EdgeSwitch-ROUTING-MIB
The Ubiquiti Private MIB for FastPath Routing
Main OID:
fastPathRouting.1.3.6.1.4.1.4413.1.1.2
330
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
330 total| Object Name |
|---|
fastPathRoutingThe Ubiquiti Private MIB for FastPath Routing MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.2 |
agentSwitchArpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.1 |
agentSwitchArpAgeoutTimeConfigures the ARP entry ageout time in seconds.
Allowable range: 15-21600rw Integer32 .1.3.6.1.4.1.4413.1.1.2.1.1 |
agentSwitchArpResponseTimeConfigures the ARP request response timeout in seconds.
Allowable range: 1-10rw Integer32 .1.3.6.1.4.1.4413.1.1.2.1.2 |
agentSwitchArpMaxRetriesConfigures the ARP count of maximum request for retries.
Allowable range: 0-10rw Integer32 .1.3.6.1.4.1.4413.1.1.2.1.3 |
agentSwitchArpCacheSizeConfigures the ARP maximum number of entries in the cache.
Allowable range is platform-specific.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.1.4 |
agentSwitchArpDynamicRenewThis indicates the current setting of ARP dynamic renew mode.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.1.5 |
agentSwitchArpTotalEntryCountCurrentCurrent number of entries in the ARP cache.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.1.6 |
agentSwitchArpTotalEntryCountPeakPeak number of entries recorded in the ARP cache over
time. This value is restarted whenever the ARP cache
size is changed.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.1.7 |
agentSwitchArpStaticEntryCountCurrentCurrent number of configured static ARP entries.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.1.8 |
agentSwitchArpStaticEntryCountMaxMaximum number of configurable static ARP entries.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.1.9 |
agentSwitchArpTableThis table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information.obsolete SEQUENCE OF AgentSwitchArpEntry .1.3.6.1.4.1.4413.1.1.2.1.10 |
agentSwitchArpEntryobsolete AgentSwitchArpEntry .1.3.6.1.4.1.4413.1.1.2.1.10.1 |
agentSwitchArpAgeThis defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4413.1.1.2.1.10.1.1 |
agentSwitchArpIpAddressThe IP Address assigned to each interface.roobsolete IpAddress .1.3.6.1.4.1.4413.1.1.2.1.10.1.2 |
agentSwitchArpMacAddressThe hardware MAX Address that each interface maps to.rwobsolete PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.1.10.1.3 |
agentSwitchArpInterfaceThe Associated IfIndex which identified the ARP Entry.rwobsolete Integer32 .1.3.6.1.4.1.4413.1.1.2.1.10.1.4 |
agentSwitchArpTypeThe type of ARP entry.roobsolete Enumeration .1.3.6.1.4.1.4413.1.1.2.1.10.1.5 |
agentSwitchArpStatusThe status of this ARP entry. Setting this object destroy will remove the entry.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.1.10.1.6 |
agentSwitchLocalProxyArpTableThis table contains the per-interface configuration
parameters for Local Proxy Arp. SEQUENCE OF AgentSwitchLocalProxyArpEntry .1.3.6.1.4.1.4413.1.1.2.1.11 |
agentSwitchLocalProxyArpEntryRepresents a logical row in the
agentSwitchLocalProxyArpTable AgentSwitchLocalProxyArpEntry .1.3.6.1.4.1.4413.1.1.2.1.11.1 |
agentSwitchLocalProxyArpModeThe Local Proxy Arp Mode for the interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.1.11.1.1 |
agentSwitchIntfArpTableThis table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information. SEQUENCE OF AgentSwitchIntfArpEntry .1.3.6.1.4.1.4413.1.1.2.1.12 |
agentSwitchIntfArpEntry AgentSwitchIntfArpEntry .1.3.6.1.4.1.4413.1.1.2.1.12.1 |
agentSwitchIntfArpIpAddressThe Type of Address assigned to this interface. IpAddress .1.3.6.1.4.1.4413.1.1.2.1.12.1.1 |
agentSwitchIntfArpIfIndexThe Associated IfIndex which identified the ARP Entry.
This value must be specified for static ARP entries on an
unnumbered interface InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4413.1.1.2.1.12.1.2 |
agentSwitchIntfArpAgeThis defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4413.1.1.2.1.12.1.3 |
agentSwitchIntfArpMacAddressThe hardware MAX Address that each interface maps to.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.1.12.1.4 |
agentSwitchIntfArpTypeThe type of ARP entry.ro Enumeration .1.3.6.1.4.1.4413.1.1.2.1.12.1.5 |
agentSwitchIntfArpStatusThe status of this ARP entry. Setting this object destroy will remove the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.1.12.1.6 |
agentSwitchIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.2 |
agentSwitchIpRoutingModeAdministratively enables/disables routing on the switch.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.1 |
agentSwitchIpDefaultGatewaySpecifies the Default Gateway manually configured.rw IpAddress .1.3.6.1.4.1.4413.1.1.2.2.2 |
agentSwitchIpInterfaceTable SEQUENCE OF AgentSwitchIpInterfaceEntry .1.3.6.1.4.1.4413.1.1.2.2.3 |
agentSwitchIpInterfaceEntry AgentSwitchIpInterfaceEntry .1.3.6.1.4.1.4413.1.1.2.2.3.1 |
agentSwitchIpInterfaceIfIndexThe IfIndex associated with this instance.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.2.3.1.1 |
agentSwitchIPAddressConfigMethodThe Source of the IP Address. User can set the object to none(0) or dhcp(2).
Option dhcp(2) enables Dhcp Client on the interface.
Option none(0) disables Dhcp Client on the interface.
Get on this object returns manual(1) only when the interface has a manually configured address.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.3.1.2 |
agentSwitchIpInterfaceIpAddressThe IpAddress assigned to this interface. When setting this value,
the value of agentSwitchIpInterfaceNetMask must be set at the same time.rw IpAddress .1.3.6.1.4.1.4413.1.1.2.2.3.1.3 |
agentSwitchIpInterfaceNetMaskThe NetMask assigned to this interface. When setting this value, the
value of agentSwitchIpInterfaceIpAddress must be set at the same time.rw IpAddress .1.3.6.1.4.1.4413.1.1.2.2.3.1.4 |
agentSwitchIpInterfaceClearIpSets the interfaces IpAddress and NetMask back to 0.0.0.0rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.3.1.5 |
agentSwitchIpInterfaceRoutingModeEnables or disables routing for this interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.3.1.6 |
agentSwitchIpInterfaceProxyARPModeEnables or disables Proxy ARP for this interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.3.1.7 |
agentSwitchIpInterfaceMtuValueConfigures the MTU value for this interface. The applicable range is
68 to the <interface MTU value - 18>, in bytes. Get of this object
returns the effective MTU value on the interface. Set of this object
with a value of 0 resets the MTU to the default IP MTU value on the
interface.rw Unsigned32 (0|68..9198) .1.3.6.1.4.1.4413.1.1.2.2.3.1.8 |
agentSwitchIpInterfaceBandwidthConfigures the Bandwidth value for this interface. If the value returned is 0
bandwidth for this interface is not Configured.rw Unsigned32 (0|1..10000000) .1.3.6.1.4.1.4413.1.1.2.2.3.1.9 |
agentSwitchIpInterfaceUnnumberedIfIndexIf this object is non-zero, it indicates that the interface is unnumbered,
and specifies which interface the address is borrowed from.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.2.2.3.1.10 |
agentSwitchIpInterfaceIcmpUnreachablesIf this object is enable, it indicates that ICMP unreachables can be sent on this
interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.3.1.11 |
agentSwitchIpInterfaceIcmpRedirectsIf this object is enable and agentSwitchIpIcmpRedirectsMode is also enable ICMP Redirects
can be sent on this interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.3.1.12 |
agentSwitchDhcpOperationRenew or Release the IP Address learned through DHCP.
Get on this object always gives none. none means no operation is performed on dhcp.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.3.1.13 |
agentSwitchIpInterfaceSuppressedThis mib variable contains the following values, which has the meaning as:
'unsuppressed' - The interface is not suppressed
'suppressed' - The interface is suppressedro Enumeration .1.3.6.1.4.1.4413.1.1.2.2.3.1.14 |
agentSwitchIpInterfaceNumberOfFlapsThis mib variable displays the number of flaps occurred on the interfacero Unsigned32 (0 .. 4294967295) .1.3.6.1.4.1.4413.1.1.2.2.3.1.15 |
agentSwitchIpInterfaceCurrentPenaltyThis mib variable displays the current penalty of an interfacero Unsigned32 (0 .. 20000) .1.3.6.1.4.1.4413.1.1.2.2.3.1.16 |
agentSwitchIpInterfaceReUseTimeThis mib variable displays the number of seconds until the interface is
allowed to come upro Unsigned32 (0 .. 255) .1.3.6.1.4.1.4413.1.1.2.2.3.1.17 |
agentSwitchIpRouterDiscoveryTableThere is no global administrative flag for router discovery. The global
routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing
is disabled, router discovery is disabled as well. SEQUENCE OF AgentSwitchIpRouterDiscoveryEntry .1.3.6.1.4.1.4413.1.1.2.2.4 |
agentSwitchIpRouterDiscoveryEntry AgentSwitchIpRouterDiscoveryEntry .1.3.6.1.4.1.4413.1.1.2.2.4.1 |
agentSwitchIpRouterDiscoveryIfIndexInterface Number to configure Router Discovery on.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.2.4.1.1 |
agentSwitchIpRouterDiscoveryAdvertiseModeEnable or disable router discovery on the interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.4.1.2 |
agentSwitchIpRouterDiscoveryMaxAdvertisementIntervalMaximum time allowed between sending router advertisements
from the interface.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.2.4.1.3 |
agentSwitchIpRouterDiscoveryMinAdvertisementIntervalMinimum time allowed between sending router advertisements from the interface.
This value must be less than or equal to
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.2.4.1.4 |
agentSwitchIpRouterDiscoveryAdvertisementLifetimeValue of lifetime field of router advertsisement sent from
the interface.
This value must be greater than or equal to
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.2.4.1.5 |
agentSwitchIpRouterDiscoveryPreferenceLevelPreferability of the address as a default router address,
related to other addresses on the same subnet. This is defined
as the larger the number, the higher the preference.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.2.4.1.6 |
agentSwitchIpRouterDiscoveryAdvertisementAddressAddress used when sending router advertisements from the interface.rw IpAddress .1.3.6.1.4.1.4413.1.1.2.2.4.1.7 |
agentSwitchIpVlanTable SEQUENCE OF AgentSwitchIpVlanEntry .1.3.6.1.4.1.4413.1.1.2.2.5 |
agentSwitchIpVlanEntryA Static VLAN for which routing can be enabled/disabled AgentSwitchIpVlanEntry .1.3.6.1.4.1.4413.1.1.2.2.5.1 |
agentSwitchIpVlanIdThe Vlan's Id.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.2.5.1.1 |
agentSwitchIpVlanIfIndexThe IfIndex associated with this VLAN.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.2.5.1.2 |
agentSwitchIpVlanRoutingStatusStatus of Routing mode per Vlan.
active(1) - Vlan is enabled for routing
createAndGo(4) - Adds Vlan entry for routing
destroy(6) - Removes Vlan from routingrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.2.5.1.3 |
agentSwitchSecondaryAddressTableContains a list of secondary IP Addresses associated with an interface. SEQUENCE OF AgentSwitchSecondaryAddressEntry .1.3.6.1.4.1.4413.1.1.2.2.6 |
agentSwitchSecondaryAddressEntryA secondary IP Address for a given interface. This IP Address must not
conflict with the IP Address configured in the agentSwitchIpInterfaceTable. AgentSwitchSecondaryAddressEntry .1.3.6.1.4.1.4413.1.1.2.2.6.1 |
agentSwitchSecondaryIpAddressThe Secondary IP Address assigned to this interface. IpAddress .1.3.6.1.4.1.4413.1.1.2.2.6.1.1 |
agentSwitchSecondaryNetMaskThe Secondary Net Mask assigned to this interface. This value must be
set during creation, and can not be changed.rw IpAddress .1.3.6.1.4.1.4413.1.1.2.2.6.1.2 |
agentSwitchSecondaryStatusCreates a new entry in the Secondary Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentSwitchSecondaryNetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.2.6.1.3 |
agentSwitchHelperAddressTableReplaced by agentSwitchIntfIpHelperAddressTable.obsolete SEQUENCE OF AgentSwitchHelperAddressEntry .1.3.6.1.4.1.4413.1.1.2.2.7 |
agentSwitchHelperAddressEntryA Helper IP Address for a given interface.obsolete AgentSwitchHelperAddressEntry .1.3.6.1.4.1.4413.1.1.2.2.7.1 |
agentSwitchHelperIpAddressThe Helper IP Address assigned to this interface.obsolete IpAddress .1.3.6.1.4.1.4413.1.1.2.2.7.1.1 |
agentSwitchHelperStatusCreates a new entry in the Helper Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentSwitchHelperNetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.2.7.1.2 |
agentSwitchIpIcmpControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.2.8 |
agentSwitchIpIcmpEchoReplyModeSets the administrative Echo Reply Mode.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.8.1 |
agentSwitchIpIcmpRedirectsModeSets the administrative Mode for sending Redirects.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.8.2 |
agentSwitchIpIcmpRateLimitIntervalSpecifies the time interval between tokens being placed in the bucket for
ICMP Ratelimit.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.2.8.3 |
agentSwitchIpIcmpRateLimitBurstSizeSpecifies the number of tokens to be placed after timeout.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.2.8.4 |
agentSwitchIntfIpHelperAddressTableContains a list of IP helper addresses associated with an interface. SEQUENCE OF AgentSwitchIntfIpHelperAddressEntry .1.3.6.1.4.1.4413.1.1.2.2.10 |
agentSwitchIntfIpHelperAddressEntryAn IP helper address for a given interface. AgentSwitchIntfIpHelperAddressEntry .1.3.6.1.4.1.4413.1.1.2.2.10.1 |
agentSwitchIntfIpHelperIpAddressAn IP helper address for packets received on this interface.
An address of 0.0.0.0 identifies the entry as a discard entry.
Packets that match a discard entry are dropped. IpAddress .1.3.6.1.4.1.4413.1.1.2.2.10.1.1 |
agentSwitchIntfIpHelperUdpPortUDP port number. Received packets with this destination UDP port
number are forwarded to the helper address in this entry. Unsigned32 .1.3.6.1.4.1.4413.1.1.2.2.10.1.2 |
agentSwitchIntfIpHelperDiscardVariable obsoleted. To create a discard entry, set the
helper address to 0.0.0.0.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.2.10.1.3 |
agentSwitchIntfIpHelperHitCountThe number of times a packet has been forwarded or discarded according to this entry.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.2.2.10.1.4 |
agentSwitchIntfIpHelperStatusCreates a new entry in the Helper Address table.
Allowed values are:
createAndGo(4) - Creates an IP helper entry in this table.
destroy(6) - Removes the IP helper entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.2.10.1.5 |
agentSwitchClearIpDefaultGatewayResets the Global Default Gateway address.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.2.11 |
agentRouterRipConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.3 |
agentRouterRipAdminStateSets the administrative mode of RIP in the router.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.1 |
agentRouterRipSplitHorizonModeSets the RIP split horizon operating mode in the router.
A value of none(1) means split horizon processing is
disabled. When set to simple(2), the simple split
horizon technique is used. When set to poisonReverse(3),
the split horizon with poison reverse technique is used.
The default split horizon mode is simple(2).rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.2 |
agentRouterRipAutoSummaryModeSets the RIP auto summarization mode in the router.
A value of enable(1) means that routes advertized by
this RIP router are combined, or summarized, whenever
possible into aggregates. When set to disable(2),
routes are not aggregated in RIP updates generated
by this router. The default auto summary mode is
enable(1).rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.3 |
agentRouterRipHostRoutesAcceptModeSets the RIP host route acceptance mode in the router.
A value of enable(1) means that host routes advertized
to this RIP router will be accepted (learned) into its
routing table. When set to disable(2), host routes
advertized in RIP updates from neighboring routers
are ignored. The default host routes accept mode is
enable(1).rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.4 |
agentRouterRipDefaultMetricDefault metric of redistributed routes, when RIP redistributes
from other protocols. {0} indicates that the parameter is not configured,
this value should not be set. Valid range for set is (1..15).rw Integer32 (0|1..15) .1.3.6.1.4.1.4413.1.1.2.3.5 |
agentRouterRipDefaultMetricConfiguredFlag to determine whether RIP default-metric is configured or not.
Set to 'false' to unconfigure the default route metric. Set to 'true' is
not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.3.6 |
agentRouterRipDefaultInfoOriginateFlag to determine, whether RIP can advertise a default-route learned
from another protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.3.7 |
agentRipRouteRedistTableThis table contains the MIB objects required to configure
route-redistribution for RIP. Here, RIP is the Destination
protocol and the source protocols can be any of : BGP, OSPF,
Static, Connected. SEQUENCE OF AgentRipRouteRedistEntry .1.3.6.1.4.1.4413.1.1.2.3.8 |
agentRipRouteRedistEntry AgentRipRouteRedistEntry .1.3.6.1.4.1.4413.1.1.2.3.8.1 |
agentRipRouteRedistSourceSource route, from which RIP can redistribute routes.
This object also acts as the identifier for the
RIP redistribution Table entry.ro Enumeration .1.3.6.1.4.1.4413.1.1.2.3.8.1.1 |
agentRipRouteRedistModeUser enabels/disables route-redistribution for a particular source
protocol.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.8.1.2 |
agentRipRouteRedistMetricMetric used for redistributing a particular source protocol route
into RIP. {0} indicates that the parameter is not configured, this value
should not be set. Valid range for set is (1..15).rw Integer32 (0|1..15) .1.3.6.1.4.1.4413.1.1.2.3.8.1.3 |
agentRipRouteRedistMetricConfiguredFlag to determine whether RIP redistribute-metric is configured
or not. Set to 'false' to unconfigure redistribute metric. Set to 'true'
is not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.3.8.1.4 |
agentRipRouteRedistMatchInternalIf this flag is true, RIP redistributes OSPF internal routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.8.1.5 |
agentRipRouteRedistMatchExternal1If this flag is true, RIP redistributes OSPF External1 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.8.1.6 |
agentRipRouteRedistMatchExternal2If this flag is true, RIP redistributes OSPF External2 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.8.1.7 |
agentRipRouteRedistMatchNSSAExternal1If this flag is true, RIP redistributes OSPF NSSA-External1 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.8.1.8 |
agentRipRouteRedistMatchNSSAExternal2If this flag is true, RIP redistributes OSPF NSSA-External2 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.3.8.1.9 |
agentRipRouteRedistDistListAccess-list number of the access-list, which filters routes received
from a source-protocol. A value of 0 indicates no distribute list is
configured.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.2.3.8.1.10 |
agentRipRouteRedistDistListConfiguredFlag to determine whether Access-list is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.3.8.1.11 |
agentRip2IfConfTableA list of subnets which require separate
configuration in RIP. Augments rip2IfConfTable
in the RIPv2-MIB. SEQUENCE OF AgentRip2IfConfEntry .1.3.6.1.4.1.4413.1.1.2.3.9 |
agentRip2IfConfEntryA Single Routing Domain in a single Subnet.
Augments rip2IfConfEntry in RIPv2-MIB. AgentRip2IfConfEntry .1.3.6.1.4.1.4413.1.1.2.3.9.1 |
agentRip2IfConfAuthKeyIdThe identifier for the authentication key used
on this interface. This field is only meaningful
when the RIPv2-MIB rip2IfConfAuthType is md5(3);
otherwise, the value is not used.rw INTEGER .1.3.6.1.4.1.4413.1.1.2.3.9.1.1 |
agentRouterRipRoutePrefThe route preference, sometimes called administrative distance, for RIP routes.
A route with a preference of 255 is considered unreachable.rw INTEGER .1.3.6.1.4.1.4413.1.1.2.3.10 |
agentRouterOspfConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.4 |
agentOspfDefaultMetricDefault metric of redistributed routes, when OSPF redistributes
from other protocols. {0} indicates that the parameter is not configured,
this value should not be set. Valid range for set is (1..16777214).rw Integer32 (0|1..16777214) .1.3.6.1.4.1.4413.1.1.2.4.1 |
agentOspfDefaultMetricConfiguredFlag to determine whether OSPF default-metric is configured or not.
Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is
not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.2 |
agentOspfDefaultInfoOriginateFlag to determine, whether OSPF can advertise a default-route learned
from another protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.3 |
agentOspfDefaultInfoOriginateAlwaysWhen this flag is true, the router advertises 0.0.0.0/0.0.0.0 always.
Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the
router's forwarding table contains a default route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.4 |
agentOspfDefaultInfoOriginateMetricMetric of the default route, which OSPF advertises when learned from
other protocol.
(0) indicates that the parameter is not configured, this value should not be set.
Valid range for set is (1..16777214).rw Integer32 (0|1..16777214) .1.3.6.1.4.1.4413.1.1.2.4.5 |
agentOspfDefaultInfoOriginateMetricConfiguredFlag to determine whether OSPF default-info originate metric
is configured or not. Setting to false unconfigures the
default route metric. Setting to true is not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.6 |
agentOspfDefaultInfoOriginateMetricTypeMetric Type of the default route,which OSPF advertises when learned from
other protocol. It can be 1(external type 1) or 2(external type 2).rw Enumeration .1.3.6.1.4.1.4413.1.1.2.4.7 |
agentOspfRouteRedistTableThis table contains the MIB objects required to configure
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,
Static, Connected. SEQUENCE OF AgentOspfRouteRedistEntry .1.3.6.1.4.1.4413.1.1.2.4.8 |
agentOspfRouteRedistEntry AgentOspfRouteRedistEntry .1.3.6.1.4.1.4413.1.1.2.4.8.1 |
agentOspfRouteRedistSourceSource protocol, from which OSPF can redistribute routes.
This object also acts as the identifier for the
OSPF redistribution Table entry.ro Enumeration .1.3.6.1.4.1.4413.1.1.2.4.8.1.1 |
agentOspfRouteRedistModeUser enabels/disables route-redistribution for a particular source
protocol.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.4.8.1.2 |
agentOspfRouteRedistMetricMetric used for redistributing a particular source protocol route
into OSPF.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.4.8.1.3 |
agentOspfRouteRedistMetricConfiguredFlag to determine whether OSPF redistribute-metric is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.8.1.4 |
agentOspfRouteRedistMetricTypeMetric Type of routes,which OSPF redistributes from other source protocols.
It can be 1(external type 1) or 2(external type 2).rw Enumeration .1.3.6.1.4.1.4413.1.1.2.4.8.1.5 |
agentOspfRouteRedistTagIt specifies the tag field in routes redistributed by OSPF.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.2.4.8.1.6 |
agentOspfRouteRedistSubnetsIf this value is false, then OSPF will not redistribute subnetted routes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.8.1.7 |
agentOspfRouteRedistDistListAccess-list number of the access-list, which filters routes received
from a source-protocol.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.2.4.8.1.8 |
agentOspfRouteRedistDistListConfiguredFlag to determine whether Access-list is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.8.1.9 |
agentOspfIfTableThe OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. Augments
ospfIfTable from the OSPF-MIB. SEQUENCE OF AgentOspfIfEntry .1.3.6.1.4.1.4413.1.1.2.4.9 |
agentOspfIfEntryThe OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. Augments
ospfIfEntry in OSPF-MIB. AgentOspfIfEntry .1.3.6.1.4.1.4413.1.1.2.4.9.1 |
agentOspfIfAuthKeyIdThe identifier for the authentication key used
on this interface. This field is only meaningful
when the OSPF-MIB ospfIfAuthType is md5(2);
otherwise, the value is not used.rw INTEGER .1.3.6.1.4.1.4413.1.1.2.4.9.1.1 |
agentOspfIfIpMtuIgnoreFlagConfigures the IP MTU Ignore Flag value for this OSPF interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.4.9.1.2 |
agentOspfIfPassiveModeFlag to determine whether the interface is passive.
A passive interface will not participate in the OSPF
adjacency formation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.9.1.3 |
agentOspfIfAdvertiseSecondariesConfigures the advertisability of the secondary addresses
configured on this interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.4.9.1.4 |
agentOspfVirtIfTableInformation about this router's virtual inter-
faces. Augments ospfVirtIfTable from the OSPF-MIB. SEQUENCE OF AgentOspfVirtIfEntry .1.3.6.1.4.1.4413.1.1.2.4.10 |
agentOspfVirtIfEntryInformation about a single Virtual Interface.
Augments ospfVirtIfEntry in OSPF-MIB. AgentOspfVirtIfEntry .1.3.6.1.4.1.4413.1.1.2.4.10.1 |
agentOspfVirtIfAuthKeyIdThe identifier for the authentication key used
on this virtual interface. This field is only meaningful
when the OSPF-MIB ospfVirtIfAuthType is md5(2);
otherwise, the value is not used.rw INTEGER .1.3.6.1.4.1.4413.1.1.2.4.10.1.1 |
agentRouterOspfRFC1583CompatibilityModeFrom RFC2328:
Controls the preference rules used in Section 16.4 when
choosing among multiple AS-external-LSAs advertising the
same destination. When set to 'enabled', the preference
rules remain those specified by RFC 1583 ([Ref9]). When set
to 'disabled', the preference rules are those stated in
Section 16.4.1, which prevent routing loops when AS-
external-LSAs for the same destination have been originated
from different areas. Set to 'enabled' by default.
In order to minimize the chance of routing loops, all OSPF
routers in an OSPF routing domain should have
RFC1583Compatibility set identically. When there are routers
present that have not been updated with the functionality
specified in Section 16.4.1 of this memo, all routers should
have RFC1583Compatibility set to 'enabled'. Otherwise, all
routers should have RFC1583Compatibility set to 'disabled',
preventing all routing loops.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.4.11 |
agentOspfSpfDelayTimeDelay time (in seconds) between when OSPF
receives a topology change and when it
starts an SPF calculation. It can be an
integer from 0 to 65535. The default
time is 5 seconds. A value of 0 means
that there is no delay; that is, the
SPF calculation is started immediately.rw SpfTimerRange .1.3.6.1.4.1.4413.1.1.2.4.12 |
agentOspfSpfHoldTimeMinimum time (in seconds) between two
consecutive SPF calculations. It can
be an integer from 0 to 65535. The
default time is 10 seconds. A value
of 0 means that there is no delay;
that is, two SPF calculations can
be done, one immediately after the
other.rw SpfTimerRange .1.3.6.1.4.1.4413.1.1.2.4.13 |
agentOspfAutoCostRefBwAuto cost refernece bandwidth of the
router interafaces for ospf metric calculations.
It can be an integer from 1 to 4294967. The
default reference bandwidth is 100 Mbps.rw AutoCostRefBw .1.3.6.1.4.1.4413.1.1.2.4.14 |
agentOspfOpaqueLsaSupportThe router's support for Opaque LSA types.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.15 |
agentOspfAreaOpaqueLsdbTableThe OSPF Process's Area Link State Database (LSDB).
The LSDB contains type-10 Link State Advertisements
from throughout the areas that the device is attached to. SEQUENCE OF AgentOspfAreaOpaqueLsdbEntry .1.3.6.1.4.1.4413.1.1.2.4.16 |
agentOspfAreaOpaqueLsdbEntryA single AreaOpaque Link State Advertisement. AgentOspfAreaOpaqueLsdbEntry .1.3.6.1.4.1.4413.1.1.2.4.16.1 |
agentOspfAreaOpaqueLsdbAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro IpAddress .1.3.6.1.4.1.4413.1.1.2.4.16.1.1 |
agentOspfAreaOpaqueLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertisement
format.ro Enumeration .1.3.6.1.4.1.4413.1.1.2.4.16.1.2 |
agentOspfAreaOpaqueLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.4413.1.1.2.4.16.1.3 |
agentOspfAreaOpaqueLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.4413.1.1.2.4.16.1.4 |
agentOspfAreaOpaqueLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number the more recent
the advertisement.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.4.16.1.5 |
agentOspfAreaOpaqueLsdbAgeThis field is the age of the link state advertisement
in seconds.ro Integer32 -- Should be 0..MaxAge, except when -- doNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.4413.1.1.2.4.16.1.6 |
agentOspfAreaOpaqueLsdbChecksumThis field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. The checksum
used is the same that is used for ISO connectionless
datagrams; it is commonly referred to as the Fletcher
checksum.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.4.16.1.7 |
agentOspfAreaOpaqueLsdbAdvertisementThe entire Link State Advertisement, including
its header.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string sizero OCTET STRING .1.3.6.1.4.1.4413.1.1.2.4.16.1.8 |
agentOspfLocalLsdbTableThe OSPF Process's Link-Local Link State Database
for non-virtual links.
This table is identical to the OSPF LSDB Table
in format, but contains only Link-Local Link State
Advertisements for non-virtual links. The purpose is
to allow Link-Local LSAs to be displayed for each
non-virtual interface. This table is implemented to
support type-9 LSAs which are defined
in 'The OSPF Opaque LSA Option'. SEQUENCE OF AgentOspfLocalLsdbEntry .1.3.6.1.4.1.4413.1.1.2.4.17 |
agentOspfLocalLsdbEntryA single Link State Advertisement. AgentOspfLocalLsdbEntry .1.3.6.1.4.1.4413.1.1.2.4.17.1 |
agentOspfLocalLsdbIpAddressThe IP Address of the interface from
which the LSA was received if the interface is
numbered.ro IpAddress .1.3.6.1.4.1.4413.1.1.2.4.17.1.1 |
agentOspfLocalLsdbAddressLessIfThe Interface Index of the interface from
which the LSA was received if the interface is
unnumbered.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.2.4.17.1.2 |
agentOspfLocalLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.4413.1.1.2.4.17.1.3 |
agentOspfLocalLsdbLsidThe Link State ID is an LS Type Specific field
containing a 32 bit identifier in IP address format;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.4413.1.1.2.4.17.1.4 |
agentOspfLocalLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.4413.1.1.2.4.17.1.5 |
agentOspfLocalLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number the more recent
the advertisement.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.4.17.1.6 |
agentOspfLocalLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge, except when -- doNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.4413.1.1.2.4.17.1.7 |
agentOspfLocalLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.4.17.1.8 |
agentOspfLocalLsdbAdvertisementThe entire Link State Advertisement, including
its header.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size.ro OCTET STRING .1.3.6.1.4.1.4413.1.1.2.4.17.1.9 |
agentOspfAsLsdbTableThe OSPF Process's AS-scope LSA Link State Database.
The Database contains the AS-scope Link State
Advertisements from throughout the areas that
the device is attached to.
This table is identical to the OSPF LSDB Table
in format, but contains only AS-scope Link State
Advertisements. The purpose is to allow AS-scope
LSAs to be displayed once for the router rather
than once in each non-stub area. SEQUENCE OF AgentOspfAsLsdbEntry .1.3.6.1.4.1.4413.1.1.2.4.18 |
agentOspfAsLsdbEntryA single Link State Advertisement. AgentOspfAsLsdbEntry .1.3.6.1.4.1.4413.1.1.2.4.18.1 |
agentOspfAsLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.4413.1.1.2.4.18.1.1 |
agentOspfAsLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.4413.1.1.2.4.18.1.2 |
agentOspfAsLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.4413.1.1.2.4.18.1.3 |
agentOspfAsLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number the more recent
the advertisement.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.4.18.1.4 |
agentOspfAsLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge, except when -- doNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.4413.1.1.2.4.18.1.5 |
agentOspfAsLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.4.18.1.6 |
agentOspfAsLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.4413.1.1.2.4.18.1.7 |
agentOspfDefaultPassiveModeFlag to determine, whether all the interfaces are passive interfaces
by default. A passive interface will not participate in the OSPF
adjacency formation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.4.19 |
agentOspfRoutePrefIntraAreaThe route preference, sometimes called administrative distance, for intra-area OSPFv2 routes.
A route with a preference of 255 is considered unreachable.rw INTEGER .1.3.6.1.4.1.4413.1.1.2.4.20 |
agentOspfRoutePrefInterAreaThe route preference, sometimes called administrative distance, for inter-area OSPFv2 routes.
A route with a preference of 255 is considered unreachable.rw INTEGER .1.3.6.1.4.1.4413.1.1.2.4.21 |
agentOspfRoutePrefExternalThe route preference, sometimes called administrative distance, for external OSPFv2 routes.
A route with a preference of 255 is considered unreachable.rw INTEGER .1.3.6.1.4.1.4413.1.1.2.4.22 |
agentSnmpTrapFlagsConfigGroupLayer3 OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.5 |
agentSnmpVRRPNewMasterTrapFlagThis flag enables the sending of VRRP new master notification
traps.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.5.1 |
agentSnmpVRRPAuthFailureTrapFlagThis flag enables the sending of VRRP authentication failure
notification traps.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.5.2 |
agentBootpDhcpRelayGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.6 |
agentBootpDhcpRelayMaxHopCountThe BOOTP/DHCP Max Hop Count.
The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16
assuming that the request is looped through the intermediate agents. The default value is 4.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.6.1 |
agentBootpDhcpRelayForwardingIpDHCP server addresses are now configured through IP helper.rwobsolete IpAddress .1.3.6.1.4.1.4413.1.1.2.6.2 |
agentBootpDhcpRelayForwardModeThe DHCP relay admin mode is replaced by the IP helper admin mode.rwobsolete Enumeration .1.3.6.1.4.1.4413.1.1.2.6.3 |
agentBootpDhcpRelayMinWaitTimeThe BOOTP/DHCP Minimum Wait Time.
When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs'
(seconds since client began booting) field of the request as a factor in deciding whether to
relay the request or not.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.6.4 |
agentBootpDhcpRelayCircuitIdOptionModeThe BOOTP/DHCP Circuit ID Option Mode.
This flag is set to enable/disable the network element to add/remove the DHCP Relay agent
Circuit ID sub-options.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.6.5 |
agentBootpDhcpRelayNumOfRequestsReceivedReplaced by IP helper statistics.roobsolete Integer32 .1.3.6.1.4.1.4413.1.1.2.6.6 |
agentBootpDhcpRelayNumOfRequestsForwardedReplaced by IP helper statistics.roobsolete Integer32 .1.3.6.1.4.1.4413.1.1.2.6.7 |
agentBootpDhcpRelayNumOfDiscardsReplaced by IP helper statistics.roobsolete Integer32 .1.3.6.1.4.1.4413.1.1.2.6.8 |
agentECMPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.7 |
agentECMPOspfMaxPathsIt sets the number of paths that OSPF can report for a given destination
where maxpaths is platform-dependent.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.7.1 |
agentRouterVrrpConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.8 |
agentRouterVrrpAdminStateSets the administrative mode of VRRP in the router.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.8.1 |
agentRouterVrrpConfiguredTableOperations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
`agentRouterVrrpConfiguredEntry' items. SEQUENCE OF AgentRouterVrrpConfiguredEntry .1.3.6.1.4.1.4413.1.1.2.8.2 |
agentRouterVrrpConfiguredEntryAn entry in the table contains operational priority that is
associated with a virtual router. AgentRouterVrrpConfiguredEntry .1.3.6.1.4.1.4413.1.1.2.8.2.1 |
agentRouterVrrpConfiguredPriorityThis object specifies the value set by the vrrpOperPriority object.
The GET operation on 'vrrpOperPriority' will be affected by both the
tracking process and the configured priority set by the vrrpOperPriority object.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.8.2.1.1 |
agentVrrpOperations OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.9 |
agentRouterVrrpOperTableOperations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
`agentRouterVrrpOperEntry' items.obsolete SEQUENCE OF AgentRouterVrrpOperEntry .1.3.6.1.4.1.4413.1.1.2.9.1 |
agentRouterVrrpOperEntryAn entry in the table contains operational priority that is
associated with a virtual router.obsolete AgentRouterVrrpOperEntry .1.3.6.1.4.1.4413.1.1.2.9.1.1 |
agentRouterVrrpOperPriorityThis object specifies the operational priority of the VRRP router.
This value will be afftected by both the tracking process and the
configured priority set by the vrrpOperPriority object.roobsolete Integer32 .1.3.6.1.4.1.4413.1.1.2.9.1.1.1 |
agentRouterVrrpTrackGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.10 |
agentRouterVrrpTrackIntfTableTracking table for a VRRP router which consists of
agentRouterVrrpTrackIntfEntry items. SEQUENCE OF AgentRouterVrrpTrackIntfEntry .1.3.6.1.4.1.4413.1.1.2.10.1 |
agentRouterVrrpTrackIntfEntryAn entry in the table contains tracked IP interfaces
associated with a virtual router. AgentRouterVrrpTrackIntfEntry .1.3.6.1.4.1.4413.1.1.2.10.1.1 |
agentRouterVrrpTrackIntfThis object specifies the interface to be tracked.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4413.1.1.2.10.1.1.1 |
agentRouterVrrpTrackIfPrioDecThis object specifies the decrement priority of the
VRRP router.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.10.1.1.2 |
agentRouterVrrpTrackIfStateThis object specifies the IP state of the tracked interface
for the virtual router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.10.1.1.3 |
agentRouterVrrpTrackIfStatusThe row status variable, used in accordance to installation
and removal conventions for conceptual rows. To create a row in
this table, a manager sets this object to either createAndGo(4)
or createAndWait(5). The newly created row will be in active state later.
To destroy the row set this object to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.10.1.1.4 |
agentRouterVrrpTrackRouteTableTracking table for a VRRP router which consists of a
'agentRouterVrrpTrackRouteEntry' items. SEQUENCE OF AgentRouterVrrpTrackRouteEntry .1.3.6.1.4.1.4413.1.1.2.10.2 |
agentRouterVrrpTrackRouteEntryAn entry in the table contains tracked Routes
associated with a virtual router. AgentRouterVrrpTrackRouteEntry .1.3.6.1.4.1.4413.1.1.2.10.2.1 |
agentRouterVrrpTrackRtPfxThis object specifies the prefix of the route to be tracked. IpAddress .1.3.6.1.4.1.4413.1.1.2.10.2.1.1 |
agentRouterVrrpTrackRtPfxLenThis object specifies prefix length of the route to be tracked. Integer32 .1.3.6.1.4.1.4413.1.1.2.10.2.1.2 |
agentRouterVrrpTrackRtPrioDecThis object specifies the decrement priority of the
VRRP router.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.10.2.1.3 |
agentRouterVrrpTrackRtReachableThis object specifies the reachability of the
tracked route.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.10.2.1.4 |
agentRouterVrrpTrackRtStatusThe row status variable, used in accordance to installation
and removal conventions for conceptual rows. To create a row in
this table, a manager sets this object to either createAndGo(4)
or createAndWait(5). The newly created row will be in active state later.
To delete the tracked route set this object to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.10.2.1.5 |
agentIpHelperGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.11 |
agentIpHelperAdminModeAdministratively enable or disable IP helper.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.11.1 |
agentDhcpClientMsgsReceivedThe Number of DHCP Requests Received.
Total number of DHCP requests received from all clients.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.11.2 |
agentDhcpClientMsgsRelayedThe Number of DHCP Requests Forwarded.
Total number of DHCP requests relayed to a server.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.11.3 |
agentDhcpServerMsgsReceivedThe number of DHCP messages received from a server.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.11.4 |
agentDhcpServerMsgsRelayedThe number of DHCP messages relayed to a server.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.11.5 |
agentUdpClientMsgsReceivedThe number of UDP messages received from all clients.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.11.6 |
agentUdpClientMsgsRelayedThe number of UDP messages relayed to a server.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.11.7 |
agentSwitchIpHelperAddressTableContains a list of IP helper addresses configured globally. SEQUENCE OF AgentSwitchIpHelperAddressEntry .1.3.6.1.4.1.4413.1.1.2.11.8 |
agentSwitchIpHelperAddressEntryAn IP Helper address that applies to packets received on any interface. AgentSwitchIpHelperAddressEntry .1.3.6.1.4.1.4413.1.1.2.11.8.1 |
agentSwitchIpHelperAddressThe IP Helper address assigned to this interface.rw IpAddress .1.3.6.1.4.1.4413.1.1.2.11.8.1.1 |
agentSwitchIpHelperUdpPortUDP port number.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.2.11.8.1.2 |
agentSwitchIpHelperHitCountThe number of times a packet has been forwarded or discarded according to this entry.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.2.11.8.1.3 |
agentSwitchIpHelperStatusCreates a new entry in the global IP Helper address table.
Allowed values are:
createAndGo(4) - Creates an IP helper entry in this table.
destroy(6) - Removes the IP helper entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.11.8.1.4 |
agentUdpClientMsgsTtlExpiredThe number of UDP messages received with an expired TTL.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.11.9 |
agentUdpClientMsgsDiscardedThe number of UDP messages that matched a discard entry.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.11.10 |
agentInternalVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.12 |
agentInternalVlanBaseThe VLAN ID internally assigned to the first port-based routing interface.rw Integer32 .1.3.6.1.4.1.4413.1.1.2.12.1 |
agentInternalVlanPolicyWhether to search up or down from the base VLAN ID for a free VLAN ID to
assign to a port-based routing interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.2.12.2 |
agentSwitchInternalVlanTableContains a list of VLAN IDs used internally for port-based routing interfaces. SEQUENCE OF AgentSwitchInternalVlanEntry .1.3.6.1.4.1.4413.1.1.2.12.3 |
agentSwitchInternalVlanEntryA VLAN ID internally assigned to a port-based routing interface. AgentSwitchInternalVlanEntry .1.3.6.1.4.1.4413.1.1.2.12.3.1 |
agentSwitchInternalVlanIdA VLAN ID internally assigned to a port-based routing interface. Integer32 .1.3.6.1.4.1.4413.1.1.2.12.3.1.1 |
agentSwitchInternalVlanIfIndexInterface index of port-based routing interface using this VLAN ID.ro Integer32 .1.3.6.1.4.1.4413.1.1.2.12.3.1.2 |
agentOspfQueueGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.13 |
agentOspfQueueTableTable lists information about OSPFv2 message queue utilization. SEQUENCE OF AgentOspfQueueEntry .1.3.6.1.4.1.4413.1.1.2.13.1 |
agentOspfQueueEntryInformation on a specific OSPFv2 message queue. AgentOspfQueueEntry .1.3.6.1.4.1.4413.1.1.2.13.1.1 |
agentOspfQueueIndexIndex value for this message queue. Unsigned32 .1.3.6.1.4.1.4413.1.1.2.13.1.1.1 |
agentOspfQueueNameName of an OSPFv2 message queue.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.13.1.1.2 |
agentOspfQueueLengthThe number of messages currently in the message queue.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.13.1.1.3 |
agentOspfQueueHighThe high water mark of the number of messages in the message queue.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.13.1.1.4 |
agentOspfQueueDropsThe number of items dropped because the message queue was full.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.13.1.1.5 |
agentOspfQueueLimitThe maximum number of messages this queue can hold.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.2.13.1.1.6 |
agentOspfPacketStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.14 |
agentOspfCountersClearedThe time since OSPFv2 counters were last cleared, in seconds.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.2.14.1 |
agentOspfLsaRetxCountThe total number of LSAs retransmitted since OSPF counters were last cleared.
If the same LSA is retransmitted to multiple neighbors, the count is incremented
for each neighbor.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.2 |
agentOspfHellosRxThe total number of OSPFv2 Hello packets received since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.3 |
agentOspfHellosTxThe total number of OSPFv2 Hello packets transmitted since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.4 |
agentOspfDdRxThe total number of OSPFv2 Database Description packets received since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.5 |
agentOspfDdTxThe total number of OSPFv2 Database Description packets transmitted since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.6 |
agentOspfLsReqRxThe total number of OSPFv2 LS Request packets received since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.7 |
agentOspfLsReqTxThe total number of OSPFv2 LS Request packets transmitted since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.8 |
agentOspfLsUpdatesRxThe total number of OSPFv2 LS Update packets received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.9 |
agentOspfLsUpdatesTxThe total number of OSPFv2 LS Update packets transmitted since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.10 |
agentOspfLsAckRxThe total number of OSPFv2 LS Acknowledgement packets received since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.11 |
agentOspfLsAckTxThe total number of OSPFv2 LS Acknowledgement packets transmitted since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.12 |
agentOspfLsUpdatesRxMaxThe maximum rate of OSPFv2 LS Update packets received over any 5-second
interval since OSPF counters were last cleared. The rate is given in packets
per second (that is, the number of packets received during the 5-second
interval, divided by 5).ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.14.13 |
agentOspfLsUpdatesTxMaxThe maximum rate of OSPFv2 LS Update packets transmitted over any 5-second
interval since OSPF counters were last cleared. The rate is given in packets
per second (that is, the number of packets transmitted during the 5-second
interval, divided by 5).ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.14.14 |
agentOspfType1LsasRxThe number of type 1 (router) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.15 |
agentOspfType2LsasRxThe number of type 2 (network) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.16 |
agentOspfType3LsasRxThe number of type 3 (network summary) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.17 |
agentOspfType4LsasRxThe number of type 4 (ASBR summary) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.18 |
agentOspfType5LsasRxThe number of type 5 (external) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.19 |
agentOspfType7LsasRxThe number of type 7 (NSSA external) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.20 |
agentOspfType9LsasRxThe number of type 9 (Link Opaque) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.21 |
agentOspfType10LsasRxThe number of type 10 (Area Opaque) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.22 |
agentOspfType11LsasRxThe number of type 11 (AS Opaque) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.14.23 |
agentOspfSpfStatsTableContains statistics for the twenty most recent SPF runs.
Statistics are reported from the oldest SPF first to the most recent. SEQUENCE OF AgentOspfSpfStatsEntry .1.3.6.1.4.1.4413.1.1.2.15 |
agentOspfSpfStatsEntryStatistics for a single SPF run. AgentOspfSpfStatsEntry .1.3.6.1.4.1.4413.1.1.2.15.1 |
agentOspfSpfIndexInteger that uniquely identifies an SPF run. This value is
incremented each time OSPF runs a full routing table calculation. Counter32 .1.3.6.1.4.1.4413.1.1.2.15.1.1 |
agentOspfSpfStatsDeltaTHow long since this routing table calculation ran. The time is
given in seconds.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.2.15.1.2 |
agentOspfSpfStatsIntraNumber of milliseconds to compute intra-area routes.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.15.1.3 |
agentOspfSpfStatsSummNumber of milliseconds to compute inter-area routes.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.15.1.4 |
agentOspfSpfStatsExtNumber of milliseconds to compute external routes.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.15.1.5 |
agentOspfSpfStatsSpfTotalNumber of milliseconds for entire routing table calculation.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.15.1.6 |
agentOspfSpfStatsRibUpdateNumber of milliseconds to update the common routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.15.1.7 |
agentOspfSpfStatsReasonReasons why a routing table calculation was required.
R - new router LSA,
N - new Network LSA,
SN - new network summary LSA,
SA - new ASBR summary LSA,
X - new external LSA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.2.15.1.8 |
agentRoutingHeapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.16 |
agentRoutingHeapSizeThe size of the routing heap, in bytes. Unicast routing protocols
and ARP allocate memory from the routing heap.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.2.16.1 |
agentRoutingHeapInUseThe number of bytes currently allocated from the routing heap.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.16.2 |
agentRoutingHeapHighHigh water mark for the number of bytes allocated from the routing heap.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.16.3 |
agentRoutingTableSummaryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.17 |
agentConnectedRoutesThe number of connected routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.1 |
agentStaticRoutesThe number of static routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.2 |
agentRipRoutesThe number of RIP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.3 |
agentOspfRoutesThe number of OSPFv2 routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.4 |
agentOspfIntraRoutesThe number of OSPFv2 intra-area routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.5 |
agentOspfInterRoutesThe number of OSPFv2 inter-area routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.6 |
agentOspfExt1RoutesThe number of OSPFv2 external type 1 routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.7 |
agentOspfExt2RoutesThe number of OSPFv2 external type 2 routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.8 |
agentBgpRoutesThe number of BGP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.9 |
agentEbgpRoutesThe number of external BGP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.10 |
agentIbgpRoutesThe number of internal BGP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.11 |
agentLocalBgpRoutesThe number of local BGP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.12 |
agentRejectRoutesThe number of reject routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.13 |
agentTotalRoutesThe number of routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.14 |
agentBestRoutesThe number of IPv4 routes in the forwarding table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.15 |
agentBestRoutesHighThe highest number of IPv4 routes in the forwarding table.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.16 |
agentAlternateRoutesThe number of alternate routes in the IPv4 routing table.
An alternate route is less preferred than the best route and is not used for forwarding.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.17 |
agentRouteAddsThe number of routes added to the IPv4 routing table.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.17.18 |
agentRouteModifiesThe number of routes changed in the IPv4 routing table.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.17.19 |
agentRouteDeletesThe number of routes removed from the IPv4 routing table.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.17.20 |
agentUnresolvedRouteAddsThe number of IPv4 route adds that failed because none of the route's next hops were on a local subnet.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.17.21 |
agentInvalidRouteAddsThe number of IPv4 routes adds that failed because the route was invalid.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.17.22 |
agentFailedRouteAddsThe number of IPv4 routes adds that failed because of a resource limitation in the routing tablero Counter32 .1.3.6.1.4.1.4413.1.1.2.17.23 |
agentReservedLocalsThe number of IPv4 routing table entries reserved for a local subnet on a routing interface that is down.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.24 |
agentUniqueNextHopsThe number of distinct next hops used among all IPv4 routes currently in the routing table.
These include local interfaces for local routes and neighbors for indirect routes.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.25 |
agentUniqueNextHopsHighThe highest count of unique next hops since counters were last cleared.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.26 |
agentNextHopGroupsThe current number of next hop groups in use by one or more routes.
Each next hop group includes one or more next hops.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.27 |
agentNextHopGroupsHighThe highest count of next hop groups since counters were last cleared.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.28 |
agentEcmpGroupsThe number of next hop groups with multiple next hops.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.29 |
agentEcmpGroupsHighThe high water mark of the number of ECMP groups.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.30 |
agentEcmpRoutesThe current number of IPv4 routes with multiple next hops.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.31 |
agentTruncEcmpRoutesThe number of ECMP routes that are currently installed in the forwarding table
with just one next hop. The forwarding table may limit the number of ECMP
routes or the number of ECMP groups. When an ECMP route cannot be installed
because such a limit is reached, the route is installed with a single next hop.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.17.32 |
agentEcmpRetriesThe number of ECMP routes that have been installed in the forwarding table
after initially being installed with a single next hop.ro Counter32 .1.3.6.1.4.1.4413.1.1.2.17.33 |
agentEcmpCountTableA count of the number of routes with each number of ECMP next hops. SEQUENCE OF AgentEcmpCountEntry .1.3.6.1.4.1.4413.1.1.2.18 |
agentEcmpCountEntryNumber of IPv4 routes with a given number of next hops. AgentEcmpCountEntry .1.3.6.1.4.1.4413.1.1.2.18.1 |
agentEcmpNextHopCountThe number of next hops in a route. From 0 to the maximum number of
next hops in an ECMP route. The maximum varies by platform. Unsigned32 .1.3.6.1.4.1.4413.1.1.2.18.1.1 |
agentEcmpRouteCountThe number of IPv4 routes with agentEcmpNextHopCount next hops.ro Gauge32 .1.3.6.1.4.1.4413.1.1.2.18.1.2 |
agentOspfStubRouterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.2.19 |
ospfStubRouterAdvertisementSpecifies how the router LSAs are advertised by the router.
The value doNotAdvertise indicates the advertisement of a
standard router LSA and is the default value. The value
advertise indicates the advertisement of a stub router LSA.ro Enumeration .1.3.6.1.4.1.4413.1.1.2.19.1 |
agentOspfStubRouterReasonThis indicates the reason because of which the router is in Stub mode.
This is valid only if the agentOspfStubRouterMode is 'active'.ro Enumeration .1.3.6.1.4.1.4413.1.1.2.19.2 |
agentOspfStubRouterStartupTimeRemainingThe time remaining (in seconds) for the router to come out of the
stub mode. This is valid only if the agentOspfStubRouterReason is
'startup'.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.2.19.3 |
agentOspfStubRouterDurationTime elapsed (in seconds) since the router last entered the stub
router mode. This is valid only if the agentOspfStubRouterMode is
'active' and agentOspfStubRouterReason is 'resource-limitation'.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.2.19.4 |