exact user identify is needed.
Disable OLT is essential before set this feature.rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.11.1.1.1 |
dhcpOption82Description.rw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.11.1.1.2 |
llid OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.12 |
llidConfigTable SEQUENCE OF LlidConfigEntry .1.3.6.1.4.1.34592.1.3.3.12.1 |
llidConfigEntry LlidConfigEntry .1.3.6.1.4.1.34592.1.3.3.12.1.1 |
linkIdthis object is defined to identify 'Logical Links' registered on
OLT, it is a numbered value begin from 1 to max permit Link numbers.
it is used within a OLT range.
this object is different from the followwed 'llidAssigned' object,the
latter is the LLID value allocated by OLT itself. the 'linkId' is
allocated by PON card software. Unsigned32 .1.3.6.1.4.1.34592.1.3.3.12.1.1.1 |
llidAssignedLLID value allocated by OLTro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.12.1.1.2 |
associatedOnuIdAssociated ONU ID. the ONU ID that this Logical Link register fromro Unsigned32 .1.3.6.1.4.1.34592.1.3.3.12.1.1.3 |
llidMacLogical Link's MAC Addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.1.1.4 |
linkOnLineStatusDescription.ro DeviceStatus (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.12.1.1.5 |
keyChangeTimerencryption used key change timer, set to non-zero value will enable
down stream encryption, set to zero will disable this feature.
the value unit is 'second'.rw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.1.1.6 |
llidBridgeTyperw Enumeration .1.3.6.1.4.1.34592.1.3.3.12.1.1.7 |
llidMacEntryLimitrw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.1.1.8 |
crossConnectLinkIdthe link ID of the link which Cross Connect with this link if it is
in Cross Connect Bridge Mode.rw Unsigned32 .1.3.6.1.4.1.34592.1.3.3.12.1.1.9 |
llidOperationrw Enumeration .1.3.6.1.4.1.34592.1.3.3.12.1.1.10 |
llidAdvancedManage OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.12.2 |
linkOamRateTableDescription. Reserved, generally, the Link OAM rate is used
for debugging SEQUENCE OF LinkOamRateEntry .1.3.6.1.4.1.34592.1.3.3.12.2.1 |
linkOamRateEntryDescription. LinkOamRateEntry .1.3.6.1.4.1.34592.1.3.3.12.2.1.1 |
maxLinkOamRateDescription.rw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.2.1.1.1 |
minLinkOamRateDescription.rw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.2.1.1.2 |
sla OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.12.3 |
llidSlaTable SEQUENCE OF LlidSlaEntry .1.3.6.1.4.1.34592.1.3.3.12.3.1 |
llidSlaEntry LlidSlaEntry .1.3.6.1.4.1.34592.1.3.3.12.3.1.1 |
minGuaranteedBWMinimum guaranted bandwidthrw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.1.1.1 |
maxAllowedBWMax allowed bandwidthrw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.1.1.2 |
delaySensitivetransmit delay sensitive or tolerantrw Enumeration .1.3.6.1.4.1.34592.1.3.3.12.3.1.1.3 |
maxBurstSizeMaximum burst sizerw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.1.1.4 |
slaEnableSla enable disablerw OperSwitch (EPON-EOC-MIB) .1.3.6.1.4.1.34592.1.3.3.12.3.1.1.5 |
slaWeightTable SEQUENCE OF SlaWeightEntry .1.3.6.1.4.1.34592.1.3.3.12.3.2 |
slaWeightEntry SlaWeightEntry .1.3.6.1.4.1.34592.1.3.3.12.3.2.1 |
dbaTokensrw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.2.1.1 |
schedulerMinTokensrw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.2.1.2 |
schedulerMaxTokensrw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.2.1.3 |
forceReportrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.3.2.1.4 |
multicastSlaTable SEQUENCE OF MulticastSlaEntry .1.3.6.1.4.1.34592.1.3.3.12.3.3 |
multicastSlaEntry MulticastSlaEntry .1.3.6.1.4.1.34592.1.3.3.12.3.3.1 |
multiMinGuanBWrw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.3.1.1 |
multiMaxAllowedBWrw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.3.1.2 |
multiDelaySensitiverw Enumeration .1.3.6.1.4.1.34592.1.3.3.12.3.3.1.3 |
multiMaxBurstSizerw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.3.3.1.4 |
llidVlan OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.12.4 |
llidVlanCfgTable SEQUENCE OF LlidVlanCfgEntry .1.3.6.1.4.1.34592.1.3.3.12.4.1 |
llidVlanCfgEntry LlidVlanCfgEntry .1.3.6.1.4.1.34592.1.3.3.12.4.1.1 |
llidVlanTagVlan and translated vlan tags.
Data formats:
vlan tag | translated vlan id |
2B 2B
translated vlan tag must be set to 0 if the link is not in
vlan translate mode Integer32 .1.3.6.1.4.1.34592.1.3.3.12.4.1.1.1 |
llidVlanRowStatusCreate or delete a vlan tag for a given LinkIdrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.4.1.1.2 |
vlanLlidTable SEQUENCE OF VlanLlidEntry .1.3.6.1.4.1.34592.1.3.3.12.4.2 |
vlanLlidEntry VlanLlidEntry .1.3.6.1.4.1.34592.1.3.3.12.4.2.1 |
vlanId Unsigned32 .1.3.6.1.4.1.34592.1.3.3.12.4.2.1.1 |
linkIDsInVlanThis object is a linkId container, which contain all the linkIds
value which belong to this vlan.
Data formats:
link number|linkId0|linkId1|.....|linkIdn|......
2B 1B 1B 1Bro OCTET STRING .1.3.6.1.4.1.34592.1.3.3.12.4.2.1.2 |
priVlanTableDescription. Reserved SEQUENCE OF PriVlanEntry .1.3.6.1.4.1.34592.1.3.3.12.4.3 |
priVlanEntryDescription. PriVlanEntry .1.3.6.1.4.1.34592.1.3.3.12.4.3.1 |
netVlanIdDescription.rw INTEGER .1.3.6.1.4.1.34592.1.3.3.12.4.3.1.1 |
upstreamCosDescription.rw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.4.3.1.2 |
priSelectorDescription.rw Enumeration .1.3.6.1.4.1.34592.1.3.3.12.4.3.1.3 |
minPriValueDescription.rw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.4.3.1.4 |
maxPriValueDescription.rw Integer32 .1.3.6.1.4.1.34592.1.3.3.12.4.3.1.5 |
transNonTosFrameDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.4.3.1.6 |
priVlanRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.4.3.1.7 |
blockedLinkTable SEQUENCE OF BlockedLinkEntry .1.3.6.1.4.1.34592.1.3.3.12.5 |
blockedLinkEntry BlockedLinkEntry .1.3.6.1.4.1.34592.1.3.3.12.5.1 |
blockedLinkMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.5.1.1 |
blockedMacOperrw Enumeration .1.3.6.1.4.1.34592.1.3.3.12.5.1.2 |
macAddr OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.12.6 |
dynamicMac OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.12.6.1 |
dynMacOperTable SEQUENCE OF DynMacOperEntry .1.3.6.1.4.1.34592.1.3.3.12.6.1.1 |
dynMacOperEntry DynMacOperEntry .1.3.6.1.4.1.34592.1.3.3.12.6.1.1.1 |
dynMacOperationrw Enumeration .1.3.6.1.4.1.34592.1.3.3.12.6.1.1.1.1 |
dynMacTable SEQUENCE OF DynMacEntry .1.3.6.1.4.1.34592.1.3.3.12.6.1.2 |
dynMacEntry DynMacEntry .1.3.6.1.4.1.34592.1.3.3.12.6.1.2.1 |
dynMacIndex Integer32 .1.3.6.1.4.1.34592.1.3.3.12.6.1.2.1.1 |
dynMacAddrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.6.1.2.1.2 |
staticMac OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.12.6.2 |
staticMacTable SEQUENCE OF StaticMacEntry .1.3.6.1.4.1.34592.1.3.3.12.6.2.1 |
staticMacEntry StaticMacEntry .1.3.6.1.4.1.34592.1.3.3.12.6.2.1.1 |
staticMacIndexDescription. Integer32 .1.3.6.1.4.1.34592.1.3.3.12.6.2.1.1.1 |
staticMacAddrrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.6.2.1.1.2 |
staticMacRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.34592.1.3.3.12.6.2.1.1.3 |
onuP2pTableDescription. SEQUENCE OF OnuP2pEntry .1.3.6.1.4.1.34592.1.3.3.13 |
onuP2pEntryDescription. OnuP2pEntry .1.3.6.1.4.1.34592.1.3.3.13.1 |
onuP2pEnDis0:disable
1:enablerw Enumeration .1.3.6.1.4.1.34592.1.3.3.13.1.1 |
onuP2pPonEnDisDescription.rw Enumeration .1.3.6.1.4.1.34592.1.3.3.13.1.2 |
fdOltConformance OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.20 |
fdOltGroups OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.20.1 |
fdOltCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.34592.1.3.3.20.2 |