FASTPATH-ROUTING6-MIB
AI MIB Summary
The FASTPATH-ROUTING6-MIB enables monitoring and management of IPv6 routing tables, neighbor discovery states, and interface metrics on NETGEAR FastPath hardware platforms. This private MIB provides specific visibility into IPv6 forwarding decisions and routing protocol adjacency states for network troubleshooting and policy enforcement.
The NETGEAR Private MIB for FastPath Ipv6 Routing
Main OID:
fastPathRoutingIpv6.1.3.6.1.4.1.4526.10.30
62
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
fastPathRoutingIpv6The NETGEAR Private MIB for FastPath Ipv6 Routing MODULE-IDENTITY .1.3.6.1.4.1.4526.10.30 |
agentIpv6Group OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.30.1 |
agentIpv6RoutingModeAdministratively enables/disables ipv6 unicast routing on the switch.rw Enumeration .1.3.6.1.4.1.4526.10.30.1.1 |
agentIpv6InterfaceTable SEQUENCE OF AgentIpv6InterfaceEntry .1.3.6.1.4.1.4526.10.30.1.2 |
agentIpv6InterfaceEntry AgentIpv6InterfaceEntry .1.3.6.1.4.1.4526.10.30.1.2.1 |
agentIpv6InterfaceIfIndexThe IfIndex associated with this instance.ro Integer32 .1.3.6.1.4.1.4526.10.30.1.2.1.1 |
agentIpv6InterfaceMtuValueConfigures the MTU value for this interface.If it is not yet configured,
retrieving the value of this object results in a zero value.
Setting the value zero to this object effectively un-configures the MTU.rw Unsigned32 (0|1280..1500) .1.3.6.1.4.1.4526.10.30.1.2.1.2 |
agentIpv6InterfaceDadTransmitsConfigures the dad transmits value for this interface.rw Integer32 .1.3.6.1.4.1.4526.10.30.1.2.1.3 |
agentIpv6InterfaceLinkLocalOnlyWhen enabled, interface is capable of ipv6 operation without a global address.
In this case, an eui-64 based link-local address is used.rw Enumeration .1.3.6.1.4.1.4526.10.30.1.2.1.4 |
agentIpv6InterfaceIcmpUnreachablesIf this object is enable, it indicates that ICMPv6 unreachables can be sent on this
interface.rw Enumeration .1.3.6.1.4.1.4526.10.30.1.2.1.5 |
agentIpv6RouterAdvertisementTableThere is no global administrative flag for router advertisement. The global
routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing
is disabled, router advertisement is disabled as well. SEQUENCE OF AgentIpv6RouterAdvertisementEntry .1.3.6.1.4.1.4526.10.30.1.3 |
agentIpv6RouterAdvertisementEntry AgentIpv6RouterAdvertisementEntry .1.3.6.1.4.1.4526.10.30.1.3.1 |
agentIpv6RouterAdvertisementIfIndexInterface Number to configure Router Advertisement on.ro Integer32 .1.3.6.1.4.1.4526.10.30.1.3.1.1 |
agentIpv6RouterAdvertisementSuppressModeEnable or disable router advertisement suppression on the interface.rw Enumeration .1.3.6.1.4.1.4526.10.30.1.3.1.2 |
agentIpv6RouterAdvertisementMaxAdvertisementIntervalMaximum time allowed between sending router advertisements
from the interface.rw Integer32 .1.3.6.1.4.1.4526.10.30.1.3.1.3 |
agentIpv6RouterAdvertisementAdvertisementLifetimeValue of lifetime field of router advertisement sent from
the interface.
This value must be greater than or equal to
agentIpv6RouterAdvertisementMaxAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.4526.10.30.1.3.1.4 |
agentIpv6RouterAdvertisementNbrSolicitIntervalValue of retrans time field of router advertisement sent from
the interface. A value of 0 means this router does not specifiy
the interval.rw Integer32 .1.3.6.1.4.1.4526.10.30.1.3.1.5 |
agentIpv6RouterAdvertisementReachableTimeValue of reachable time field of router advertisement sent from
the interface. A value of 0 means this router does not specifiy
the interval.rw Integer32 .1.3.6.1.4.1.4526.10.30.1.3.1.6 |
agentIpv6RouterAdvertisementManagedFlagValue of managed config field of router advertisement sent from
the interface.rw Enumeration .1.3.6.1.4.1.4526.10.30.1.3.1.7 |
agentIpv6RouterAdvertisementOtherFlagValue of other config field of router advertisement sent from
the interface.rw Enumeration .1.3.6.1.4.1.4526.10.30.1.3.1.8 |
agentIpv6AddrPrefixTableThe list of IPv6 address prefixes of
IPv6 interfaces. SEQUENCE OF AgentIpv6AddrPrefixEntry .1.3.6.1.4.1.4526.10.30.1.4 |
agentIpv6AddrPrefixEntryAn interface entry containing objects of
a particular IPv6 address prefix. AgentIpv6AddrPrefixEntry .1.3.6.1.4.1.4526.10.30.1.4.1 |
agentIpv6AddrPrefixThe prefix associated with the this interface. Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.4526.10.30.1.4.1.1 |
agentIpv6AddrPrefixLengthThe length of the prefix (in bits). INTEGER .1.3.6.1.4.1.4526.10.30.1.4.1.2 |
agentIpv6AddrPrefixOnLinkFlagThis object has the value 'true(1)', if this
prefix can be used for on-link determination
and the value 'false(2)' otherwise.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.10.30.1.4.1.3 |
agentIpv6AddrPrefixAutonomousFlagAutonomous address configuration flag. When
true(1), indicates that this prefix can be used
for autonomous address configuration (i.e. can
be used to form a local interface address).
If false(2), it is not used to autoconfigure
a local interface address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.10.30.1.4.1.4 |
agentIpv6AddrPrefixAdvPreferredLifetimeIt is the length of time in seconds that this
prefix will remain preferred, i.e. time until
deprecation. A value of 4,294,967,295 represents
infinity.
The address generated from a deprecated prefix
should no longer be used as a source address in
new communications, but packets received on such
an interface are processed as expected.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.4526.10.30.1.4.1.5 |
agentIpv6AddrPrefixAdvValidLifetimeIt is the length of time in seconds that this
prefix will remain valid, i.e. time until
invalidation. A value of 4,294,967,295 represents
infinity.
The address generated from an invalidated prefix
should not appear as the destination or source
address of a packet.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.4526.10.30.1.4.1.6 |
agentIpv6AddrTableThe table of addressing information relevant to
this node's interface addresses. SEQUENCE OF AgentIpv6AddrEntry .1.3.6.1.4.1.4526.10.30.1.5 |
agentIpv6AddrEntryThe addressing information for one of this
node's interface addresses. AgentIpv6AddrEntry .1.3.6.1.4.1.4526.10.30.1.5.1 |
agentIpv6AddrAddressThe IPv6 address to which this entry's addressing
information pertains. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.4526.10.30.1.5.1.1 |
agentIpv6AddrPfxLengthThe length of the prefix (in bits) associated with
the IPv6 address of this entry.rw INTEGER .1.3.6.1.4.1.4526.10.30.1.5.1.2 |
agentIpv6AddrEui64FlagThis object has the value 'true(1)', if this
address uses and eui-64 generated interface identifier and the value
'false(2)' otherwise.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.10.30.1.5.1.3 |
agentIpv6AddrStatusCreates a new entry in the Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentIpv6NetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.30.1.5.1.4 |
agentIpv6StaticRouteTableIPv6 Static Routing table. This table contains
an entry for each valid IPv6 static unicast route
that can be used for packet forwarding
determination. SEQUENCE OF AgentIpv6StaticRouteEntry .1.3.6.1.4.1.4526.10.30.1.6 |
agentIpv6StaticRouteEntryA routing entry. AgentIpv6StaticRouteEntry .1.3.6.1.4.1.4526.10.30.1.6.1 |
agentIpv6StaticRouteDestThe destination IPv6 address of this route.
This object may not take a Multicast address
value. Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.4526.10.30.1.6.1.1 |
agentIpv6StaticRoutePfxLengthIndicates the prefix length of the destination
address. INTEGER .1.3.6.1.4.1.4526.10.30.1.6.1.2 |
agentIpv6StaticRouteIfIndexThe index value which uniquely identifies the local
interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ipv6IfIndex. For routes with global address next hop this
value can be zero. Ipv6IfIndexOrZero (IPV6-TC) .1.3.6.1.4.1.4526.10.30.1.6.1.3 |
agentIpv6StaticRouteNextHopThe address of the next
system en route. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.4526.10.30.1.6.1.4 |
agentIpv6StaticRoutePreferenceThe routing preference metric for this route. A lower
value is more preferred.rw INTEGER .1.3.6.1.4.1.4526.10.30.1.6.1.5 |
agentIpv6StaticRouteStatusCreates a new entry in the Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table.
destroy(6) - Removes the associated route from the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.30.1.6.1.6 |
agentIpv6ServicePortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.30.1.7 |
agentIpv6ServicePortPrefixTableIPv6 Service Port Prefix Table. This table contains
an entry for each valid IPv6 prefix configured on the
Service Port. SEQUENCE OF AgentIpv6ServicePortPrefixEntry .1.3.6.1.4.1.4526.10.30.1.7.1 |
agentIpv6ServicePortPrefixEntryAn IPv6 Service Port Prefix entry. AgentIpv6ServicePortPrefixEntry .1.3.6.1.4.1.4526.10.30.1.7.1.1 |
agentIpv6ServicePortPrefixIndexThe index of the Ipv6 Prefix Address configured on the
Service Port. Removal of a row will cause index values
to be reassigned. Unsigned32 .1.3.6.1.4.1.4526.10.30.1.7.1.1.1 |
agentIpv6ServicePortPrefixThe Ipv6 Prefix Address configured on the Service Port.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.4526.10.30.1.7.1.1.2 |
agentIpv6ServicePortPrefixLengthThe length of the IPv6 Prefix Address.ro Unsigned32 .1.3.6.1.4.1.4526.10.30.1.7.1.1.3 |
agentIpv6ServicePortDefaultRouterTableIPv6 Service Port Default Router Table. This table contains
an entry for each valid IPv6 Default Router configured on the
Service Port. SEQUENCE OF AgentIpv6ServicePortDefaultRouterEntry .1.3.6.1.4.1.4526.10.30.1.7.2 |
agentIpv6ServicePortDefaultRouterEntryAn IPv6 Service Port Default Router entry. AgentIpv6ServicePortDefaultRouterEntry .1.3.6.1.4.1.4526.10.30.1.7.2.1 |
agentIpv6ServicePortDefaultRouterIndexThe index of the IPv6 Default Router Address
configured on the Service Port. Removal of a
row will cause index values to be reassigned. Unsigned32 .1.3.6.1.4.1.4526.10.30.1.7.2.1.1 |
agentIpv6ServicePortDefaultRouterThe Address of the IPv6 Default Router configured
on the Service Port.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.4526.10.30.1.7.2.1.2 |
agentIpv6ServicePortNbrTableIPv6 Service Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Service Port. SEQUENCE OF AgentIpv6ServicePortNbrEntry .1.3.6.1.4.1.4526.10.30.1.7.3 |
agentIpv6ServicePortNbrEntryAn IPv6 Service Port Neighbor entry. AgentIpv6ServicePortNbrEntry .1.3.6.1.4.1.4526.10.30.1.7.3.1 |
agentIpv6ServicePortNbrAddrThe Ipv6 Address of a neighbor switch visible to the Service Port. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.4526.10.30.1.7.3.1.1 |
agentIpv6ServicePortNbrPhysAddrThe MacAddress of the neighboring switch.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.10.30.1.7.3.1.2 |
agentIpv6ServicePortNbrStateThe state of the neighboring switch:
reachable(1) - The neighbor is reachable by this switch.
stale(2) - Information about the neighbor is scheduled for deletion.
delay(3) - No information has been received from neighbor during delay period.
probe(4) - Switch is attempting to probe for this neighbor.
unknown(6) - Unknown status.ro Enumeration .1.3.6.1.4.1.4526.10.30.1.7.3.1.3 |
agentIpv6ServicePortNbrUpdatedThe last sysUpTime that this neighbor has been updated.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4526.10.30.1.7.3.1.4 |
agentIpv6ServicePortNbrIsRouterReturns true(1) if the neighbor machine is a router,
false(2) otherwise.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.10.30.1.7.3.1.5 |
agentIpv6IcmpControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.30.1.8 |
agentIpv6IcmpRateLimitIntervalSpecifies the time interval between tokens being placed in the bucket for
ICMP Ratelimit.rw Integer32 .1.3.6.1.4.1.4526.10.30.1.8.1 |
agentIpv6IcmpRateLimitBurstSizeSpecifies the number of tokens to be placed after timeout.rw Integer32 .1.3.6.1.4.1.4526.10.30.1.8.2 |