FASTPATH-QOS-AUTOVOIP-MIB
The FASTPATH-QOS-AUTOVOIP-MIB module provides SNMP definitions for monitoring and managing Quality of Service (QoS) parameters specifically for VoIP traffic on Brocade (Foundry) FastPath network devices. It enables the tracking of VoIP session states, call admission control metrics, and traffic prioritization policies within the VoIP Flex package to ensure voice service reliability.
Imported Objects
Objects
7 total| Object Name |
|---|
fastPathQOSAUTOVOIPThe MIB definitions for Quality of Service - VoIP Flex package. MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.3.4 |
agentAutoVoIPCfgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.3.4.1 |
agentAutoVoIPTableA table providing configuration of Auto VoIP Profile. SEQUENCE OF AgentAutoVoIPEntry .1.3.6.1.4.1.4413.1.1.3.4.1.1 |
agentAutoVoIPEntryAuto VoIP Profile configuration for a port. AgentAutoVoIPEntry .1.3.6.1.4.1.4413.1.1.3.4.1.1.1 |
agentAutoVoIPIntfIndexThis is a unique index for an entry in the
agentAutoVoIPTable. A non-zero value indicates
the ifIndex for the corresponding interface entry
in the ifTable. A value of zero represents global
configuration, which in turn causes all interface
entries to be updated for a set operation, or
reflects the most recent global setting for a get
operation. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.3.4.1.1.1.1 |
agentAutoVoIPModeEnables / disables AutoVoIP profile on an interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.4.1.1.1.2 |
agentAutoVoIPCosQueueCos Queue to which all VoIP traffic is mapped to.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.3.4.1.1.1.3 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.